Sonstiges, Englisch, Band Volumes 652-654, 2754 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 652-654, 2754 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-399-0
Verlag: Trans Tech Publications
The 508 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Micro/Nano Materials and Ceramic;
Chapter 3: Polymers and Biomaterials;
Chapter 4: Optical/Electronic/Magnetic Materials;
Chapter 5: Chemical Materials and Technologies;
Chapter 6: Energy Materials;
Chapter 7: Iron and Steel;
Chapter 8: Metal Alloy Materials;
Chapter 9: Materials for Building and Structures;
Chapter 10: Mechanics of Materials;
Chapter 11: Environmental. Research, Friendly Materials and Recycling Waste Technologies;
Chapter 12: Surface Engineering/Coatings;
Chapter 13: Materials Forming;
Chapter 14: Materials Machining;
Chapter 15: Welding & Joining;
Chapter 16: Laser Processing;
Chapter 17: Casting and Solidification;
Chapter 18: Geology and Mineral Processing.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Effects of Void on Physical Properties of Hygrothermal Conditioned CFRPFlammability and Mechanical Properties of Intumescent Flame Retarded PP/EVA CompositesPreparation and Characterization of Graphene/RTV Silicone Rubber CompositesRole of Multiwalled Carbon Nanotube on Mechanical Reinforcement of High-Density PolyethyleneThe Mechanical Property of CFRP Laminates with VoidsThe Static Mechanical Properties of Carbon/Epoxy Composite Laminates with VoidsCompressive Behavior of Spark Plasma Sintered CNT Reinforced Al2124 and Al6061 NanocompositesBentonite Composite and FibreExploration of Al Matrix Composites Reinforced with Al-Ti Intermetallics/Ti Metal Compound Spherical AgentsLinear Defect States of Phononic Crystal Thin Plates ? An Application of Finite Element MethodEffects of Delaminations on Vibration Characteristic for HT3/5224 Carbon Fiber Reinforced Laminated PlateElectrical Property of Carbon Nanotubes/Epoxy Resin/Polyetherimide Composites with Inverted-Phase StructureFabrication and Microstructures of WC-Based Composites by Plasma Jet MetallurgyMicrostructure and Wear Properties of In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix CompositesPreparation of High-Filled Talcum Masterbatch and its Application in PolypropyleneSelective Distribution of Carbon Black in Epoxy Resin/Thermoplastic Multiphase CompositesThermal Analysis for Fiber-Reinforced Composites Containing Inhomogeneous Interphase Subjected to a Radial ConstraintSynthesis and Properties of Flame-Retardant Waterborne Emulsion Derived from O-Cresol Formaldehyde Epoxy ResinA Comparative Investigation on Foamability and Structure of Al Foams Added with Precipitator and Cenosphere Fly Ash ParticlesMechanical Properties and Morphology of Long Glass Fiber Reinforced PP CompositesHydriding Characterization of La2Mg17-Ni Composite Materials by Mechano-SynthesisPreparation of TiC Hard Metal by Presssureless Infiltration MethodCharacter Alteration Research on Fe3O4 /PVA Susceptible Composite FilmEffects of PP-G-MA and Epoxy Resin on Morphology and Mechanical Properties of the PP/LGF CompositesStudy on Properties of Epoxy Resin /Al2O3 CompositesStudies on Curing Kinetics of Epoxy Resin / Modified Amine SystemEpoxy Resin (EP) / Nano-SiO2 Composite Material Preparation by Two ProcessesPreparation of Stearic/Montmorillonite Composite as Form-Stable Phase Change MaterialSimulations and Experimental Validation of Compression Properties of SiC/Fe?20Cr Co?Continuous CompositesNumerical Simulations of Uniaxial Compression Properties of SiC/6061 Aluminum Alloy Co?Continuous CompositesThe Isothermal Simulation of the Un-Saturated Flow in the Dual-Scale Porous MediaDiameter-Controlled Synthesis of Single-Walled Carbon NanotubesDirect Electrodeposition of Highly Ordered Au-Cu Alloy Nanowire ArraysEffect of High Shear Mixing Parameters and Degassing Temperature on the Morphology of Epoxy-Clay NanocompositesEffects of Processing Techniques on Morphology and Mechanical Properties of Epoxy-Clay NanocompositesEvaluation of Residual Iron in Carbon Nanotubes Purified by Air and Acid TreatmentsExperimental Studies on Micro-Characteristics of Nanocrystalline MgOFormation Mechanism of Polyaniline Nanostructures in PEG SolutionA Modified Monte Carlo Method for Phonon Radiative Transfer in Nanoscale MaterialsMicrostructure and Optical Properties of ZnS:Mn NanocrystalsScallion-Root-Shaped GaN Nanorods Grown by Two-Step Method and Study on their PropertiesSynthesis and Characterization of Carbon-Encapsulated Nickel Nanoparticles from De-Oiled AsphaltA Mild and Efficient Approach for the Reduction of Graphene OxideCompression Behavior and Mechanical Modeling of Nanocrystalline Ni under High Strain Rate LoadingHollow Structure of CdSe by W/O Microemulsion MethodPreparation and Characterization of Micron Silicon Dioxide Spherical ParticlesPreparation of Nitrogen Hybrid Ordered Mesoporous Carbons from Melamine-Phenol-Formaldehyde Resoles by Soft-Template MethodStudy on a Preparation of PS Hollow Submicro-Fiber by Coaxial ElectrospinningComparison between Dextran-Coated Superparamagnetic Iron Oxide Nanoparticles and Magnetoliposome on Rabbit Corneal Endothelial Cells LabelingPreparation and Characterization of MnO2 Loaded CuO NanosheetsPreparation of Fe (III) ? Amidoximated PAN Nanofibers Complexes for Degradation of Azo Dye under Visible Light IrradiationSynthesis of Chitosan-Stabilized Gold Nanorod Using TripolyphosphatePreparation of Nanoparticles of Calcium Oxalate DihydratePreparation of Dandelion-Like Nano/Micro Zinc Oxide MaterialThe Research on the Photocatalytic Performance of one Kind of Nano Zinc OxideMolecular-Dynamics Simulation of Structure Change for a Molten Cu297 Nanocluster during Rapidly QuenchingSynthesis of ZnO Nanowires for Hydrogen Sensor Application Using Simple Heating TechniquePreparation and Characterization of Shellac/Polyvinylpyrrolidone Nanofiber as a Material for Medical ApplicationStable Dispersed Graphenes Prepared by the Reduction of Graphene Oxides with Mercapto AcidA Study on Crystallization of Fused Silica/Zirconia Ceramic CompositesLamination of Green Ceramic Tapes in the Manufacturing of Multilayer Ceramic DevicesPerformance Study of Composite Clay Instead of a Single Plastic ClayPredicting the Mechanical Properties of Electric Porcelain Using ANN and MLREffects of the Content of ZrO2 Nanoparticles on the Microstructure and Properties of Al2O3-TiC-ZrO2 Micro-Nano-CompositesResearch on Mullite-Corundum-Aluminium Titanate CompositeResearch on Polymerization of PMN-PZT Piezoelectric Ceramic by Gelcasting Using NMAM SystemSol-Gel Preparation and Infrared Radiation Property of Zinc-Substituted Cordierite CeramicsSize Influence on Magnetic Properties of Nickel Hollow SpheresPreparation and Microwave Absorbing Performance of Co-Cu-Ni Ferrite/Multi-Walled Carbon Nanotubes CompositesCharacterization and Properties of UV-Cured Epoxy Acrylate/POSS NanocompositesFacile Preparation of Polylactic Acid/Ketoconazole Composite Microspheres by Oil/Water Solvent Evaporation MethodElectrical Properties of Pt Nanowires Deposited with Focused Ion BeamStructural Stability and Electronic Properties of Fe-Doped B13C2: First-Principles InvestigationThe Preparation and Study of Graphene Supported CoxMn3-XO4 Nanocomposites as Advanced Oxygen Reduction Reaction ElectrocatalystShape-Controlled Synthesis and Pattern Recognition of Dendritic Co3O4 SuperstructuresOxidation Resistant of Silicon-Boron Pitch Carbonization ProductStudy on the Influence of Porous Anodic Alumina Membrane on Separation of Hydrogen and MethaneEffects of Solid Content on Properties and Structure of PMN-PZT Green Body by GelcastingCharacteristics of Alumina Films Formed by the Annealed Aluminum Films at High Temperatures in AirRheological Properties and Crystallization Behavior of Poly(trimethylene Terephthalate) Blends with PBPCSPreparation and Properties of Copolyimides Containing Fluorine and Alicyclic GroupPreparation of PMAM-B-PNVP and its Hydrolysate by RAFT Polymerization: Structure Characterization and its CO2 Permeation PerformanceSynthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-Opening Polymerization and Degradability ResearchScreening and Identification of ?-Glucosidase Producing Strain of Fusarium OxysporumStudy on Formula of New Type Flame Retardant PolyethyleneStudy on the Preparation and Properties of the Phosphorus-Containing Flame Retardant PET CopolymerBranched and Responsive Antimicrobial Polymers Based on Modified PVA for Functionalizing of Cellulose FibresGraft Copolymeriztion of Glycidyl Methacrylate/Styrene onto Polypropylene in Solid StateMaleic Anhydride Grafted Polymers Toughening and Flame Retardant Polystyrene Study on ModificationR-ATRP of Acrylamide under the Action of Copper Complex System in Aqueous Two-PhaseStudy on Hydrolysis Conditions of Flavourzyme in Soybean Polypeptide Alcalase HydrolysateStudy on Soybean Polypeptide Refining ProcessComparison of Different Extraction Methods for Antioxidant Property of Flavonoids from Pomelo PeelA Novel Effective Y-Shaped Silicon Stent for Treating Canalicular LacerationExtraction of the Pectin from Virginica Stem Bark and Study on its Structure and CompositionSynthesis and Properties of Biodegradable Liquid Crystalline Poly(ester-Urethane)s Based on Poly(L-Lactic Acid)Preparation, Characterization of Substituted Aromatic Heterocyclic Phosphate Salts and the Application in Isotactic PolypropylenePreparation and Research of the Multifunctional Heat Stabilizer with Rare Earth Used in PVC ProductsThe Microstructure of Polyurethane (PU)/Ethylene-Vinyl Acetate (EVA) Polymer Lastomer of AnalysisZinc Hydroxystannate-Coated Mineral Grade Mg(OH)2 as Flame-Retardant and Smoke Suppression for Flexible PVCFlame Retardant Low Density Polyethylene with Aluminium Hydroxide/ Commercial Fire Retardants FR01 Synergistic SystemConstruction of Dendritic-Linear Brushes on Silica Nanoparticles by Electrostatic AssemblyStudy on the Optimization of Copolymerization Conditions of LASP/AA/AM PolymerNonisothermal Crystallization Kinetics of Isotactic Polypropylene Filled with a Novel Nucleating AgentAssessment of Functionality of Aged Cables at Loading by Heat FluxExperimental Research on Co-Gasification of Crude Glycerin and Corn CobMicrostructural, Optical and Electrical Properties of ZnO:Sn Thin Films Deposited by Sol-Gel MethodOptical Constants of Quartz Glass in 1.34-4.20?m Spectral RangeOptical Studies of Poly (N-Carbazole) (PVK) Blending with Polyvinylpyrrolidone (PVP) Using Tauc/Davis-Mott ModelRefractive Index Dispersion and Optical Dielectric Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) BlendsThe Potential Realization of Solar-Blind Ultraviolet Detecting Using ZnO-Based Alloy Thin FilmTwo-Photon Absorption Properties of s-Triazine Derivatives With Near Octupolar SymmetryCombustion Synthesis of CaMoO4:Eu3+, Li+ Red Phosphors Using Urea-Thiourea Mixture FuelsExcitation and Emission Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends Characterized by Fluorescence SpectroscopyFirst-Principle Calculation on Misfit Layered Cobaltite and La-Doped SeriesFluorescence and Energy Transfer in Er3+/ Nd3+ Co-Doped Oxy?uoride Tellurite GlassHollow Spherical CaMoO4:Eu3+, Li+ Phosphors Prepared by Spray PyrolysisInfluence of Coating Content on the Magnetic Properties of Iron-MnZn Ferrite Soft Magnetic CompositesPreparation and Characterization of SrAl2O4:Eu2+ by Microwave - Combustion MethodStudy of Structural and Electrical Transport Properties of Polycrystalline La1-XCaXMnO3 (x=0.33, 0.5 and 0.9) Prepared by a Co-Precipitation MethodSynthesis of High Brightness Red Long Persistent Phosphor (Sr 1-X Ca X)S: Eu, Dy by Sol-Gel Thermolysis MethodAn Oxide-Diluted Magnetic Semiconductor: Co-Doped ZnOFirst-Principles Calculation of Electronic Structure of the Cu?Doped Pyrite FeS2Growth of ZnO Films on Si(111) by Metalorganic Chemical Vapor Deposition with AlN and Low-Temperature ZnO Double BuffersHydrothermal Synthesis and Photoluminescence Properties of Ca(MoO4)x(WO4)(1-X) MicrocrystallinesMeasurement Error of the Coercivity Hcj of NdFeB Permanent Magnet Caused by Air GapNumerical Simulation of the High Gain and Low Breakdown Voltage InGaAs/InP Avalanche PhotodiodeOptical Properties and Defect Study of Ca2+ Co-Doping Lu2Si2O7:Ce3+ Single Crystal ScintillatorPreparation and Research on Luminescent Properties of Eu-Doped TiO2-ZnO Composite PowdersPreparation of CsI(Tl) Scintillation Film by RF Magnetron Sputter Method and its Structural and Optical CharacterizationStudy on Y3Al5O12:Eu3+ Phosphor Coated by Bi2O3Exposure Schedule for Uniform Diffraction Efficiency of Partially-Overlapping Multiple Holograms in Dual Monomers PhotopolymersFabrication of Silicon Nanowires by Electroless Etching for Thermoelectric ApplicationThe Growth and Optical Properties of CdS Nanorods via Solvent-Thermal RouteCharacteristics of Silicon Nanowire Field Electron EmissionThe Study of Au/TiO2/Au Resistive Switching Memory with Crosspoint StructureNovel Preparation Method and Luminescent Properties of Eu3+ Doped CdWO4 NanorodCombustion Synthesis of Nanocrystalline Y2O2S: Eu 3+, Mg 2+, Ti 4+ Red Long-Lasting Phosphors Using Mixture Fuel of Thiourea and Citric AcidStudy on Bilayer-Type ZTO Thin Films Prepared by MOCVDA Novel Demultiplexing Photodetector with Integrated Vertical Conical StructurePreparation and Properties of ZnO@ZnS Nano-Array Core-Shell Structure with Different Concentration of TAASynthesis of Diaryl Pyrrolones Derivatives as Combretastatin A-4Mechanochemical Assisted Synthesis of Titanium Silicalite-1Preparation of Controlled Release Urea and its Release CharacteristicsThe Effect of Density on Polyesterification Kinetics of Neopentyi Glycol/Maleic Anhydride SystemAn Investigation on Properties of Sn-SBA-16 Synthesized without Mineral Acid AddedCatalytic Dehydrogenation Reaction Activity of Cyclohexanol over Cu2O/Mg(OH)2 CatalystsDevelopment Toxicity and Degradation of Diethyl PhthalatePhosphotungstic Acid, Silicotungstic Acid and Silicon Tungsten-Cobalt Heteropoly Acid with Bovine Serum Albumin InteractionStudy on Compound Corrosion Inhibitor of Aluminum in Salt SystemThe Parameters of Preparing Polyaniline Doped by Hydrochloric AcidA Novel Formula of Diverting Acid System and ApplicationPreparation of Hollow Microsphere and its Application in Paper CoatingPreparation of Low-Sulfur Expanded Graphite with Different Size ParticlesComparative Study on Compositions of Oil-Water Transition Layer before and after ClO2-Treatment ProcessOptimal Design for ASP of Mixed Surfactants with RhamnoilpidThermal Degradation Study of Lithium and Potassium Iodide/Epoxidized Natural Rubber Polymer ElectrolytesSynthesis and Evaluation of a New Type of Cationic Gemini SurfactantCharacterization and Synthesis of a Betaxolol Hydrochloride IntermediateCu(OH)2/N-TiO2 Compound Heterojunction Photcocatalyst: Preparation, Characterization and Photocatalytic PropertiesPreparation of Three-Dimensionally Interconnected Meso/Mesoporous Ho3+ Doped TiO2 Nanoparticles with Enhanced Photocatalytic ActivityResearch on the Influence of PEG to the Nuclei Population Density of Copper ElectrocrystallizationPreparation of La2(WO4)3 by Two Step Method and CharacterizationThe Synthesis and Characterization of Zinc Borate Zn2B6O11?7H2OSynthesis and Characterization of Bridged Amine-Functionalized Mesoporous Organosilica MaterialsA Density Functional Study of PdCn(n= 2-12) ClustersOptimization of Membrane Electrode Assemblies Anode of a Micro Direct Methanol Fuel Cell by Mathematical ModelingLiMn2O4 Prepared by Liquid Phase Flameless Combustion with F-Doped for Lithium-Ion Battery Cathode MaterialsCombustion Kinetics Characteristics of Dry Distillation Coal TarExperimental Research on Producing Shale Oil through Thermal Cracking of Small-Particle Oil ShaleStructures of Li1+xMn2-XO4 Synthesized by Different MethodsEffect of Cr Doping on Electrochemical Performance of LiMn2O4Electrochemical Behaviors of Different Gradesof Pure Aluminum in Alkaline SolutionEffects of Polyethylene Glycol on Agarose-Based Magnetic Polymer Electrolyte for Dye-Sensitized Solar CellStructure and Electrochemical Performances of LiFePO4/C Composite Cathode Coating with Different Carbon Sources for Lithium Ion BatteriesStudy on Low-Temperature Oxidation Process of Low Rank Coal by In Situ FTIRSynthesis and Performances of a Fe-Site Doped Lithium Iron PhosphateSynthesis of (Ba,Ti)-Doped Apatite-Type Lanthanum Silicate Nano-Sized Powders via Microwave-Assisted Sol-Gel Auto-Combustion RouteSheet-Shape Specimen Creep Behavior and Microstructure Analysis of Ni-Based Alloy C276 at High TemperatureSynthesis, Characterization and Electrochemical Properties of Li1+xMn2O4 Spinels Prepared by Solution Combustion SynthesisResearch Progresses of Two Kinds of Novel Electrolyte Lithium Salts: Lithium Bis(oxalato) Borate and Lithium OxalyldifluroborateSurface Passivation of Silicon Wafers by Iodine-Ethanol (I-E) for Minority Carrier Lifetime MeasurementsAlloy Design and Microstructure Control for the Production of Heavy Ductile Irons Used in Large-Scale WindmillsCorrosion Behavior of Low-Alloy Steel in COT Upper Deck O2-CO2-SO2-H2S Moisture EnvironmentEffect of Different Strain on Microstructure Evolution of Medium Carbon SteelEffect of Phosphorus Contents on Texture and Grain Boundary Character for the Annealing High Strength Ti-IF SteelsInfluence of Rare Earth on Microstructure of 20MnCrNi2Mo Wear-Resistant Cast SteelOxidation Behavior of a TP304H Stainless Steel in the High Temperature and High Pressure Water VaporStudy on Metal Thermal Reduction of Caustic Calcined Dolomite Based Compound DesulfurizerContinuous Cooling Transformation of Overcooling Austenite and Structure Evolution of Si SteelThe Evolution of M/A in Ultra-Low Carbon Bainite SteelSulfides Precipitation during Transformation of a High Sulfur Alloy SteelApplication of Frumkin Isotherm for Carbon Steel Corrosion in Soil MediaTransformation Behavior of Austenite Continuous Cooling of Nb-Ti Micro-Alloyed Low Carbon SteelEffect of Ultrasonic Inoculation Treatment on Distribution of Sulphur in Fe-S AlloyThe Microstructure and Elements Distribution of High-Chiromium Hypereatectoid Steel by High-Temperature HomogenizationStudy of V2O5 Direct Alloying ReductantsProcess Design Strategies for Producing Heavy Section Steel with Improved QualityDevelopment of Domestic Prehardened Plastic Mould SteelStudy on Antibacterial Properties of SUSXM7 Cu- Bearing Austenitic Stainless SteelThe Evolution of Deuterium Bubbles in Iron under Electron IrradiationEffect of Temperature on Structure of Outer Fe Oxide Layer of Fe-2.2Si AlloyEffects of Alloy Composition and Annealing Treatment on the Performance of Aluminum ConductorEffects of Ce, Mn, Cr on the Microstructure and Properties of High-Iron Eutectic Al-Si Piston AlloyEffects of Si, Cu and Mg on the High-Temperature Mechanical Properties of Al-Si-Cu-Mg AlloyEffects of the Aging Time and Temperature on the Microstructures and Mechanical Properties of 6082 Aluminum Alloy ExtrusionsInfluence and Theory Analysis of Ti, Zr, B on the Refining Effect of Aluminum AlloyEffect of Heat Treatment on Microstructure and Mechanical Properties of A390 AlloyEffects of High Co Contents in Fe-Cr-Mo-C-B-Y Alloy on the Glass Forming and the Mechanical PropertiesInfluence of Gd Content on the Microstructure and Mechanical Properties of Zn-Al-Mg-Si AlloyTensile Properties of a Cast TiAl Alloy with Directional Lamellar MicrostructuresThe Divacancy Formation Energy for B2 FeAl Alloy Simulated with Finnis-Sinclair many-Body Interatomic PotentialAn Investigation on Grain Refinement Mechanism of Master Alloys Al-Ti, Al-TiC and Al-Ti-C Toward Pure AluminumEffect of Heat Treatment on Microstructure and Properties of Ti-6.5Al-1.5Mo-2.5V-2Zr Titanium AlloyEffect of Si Content on Deformation Behavior of DC Cast Al-Si AlloysMicrostructure and Mechanical Property of the Directionally Solidified NiAl-Cr(Mo)-Hf/Ho AlloyResearch on Corrosion Rate Prediction of Aluminum Alloys in Typical Domestic Areas Based on BP Artificial Neural NetworkThe Precipitation Behavior of ?' Phase in Superalloy FGH96 during Continuous Solution Cooling Conditions
In Situ Study of Stress-Induced Martensitic Transformation in Ni47Ti44Nb9 Shape-Memory AlloysInvestigation of Porous NiAl Intermetallics Prepared by Self-Propagating High-Temperature SynthesisMicrostructure and Growth Behavior of the Intermetallic Compound for Sn-1.0Ag-0.5Cu-NiB/Cu Solder Joint InterfaceEutectoid Transformation in Zn Alloy with High Al ContentHigh Temperature Oxidation Behaviour of AlCuTiFeNiCr High-Entropy AlloyMicrostructure Evolution of Al-Ti-C Alloy Wires during Remelting ProcessThe Effect of Aging on the Corrosion Property of Al-7Si-0.3MgPrecipitation Kinetics and Behavior of d Phase in Inconel 718 AlloyResearch on Multiple Plastic Deformations of Ultra-High Strength Aluminium AlloyPrediction of Electrical Conductivity of Cu-15Ni-8Sn-XSi Alloys Using the Physical Model and Artificial Intelligence ModelPreparation and Corrosion Resistance of Cu-Based Bulk Glassy AlloysThe Inhibiting Effect of Monoethanolamine on 6063 Aluminum Alloy in Sodium Chloride SolutionEfficiency in the Extraction of Pure Silicon from Al-Si Alloy Melts by a Combined Process of Solvent Refining and Centrifugation for Solar Silicon FeedstockResearch on Material Erosion Mechanisms of High Si-Al Alloy by Micro-EDMManufacture, Structure and Properties of Copper FoamsExperimental Measurements of the Selected Properties of AeroThermInfluence Research on the Pretreatment of Recycled Coarse Aggregate to the Strength of Recycled ConcreteResearch on Reinforced Concrete Column under High Speed Impact of Different Diameter ProjectileThe Influence of Combined Admixture of Super-Fine Limestone Powder and Low-Quality Fly Ash on the Performance of Cement MortarThe Temperature Distribution Research of Foaming Gypsum Mold in the Fabrication and Pouring ProcessUtilizing the Waste Polystyrene to Enhance the Thermal Insulation of the Local BuildingsAnalytical Model of Capillary Suction Velocity of a Pipe with Multiple SizesResearch on Porous Properties of Air-Entrained Lightweight Aggregate ConcreteStudy on BFRP Constrained Preloaded Concrete Square-Shaped ColumnStudy on Indoor Detecting Methods and Performance of ShotcreteDesign a Thermosetting Asphalt Mixture for Surfacing on Orthotropic Steel Deck BridgeInfluence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of ShotcreteResearch on Preparation Technology of Exposed-Aggregate Cement Concrete PavementSynergistic Effects and Cracking Bending Strength for Steel-Polypropylene Hybrid Fiber Reinforced ConcreteUse of Sugarcane Bagasse Ash as Raw Material in Production of Autoclaved Lightweight ConcreteThe Influences on Cement Clinker by Disposing Glyphosate Waste Mother-Liquor with Rotary KilnResearch Status on Fatigue Behavior of Reinforced Concrete Beams Strengthened with Fiber Reinforced PolymersTricalcium Silicate (C3S) Properties in Different Physical and Chemical EnvironmentVibrating Mixing and the Improvement of Concrete PerformanceAsphalt Material Aging Mechanism and Characteristics Analysis Based on Infrared SpectrumThe Experiment Research of a New Cementing Material Applied in Iron Tailing FillingArtificial and Natural Weathering of Chlorinated Polyvinyl Chloride (CPVC)Effect of Moisture Content on Thermal Physical Properties and Heat Transfer of Plywood during Hot-PressingFailure Analysis of A7N01S-T5 Aluminum Alloy Buffer Beam for High-Speed TrainReview on Surface Failure Mode of Metallic Materials in Very High Cycle Fatigue RegimeThe Effect of UIT on the Residual Stress of 7N01 Al-Alloy Welding JointsAnalysis of Indentation Size Effect of Vickers Hardness Tests of SteelsExperiment Study and Numerical Simulation of CFRP Sandwich Structure on Aircraft Ditching ModelStudy on Cracking of Anchor Structure due to Reinforcement CorrosionStudy on the Electrometric Method to Measure the Young?s Modulus of Metal MaterialsConcrete Thermal Stress of Arch Dam in Construction Period of Stability against Sliding of Steep Slope SectionFailure Analysis on Natural Gas Transmitting Pipe Based on the Data of Intelligent InspectionIntegrity Assessment on Natural Gas Transmitting Pipe Based on the Finite Element AnalysisTesting and Evaluation of Comfort Performances of Mongolian Clothing FabricsUltrasonic Nondestructive Evaluation of Composite Components Using Advanced Total Focusing MethodDamage Calculation and Fatigue Life Prediction for Freight Car BodyReliability Analysis of Wear Casing Internal Pressure StrengthResearch on Structural Fatigue Damage Based on the Superimposed Load Spectrum MethodStress Analysis of Perforated Plate Based on ANSYSInfluence of Point Defects on Band Gaps of Fe-Epoxy in Two-Dimensional Phononic CrystalTransmission Properties in 2D Phononic Crystal Thin Plate with Linear DefectResearch on CSP Work Roll Defect Causes and Improvement MeasureA Fretting Damage Analysis of Railway AxleDry Sliding Friction and Wear Behavior of Surface Hardened Ferrous PM Cam Materials for Automobile ApplicationsFailure Analysis on Strain Clamp on 220kV Transmission LineEffect of Carbon Doped in BN on Electronic Structures and Mechanical PropertiesSimulation and Analysis of the Wheat Stem LodgingStudy on Impedance Calculation of Viscoelastic Material in Acoustic TubeStudy on Tribological Behaviors of FeS Solid Lubrication Duplex Layer under n-Fe3O4 Additive LubricatingCrevice Corrosion Behaviors of X52 Carbon Steel in Chloride Containing SolutionsA Research on the Stress Dispersion Property of the Warp Knitted Space FabricThe Qualitative Analysis of Far-Infrared Fiber by Near-Infrared SpectroscopyDetermination of Boric Anhydride in Ascharite Ores by Inductively Coupled Plasma Atomic Emission SpectrometrySurface Activity Research of Cationic Gemini Surfactants3D Generalized Beam (GB) Lattice Model for Analysis of the Failure of ConcreteDynamic Stress and Deformation of Non-Homogeneous Poroelastic Moderately Thick Shells of Revolution Saturated in Viscous FluidHigh-Temperature Deformation Characteristics of a SA516GR70 Vessel SteelAn Optimized Design Method for Thickness of Shells with Multi-Holes Based on Finite Element Method TheoryNumerical Analysis of a New Test Method for Evaluating the Mechanics Characteristics of Steel Deck PavementA New Stress Mathematical Model of Deformation Zone while Straightening Thin-Walled TubeSegmented Optimization Design of Aluminum Alloy Goal Crossbar Based on FEMFlexural Behavior Characteristics of UHPC According to Twisted Steel FiberFatigue Life Prediction of Welded Case Shell on Aeroengine under Combined Internal Pressure and Axial LoadsStudy on Bearing Behaviors of Bolted Joints in Composite LaminatesAnalysis of Structural Parameters for Unbonded Flexible PipesDesign and Cut Skills in Accordance with the Physical Properties of the Gem StonesA New Comprehensive Utilization Method for Coal Gangue: Preparing Alite-Sulphoaluminate CementCatalytic Hydrolysis of CCl2F2 over Solid Base CaO/ZrO2Dissolution and Regeneration of Reed Leaf Fibers in Imidazole-Based Ionic LiquidsEffects of Molybdenum Doping on Optical Properties of Sm0.3Ce0.7O1.85Effects of Nano Particle Hydroxyapatite on Cadmium Bioaccumulation and Translocation in Pakchoi (Brassia chinensis) from Cadmium Polluted SoilExperimental Study of Thermal Plasma Processing Waste Circuit BoardsPreparation and Characterization of Alginate/Polyvinyl Alcohol Composite Fibers Containing Copper IonsStudy of Reed Leaf Fibers? Degumming in High Temperature and PressureTreatment of Cationic Dye Wastewater with Hybrid Sorbent Generated by Anionic Dye Wastewater Hybridization with Calcium FluoridePhotoelectrocatalytic Degradation of HCB by N-Doped TiO2 Nanotube ArraysQSAR Study of the Adsorption Mechanism of Ascorbic Acid towards Iron in Alkaline MediaStudy on the Performance of Orange Oil CleanserThe Preparation and Characterization of Starch Oxidized by Nitric Acid and its Properties of Calcium Complexing CapacityRemoval Chromium and Turbidity Using Starch Derivative Flocculant CSAXSynthesis and Paclobutrazol Visible-Light Degradation of Al/S Doped TiO2 Mesoporous Materials with Pyridine as a TemplateUse of Rice Husk Ash to Treat Simulated Agricultural Cultivation WastewaterEffects of Recycling Ladle Lining Materials on Phase Composition and Microstructure of Al2O3-SiC-C Castable for Iron RunnerEffects of Recycling Ladle Lining Materials on Sintering Performance of Al2O3-SiC-C Castable for Iron RunnerTreatment of Chlorobenzene Containing Wastewater by Titanium Oxide PhotocatalystEvaluation of the Leaching Behavior of Hexavalent Chromium from Malaysian Electric Arc Furnace Steel SlagSimultaneous Nitrification and Denitrification in Biofilm-Electrode ReactorA Preliminary Investigation on the Preparation of Bagasse Fly Ash as Clarifying Aid for Clarification of Cane JuiceAssessment of Degree of Maturity of Compost Produced by Different Kitchen Waste Composting MethodsStudy on Spectrophotometric Determining Trace Tetracycline by Phase-Separation FloatationExperimental Study on Cr6+ Adsorption in Water about CorncobSpatial Distribution in Forest Soil Nutrients and its Relationship with Ecological Factors on the up Stream of Taihu Lake BasinStudy of Thermal Degradation of PolymersSeasonal Soil Freezing Characters in DaxinganlingExperiment and Analysis on Temperature Distribution of Straw Double-Grate Briquette Boiler Furnace-TankHeteropolyacid Photocatalytical Degradation of Atrazine in Aqueous Solution under UV-IrradiationInvestigation on the Electrochemical Behaviors of Phenol Oxidation on GCE (Glassy Carbon Electrode)Study on Preparation of Iron-Based Flocculant by Hydrogen Peroxide Oxidation ProcessResearch on Cavitation and Impinging Stream Microelectrolysis Reactor for Treating Organic WastewaterThe Influence of Rainwater Reuse on Urban Water Circulation and Downstream Eco-EnvironmentThe Evaluation of Photocatalytic Properties of Iron Doped Titania Photocatalyst by Degradation of Methylene Blue Using Fluorescent Light SourceResearch on Characterization and Application of High-Performance Ion Exchange MaterialAn Evaluation Method of Water Resources Carrying Capacity Based on Projection Pursuit ModelResearch of the New Composite Solid Lubricant CoatingImproving Anti-Aging Coatings by Coupling of Organic and Inorganic Ultraviolet AbsorbersDielectric and Tunable Properties of Lead Barium Strontium Titanate Thin Films Fabricated by Radio Frequency Magnetron Sputtering MethodStudy on Corrosion Wear Behavior of 70 Aluminum Alloy Anodic Oxide CoatingEffect of Hydrogen Dilution on Properties of Microcrystalline Silicon Thin Films Prepared by VHF-PECVDQuantum Size Effects of Chemical Bath Deposited ZnSe Thin FilmsW-Doped Vanadium Oxide Thin Films Prepared by Reactive Magnetron SputteringEffects of Cu Addition on Microstructure and Adhesion Properties of Ti-Al-N Nanocomposite Films Deposited by Magnetron SputteringInfluence of Rare Earth on the Peeling Properties of Ultra-Thin Copper Foil with CarrierMechanical Instability of Wedge-Shaped Cr Films Quenched by Silicone Oil during DepositionSolution-Based Metal Induced Crystallization of Amorphous Silicon FilmsDependence of the Coating Carbon Layer Configuration of Cordierite Monolith on Coating Reaction Conditions in Methane DecompositionInvestigation of Corrosion Resistant of Al-Zn-Si-Re-Mg CoatingMicrostructure and Wear Properties of TiC/Fe-Based Composite Coating Prepared by PTA Weld-Surfacing ProcessMicrostructures and Wear Resistance of Si-Al-Y Co-Deposition Coatings on ?-TiAl AlloyStudy on Surface Modification of Aluminum Alloys by Silicate-Based Hybrid CoatingThe Investigation of Abrasive Jet Polishing on the Linear Micro-Channels Surface of SKD61 Mold SteelThe Property Comparison of Coating Prepared by Oxygen-Acetylene Spray Welding Technology and High-Frequency Induction Remelting TechnologyComparative Study of the Cyclic Oxidation Resistance of NiCrAlY and NiCoCrAlY CoatingsThe High Temperature Oxidation Resistance and Anti-Oxidation Mechanism of Plasma-Sprayed NiCrAlY Coatings on Stainless StellA Porous TiO2 Coating with Vermiform Morphology Formed on Ti through Micro-Arc OxidationEffect of Atmosphere Composition on Lifetime and Oxidation Behavior of EB-PVD TBC with NiPtAl BondcoatsEffect of Thermal Cycling on Lifetime and Failure Mechanism of EB-PVD TBC with NiCoCrAlYZr BondcoatsEffects of Conductive Pigments on the Anti-Corrosion Properties of Zinc-Rich CoatingsElectrodepositing Ir Film at Constant Current in NaCl-KCl Molten SaltsEvolution of Microstructure and Properties of a Disk Cutter Ring Material during Carburization and Heat TreatmentExperimental Investigation on Anti-Fatigue Function of Gear Surface with Grid Micro-MorphologyHydrothermal Synthesis of Lead Titanate Epitaxial Film for Non-Volatile Memory Device ApplicationSynthesis and Surface Properties of SiO2 Modified Fluorosilicone Acrylic Copolymer HybridsInterfacial Failureof SiN/GaAs Film/Substrate BilayersInduced by NanoscratchNi-P-Diamond Composite Coating on Friction ShimsMicrostructure Characteristic of Laser Cladding Ceramic Layer on High Cr Cast Steel SurfacePreparation of Superhydrophobic Coating from Fluorine-Containing Acrylate Polymer and Polysiloxane with Nano-SiO2Electrochemical Corrosion Behavior of Corrosion-Resistant Steel for Cargo Oil TankEffects of Friction Load and Ultrasonic Vibration on the Tribological Properties of Al2O3/Al2O3 Ceramic Friction Pairs under Liquid Paraffin LubricationResearch on the Microstructure and Performance of Co-Based Alloy Surfacing LayerFabrication of YBa2Cu3O7-d Superconducting Film on NiW Alloy Using Electrophoretic DepositionEffect of Laser Cladding Al3Ti-Based Coatings on the Wear and Corrosion Resistances of AA6063 Aluminum AlloyApplication of WS2 in Solid Lubricant Coating for MetalElectroless Ni-P Plating on Mg-7Al Alloy by Chemical Conversion PretreatmentSynthesis and Characterization of New Mesoporous Silica Film Materials for Explosive DetectionMolecular Dynamics Simulation of the Influence Factors of Particle Depositing on Surface during Cold SpraySimulation of Microstructure Evolution on Copper, Aluminum and Alloy during ECAPComparative Study on Compression Deformation Behaviors of Cast and Extruded AZ31 AlloysDynamic Strain Aging during Tensile Deformation of Extruded AZ81 Magnesium AlloyDie Wear Analysis of Spur-Gear Shaft Hot Extrusion ProcessForging Effect of Horizontal V - Shaped Anvil for Heavy Axial ForgingsInfluence of Temperature Difference on Front End Bending in Hot Slab RollingDevelopment of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy TubeFEM Analysis of Glass Lens Molding PressResearch on Finite Element Simulation and Test of Two-Pass Deep Drawing Forming for Conical PartsA Study on Initial Blank Design to Minimize Earing in Multi-Stage Deep Drawing Process for Rectangular Cup Using High Strength Steel MaterialDeformation Behavior of AZ31 Magnesium Alloy at Elevated TemperatureDevelopment of Radial-Axial Ring Rolling Experimental Equipment and Calculation of Ring Rolling ForcesExtrusion of Powder/Solid Clad Rods for a Desirable Hole Ratio in Powder RegionHeat Spinning Deformation Technology of 7A04 Loading-WheelStatistical Study on Correlation between Design Variables and Shape Errors in Flexible Stretch Forming ProcessStudy on the Slab Design of Medium Plate Hot RollingSurface Roughness Analysis of Metal Spun PartsThe Design and Simulation of Circuit for Electromagnetic Force Assisted Line Heating DeviceNumerical Simulation of Large-Sized Pure Aluminum Rod under Multi-Pass ECAPImpact Analysis of Microstructure Evolution in Hot Rolling of H-BeamsOptimization of Pre-Forging of the Aircraft Wheel Hub by FEMAnalysis of Linear Defects of Cold-Rolled Galvanized SheetStudy on Developing Q345XJ by UFC in the CSPThe Mathematic Model of Deformation Resistance of S50C Medium Carbon Steel in Hot Rolling ProcessSimulation of Die Gap Variation in Temperature Field Distribution of High Strength Steel Hot Stamping ProcessSimulation and Optimization of Die Forging Process for High Pressure Valve BonnetWork Roll Temperature Prediction Model in Hot Strip Mill Based on Two Dimensional Alternating Difference MethodAnalysis of Effect of Process Parameters on Warpage of a Automobile Bumper Injection Molded PartsThe Numerical Model of Axial Force for 4-High MillResearch on Deformation of TC4 with Complex Profile in Hot RollingA Novel Three-Dimensional Direct Controlled Cell Assembling SystemThe Hot Pressing Process Optimization of Ti(C, N) Matrix Nano-Composite Ceramic Die Materials with the Back Propagation Neural Network and Immune Genetic AlgorithmA New Method for Quantitatively Evaluating Defects of the Green Body in Injection Moulding Based on X-Ray Digital RadiographyModeling Powder Extrusion Pastes for Forming 410L Stainless Metallic HoneycombsResearch on the Cutting Characteristics of Coated Tools on End Milling Nickel-Based Superalloy Mar-M247The Identified Principle of Machining Conditions and its Application in NC MachiningThe Theoretical Analysis and Application of the Ultra-Precision Machining the End Surface of Stop Valve?s Valve Flap with the Diamond Facing ToolA Dynamic Observation Concept to Keep Water-Soluble Coolant in Normal Condition for Long TimeA Visualization Study of Abrasive Flow Variation in Abrasive Air JetsDry Machining of T6061 Aluminium Alloy Using Titanium Carbonitride (TiCN) Coated ToolsEffects of Mixing Chamber Shape on Cutting Performance in Abrasive Water JetEvaluation Influences of Residual Stress on Machining Aluminum Part of Cooling PlatesExperiment Studies of Nd:YAG Laser Assisted Dressing Technique for Metal-Bonded CBN Grinding Wheel by Crankshaft GrindingInfluence of Tooth Errors and Truing Principles of Grinding Wheel Abrasion for Machining Arc Enveloping WormMicro-Channel Fabrication on Quartz Crystals by a Micro Abrasive Air JetMicrogrooving Using an Ultrafine Wire ToolStudy of the Wear of Drills in Dry Drilling of NM360 SteelsAnalysis of Plunge Milling Force and Tool Deformation on Cr12Determination of the Cutting Area Considering the Tool Slenderness Ratio for the Development of a 5-Axis Impeller Machining Automation CAM ModuleExperimental Research the Cutting Force of the 40Cr Circular Cone TurningInfluence of Dielectric Jet Flushing during Electro Discharge Diamond Surface Grinding ProcessModeling and Experimental Study on Cutting Force of Diamond Circular Saw in Cutting Granite Using Response Surface MethodologyStudy on Arithmetic of Surface Damage Ratio in High Speed Machining of Graphite Based on Matlab Image ProcessingWear Mechanism of PVD TiAlN Coated Cemented Carbide Tool in Dry Turning Titanium Alloy TC4Research on Grinding Temperature of a New Diamond Grinding WheelStudy on Micro-Topography Characteristics of EDM SurfaceA Kind of Optimization Model on Turning Process Based on Productivity and CostRecent Development of Parameter Optimization for Metal Cutting and Grinding ProcessesResearch on Tool Wear Rate of Powder Mixed near Dry Electrical Discharge MachiningThe Study of Silica Sol with Great Particle Size for the SiO2 Dielectric CMPAnalysis of the Vibration Mechanism in the Turn-Milling Machining of Micro-Miniature ShaftsAtmospheric TIG Arc Diagnostics with a Low Disturbance Electrostatic ProbeCorrosion Resistance Prediction of Laser Tailor-Welded Blank Based on Partial Least SquareDistribution of Magnetic Flux Density and Magnetic Force in EMRFEA Simulation of Clinching Process Based on GTN Damage ModelInfluence of 0 Degree to the Shoulder of the Friction Stir Welding on AA 6063 and AA 7075Measurement of the Surface Tension of Liquid Metal-Droplet in Arc WeldingPrediction and Control of Weld Width of Deep Drawing Steel Laser Tailored BlanksResearch on Repair Welding Processes of a Bainite Steel FrogResearch on the Usability of the Defective Grid StructureEffect of Current Waveform on Droplet Oscillation in GMAWEffect of the Wire Temperature on the Weld Formation in GMAWEffect of TiH2 Composition on Porous Stainless Steel and Titanium Hydride Composite Synthesized by Spark Plasma SinteringPrediction Model of Droplet Size in Low-Current GMAWPrediction of Welding Deformations of CRH380 Aluminum Alloy Side-Wall with Equivalent Thermal Load Method Based on Inherent StrainThe Compulsively Short Circuiting Transfer Phenomenon Study in Rotational Arc MAG WeldingA Study of Material Flow Behavior in Thickness Direction in Friction Stir Welding of 7075 Alloy PlateDissimilar Friction Stir Spot Welding without Key Hole between AZ31B Magnesium Alloy and 5052 Aluminum AlloyOptimization of Parameters and Research on Joint Microstructure of Resistance Spot Welding for 316 Stainless SteelCharacteristics Evaluation of Weld Metal Zone Welded with Various Repair Welding Filler MetalsEvaluation of Effect of Welding Methods to Corrosion and Hardness Characteristics of Welded ZoneResearch on Three Microcosmic Interface Defects of Titanium/Steel Laminates Manufactured by Explosive WeldingSimulation Research on Relieving Welding Residual Stress by Vibratory Stress Relief TechnologyEffect of Welding Parameters on Temperature Field during Twin-Wire Submerged Arc Welding of X80 Pipeline SteelPrediction of Weld Parameters in Gas Metal Arc Welding Process Using Curve Arc Fitting Techniques and Graphical MethodsExperimental Investigation on Femtosecond Laser Ablation of PolycarbonateExperimental Study of Low-Pressure Water Jet Assisted Laser Processing of Al2O3 CeramicThe Optimization Study about Technological Parameters of YAG Laser Precision Cutting Stainless SheetUltrafast Laser Machine Based on All-Fiber Femtosecond Laser SystemCharacterization of TC17 Titanium Alloy Treated by Square-Spot Laser Shock PeeningLaser Processing Speed vs Morphology of Glazing CeramicsExperimental Research on Flight Trajectory of Edge Electron of the Electron-Beam in the Electron Gun of FurnaceStudy of Displacement Value of the Electron-Beam in the Electron Gun in Electron-Beam FurnaceMicrostructures and Properties of Twin-Roll Casting 7050 Aluminum Alloy StripEffect of Casting Design to Microstructure and Mechanical Properties of 2 Mm Twdi PlateEffect of DC Casting Processes on Microstructure of AlCu4.5Mn0.8 AlloyGrain Refinement of 6061 Alloy by Low-Voltage Pulsed Magnetic Field TreatmentEffect of Annular Electromagnetic Stirring Process on Solidification Microstructure of 7075 Aluminium AlloyEffect of Magnetostatic Field on Microstructure of 7075 Aluminum Alloy Strip Manufactured by Twin-Roll CastingInfluence of Different Roll Casting Conditions on Casting MicrostructureSimulation of Bridgman Directional Solidification Microstructure Using Phase Field MethodApplication of the Dynamic Soft-Reduction Technology on the No.4 Slab Continuous Caster of Bayi SteelEffects of Argon Partial Pressure on Interfacial Shape of Porous Copper under Unidirectional SolidificationNumerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round BloomThe Study on Microstructures and Properties of the Direct Squeeze Casting Al-Zn-Mg-Cu-Zr-Sc AlloyDie Casting Mold Design of Auto Oil Pump BracketAnalysis of Elemental Segregation in a Microalloyed Cast SteelMineral Processing Experiment of Copper Mineral in Yunnan ProvinceMineral Processing Experiment of Quartz from Gold Ore TailingAnalysis of Tight Gas Reservoir Forming Condition in Gulong-Changjiaweizi Region, Northern Songliao BasinShale Gas Seepage Mechanism and Pressure Dynamic Characteristics ResearchGeological Evaluation of Puzzle Reservoirs in Putaohua Reservoir of Weixing OilfieldHydrocarbon Accumulation Characteristics in Cretaceous System Hailaer BasinThe Analysis of Sedimentary Evolution Mode of Denglouku-Formation in Gulong Area of Songliao BasinThe Optimal Selecting Technique on Well Logging Items and its Application to Identify Complex Lithology ProfileSedimentary Characteristics in Zhalainuoer Group in Cano Depression Hailaer BasinStratigraphic Sequence Framework of Zao IV Group in Zaobei OilfieldPreparation of Ammonium Tungstophosphate-Calcium Alginate Composite Adsorbent and its Adsorption Properties of RubidiumPotential Indonesia Ores as Raw Material for Producing Iron NuggetFractal of Grain Distribution in Sintered Ore with Variable Brazil Iron OreStudy on the Effect on Sintering Mineralization of Iron OreThermodynamic Studies on Selective Oxidation of Nb, P and C in Dephosphorization of Low Niobium Hot MetalExperimental Study on Carbothermic Reduction of Magnesia with Different Carbon MaterialsThe Practice of Strengthening Pulverized Coal InjectionThe Investigation between Sedimentary Facies of Middle Cambrian and the Characters of Volcanic Rock, in Wenshan, Yunnan ProvinceAnalysis of Physical Structure and Chemical Composition of Oil-Water Transition Layer in Oil Gathering and Transportation SystemResourcing Utilization of High Alumina Fly AshExperimental Research of Fluorite Flotation SeparationComparison of Thermal Decomposition Kinetics of Magnesite and LimestoneExperimental Study on the Recovery of Apatite from Ore Tailings in Hebei
