Sonstiges, Englisch, Band Volume 660, 1126 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 660, 1126 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-974-9
Verlag: Trans Tech Publications
The 201 papers are grouped as follows:
Chapter 1: Materials Science, Technologies of Production and Materials Processing,
Chapter 2: Alternative Fuel and Engines,
Chapter 3: Aeronautical Systems and Technology,
Chapter 4: Acoustics and Vibration,
Chapter 5: Fatigue and Fracture Mechanics,
Chapter 6: Fluid Mechanics and Heat Transfer in Engineering Practice,
Chapter 7: Researching and Designing of Parts and Assemblies of Machines and Mechanisms,
Chapter 8: Mechatronics and Industrial Automation,
Chapter 9: Biomechanics and Biomedical Engineering,
Chapter 10: Industrial Engineering and Production Management
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Finite Element Simulation of the Drawability of Tailor-Welded BlankInfluence of Depth of Cut on Contact Phenomenon in MicromachiningEffect of Nitrogen Gas and Nitrogen-Oil-Mist Conditions when Turning of STAVAX ESR SteelComparison between Nitrogen-Oil-Mist and Air-Oil-Mist Condition when Turning of Hardened Tool Stainless SteelInclination Angle Effect on Surface of Copper in BiomachiningOptimisation of Processing Condition Using Taguchi Method on Warpage for HDPE-Clay CompositeOptimisation of Processing Condition Using Taguchi Method on Strength of HDPE-Natural Fibres Micro CompositeThe Influence of Sewage Fat Composition on Rheological Behavior of Metal Injection MouldingThe Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-SinkingPerformance Evaluation of Electrical Discharge Machining Die Sinking on Stainless Steel 316L Using Copper Impregnated GraphiteLaser Assisted Micro-Groove Ball Milling of Ti6Al4VOptimization of Laser Cutting Parameters on the Laminated Carbon Fibre Reinforced Plastics (CFRP) Composites Using DOE TechniqueThe Effect on the Application of Coolant and Ultrasonic Vibration Assisted Micro Milling on Machining PerformanceThe Effect of Machining Parameters on Surface Integrity when Milling Hardened SteelA Study of Auto Pour in Sand Casting ProcessInvestigation on Laser Assisted Micro Ball Milling of Inconel 718Melt Flow Behavior of Metal Filled in Polymer Matrix for Fused Deposition Modeling (FDM) FilamentMelt Flow Behavior of Polymer Matrix Extrusion for Fused Deposition Modeling (FDM)Overcoming Limitation in DFM Using Layer ManufacturingDirect Investment Casting Numerical Study for ABS P400 FDM MaterialsExperimental Analysis on Ultrasonic Assisted Turning (UAT) Based on Innovated Tool Holder in the Scope of Dry & Wet MachiningWelding Parameter Optimization of Surface Quality by Taguchi MethodAn Experimental Investigation into Different Distortion Control Techniques in Welded T-JointsMulti-Response Optimization Using Taguchi Method of Resistance Spot Welding ParametersAnalysis of Mechanical Properties for 2D Woven Kenaf CompositeEffect of Temperature and Salinity on the Localized Corrosion of Stainless Steel 316LCorrosion Behavior of WC-Co and WC-Ni in 3.5% NaCl at Increasing TemperatureAn Investigation Effects of Electrospinning Parameters: Process Optimization by Application of Response Surface MethodologyThe Effect of Bottom Ash on Fresh Characteristic, Compressive Strength and Water Absorption of Self-Compacting ConcreteStress Distribution in Composite Double-Lap Bolted Joints Incorporating with Clamp-UpSynthesis of Zeolite from Geothermal WasteInfluence of the Supplementary Cementitious Materials on the Dynamic Properties of ConcreteElectrical Characterisation of Highly Doped Triangular Silicon NanowiresEffect of Temperature and Composition of Palm Oil Fuel Ash on Compressive Strength of PorcelainEffect of Nitriding on Reaction Layer of Diffusion Bonded Sialon to AISI 420 Martensitic Stainless SteelMicrostructure and Adhesion of NiAl/Al and NiAl/Ni Coatings Formed by SHS ProcessPreparation of Palm Oil Fuel Ash Composite as Green PigmentEffect of High Cerium and Lanthanum on Impact Toughness of Al-11Si-Cu Eutectic Cast AlloyEffect of Cathodic Hydrogen Charging on Mechanical Properties of AISI 304 Austenitic Stainless Steel WeldsMultiple Reprocessing of Gear Using Recycled PolypropyleneRheological Properties of Copper-Graphite MIM Feedstocks Prepared with Waste PET BinderFabrication of AA6061-0/RHA Surface Composite via Friction Stir ProcessingReview on Ceramic Application in Automotive Turbocharged EnginesIron Oxide Rust as Raw Material for the Production of Red Pigment in Paint IndustryParameter Optimization of Debinding Injection Moulded Ti-6Al-4V Mix with Palm Stearin and PolyethyleneMixing Study of Aluminium Waste as Metal Powder for Waste Polystyrene Binder System in Metal Injection Molding (MIM)Rheological Properties of Kaolin/PolyetherSulfone(PESf) Used in Hollow Fiber Fabrication: Effects of Content RatioEffect of Ti Addition on Oxidation Behavior and Area Specific Resistance of Fe-20Cr Alloys for SOFC InterconnectsInvestigating Foamed Bitumen ViscosityViscosity Analysis of Copper Powder Mixed with Palm Stearin Based BinderThe Effect of TiCl4 and Chitosan Concentration on the Coating of TiO2 on Iron Foam Substrate by Self-Assembled Monolayer MethodEvaluations of Mechanical Properties and Residual Strength of Drilled Glass Fiber Reinforced Polymer (GFRP) CompositesComparison Design of Experiment (DOE): Taguchi Method and Full Factorial Design in Surface RoughnessEffect of Cr to Fe on the Solid Solubility, Lattice Parameter and Strain of Fe80Cr20 Alloy PowderImpact of Alkali Treatment Conditions on Kenaf Fiber Polyester Composite Tensile StrengthSynthesis of Barium Hexaferrite with Addition of Tapioca as Rodlike TemplateIdentification of Methyl Ester Content from Waste Cooking Oil Using Gas Chromatographic MethodApplication of Molasses as a Binder in Sand Mold OperationTensile Properties and Morphology of Recycled Latex Glove Filled Epoxidized Natural Rubber (ENR50) CompoundsMechanical Properties of Class C High Volume Fly Ash Concrete with Lime Water as Mixing WaterEffect of Die Gap and Punch Travel on Springback in Air V-Bending Process Using Taguchi MethodOptimizing Pulsed Current Micro Plasma Arc Welding Parameters to Maximize Ultimate Tensile Strength of AISI 304L Sheets Using Response Surface MethodDevelopment of Pressure Torch Brazing SystemEffects of Temperature and Strain Rate on Commercial Aluminum Alloy AA5083Dynamic Explicit Finite Element Code for U-Bending Simulation and Springback PredictionPrediction of Flux Cored Arc Welding (FCAW) Parameters and Bead Geometry in Downhill Position (3F)Mathematical Modeling for the Prediction of Depth of Penetration in Double Pulse GMA Welding Using Fractional Factorial MethodEmpty Fruit Bunches Oil as New LubricantThe Performance of Modified Jatropha-Oil Based Trimethylolpropane (TMP) Ester on Tribology Characteristic for Sustainable Metalworking Fluids (MWFs)Effect of Heat Compression on the Tensile Strength of PALF/Sugarcane Bagasse for Disposable PlateThin Layer Modeling of Grated Coconut DryingSoda Anthraquinone Pulping of Oil Palm Male Flower SpikesCO2 Absorption in a 5M Aqueous Solution of 2-(Diethylamino)EthanolThe Effects of Storage Duration on Biodiesel Derived from Waste Cooking OilThermal and Electrical Experimental Characterization of Ethylene Glycol and Water Mixture Coolants for a 400 W Proton Exchange Membrane FuelNOx Emission of Diesel Fuel Blended with Different Saturation Degrees of Biofuel and with OxygenatorOptimum Excess Air for the Utilization of Palm Biodiesel Blends in Fire Tube BoilerEffect of Injector Nozzle Design on Spray Characteristics for Hydrogen Direct Injection Engine ConditionsSimulation Analysis of the Effect of Temperature and Exchange Current Density on Power and Hydrogen Production of (PEM) ElectrolyzerThe Effect of Adding Additives on the Mixture of 80% Methanol 96% 20% Ethanol 10% as a Renewable Fuel to Kerosene SubstituteEffect of Mixture Formation of Biodiesel-Water-Air Rapid Mixing Derived from Crude Palm Oil and Waste Cooking Oil in Burner CombustionLow and High Purity Methanol Effect on Performance and Smoke Emission of Direct Injection Diesel Engine with Cooled EGR Fueled by Diesel Fuel and Jatropha Oil BlendsInfluences of Cylinder Wall Temperature on Heat Release during Compression PeriodHydrogen (Al+HCl) Improve the Combustion of Gasoline Engine and Reduction the Hydrocarbon and Carbon Monoxide up 33% to 34%Mass Fraction Burn Comparison of Compressed Natural Gas and GasolineOne-Dimensional Simulation of the Combustion Process in an Engine Cylinder with EthanolCombustion Characteristic of a Diesel Engine Operating with Methanol as Alternative FuelExhaust Emission Reduction of Diesel Engine Fueled with Emulsified Palm Oil Methyl EstersExperimental Investigation of Emissions Characteristics of Small Diesel Engine Fuelled by Blended Crude Palm OilPredicting the Performance and Emissions Characteristics of a Medium Duty Engine Retrofitted with Compressed Natural Gas System Using 1-Dimensional SoftwareExperimental Investigation of Mixture Formation and Flame Development Using the Basics Technique of Schlieren Optical Visualization PrincipleStudy on the Rudder Effect to the Lateral and Directional Flight Behaviors of the Turbojet Driven Light AircraftEvolutionary Algorithm Based Multi-Objective Aerodynamics Optimization Method for Low Reynolds Number AirfoilThe Aerodynamics Analysis on Cambered Fuselage ModelAn Evolution of Hybrid Airship Vehicle (HAV) Envelope: Aerodynamics AnalysisStability and Takeoff Ground Roll Issues of Hybrid Buoyant AircraftStudy of Passive Vibration Absorbers Attached on Beam StructureUnderwater Acoustics Evaluation of Glass Fiber ? Polyurethane Sandwich CompositeThe Effect Carbon Fiber Pole on Hand-Arm Vibration of Palm Fruit Motorised CutterAdjustable Acoustical Performance Based on Deformable Origamic Shapes: A Preliminary Experimental InvestigationVibration Exposure Analysis of the Polysiloxane Reinforced with Rice Husk SilicaVibration Response on MiNT-SRC Building due to Ground Borne Vibrations from Humans Using Finite Element ModelingPhysical and Sound Absorption Properties of Spent Tea Leaf Fiber Filled Polyurethane Foam CompositeComputer Simulation of Fracture Process in Compressive Failure of Cross-Ply Laminate of Composite MaterialsPrediction of Energy Absorption of Al-Based FGM Crash Box under Quasi-Static and Dynamic LoadingMeasurement of Mechanical Properties of St 37 Material at High Strain Rates Using a Split Hopkinson Pressure BarStress Analysis of the Impactor Assembly of the Dropped Weight Impact Testing MachineImpacted of Vacuum Bag Woven Kenaf/Fiberglass Hybrid CompositeThe Effects of Spot Weld Pitch to the Axial Crushing Characteristics of Top-Hat Crash BoxStress Analysis of Intermittent Failure in Electrical Wire CablesInvestigation on the Tensile Strength of Treated and Untreated Woven Sugar Palm Fibre Reinforced CompositesDesign Flaw Enhanced by Improper Workmanship to Cause Fatigue Failure on Rotor Blade of Compressor Gas TurbineNumerical Study on Failure Process of Aluminium Plate Subjected to Normal Impact by Hemispherical ProjectilesEvaluation of Shear Strength of Concrete Beams with GFRP ReinforcementImpact Behavior of Square Crash Box Structures Having Holes at CornersCharacteristics of Adhesive Joints under Rate-Dependent Tensile LoadingFinite Element Simulation of Ductile Failure Process of Spot Welded Joint under Tensile LoadingExperimental and Numerical Study - Effects of Crush Initiators under Quasi-Static Axial Load of Thin Wall Square TubeRollover Analysis of Heavy Vehicle BusFlutter Speed Determination of Two Degree of Freedom Model Using Discrete Vortex MethodDrying of Sponge Media Using Swirling Fluidized Bed DryerHydrodynamic Characteristics of Flow around Tube Bank with Integral Wake SplitterAn Experimental Study of Heat Transfer Coefficient in a Bubble Flow throughout an Annulus Pipe Heated at Inner WallA Parametric Study of Wind Catcher Model in a Typical System of Evaporative Cooling Tower Using CFDParametric Study on Anti-Vortex Film Cooling Hole ArrangementsFlow Diagnostics in Shock Wave-Boundary Layer Interaction Experiments in Hypersonic FlowNumerical Study of Flow Past a Solid Sphere at Moderate Reynolds NumberInvestigation of Boiling Heat Transfer and Flow Regimes in a Heat ExchangerHeat Transfer Performance of Titanium Oxide in Ethylene Glycol Based Nanofluids under Transition FlowAn Evaluation of Drag Coefficient of Wind Turbine System Installed on Moving CarFlow Characteristics Study in Kitchen Hood Using AnsysGravitational Effect Formulation on In-House Air-Particle Flow SolverSimulation of Water Mist Spray for Commercial Kitchen Ventilation (CKV) System Using Ansys-CFDExperimental Study of Water Heating Efficiency between Aluminium and Copper Absorber Plate in Solar Flat Plate CollectorExperimental Study of Splitting Device for Horizontal PipelineEffect of Baffle Openings to the Flow Distribution in a SERVCO Fume CupboardCFD Simulation of a Simplified Automotive Model for Various Rear Slant AngleThermal Conductivity Enhancement of Aluminium Oxide Nanofluid in Ethylene GlycolViscosity of Aluminium Oxide (Al2O3) Nanoparticle Dispersed in Ethylene GlycolPerformance Analysis of Integrated Collector System with Immersed Coil Heat ExchangerThe Application of the Micro-Siting Technique in Tioman Island, Malaysia Using the RIAM-COMPACT SoftwareAnalysis of the Chassis and Components of all Terrain Vehicle (ATV)Surface Roughness Identification of Cutting Product on Design Aspect Variation of Modular Axis MechanismA Feasibility Study of Magnetorheological Elastomer Base IsolatorA New Approach to Reduce the Thermal Modeling Experiment Time by Estimating the Settling TimeJoint Stiffness of 3D Space Frame Thin Walled Structural Joint Considering Local Buckling EffectExperimental Analysis of Kenaf Filament Wound Tubes under Axial Compression LoadThe Effect of Room Temperature on the Generator?s Winding Coils TemperatureFinite Element Analysis of Sheet Metal Formability Effect on Automotive PartEstablishing Correlation between Leaf Spring Specifications and Camber DropPrediction of Surge Motion Response of Floating Structure Using Kalman Smoother Adaptive Filters Based Time-Domain Volterra ModelAssessment of Child Occupant Protection in ASEAN NCAPDevelopment of Mixed Vertical Axis Wind Turbine (MVAWT) for Low Wind ConditionAn Effect of Fractal Baffles and Impellers with Double Stage 4-Blade Rushton Turbine to Fluid Flow Behaviour in Stirred TankA Platform for Digital Reproduction Sound of Traditional Musical Instrument KompangModeling of Heat Exchanger by Using Bio-Inspired AlgorithmFEA-Based Design Study of 12-Slot 14-Pole Outer-Rotor Dual Excitation Flux Switching Machine for Direct Drive Electric Vehicle ApplicationsImplementation of PLC System in Fish Feeding Rate DeterminationEnhancement of Electrical Distribution System Operation Using Intelligent Optimization Techniques Considering Unbalanced ConditionDesign Concept of Two Tank Reservoirs to Maintain pH Value for Tiger PrawnNew Design Flexible Link Aerator to Generate Dissolved Oxygen in WaterExperimental Investigation of Multiple Coils Magnetorheological Damper under Dynamic LoadingsPeriodic Cubic Spline on Motion of Five-Link Human Bipedal Model Using Nonlinear Predictive ControlAn Open STEP-NC Controller via LabVIEW PlatformA New ISO 14649 Translation Module for Open Architecture CNC SystemsCAIP Application in OMM Operation for Box Primitive Feature: Inpection Code Generation for on Machine Measurement OperationDevelopment of Computer Aided Inspection Planning (CAIP) Application in on Machine Measurement Operation (OMM) Operations for Box Primitive Features: Generating Inspection CodesSimple Microcantilever Release Process of Silicon Piezoresistive Microcantilever Sensor Using Wet EtchingFabrication Techniques for PDMS Dome-Shaped Membrane Using Soft Lithography ProcessDesign, Manufacturing, and Laboratory Testing of Peristaltic Pipe-Surveillance RobotDevelopment of a Hand-Arm Model to Emulate Tremor Handwriting BehaviorMonte Carlo Simulation of Gas Spring in an Energy Storing Prosthetic KneeValidity of Kinect for Assessment of Joint Motion during GaitReview on Fluid Structure Interaction Solution Method for Biomechanical ApplicationExperimental Study on the Effect of Pinch Parameters and Fluid Viscosity to Flow in Closed Loop Impedance PumpDevelopment of HVOF Coating of Hydroxy Apatite on Titanium Alloy with Carbon Nano Tube Intermediate LayerSynthesis and Characterization of Zinc Doped Hydroxyapatite for Bone Substitute ApplicationsThe Adoption of Lean and Cleaner Production ? A Preliminary Study for Malaysia Manufacturing IndustrySimplified MRP for Bench Vice Through Production Base Education (PBE) in POLMAN BandungThe Critical Role of TQM, JIT, and TPM in the Revisiting World Class Manufacturing and Manufacturing ExcellenceManufacturing Flexibility and Operational Performance: Empirical Evidence in Manufacturing SMEsAnalysis and Reduction of the Waste in the Work Process Using Time Study Analysis: A Case StudyEnhancing Firm Competitiveness through Concurrent Implementation of TQM, JIT and TPMImpact of RFID and Xbee Communication Network on Supply Chain ManagementIssues in Total Productive Maintenance (TPM) Implementation: Justification of Employing Case Study MethodologyThe Preventive Maintenance Schedule: A Case Study at Aman Sales and Services Sdn. Bhd. and Ladang Sabah Palm Oil Mill.The Effect of Demographics on Customer Satisfaction amongst Malaysia Hajj Pilgrims: Survey ResultThe Mediator Effect of Customer Satisfaction between Quality Management Practices and Communication Behavior amongst Malaysia Hajj Pilgrims: Survey ResultReal-Time Scheduling Procedures Based on Autonomous Distributed Manufacturing System (ADiMS) ConceptRealizing Lean Concept in Automotive Parts Production: Child Parts in Sub-Assembly LineLife Cycle Costing Model for Hollow Fibre Membrane Module: A Review and Further ResearchTwo Dimensional Maintenance Contracts for a Fleet of Dump Trucks Used in Mining IndustryEmployees? Perception on Lean Production System Implementation: A Case of Malaysia Automotive Component ManufacturerProduction Improvement in an Aircraft Manufacturing Company Using Value Stream Mapping ApproachA Review on the Total Productive Maintenance (TPM) Conceptual FrameworkDesign Evaluation Method for Design Engineer in Manufacturing Industries Using Integrated Rough-Grey Analysis ApproachMismatch Analysis of Elementary School Desk and Chair Key Characteristics in IndonesiaExperimental Design for Reverse Assembly Based Disassembly ProcessA Sustainable Product Realization Strategy Using Decomposition-Based ApproachEnergy Saving Measures for University Public Library: A Case Study of UTHM Library
