New Polymer Composite Materials II

Erscheinungsjahr 2020
ISBN: 978-3-0357-1800-3
Verlag: Trans Tech Publications

Buch, Englisch, 618 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1170 g

This issue of the journal presents materials of the XVI INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE 'NEW POLYMER COMPOSITE MATERIALS', which was held in the Kh.M. Berbekov Kabardino-Balkarian State University. The content of the presented papers reflects the results of research in the field of polymer synthesis and the development of new polymer composite materials, as well as the various aspects of their application.

Autoren/Hrsg.

Khashirova, Svetlana Yu.

Zhansitov, Azamat A.

Vindizheva, Amina

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Polymerwerkstoffe
• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Technologie der Kunststoffe und Polymere
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe

Inhaltsverzeichnis

Preface
The Use of Composite Polymeric Materials to Increase the Effectiveness of Ship Ventilation Systems
Thermoplastic Characteristics of Polymer Composite Materials Used for the Manufacture of Ship Systems Pipelines
Synthesis of Aromatic Polyethersulfones
High Performance Aromatic Polyethersulfones
Introduction of Nanoscale Porous Aromatic Frameworks in PTMSP Matrix
Synthesis of Poly-N,N–Dialylaminoethanoic Acid and Investigation of his Mutagenic Action on the Test System Drosofila Melanogaster
Gas Separation Membranes Based on Germanium Containing Polyalkylenesiloxane
Influence of Casting Method on Pervaporational Performanses of Polyheptylmethylsiloxane Membranes
Concerning the Application Possibility of Ultrasonic Welding of Textile Materials on the Basis of Synthetic Fibres in the Manufacturing Processes of Parachute Systems
Exploring the Complexation of Counterion in Novel Family of Polyelectrolytes with Unexpected Solubility Behaviour
Infrared Spectrum and Thermal Properties of LDPE, EVA and Fly Ash Composites
Morphology and Mechanical Properties of LDPE, EVA and Fly Ash Composites
Optimization of the Reaction of Catalytic Cycloalkylation of Phenol with Cyclohexene
Application of Adhesives in Cosmetology
Sealing Materials Based on Polymers
Medical Nonwovens: Effects of Radiation Sterilization on Bursting Strength
Obtaining Nanofibers Na-CMC in Mechanomagnetic Activated Water Solution for the Purpose of Reinforcing Concrete Structure
The Catalytic Synthesis of Wholly Aromatic Polyesters Based on 4-hydroxybenzoic Acid via Direct Esterification
Metal-Containing Monomers Based on Copper and Zinc Salts of Unsaturated Acids and Pendent 4-phenyl-2,2':6',2''-terpyridine Ligands: Synthesis, Characterization and Thermal Properties
Photopolymerization of OCDMA Dimetacrylate Initiated by 3,5-Di-tert-Butyl-o- Quinone and its Bis-O-Benzoquinone
Determination of the Composition of Substances Migrating from Plugs Based on Bromo-Butyl Rubber into Infusion and Injection Preparations
The Effect of Thermal Degradation Processes on the Physical-Mechanical and Rheological Properties of Polyketone
Composite Bitumen Binders Based on an Active Powder of Discretely Devulcanized Tire Rubber
One-Component Urethane Sealants Synthesis
Reinforcement of Elastomers Based on Butadiene Rubbers and their Mixtures with Layered Silicates
Synthesis and Application of Copolymers Based on Styrene, Divinylbenzene and Functionalizing Monomers
Unsaturated Polyester Resins and Fiber-Reinforced Polymer Composites from Plant Biomass
New Plasticizers on the Based on 2,5-Furandicaboxylic Acid and 5,5-Oxy-Bis(methylene)bis-Furane-2-Caboxylic Acid Diesters
Triethylene Glycol Dehydration by Thermopervaporation
Properties of Hyperbranched Polyglycidol’s Derivatives
Numerical Model of the Mass Transfer Transition States in the Vacuum Infusion Process of the Polymer Matrix and the Reinforcing Filler Structure
Modeling of Residual Stresses in a Polymer Cylinder Arising from Rotation and Cooling of the Starting Material
Rheological Aspects of Multilayered Thick-Wall Polymeric Pipes under the Influence of Internal Pressure
Complex Stabilizer Based on Calcium and Zinc Stearates for PVC Compounds
Modification of the Recipe of Industrial PVC Plastic for Increasing its Fire Resistance
Effect of Technical Carbon the Deformation-Strength Properties of Low Pressure Polyethylene
Influence of Different Factors on the Oxidizing Polymerization of 3-Amino-3 ´-Nitrodiphenylazomethine and some Properties of the Received Polymer
Organic Aerogels Based on Epoxy Resins: Synthesis and Properties
Charge Propagation along the Polymer Fiber of Polyhydroxybutyrate: Is it Possible to Apply the Cable Model?
The Aging, Biodegradation and Toxic Effects of the Polymer Biomedical Implants in Dental Practice
Preparation of R-BABP Polyimide Fibers via Wet Spinning of Polyamide Acid
Optimization of Structure of Soft Block for Design of Adaptive Polyurethanes
The Thermal Stability and Mechanical Properties of Non-Segregating Blends of Polyimides with Copoly(Urethane-Imide)s
Effect of Non-Equilibrium Low Temperature Plasma on Genuine Leather Adhesion Properties of Special Purpose Footwear Upper to Molding Compositions with Polyurethanes Base
Synthesis and Properties of Polymers Based on N-Vinyl-Pyrrolidone and Halogen-Containing Compounds of Acrylic Acids
Phase Transitions in Polyester-Polyether Copolymers
The Influence of Biopolymer Coated Fertilizer on the Agrochemical Parameters of the Soil
CO2 Absorption/Desorption on Gas-Liquid Membrane Contactors Using Monoethanolamine Solvent: Comparison of Porous and Composite Hollow Fibers
Composite Reinforcement as a Way to Increase the Durability of Building Structures
Study of the Influence of the Forming Method on the Physical and Mechanical Characteristics of Thermoplastic Polymeric Materials
The Effect of Inorganic Fillers on the Polyaniline Synthesis
Isomerization of Allyl Derivatives of Bisphenol A
Working out the Method of Obtaining Radio-Absorbing Composite Material Based on Magnetite Nanoparticles and Polydimethylsiloxanes
Effect of Annealing on Proton Conductivity of Aquivion-Like Proton-Exchange Membrane
Thermal Properties of Poly(3-(2'-Ethyl)Hexylthiophene): Study with a Real-Time Combination of Synchrotron X-Ray Scattering and Ultrafast Chip Calorimetry
Optimization of Film Composite Functional Properties for Sewing Products
Development of Approaches for Producing Polymeric Composite Materials with Higher Strength
The Effect of Surface Treatment of PET Films on Adhesive Properties
The Modeling of Interfacial Contacts in Composites Using the Sitting Drop - Solid Body System as an Example
Pervaporation Separation of Toluene/TEG Mixture with PIM-1 Membrane
Bio-Based Anti-Corrosion Polymer Coating for Fuel Cells Bipolar Plates
Polymeric Composites for Filling Bone Cavities
Research of Structure and Properties of Rubber Mixtures with Adhesion Additives on the Basis of Carbamide
Cross-Linked PIM-1 Membranes with Improved Stability to Aromatics
Preparation of Fine Porous Ultrafiltration Membranes from Polyacrylonitrile
Properties of Polysulfone Hollow Fiber Membranes Depending on the Method of the Spinning Solution Preparing
Roofing Materials Based on Synthetic Rubbers with Additives - Waste Products
Synthesis of Aromatic Polyether Ketones by Electrophilic Substitution
3D-Printing Methods for Crystalline Polyetheretherketone
Investigation of the Effect of the Length and Content of Carbon Fibers on the Properties of Polyphenylene Sulfide
Influence of Concentration of Carbon and Glass Fibers, Melt Viscosity, and Number of Extrusions on the Porosity of Composites Based on Polyphenylene Sulphone, Polyethyrimide and Polyphenylene Sulfide
The Effect of Sizing Additives for Carbon Fiber on the Mechanical Properties of Polyetherimide Composites
Study of the Effect of Organoclay on the Structure of Cable PVC Compound
Biologically Destroyable Polymer Compositions with the Use of Natural Filler
Kinetic Features of Isophorone Diisocyanate and Oligoesterdiols Reaction under Waterborne Polyurethane Synthesis Conditions and the Preparation of the Polymer Dispersions
The Influence of Phases Division Surface in Nanocomposites Polymer/2D-Nanofiller on their Reinforcement Degree - The Percolation Model
Features of Formation of a Multifilament Yarn from Crystallizing and Amorphic High-Heat Resistant Thermoplastics
On the Synthesis of Copolyarylene Ether Ketones by Nucleophilic Substitution Reaction
The Effect of Water on the Thermal and Thermooxidative Destruction Processes of some Polyheteroarylenes
Investigation of the Ability of the Organophosphorus Compound Tetrakis(2,4-Di-Tert-Butylphenyl)-4,4'-Biphenyl Diphosphonite to Polyetheretherketone Stabilize
The Influence of Sparse Filling of FDM-Printed Samples on Mechanical Properties of Polyphenylene Sulfone and a Carbon-Filled Composite Based on it
Modification of Industrial Polyphenylene Ether Sulfone by New Block Copolymers Containing Oxime Groups
Features of Obtaining Carbon Plastics Based on Superstructural Polymer Materials
Synthesis of Aromatic Diketoximes and their Complexes with Nickel Salts
Composite Materials Based on Natural Polysaccharides and Polyguanidines
Glass-Filled Composite Materials Based on Polyarylene Ether Sulfones
Bio-Based Conductive Polymer Composite Materials for Fuel Cells Bipolar Plates