Sonstiges, Englisch, Band Volume 762, 830 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 762, 830 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-476-8
Verlag: Trans Tech Publications
There are continuous demands for high performance materials with enhanced properties. In the development of these materials and their processing methods, physical and numerical simulations have important roles to play. By using best current knowledge and modern facilities, these simulation techniques can enable the rapid and economic evaluation and prediction of high temperature processes and applications. The papers deal extensively with physical and numerical simulation, the modeling of processes, as well as recent advances in the processing of various materials, e.g., steels, light metals, composites, etc.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Dynamic Transformation during Simulated Hot RollingMultiple, Simultaneous, Martensitic Transformations: Implications on Transformation Texture IntensitiesAtomic Scale Investigation of Solutes and Precipitates in High Strength SteelsNumerical Simulation of Hot RollingFormation of an Ultrafine-Grained Austenite-Containing Microstructure from a Cold-Rolled Medium-Manganese Steel Processed Using Intercritical AnnealingThe Thermomechanical Controlled Processing of High-Strength Steel Plate: A New View of Toughness Based on Modern MetallographyComparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR SteelsControl of Microstructure by MaxStrain DeviceNovel Physical Simulation Technique Development for Multistage Metal Plastic Deformation ProcessingPhysical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline ApplicationsPhysical Simulation of Thermomechanical Processing of Multiphase Mn-Al Steels with Retained AusteniteDesigning a Novel DQ&P Process through Physical Simulation StudiesAchieving High Tensile Properties in a C-Mn-Si Structural Steel by Simulating Hot Rolling and Heat Treatment SchedulesThe Development of Interphase Precipitated Nanometre-Sized Carbides in the Advanced Low-Alloy SteelsEffect of Heating Process on Retained Austenite of Mn-TRIP SteelCrystallographic Features of Low-Carbon Bainite Formed under Non-Isothermal ConditionsModeling of Microstructure and Mechanical Properties of Hot Rolled SteelsModelling of Strain Rate and Temperature Dependent Flow Stresses of Supercooled Austenite for AISI 4140Recrystallization Behavior of 0.11% Ti-Added Complex Phase Steel during Hot CompressionCharacterization and Modeling of Softening Kinetics during Hot Deformation in Modern SteelsSoftening Kinetics in High Al-Nb Microalloyed SteelsStudy of the Effect of Thermomechanical Processing on Grain Refinement in HSLA SteelsDevelopment of Nano-Scale Precipitation Strengthened Hot-Rolled 590MPa Grade Wheel SteelMicrostructure and Mechanical Properties of X80 Induction Heating BendsEffect of Reheat Conditions on Microstructure Evolution and Precipitation Behavior in High Strength Linepipe SteelEffect of Different Cooling Paths on the Microstructure and Properties of a Plain Carbon SteelMicrostructural Evolution during Tempering of 16Cr-5Ni Stainless Steel: Effects on Final Mechanical PropertiesYoung's Modulus Profile in Kolsterized AISI 316L SteelEffect of Rare Earth Addition on Dynamic Recrystallization and Precipitation Behavior of a Niobium-Containing Microalloy SteelPhysical Modelling the Microstructure Formation in Advanced High-Strength SteelsMathematical Modelling of Hot Rolling: A Practical Tool to Improve Rolling Schedules and Steel PropertiesNumerical Simulation of Thermal Stress and Deformation in a Casting Using Finite Difference MethodNumerical Simulation of Casting Thermal Stress and Deformation Based on Finite Difference MethodResearch and Development on CAD/CAE Integration of Casting Process System Based on IGES Neutral FileAdvanced Methods in Modelling of Metallurgical Unit OperationsEffect of Interfacial Tension on the Emulsification of Slag - Considerations on the CFD Modelling of DispersionThree Phase CFD-Simulation of CAS-OB LadleNumerical Study on the Removal of Hydrogen and Nitrogen from the Melt of Medium Carbon Steel in Vacuum Tank DegasserSoft Reduction of a Cast Ingot on the Incomplete Crystallization StageIntroduction of Materials Modelling into Processing SimulationHybrid Modeling of Flat Rolling Process during Hot RollingEvolution of Strain in Multipass Hybrid Equal Channel Angular Pressing Using 3D Finite Element AnalysisSimulation of Thermomechanical Control Processing of Steels through the Use of Experimental Planning and FEMModelling of Grain Refinement Induced by SMAT Process, Using a Complete Numerical Chaining MethodologySteel Property and Process Models for Quality Control and OptimizationA Fast Optimization Approach for Multi-Pass Wire Drawing Processes with a Penalty Fitness FunctionNumerical Simulation of Temperature Field during Vacuum Sublimation Purification of Metal TmDie Stress Optimization Using Finite Element and Taguchi MethodConditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation CodesInfluence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic RecrystallisationMachining Profiling of the Working Rolls as a Way to Control Cross-Section of the Rolled SteelNumerical Investigation on Void Nucleation around Inclusions under Combined Mechanical and Thermal Cycling ConditionsChallenges in Finite Element Simulations of Chain of Manufacturing ProcessesApplication of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling ProcessOptimization of Local Laser Heat Treatment Process Using a Simple FE-ModelThe Numerical Simulation Research of Thermal Mechanical Simulation Compression Behavior with Uneven Temperature on EndEffect of Constrained Conditions on the Equivalent Strain and Microstructure of 5052 Al Alloy Deformed by Groove PressingHot Simulation Compression of In Situ TiBw/Ti6Al4V Composites with Novel Network MicrostructureNumerical Simulation of Bubble Migration in Liquid Titanium Melts under Hypergravity FieldTensile Testing of Ti-6Al-4V Alloy SuperplasticityPhysical Modelling of the Interaction between Softening and Nb (C,N) Strain-Induced Precipitation in High-Mn SteelsPrecipitation Processes in High-Manganese SteelsStudy on Cyclic Strain Localization and Fatigue Fracture Mechanism in High Manganese Twinning-Induced Plasticity SteelsEffects of Heat Treatment Process on Microstructure and Mechanical Properties of 31Mn2SiREB Cast SteelStudies on Martensite Transformation in a Metastable Austenitic Cr-Mn Stainless SteelModelling Tensile Curves of AISI 316L at High Temperatures Starting from Strain Hardening AnalysisThe Effect of Bonding Flaws on the Splitting Process in the Smart-Cut TechnologyModeling of Steels and Steel Surfaces Using Quantum Mechanical First Principles MethodsMaterials for Electronics by Thermal SprayingAl/Al2O3 Nanocomposite Produced by ECAPSimulation Study on the Influence of H2 on the Carbon Deposition in ICVI of Thick-Walled PerformFirst-Principles Study on Mn-Doped TiFeSb Half-Heusler Thermoelectric MaterialsWelding of Aluminum Matrix CompositesPhase Transitions and Microstructural Processes in Shape Memory AlloysSemi-Massive Nanocrystallised Composites: From the Process to Mechanical and Microstructural InvestigationsSurface Patterning of Stainless Steel in Prevention of Fouling in Heat Transfer EquipmentTuning the Composition and Microstructure of Fe-Based Alloy Thick Coatings for Heavy Duty ApplicationsMicrostructure and Strength of Si3N4 Joints Bonded with Sialon-Oxynitride GlassThe Effects of Phosphotungstic Heteropoly Acid on Degradation Behaviour of Hardened Epoxide Polymers in Near-Critical WaterSimulation of the Hot Extrusion Process of Sintered WCu40 Covered with a Steel CupMicrostructure and Reaction Mechanism of Multi-Laminated Ti-(SiCp/Al) Composites Subjected to Annealing at 1300?COn the Modelling of a Pulsed TIG Weld Process in a Nickel SuperalloyA Process Model for Electron Beam Welding with Variable ThicknessPhysical and Numerical Simulation of the Heat-Affected Zone of Multi-Pass WeldsPhysical Simulation of Weldability of Weldox 1300 SteelPhysical Simulation on Microstructure and Properties for Weld HAZ of X100 Pipeline SteelThe Effect of Stabilizers on the Grain Growth and Impact Toughness of 21%Cr Ferritic Stainless Steels High-Temperature Heat-Affected ZonesThermodynamic Modeling of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser BeamVerification of a Thermodynamic Model of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser BeamNumerical Simulation of SAW Heat Source in the External Longitudinal Magnetic Field in 16Mn SteelPhysical and Numerical Simulations of the Microstructure Evolution in AA6082 during Friction Stir Processing by Means of Hot Torsion and FEMDevelopment of Predicted Stress and Strain during Conventional and after Mitigation of Welded Aluminium-Manganese AlloyEffect of Sn Content on the Microstructure, Mechanical and Electrical Properties of Ti2AlC/Cu Joints Brazed with Cu-Sn-Ti Filler AlloyCharacterizing the Decomposition of Ti2AlC during its Brazing with Cu by Using Ag-Cu Filler AlloyFlow Characteristics of Vacuum Assisted Resin Transfer Molding Process Depending on the Capillary PhenomenonEffect of Friction and Lubrication on Formability of AA5182 Alloy in Hydroforming of Square CupsNumerical Simulation of Multiple-Step Incremental Roll-Bending Forming of a Large Metal Sheet to U-ShapeOptimization of Tilt-Casting of Aluminum Alloy Automobile Drain Pipes through Numerical SimulationThe Preparation and Curing Kinetics of Epoxy/PhS(4, 4'-dihydroxydiphe-nylsulfone)/aluminum tris (tetradecylacetoacetate) Latent Resin SystemScale Monitoring System Tested at Ruukki Metals Plate Mill in RaaheThe Possibility to Use Optical Emission Spectrometry for Identifying the Amount of Inclusions in SteelsSignal Processing Method (HT and HHT) of AE for Complex Fault DetectionVibration Analysis of Ship Propulsion Shaft with the Stern Bearing CharacteristicsEigenvalue Analysis of Roots Type Vacuum Pump Using FE-MethodEvaluation of the Fatigue Life in Aluminum Alloy Welded Joint by Nonlinear Ultrasonic TestingFatigue Life Prediction of Stainless Steel Laser Lap Joints Based on Natural Frequency ChangesSupersonic Lance Mass Transfer ModellingNew Continuous Casting and Slab Tracking Simulators for Steel IndustryExperimental Validation of the Carbon Diffusion Model for Transformation of Ferritic-Pearlitic Microstructure into Austenite during Continuous Annealing of Dual Phase SteelsEffect of Hot Deformation Temperature on the Restoration Mechanisms and Texture in a High-Cr Ferritic Stainless SteelPhysical Simulation for Evaluating Heat-Affected Zone Toughness of High and Ultra-High Strength SteelsSimulation of Active Shielding Gas Impact on Heat Distribution in the Weld ZoneHardness Profiles of Quenched Steel Heat Affected ZonesAtomistic Study of Surfaces and Interfaces of Fe-Cr and Fe-Cr-Al AlloysCorrosion Resistance of Welds in 21%Cr Ferritic Stainless Steels ? Is it Comparable to Type 304L?Effect of Thermal Treatment after Hot Rolling on the Microstructure of Fe-2.4wt.%SiEffect of the Si and Al Content in Ferritic Electrical Steels on the Flow Behaviour and Dynamic Softening in Hot RollingModelling the Hot Deformation Stress-Strain Curve of a Ni-Based SuperalloyFour Dimensional Description of the Stress-Strain Relationship of Sintered and Swaged Tungsten PowdersFEM-Based Analysis of Micro-Structure Parameters for Roll Forming on Aluminum Alloy SheetComputational and Experimental Investigation on Thermal Conductivity of Si? Particle Reinforced Al-Matrix Composite Containing PoresForecasting of Hard-Alloyed Cutting Tool Resistance Based on Thermal DiffusivityTheory of Constrained Cutting: Model of Chip Formation with a Developed Plastic-Deformation Zone
