Sonstiges, Englisch, Band Volumes 887-888, 1416 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 887-888, 1416 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-709-7
Verlag: Trans Tech Publications
Collection of selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China.
The 268 papers are grouped as follows:
Chapter 1: Composites,
Chapter 2: Micro/Nano Materials,
Chapter 3: Steel/Iron,
Chapter 4: Ceramics,
Chapter 5: Metal Alloy Material,
Chapter 6: Optical / Electrical / Magnetic Materials,
Chapter 7: Energy Materials,
Chapter 8: Biomaterials and Technology,
Chapter 9: Chemical Materials,
Chapter 10: Film Material,
Chapter 11: Building Materials,
Chapter 12: Materials Mechanical Behavior and Fracture,
Chapter 13: Materials Physics and Chemistry,
Chapter 14: Selection, Testing and Evaluation of Materials,
Chapter 15: Surface Engineering / Coatings Technology,
Chapter 16: Material Forming,
Chapter 17: Material Machining,
Chapter 18: Welding and Joining,
Chapter 19: Materials Processing Technologies
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
The Study on Synthesis and Impact Properties of Novel Dual Polymerization of Epoxy Composite Materials to Green Production ProcessInvestigation of the Thermal and Optical Properties of Photopolymerizable Resin Enforced by Nanopowder in the Green Production ProcessAnalysis of Micro Structure and Elastic Property on 3-D Tubular Woven Carbon Fiber CompositeEffects of CeO2 Addition on Mechanical Properties of LaB6/B4C CompositesOn the Damping Properties of a Polyurea ElastomerPreparation and Characterization of Phosphorus Removal Agent by Lanthanum-Copper Composite OxideMicrostructure and Properties of the Dispersion-Strengthened Cu-ZrO2 Composite for Application of Spot-Welding ElectrodeStudy on the Mechanical Properties of Steel - Polyurethane TubeThe Study of Impact Rule of Si Element on Cu/Al Composite Interface CompoundsPreparation and Thermal Properties of Polybenzoxazine/TiC HybridsStudy on the Surfactant/Polymer Combination Flooding Relative Permeability Curves in Offshore Heavy Oil ReservoirsAnalysis of Composites for Best Designs of Refractive Solar ConcentratorsExperimental Investigation into Spall of Carbon Phenolic CompositesStudy on CF Reinforced Interface Properties of PES-C Resin Matrix CompositeThermal and Mechanical Properties of Aluminate Cementitious Functional Materials Enriched with Nano-SiO2 for Thermal Energy StorageModel I Interlaminar Fracture Toughness of Carbon Fiber Reinforced Polymer Matrix CompositesThe Influence of Bi2O3 on SiO2-Al2O3-B2O3-RO Glass PropertiesartsStudy of Synergistic Effects of Cerium Oxide on Intumescent Flame Retardant Polypropylene SystemA Copolymerization Modified Acrylate Resin and its Polyhedral Oligomeric Silsesquioxane CompositesDesign and Experiment of T-Shape Glass Micro-Nozzle for Preparation of MicrocapsulesMorphology Controllable Preparation of Gold Nanoplates through an Eco-Friendly Wet-Chemical RouteResearch on the Conductive Property of CNT Nanopaper Facilitates the Actuation in Shape Memory Polymer CompositesThe Crystallization Research on the Zr-Based Bulk Metallic Glasses by Ion ThinningInfluence of Temperature on the Preparation of GaN NanowiresThe Effects of Discharge Parameters on the Surface Morphology of Nickel Microspheres by EDM Combined with Ultrasonic FieldThe Preparation of Porous TiO2 Nanostructure by Triblock Copolymers Co-Templating Method of TiOSO4 Solution Derived from Ilmenite OreCatalytic Degradation of Phenol by ?-Fe2O3 NanoparticlesSize-Dependence of Photoluminescence Property of ZnO NanoparticlesControlling the Size and Dispersion of ZnO@SiO2 Core-Shell Nanostructure by Addition of Triblock Copolymer Surfactant and pH Adjustment during Precipitation and Encapsulation ProcessEnhancing the Fluorescence of Graphene Quantum Dots with a Oxidation Way2D Assembly of Palladium Nanoparticles and AFM CharacterizationBlocking Temperature of the System Core-Shell NanoparticlesGrowth Environment of Carbon Nanotubes by DC-PCVDReliable Solvothermal Growth of Diverse Heterostructures Based on CdS NanowiresHydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activities of Bi2WO6 Uniform Hierarchical MicrospheresStudy of Inclusion?s Source and Character in Different T[O] ContentThe Influence of Transient Casting on Inclusions in SteelThe Optimization of the Temper Technology of Production about Soft SteelHot Ductility of Low Carbon Nb-Microalloyed Weathering SteelInfluence of Heat Treatment on Mechanical Properties and Microstructure of Low Alloy Cast Steel (ZG25MnNi)Effect of Hydrogen Induced Additional Stress on the Influence on High-Strength SteelsInfluence of Milling Time on Morphology and Properties of Precursor Powders for 9Cr Oxide Dispersion Strengthened SteelA Study on the Microstructure and Hardness Feature of 6CrW2MoVSi Steel after Heat TreatmentMicrostructure Observation of the Tensile Fractured 430 Ferritic Stainless SteelInfluence of Oxide Morphologies on the Galvanizability of the Third Generation Automotive SteelEffect of Heat Treatment Processes on Microstructure and Mechanical Properties of Nb-Ti-Stabilized 430 Stainless Steel PlateResearch and Implementation of the Data Fitting Algorithm for Testing the Metallurgical Performance of Iron OreThe Research of Non-Oriented Electrical Steel Processed by Stress Relief Annealing ExperimentsDesigning Q&P Process for Experimental Steel with 0.47 % Carbon Content?Raman Analysis of the Rust Layer on Rusted Cast Iron ArtifactsSource of Inclusion in IF Steel End SlabsMultiaxial Fatigue Life Prediction of 50CrVA Spring Steel under Proportional LoadingEffect of Austenitizing Processes on Isothermal Quenching Microstructure in Bearing SteelEffect of Carbon Content in Direct Reduction Process of Limonite Iron Oxide to Produce Pig Iron Substitute for Thin Wall Ductile Iron ProcessInvestigation on Electrical Properties of CaCu3Ti4O12-Modified (Na,Bi)TiO3-BaTiO3 Lead Free PiezoceramicsBrief Introduction of Microwave Ceramics Developed in our Labs for Dielectric ResonatorsThe Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering AidStructure and Performance of Calcined BauxiteMicrostructure and Compression Deformation Behavior in the Quasicrystal-Reinforced Mg-6Zn-2Y Alloy Solidified under Super-High Pressure at Room-TemperatureResearch on Compressive Behavior and Deformation Heating of 7075-T6 Aluminum Alloy during Hot CompressionAircraft Bearings Fracture Failure AnalysisAn Experimental Investigation on the Solubility of Zr in Cu-Sn AlloysGrain Structure and Precipitates in Squeeze Casting Al-Li-Mg-Zr AlloyDynamics of Phase Transformation in Cu-Cr-Zr AlloyEffects of Structures of Zinc/Substrate Interface on Coating Adhesion of Hot-Dip Galvanized DP SteelsCube Texture Formation of Cu-33at.%Ni Alloy Substrates and CeO2 Buffer Layer for YBCO Coated ConductorsResearch on the Microstructure and Properties of Hypereutectic Al-Si Alloy for Semi-Solid Forming during Heat TreatmentCorrosion Behavior of Incoloy 800 in Molten Nitrate SaltEffect of Ti on the Structure and Properties of Cu-15Ni-10Mn Alloy As-Cast Smelted at AtmosphereInfluence of Etchants on Phase Morphology of Casting Ni-Based SuperalloyThe Measured Change in d-Electron of Ni in Ni-7.2at%Ti Alloy Studied by Electron Energy Loss SpectroscopyEffect of Homogenization Annealing on Microstructure and Property of Cu-7.5Ni-5Sn AlloyEffect of Alloying Elements V, Cr and Ni on the Electronic Structure and Mechanical Properties of FeAl from First-Principles CalculationEffects of Additives on the Surface Layers of Boronized TC4 Titanium AlloysCharacterization on the Microstructures and Optical Performances of TiO2 Doped with Transition MetalsDynamic Strain - Induced Boundary Migration during Dynamic Recovery at a High Temperature Deformation with a Lower Strain RateNumerical Analysis of Residual Stresses in Quenched High-Strength Aluminum Alloy Ultra-Thick Plates and their Reduction through Single-Side Cold Compression MethodInfluence of Three Pattern Materials on the Marginal Adaption of Co-Cr Alloy Inner Crown of PFM EndocrownThe Thermally Stimulated Current (TSC) Technique on Evaluating Degradation of ZnO VaristorsDesign and Analysis of Self-Collimation-Based Photonic Crystal Beam SplitterElectronic Structures and Spectral Properties of 4-Thiophene-1,8-Naphthalimide DerivativesFabrication of Shape Controllable Micro-Lens Arrays by Drop on Demand Printing on the Glass Micro-Holes ArraysAnalysis and Design of Transparent Microwave Absorbing Materials Based on the Destructive Interference at the Microwave RangeCharacteristics of Slow Light in a Photonic Crystal Coupled-Cavity WaveguideInvestigation on p-In0.51Ga0.49As LOPC Mode by Raman SpectraInfluence of the Nitridation Time after the Al Pre-Seeded Layer on the Properties of GaN Layer Grown on Si (1 1 1)Growth and Spectrum Properties of Ho:BaY2F8 CrystalPreparation and Surface Modification of SiO2 Particles Used in Electronic InkThe Photoluminescence Enhancement and Stability of Porous Silicon by Cathodic Reduction and Acid TreatmentEpitaxial Growth of SiC Epilayers for 10kV Schottky Diodes Using Chloride-Based CVDMicrostructure and Compound Developed from the Ce-As-Fe at 1173KCurrent Research of Biodiesel Used on IC Engine and Improved Measures of EmissionsHot corrosion resistance of four graphite material in molten Solar SaltCurrent Situation of the Study on Oxidative Stability of BiodieselThe Study on Oxidation Resistance of SiC Composites Used for Solar Absorber CoatingInfluence of Activated Carbon to the Hydrogen Storage Characteristics of THF HydrateThe Ni-MH Power Battery Electrode Material Admixture Process Fuzzy Control SystemKinetics Studies on Chemical Reaction of Producing Biodiesel Based on TransesterificationAlpha-Glucosidase Immobilization Based on PMMA/Chitosan Core-Shell MicroparticlesAntibacterial Activity of the Extracts from Gentiana farreri Balf. f.Research on Compound Bone Oyster Sauce and its DevelopmentA Preliminary Study of Crosslinked Alginate-Chitosan Microspheres for Delivery SystemThe Structure Design and Fabrication of Drug Releasing Porous MaterialThe Chemical Swelling Effect on Poplar APMPEffects of Cellulase Treatment on Surface Structure of Fast-Growing Poplar APMP PulpVasorelaxation of Rat Aorta Induced by Extract from Clerodendranthus spicatusGlutaraldehyde Cross-Linked Silk Fibroin Films for Controlled ReleaseAMPK and Metabolisms of Glucose and LipidIsolation and Characterization of Abietic AcidComparison of Physicochemical Properties of Gelatins Prepared from Different Fish Skins through Hot Water Extraction at Mild Temperature ConditionEstablishment of a Sensitive Nitric Oxide Bioassay for Bioscreening ApplicationPreparation and Properties and Application of Renewable Source (Palm Oil Polyol) Based Polyurethanes Coatings and its Thermal Stability Improvement by Clay NanocompositesProduction of Liquid Fuel by Catalytic Reformation of Carbohydrates in Energy CropsPhysicochemical Characterization of Oxidatively Degraded Calcium Lignosulfonate via Alkaline Hydrogen PeroxideEffects of Uranium (VI) Stress on Growth and Antioxidant System in Chinese CabbageThe Development of the Multi-Functional Wool/Aramid 1313 Blended FabricAnthocyanins Extracted from Chinese Blueberry and its Anticancer Effects on HepG2 CellsApplication of Ferritin Modified Eggshell Membrane in Heavy Metal Ion Uptake and RecoveryPreparation and Antioxidant Activities of Peanut (Arachin conarachin L.) Protein Peptides by Bacillus Subtilis Solid State Fermentation MethodOptimization of Aflatoxin Production of Aspergillus flavus on PeanutsStudy on Antibacterial Mechanism of Hemp Fiber The Effect of Different Salt Additions on the Microstructure of YBCO Synthesized by a Biomimetic MethodThe Sensory Quality and Textural Property of Ready-to-Eat Sea Cucumber in Storage PeriodApplication of Matlab Data Processing System in Research of Drug MicroemulsionStudy on Effect of Rice Flour on Isothermal Crystallization Kinetics of Biodegradable Poly(L-Lactic Acid)Finite Element Analysis Based Ultrasonic ElastographyTechnique Status and Prospect of Synthetic RutileStudy on the Physicochemical Properties of the Mixture of Water and 1-butyl-3-methylimidazolium Hydrogen Sulfate Salt Ionic LiquidsFunction and Application of Calixarene DerivativesStudy on the Clean Production Process of Basic Chromium SulphateTo Measure the Absorbance at 328nm by Ultraviolet-Visible Spectrophotometer - an Alternative Pathway to Measure the Activity of AcetylcholinesteraseFacile Synthesis and Crystal Structure of N-(3-Cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-2,2,2-trifluoroacetamideStudy of Phenyl Phenol Formaldehyde Resin and its Curing Performance of AnilinePreparation and Characterization of High Porosity and High Oil-Absorbent Block CMCS AerogelTheoretical Study on the Isomerization Reaction Mechanism of the Chain-Isomers of N9H9Controllable Preparation Cu2O/AC and Application in Photocatalytic Degradation of Organic DyesPolymerization and Chiroptical Behavior of Polymethacrylamides Bearing a Bulky Oxazoline PendantPreparation and Photocatalytic Performance Study of Na+/K+-WO3 by Ultrasonic Micro MethodStudy on the Strengthening of Kraft Liner Board by the Application of Series WEC Cleaner Papermaking ChemicalsSynthesis and Crystal Structure of 4-[5-(2-Bromophenyl)-1,3,4-Thiadiazol-2-Ylthio]-2-(trifluoromethyl)thieno[2,3-d]pyrimidineExperimental Study on the Effective Separation of Chromium-Iron Ions in Multi-Component Solution System by Ihleite MethodPreparation of Modified Polyurethane Fiber and Study of its Lead Ions AdsorptionIsothermal Crystallization Behavior and Kinetics of Poly (lactic acid) Filled with a Novel Nucleating AgentStudy on the Prepartion of Slag Haycite for Phosphorus Removal Using Ammonium Hydrogen Carbonate as Pore FormerPreparation and Characterization of Polyurethane Foams from Modified Rosin-Based Polyether PolyolSynergistic Inhibition of Sodium Molybdate and Sodium Silicate on Carbon Steel in KCl MediaMagnesium Diboride Superconducting Films Synthesized by Different Electron-Beam Annealing CurrentsNumerical Simulation of Film Thickness Uniformity Deposited by Planar Circular Magnetron Sputtering SystemEffect of Cobalt Concentration on the Microstructure of Nickel-Cobalt Alloy DepositsElectrochromic Properties of Co3O4/NiO Nanocomposite FilmsThermal Stability of Ultralow k Carbon-Bridged Periodic Mesoporous Organosilica FilmStudy on Preparation of SnO2 Polyacrylate Thermal Insulation Film with Liquid Phase Precipitation ProcessInvestigation of the Preparation of Anodized Nanoporous Alumina ArrayMorphology and Orientation in Thin Film of Polystyrene-b-Polylactide Prepared by Solution-CastingBiofilm-Electrode Process for Nitrate Removal from Micro-Polluted WaterEffective Anisotropy Constant of Bilayer FilmCharacterization of TiO2 Thin Films Prepared by Vacuum EvaporationInfluence of Calcium Carbonate Powder on Water Requirement and Flowability of Self-Compacting Mortar Incorporating Bagasse AshDevelopment of Reinforced Structure Designed Composite PavementDesign and Experiment on the Road Pavement for Rush to RepairUsage of Steel Slag in Concrete as Coarse AggregatesUsability of Fly Ashes from Czech Republic for Sintered Artificial AggregateEffect of Surface Modification of Steel Fiber on Concrete Comprehensive PerformanceExperimental Study of Compression and Carbonation in Concrete Subjected to Freeze-Thaw EnvironmentEffect of Coconut Coir Uniformity on Strength of Unfired Soil Lime BricksSize Effect on Mechanical Properties of LVLInfluence of the Organic and Mineral Additions in the Porosity of Lime MortarsResearch on the Mix Design of Cement Asphalt ConcreteEffects of Artificial Silica Fume on Compressive Strength and Workability of Self-Compacting ConcreteExperimental Research on the Impact Damage of Composite Laminates at Different EnergiesDeposition Effects on the Ultimate Strength of Tungsten AlloyStudy on the Strength Properties of Superior Shoes Board and FurnishA Comparative Study on the Performance of Domestic Cellulose Based Pressboards for Use in TransformersModel of Equal-Stressed Cylinder Based on the Mohr Failure CriterionFatigue Properties of Titanium Alloy TA11 under Multiaxial Loadings with Tension - Bending VibrationStudy of Damage and Acoustic Emission Properties of Rocks under Uniaxial Cyclic Load-UnloadEffect of Consolidation with Alanine and Glutaraldehyde on the Properties of Fragile Wool FabricsThe Influence of Temperature and Load on Dry Sliding Wear and Friction Property of Low Metallic Friction MaterialStudy on the Mechanical Property of Nomex Fiber in Different TemperatureAnalysis of Hot Oil Pipeline Stress Influencing FactorsLaboratory Investigation on Mechanical Behavior of Artificial Ice under Triaxial CompressionFormulation of Equivalent Plastic Strain Accumulated in Rotating Bending Process of Metal Tubes for Severe Plastic DeformationStudy on Development of Hemp Stem-Based PanelOptimization of Superior Shoes Board Immersion ConditionThe HAM Solutions for Unsteady Boundary Layer Flow and Heat Transfer with Heat Source/SinkInfluence of Vibration Stress Relief (VSR) on the Residual Stress and Microstructure in Welded Plate of DH36 Low Alloy High Strength SteelThe Way of Obtain C3H4O+ Fragments Laser-Induced by Cycloheptanone IonExcited StateThe Pressure of CO2 Crystal Melting Temperature DependenceThe Thermal Decomposition Characteristics of Sodium Pyroxenite Gangue in Baiyunebo Iron OreCorrosion Characteristics of Grounding Grid in Resistance-Reducing AgentsKinetics of Rubber-Modified Nylon 6Research on the Kinetics of Nylon Polymerized by Caprolactam Anionic Polymerization Using Adiabatic MethodSkyrmion Excitations in GrapheneFirst-Principles Calculation of the Vacancy Formation Energy in VCAntiplane Response of Cylindrical Inclusion with Eccentric Crack to Incident SH WavesThe Characteristic Dissolution and Physical Chemistry Parameter of Synthetic PyromorphiteMathematical Simulation and Experimental Investigation of Propranolol Hydrochloride Loading/releasing from Ion Exchange FibersStudy of Selected Characteristics of a Dry Cell Hydrogen Generator in Conditions of Long Term OperationAn Easy Route for the Preparation of Soluble High Molecular Weight Polymer Under Friedel-Crafts ConditionsPyrolysis Characteristics of Blends from Coal and PolyethyleneThe Correction Factor in Elastic Modulus Determining by IndentationShadowgraph of Pulse CO2 Laser Induced Breakdown in Different Pressure AirThermal Decomposition of Phosphate Ore by Using Differential Scanning Calorimetric MethodA Material Selection Method Based on Finite Element MethodResearch on the Regular between Concentration of Superfine Powder Extinguishing Agent Explosion Scatter and Fire-Extinguishing AbilityThe Affecting Gene Research of Metal Sheet Drawing Force on Compensate Fuzzy Nerve Net ControlThe Study on the Pipe Retracting Shape Parameter Identify of Quantum and Immunity AlgorithmParameters Identification of Johnson-Cook Constitutive Equation for Aluminum BrassQuality Control of Materials in Pressure Pipeline during the InstallationApplication of Distribution of Oxygen Coefficient in Explosive Neutron DetectionResearch and Manufacture of Tea-CigaretteFatigue Propagation Life Evaluating for Materials or Components Suffered Load Spectrum by Quantitative FractographyStudies of Surface Roughening for Sapphire SubstrateReview of Conductive Coating and its Application in Power Grounding SystemDesign of a Simple and Demountable Experimental Device for Drag Reduction of Super Hydrophobic SurfaceCharacterization of Microstructure, Phase Composition and Corrosion Resistance of Al-Zn-Si-RE Waterborne CoatingsThe Application and Analysis of EDM on the Surface Light Trapping StructureCharacteristics of Inconel 718 Filler Metal Affecting to Welding Metal Zones of Cast Steel for Piston Crown MaterialStudy on Macroscopic Morphology and Microstructure of Single Ni60 Laser Clad Tracks Prepared Using a Variable Laser Beam ShaperComparison of Surface Properties of TiN and TiAlN Coating Prepared by Arc Ion Plating for the Improvement of Life-Time Extension of Tool SteelSurface Roughness Study of Milled Carbon Fiber Reinforced Polymer (CFRP) Composite Using 4 mm 2-Flute Titanium Aluminum Nitride (TiAlN) Coated Carbide End MillsStudy on the Fractal Behavior and Fractal Characterization of Guide Way Joint SurfaceEffect of Ca2+ on Structure and Corrosion Resistance of Conversion Coating Formed on Cast AZ91D Magnesium AlloysSurface Modification of Titanium and its Alloys for Biomedical ApplicationTemperature Field Simulation of Laser Heated 1045 Steel Using with Shaped Laser Beam ProfilesTemperature Controlling System Design of Non-Isothermal Deep Drawing Mould for Magnesium Alloy SheetStudy on Micro Hydroforming of MetalsApplication of Mass Scaling Technology in Steel Tube Rolling by Finite Element SimulationThe Research on the Simulation Metal Flow in Forging of Bevel GearsMulti-Objective Optimization and Research of Hot Stamping Process ParametersMicrostructure Analysis on GMAW Additive Manufacturing Parts Constrained by ElectromagnetismMini-Thixoforming of High-Alloyed CPM REX 121 SteelCharacterization of Hot Deformation Behavior of Udimet720Li Superalloy Using Processing MapThe Research on Penetration of New Annular MEFPExtracting Acoustic Emission Signal Feature of Grinding ProcessingTwo-Step Identification of Instantaneous Cutting Force Coefficients and Cutter RunoutExperimental Research of Workpiece Temperature in Orthogonal Turn-Milling Compound MachiningCutting Force Model for Heat Assisted Titanium Alloy MillingOptimization of Cutting Conditions of YG15 on Finish Cutting in WEDM Based on Taguchi MethodThe Effect of Cutting Process Parameters on the Stability in MillingCutting Performance of TiB2/WC/h-BN Micro/nano Composite Gradient Self-Lubricating Ceramic Tool when Machining Carbon SteelCombined Atomistic-Continuum Modeling of Nano-EDM ProcessInfluence on BTA Boring Bar Transverse Vibration Considering Inner Cutting Fluid Velocity and Axial ForceDirectly Manufacturing Table Tennis Mould by Hybrid Plasma Deposition & MillingThe Straightening Scheme Analysis for the Copper-Clad Steel TubeEffect of Alumina Bubbles on Mechanical Properties and Microstructure of Metal Bond for Superabrasive Grinding WheelsGermanium Crystal Anisotropy Affecting to Cutting Force in SPDTThe Cutting Parameter Affecting to Surface Roughness in Single-Point Diamond TurningFast Prediction Model for Closure Pressure in Hot Isostatic PressingNumerical Simulation of the Orthogonal Cutting of Carbon Fiber Reinforced Composite MaterialPowder Particles Grinder Mechanism Design and Exploration ToolKinematics Analysis of a 6-DOF Riveting Manipulator Based on ADAMSA Performance Study on Self-Piercing Riveting and Adhesive Hybrid Joints of Different AdhesiveA Performance Study of Clinched Joints with Different MaterialApplication of the Laser Welding Technique in Aircraft RepairMicrostructure and Hardness of Friction Welded SSM 356 Aluminium AlloyNumerical Simulation of Temperature Fields by Welding of Ti-Al Alloys Applying Volumetric Heat SourceTopology Optimization and Robust Analysis of Welding Spot Layout for a Heavy Duty Truck Cab Based on Element Strain Energy DensityStudy on Arc and Drop Transfer Behaviors of DCEN MAG WeldingEvaluation of Welding Metal Zones in the Case Welded with 0.5 Mo Filler Metal to Forged Steel for Piston Crown MaterialEffect of Heat Treatments on Microstructure and Mechanical Properties of Low Carbon Steel Pipes Welded by Induction ProcessNumerical Simulation on Stress Field in Inside-Beam Laser CladdingThe Research on Ceramic Friction and Flow Stress of Plastic Forming6D Laser Measurement System Based on Double Longitudinal Modes LaserInfluence of High Energy Ball Mill Technology on Cube Texture Formation of Ni-8at.%W Alloy Substrates for YBCO-Coated ConductorsThe Effect of Electromagnetic Pulse Treatment on Thin ? Wall Bearing Ferrules Dimensional AccuracyMulti-Objective Optimization for Rolling Schedule of High Strength Sheet Based on ACPSOThe Grey Relation Analysis of Hemp Fiber Fineness and Chemical Composition after Plasma Assisted Degumming
