Buch, Englisch, 830 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
Physical and Numerical Simulation of Materials Processing VII
Erscheinungsjahr 2013
ISBN: 978-3-03785-728-1
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS’13), June 16-19, 2013, Oulu, Finland
Buch, Englisch, 830 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
ISBN: 978-3-03785-728-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Plenary Lectures
Dynamic Transformation during Simulated Hot Rolling
Multiple, Simultaneous, Martensitic Transformations: Implications on Transformation Texture Intensities
Atomic Scale Investigation of Solutes and Precipitates in High Strength Steels
Numerical Simulation of Hot Rolling
Formation of an Ultrafine-Grained Austenite-Containing Microstructure from a Cold-Rolled Medium-Manganese Steel Processed Using Intercritical Annealing
The Thermomechanical Controlled Processing of High-Strength Steel Plate: A New View of Toughness Based on Modern Metallography
Physical Simulation of Materials Processing
Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels
Control of Microstructure by MaxStrain Device
Novel Physical Simulation Technique Development for Multistage Metal Plastic Deformation Processing
Physical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline Applications
Physical Simulation of Thermomechanical Processing of Multiphase Mn-Al Steels with Retained Austenite
Designing a Novel DQ&P Process through Physical Simulation Studies
Achieving High Tensile Properties in a C-Mn-Si Structural Steel by Simulating Hot Rolling and Heat Treatment Schedules
Phenomena in Steel Processing
The Development of Interphase Precipitated Nanometre-Sized Carbides in the Advanced Low-Alloy Steels
Effect of Heating Process on Retained Austenite of Mn-TRIP Steel
Crystallographic Features of Low-Carbon Bainite Formed under Non-Isothermal Conditions
Modeling of Microstructure and Mechanical Properties of Hot Rolled Steels
Modelling of Strain Rate and Temperature Dependent Flow Stresses of Supercooled Austenite for AISI 4140
Recrystallization Behavior of 0.11% Ti-Added Complex Phase Steel during Hot Compression
Characterization and Modeling of Softening Kinetics during Hot Deformation in Modern Steels
Softening Kinetics in High Al-Nb Microalloyed Steels
Study of the Effect of Thermomechanical Processing on Grain Refinement in HSLA Steels
Development of Nano-Scale Precipitation Strengthened Hot-Rolled 590MPa Grade Wheel Steel
Microstructure and Mechanical Properties of X80 Induction Heating Bends
Effect of Reheat Conditions on Microstructure Evolution and Precipitation Behavior in High Strength Linepipe Steel
Effect of Different Cooling Paths on the Microstructure and Properties of a Plain Carbon Steel
Microstructural Evolution during Tempering of 16Cr-5Ni Stainless Steel: Effects on Final Mechanical Properties
Young's Modulus Profile in Kolsterized AISI 316L Steel
Effect of Rare Earth Addition on Dynamic Recrystallization and Precipitation Behavior of a Niobium-Containing Microalloy Steel
Numerical Simulation of Materials Processing
Physical Modelling the Microstructure Formation in Advanced High-Strength Steels
Mathematical Modelling of Hot Rolling: A Practical Tool to Improve Rolling Schedules and Steel Properties
Numerical Simulation of Thermal Stress and Deformation in a Casting Using Finite Difference Method
Numerical Simulation of Casting Thermal Stress and Deformation Based on Finite Difference Method
Research and Development on CAD/CAE Integration of Casting Process System Based on IGES Neutral File
Advanced Methods in Modelling of Metallurgical Unit Operations
Effect of Interfacial Tension on the Emulsification of Slag - Considerations on the CFD Modelling of Dispersion
Three Phase CFD-Simulation of CAS-OB Ladle
Numerical Study on the Removal of Hydrogen and Nitrogen from the Melt of Medium Carbon Steel in Vacuum Tank Degasser
Soft Reduction of a Cast Ingot on the Incomplete Crystallization Stage
Introduction of Materials Modelling into Processing Simulation
Hybrid Modeling of Flat Rolling Process during Hot Rolling
Evolution of Strain in Multipass Hybrid Equal Channel Angular Pressing Using 3D Finite Element Analysis
Simulation of Thermomechanical Control Processing of Steels through the Use of Experimental Planning and FEM
Modelling of Grain Refinement Induced by SMAT Process, Using a Complete Numerical Chaining Methodology
Steel Property and Process Models for Quality Control and Optimization
A Fast Optimization Approach for Multi-Pass Wire Drawing Processes with a Penalty Fitness Function
Numerical Simulation of Temperature Field during Vacuum Sublimation Purification of Metal Tm
Die Stress Optimization Using Finite Element and Taguchi Method
Conditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation Codes
Influence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic Recrystallisation
Machining Profiling of the Working Rolls as a Way to Control Cross-Section of the Rolled Steel
Numerical Investigation on Void Nucleation around Inclusions under Combined Mechanical and Thermal Cycling Conditions
Challenges in Finite Element Simulations of Chain of Manufacturing Processes
Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process
Optimization of Local Laser Heat Treatment Process Using a Simple FE-Model
The Numerical Simulation Research of Thermal Mechanical Simulation Compression Behavior with Uneven Temperature on End
Processing and Properties of Light Metals
Effect of Constrained Conditions on the Equivalent Strain and Microstructure of 5052 Al Alloy Deformed by Groove Pressing
Hot Simulation Compression of In Situ TiBw/Ti6Al4V Composites with Novel Network Microstructure
Numerical Simulation of Bubble Migration in Liquid Titanium Melts under Hypergravity Field
Tensile Testing of Ti-6Al-4V Alloy Superplasticity
Processing and Properties of High-Mn and Stainless Steels
Physical Modelling of the Interaction between Softening and Nb (C,N) Strain-Induced Precipitation in High-Mn Steels
Precipitation Processes in High-Manganese Steels
Study on Cyclic Strain Localization and Fatigue Fracture Mechanism in High Manganese Twinning-Induced Plasticity Steels
Effects of Heat Treatment Process on Microstructure and Mechanical Properties of 31Mn2SiREB Cast Steel
Studies on Martensite Transformation in a Metastable Austenitic Cr-Mn Stainless Steel
Modelling Tensile Curves of AISI 316L at High Temperatures Starting from Strain Hardening Analysis
Processing of Advanced Materials
The Effect of Bonding Flaws on the Splitting Process in the Smart-Cut Technology
Modeling of Steels and Steel Surfaces Using Quantum Mechanical First Principles Methods
Materials for Electronics by Thermal Spraying
Al/Al2O3 Nanocomposite Produced by ECAP
Simulation Study on the Influence of H2 on the Carbon Deposition in ICVI of Thick-Walled Perform
First-Principles Study on Mn-Doped TiFeSb Half-Heusler Thermoelectric Materials
Welding of Aluminum Matrix Composites
Phase Transitions and Microstructural Processes in Shape Memory Alloys
Semi-Massive Nanocrystallised Composites: From the Process to Mechanical and Microstructural Investigations
Surface Patterning of Stainless Steel in Prevention of Fouling in Heat Transfer Equipment
Tuning the Composition and Microstructure of Fe-Based Alloy Thick Coatings for Heavy Duty Applications
Microstructure and Strength of Si3N4 Joints Bonded with Sialon-Oxynitride Glass
The Effects of Phosphotungstic Heteropoly Acid on Degradation Behaviour of Hardened Epoxide Polymers in Near-Critical Water
Simulation of the Hot Extrusion Process of Sintered WCu40 Covered with a Steel Cup
Microstructure and Reaction Mechanism of Multi-Laminated Ti-(SiCp/Al) Composites Subjected to Annealing at 1300°C
Simulation and Modeling of Welding
On the Modelling of a Pulsed TIG Weld Process in a Nickel Superalloy
A Process Model for Electron Beam Welding with Variable Thickness
Physical and Numerical Simulation of the Heat-Affected Zone of Multi-Pass Welds
Physical Simulation of Weldability of Weldox 1300 Steel
Physical Simulation on Microstructure and Properties for Weld HAZ of X100 Pipeline Steel
The Effect of Stabilizers on the Grain Growth and Impact Toughness of 21%Cr Ferritic Stainless Steels High-Temperature Heat-Affected Zones
Thermodynamic Modeling of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser Beam
Verification of a Thermodynamic Model of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser Beam
Numerical Simulation of SAW Heat Source in the External Longitudinal Magnetic Field in 16Mn Steel
Physical and Numerical Simulations of the Microstructure Evolution in AA6082 during Friction Stir Processing by Means of Hot Torsion and FEM
Development of Predicted Stress and Strain during Conventional and after Mitigation of Welded Aluminium-Manganese Alloy
Effect of Sn Content on the Microstructure, Mechanical and Electrical Properties of Ti2AlC/Cu Joints Brazed with Cu-Sn-Ti Filler Alloy
Characterizing the Decomposition of Ti2AlC during its Brazing with Cu by Using Ag-Cu Filler Alloy
Advanced Processing Methods
Flow Characteristics of Vacuum Assisted Resin Transfer Molding Process Depending on the Capillary Phenomenon
Effect of Friction and Lubrication on Formability of AA5182 Alloy in Hydroforming of Square Cups
Numerical Simulation of Multiple-Step Incremental Roll-Bending Forming of a Large Metal Sheet to U-Shape
Optimization of Tilt-Casting of Aluminum Alloy Automobile Drain Pipes through Numerical Simulation
The Preparation and Curing Kinetics of Epoxy/PhS(4, 4'-dihydroxydiphe-nylsulfone)/aluminum tris (tetradecylacetoacetate) Latent Resin System
Detection Systems for Advanced Processing and Products
Scale Monitoring System Tested at Ruukki Metals Plate Mill in Raahe
The Possibility to Use Optical Emission Spectrometry for Identifying the Amount of Inclusions in Steels
Signal Processing Method (HT and HHT) of AE for Complex Fault Detection
Vibration Analysis of Ship Propulsion Shaft with the Stern Bearing Characteristics
Eigenvalue Analysis of Roots Type Vacuum Pump Using FE-Method
Evaluation of the Fatigue Life in Aluminum Alloy Welded Joint by Nonlinear Ultrasonic Testing
Fatigue Life Prediction of Stainless Steel Laser Lap Joints Based on Natural Frequency Changes
Posters
Supersonic Lance Mass Transfer Modelling
New Continuous Casting and Slab Tracking Simulators for Steel Industry
Experimental Validation of the Carbon Diffusion Model for Transformation of Ferritic-Pearlitic Microstructure into Austenite during Continuous Annealing of Dual Phase Steels
Effect of Hot Deformation Temperature on the Restoration Mechanisms and Texture in a High-Cr Ferritic Stainless Steel
Physical Simulation for Evaluating Heat-Affected Zone Toughness of High and Ultra-High Strength Steels
Simulation of Active Shielding Gas Impact on Heat Distribution in the Weld Zone
Hardness Profiles of Quenched Steel Heat Affected Zones