Buch, Englisch, 864 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
Buch, Englisch, 864 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
ISBN: 978-3-03835-025-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Materials Science
Synthesis, Crystal Structure and Antibacterial Activity of 4-Hydroxy-Benzaldehyde Benzoyl Hydrazone
Study on Scale Inhibition Performance of Modified Polyaspartic Acid
Artificial Ceramic Metamaterial with Meshed Grid Structure for Radome Application
Theoretical Study on Adsorption and Doping of Pd Atom on Graphene
Research on the Adsorption Law of the Titanium Dioxide Photocatalyst to the Dye
Catalysis Investigation of PET Depolymerization with Brønsted Acidic Ionic Liquid under Microwave Irradiation
Synthesis of Poly(vinyl alcohol)/Chitosan/Silicon Oxide Beads Untreated and Glutaraldehyde Treated
Cr, Fe - Doped Anatase TiO2 Photocatalyst: DFT+U Investigation on Band Gap
First Principle Study of Hydrazine and OH- Co-Adsorption on Ni(111) in High Coverage System
Morphology-Driven Stark Shift Switching in Ge/Si Type-II Heterointerfaces
Laser-Induced Copper Deposition from Solution: Removing the Thermodynamic Restrictions
The Research on Re-Design of Ceramic Products
Synthesis and Characterization of Hydroxyapatite Powder from Natural Gypsum Rock
Study on the Electrochemical Performance of High Tap Density LiFePO4/C Synthesized by Spray-Drying
The Effect of Annealing Heat Treatment on the Microstructure and Macroscopic Properties of Kinetic-Sprayed Ta Coating Layer
Preparation and Structural Characterization of CaCu3Ti4O12 Doped with Nickel, Ferrite, Manganese and Cobalt
Thermal Class Evaluation of Glass Net Used for Transformer
Molecular Dynamics Simulation of Void Structures in Vitreous Silica
A Geometry Method for Calculating the Fiber Diameter Reduction in Melt Blowing
A Novel Charged Iridium (III) Complex for Amine Sensor Application
Effect of Reduction Process Parameter in Direct Reduction Process of Laterite to Produce Substitute Pig Iron for Thin Wall Ductile Iron Material
A Study on Application of Surfactants in Cemented Carbides Ball Milling
Novel Approach to Studying Local Electrochemical Processes Inside Cavities
Application of New Photonic Materials in Development of Psychological Disease Intervention Perspective & Diagnosis
Application of Green & Environmentally Friendly Materials in Traditional Art Education
Chapter 2: Nanomaterials and Nanotechnologies
Ultrasonic-Assisted Electroless Plating of Silver Nanoparticles on Carbon Nanotubes
Disc-Electrospun Nano/Macro-Scale PCL Fibers with Nanoporous Structure
Synthesis and Characterization of Porous ZnO-CNT Nanocomposites Prepared by Microwave Plasma Jet Chemical Vapor Deposition System
Preparation and Characterization of Polypropylene/MMT Nanocomposites
Effect of NaOH Concentration and the Addition of NiCl2 on the Preparation of Ni/NiO/C Composite Nanofibers
Application of Smart Nanomaterials in Rheumatism Drug Delivery Systems
Application of Nano Measurement in Development of Breast Cancer Perspective & Diagnosis
Composite Nanofibers Containing Microparticles Produced via a Stepped Pyramid-Shaped Spinneret
Influence of Interfacial Exchange Interaction on the Two-Phase Relaxation Time of Superparamagnetic Nanoparticles
Dependence of the Magnetic State of a Multi-Axis Nanoparticles from the Induced Anisotropy
Preparation of Al2O3-TiO2 Complex Supports by Nano-Scale Self-Assembly Technique
Removal of Silver (I) from Aqueous Solutions by Chitosan/Carbon Nanotube Nanocomposite Beads
The Optimized Assembly Mechanism Research of MorpHology of Hydrothermally Synthesized Nano-Alumina under Neutral Conditions
Control of the Texture Structure Size in Anisotropic Etching of Silicon
Mechanism of Memristor with TiO2-x/TiO2/TiO2+x Nano Thin Three Layers
Optimized Responsivity of Size-Tailored SbBiSe3 Nanowire Photodetectors
The Plasmonic Nanostructures Applied in the Photovoltaic Cell
The Analysis of “Super Extension” Behavior and “Self-Cleaning” Mechanism for Anti-Rust Nano-Composite Coating of Reinforcement
Preparation of PEG Functionalized Nanoparticles for Drug Delivery to Cancer Cells
Chapter 3: Polymers and Composites
Experimental Study on the Uniaxial Compression Curves of Green High-Performance Fiber-Reinforced Cementitious Composites (GHPFRCC)
Curing Kinetics Analysis and Properties Researches of Cyanate Composites
Thermal, Mechanical and Dielectric Properties of Silicon Carbide/Polyphenylene Sulfide Composites
Fundamental Research of Guide Sleeves in 3D Weaving Composites
Experimental Study on Fire Characteristics of Building External Thermal Insulation Composite Systems Based on Polystyrene Foam
Effect of Epoxy-Functionalized Acrylonitrile-Butadiene-Styrene on the Morphology and Rheological Properties of Poly(butylene terephthalate)/Poly(acrylonitrile-styrene-acrylate) Blends
Properties of Thermoplastic Blends with Polypropylene and Collagen Hydrolizate
Preparation and Properties of Polyimide/MWNTs-COOH Antistatic Composites
The Effect of the Chopped Fibers on the Damping Characteristics of Fiber Reinforced Polymer Skins of the Polypropylene Honeycomb Sandwich Panel
Characterisation of Hand-Cast Polysiloxane-Silica Sheet Composite
Compatibility Effect of Reactive Copolymers on the Morphology, Rheology, and Mechanical Properties of Recycled Poly(ethylene terephthalate)/Polypropylene Blends
Thermal Conductivity Cyanate Ester Resin Composites Filled with Boron Nitride
SEM, AFM and LFM Study of the Worn Surface of C/C Composites with Smooth Lamination and Rough Lamination/Resin Carbon Matrixes
Morphology and Graphitization of the Worn Surface of C/C Composite with Rough Lamination/Smooth Lamination/Resin Carbon as Matrix Precursor
Evaluation of the Flexural Properties of Pineapple Reinforced Polymer Composite for Automotive and Electrical Applications
Simulation Studying on Viscoelasticity and Orthotropic of Composite Materials
The Application of Molecularly Imprinted Polymers to Solid-Phase Extraction
Synthesis and Dispersing Performance of Hyperbranched Dispersant
Non-Isothermal Crystallization Behavior and Kinetics of Compatibilized ß Nucleated Polypropylene/Polystyrene Blends
Effect of Doping Cerium Oxide on Microwave Absorbing Properties of Polyaniline/Al-Alloy Foams Composite Materials
Synthesis and Characterization of Poly(fluorene) with Charged Iridium(III) Complex
Research on Application of Fractal Theory for SiO2/UPR Granular Composites
The Effect of the Die Temperature on the Solidification Behaviour of the Al/SiCp Metal Matrix Composite: A Comparative Study of Experimental and Finite Element Analysis
Research on the Ignition Performances of the Titanium Composite SCB
Effects of Milling Techniques and Calcinations Temperature on the Composite Cathode Powder LSCF-SDC Carbonate
Hybrid Fluorescent-Magnetic Polymeric Particles for Biomedical Applications
Synthesis and Characterization of an Experimental Light-Curing Dental Resinous Monomer
Performance Evaluation of Liquid Nitrogen as Coolant in Turning of Al/SiC Metal Matrix Composites (AMMC)
Chapter 4: Metals and Alloys
Surface Characteristics of Indonesian Cortical Bone Screw
Effect of Strontium on Microstructure and Mechanical Properties of Semi-Solid A356 Al Alloy
Microstructure and Magnetic Properties of Rapidly Solidified Sm(CobalFe0.11Cu0.10Zrx)7 Alloys
Evaluation of Mechanical Properties of Friction Stir Welded Al 6351 Aluminium Alloy with Reinforcement Particles in the Weld Region
Microstructure Evolution of Nickel Aluminum Bronze Alloy during Compression at Elevated Temperatures
Microstructural Evolution in Aluminum Alloy 7050 during Cooling from Homogenization
Effect of the Long Natural Aging on the Precipitation Sequence in Al-Mg-Si Alloy
Determination of Initiation of Dynamic Recrystallization in AISI 4340 Steel
Effect of Strain to the Microstructure and Texture of AZ31 Magnesium Alloy during Compression Deformation at Room Temperature
Study on Electrochemical Noise of N80 Steel in NaCl Solution by Wavelet Analysis and Equivalent Circuit Theory
Corrosion Behavior of Austenitic Stainless Steel in High Sulphate Content
Mechanical Properties and Microstructures of Al-12Zn-2.4Mg-1.2Cu Alloy Extruded Sheet
Effect of Tempering Temperature on Mechanical Properties and Microstructures of 800MPa Microalloy Low Carbon Bainitic Steel
Influences of H2SO4 and NaCl Concentrations on Stress Corrosion Cracking of AISI 304 Stainless Steel
Influence of Thrice-Induction-Heating and Once-Quenching on Fatigue Strength of SAE52100 Steel
The Static Recrystallization Behavior of Fe-Mn-Si-Al Series TWIP Steel
Microstructure and Plastic Deformation Behavior of Modified AA7075-T6 Aluminum Alloy
Wear and Frictional Behaviour of Metals
An Evaluation of the Fire Performance of H-Section Made of Ordinary Strength Structural Steels by Differences of Length
Corrosion Resistance of High-Alloyed Material UNS N08028 in Sodium Chloride Solution
Effect of VC Addition on Microstructure and Mechanical Properties of Ultrafine Grained WC-Co Alloys
A Modified Fictive Stress Model for Zr55Al10Ni5Cu30 Bulk Metallic Glass in Supercooled Liquid Region by Introducing a Time Relaxation Factor
Separation of Trace Heavy Metal Ions from Leaching Liquor of Low-Grade Pyrolusite with Pyrite and H2SO4
Metallic Layer Reflectance Analysis Using Design of Experiment
Chapter 5: Biomaterials
Adhesion of Streptococcus mutans on Different Types of Orthodontic Brackets
The Application of Starch - Sodium Alginate Composite Coating on Transparent Paper for Food Packaging
Scanning Electron Microscopic Studies of Carbonized Rice Husk and Apricot Stone
Significance of PR-1 Proteins in Infected Plants
Investigation on the Dielectric Properties of Pulverized Oil Palm Frond and Pineapple Leaf Fiber for X-Band Microwave Absorber Application
Low Temperature and Copper Induce Viable but Nonculturable State of Salmonella typhi in the Bottled Drinking Water
Biological Effect of Exo-Polysaccharides Produced by Grifola frondosa on Carbon Tetrachloride Induced Liver Injury In Vitro
Application of Membrane Science to Remove Endocrine Disrupting Compounds (EDCs) and Pharmaceutically Active Compounds (PhACs): A Review
Design and Manufacturing Bio Composite (Sugarcane Bagasse – Polyvinyl Acetate) Panel that Characterized Thermal Conductivity
Influences of Different Surface Treatments on Titanium Substrate to HA/TiO2 Bioactive Coatings
Derivatives of Hydantoin: Synthesis and Antiproliferative Activity on HepG2 Cancer Cell Line
Chapter 6: Thin Film and DLC Coating
Structure, Electrical, Optical and Magnetic Properties of Mn-Doped Copper Nitride Thin Films Deposited by Radio Frequency Magnetron Sputtering
Hydrophilic Silica Thin Film Formed Using Dimethyl Silicone Oil and Ozone
Comparison of DLC and N-Doped DLC Synthesized by RF-PECVD
Preparation of Ion Implanted Porous Silica Thin Film
Effect of Annealing on Conductivity Type of Nanocrystalline ZnO Films Fabricated by RF Magnetron Sputtering
Study of Interlayer Element Effect on Properties of AlCrTiSiN Thin Film
High Heat Treatment Analysis on Ba 0.6Sr 0.4TiO3 Thin Films
Transparent Conducting SnO2:Al Films Prepared on a-Al2O3 (0001) by MOCVD
Transparent Conducting Zinc Stannate Films Prepared on a-Al2O3 (0001) by MOCVD
Deposition Time Variation Analysis on Indium Tin Oxide Film
The Anode Oxidation Technics and the Characteristics of the Films of ZL101A Al-Si Alloy
Chapter 7: Building and Road Materials
Research on the Influence of Temperature and Humidity to Asphalt Pavement Seedless Detection Technology
Numerical Simulation of Influence of Aggregate-Mortar Interface on Fracture Toughness of Concrete
Compressive and Tensile Strength of Two-Stage Concrete
Study of the Same Curing Condition of Large Volume Concrete Based on Maturity Methods
Fiber Reinforced Concrete Frame Shaking Table Test
Influence of Superplasticizer and Water Cement Ratio on Rheological Characteristics of Fresh Self-Compacting Concrete
Hysteretic Behavior of Damaged Walls Strengthened by Aramid Fiber Sheet and Additional Reinforcement
Experimental Research on Mechanical Properties of Basalt Fiber Reinforced Reactive Powder Concrete
Load Bearing Capacity Tests of Mechanical Joining on Timber-Concrete Beam
Chapter 8: Manufacturing Technology and Processing
Experimental Research on Cutting Temperature of AISI 1045 in High Speed Milling Process
Effect of Hot Processing Parameters on the Deformation Behavior of Superalloy GH4169
Monitoring Welding Discontinuities with Fuzzy Control Chart
Experimental Study on Enhancement of Steel Mechanical Properties by High Pressure Jet Quenching
The Cutting Residual Stress Included in the Surface Integrity
Influence of the Intermediate Annealing on Deformation Ability of the Cold Rolled Ring
Effect on the Grinding Performance by the Different Elements of the Auxiliary Material
Influence of Minimum Quantity Lubrication on Cutting Force and Tool Wear during Machining of GH4169
Synthesis of Mesoporous Molecular Sieve MCM-41 and its Adsorption Behavior for Rhodamine B
Design of the Face Structure of the Grinding-Driller Based on Deform-3D
Calculation Method for Interference Value in Metal Joining Structure
Simulation of HDIs Behaviors in the Plasma Arc Cold Hearth Melting Process
Fabrication of Polymer Micro-Patterns by Transient Thermolithography with Thickness Control
Chapter 9: Structural Materials and Systems
Numerical Study on Normal Stress Distributions in a Single-Lap Adhesive Joint
Three-Dimensional Non-Linear FE Analysis of Shear Stress Distributions in Adhesively Bonded Joint
Analysis of the Sustainable Construction Concept of the Vernacular Materials
The Mode and Nature Frequency of Pipes Conveying Fluid with Distributed Follower Force on Two-Parameter Foundation
Reinforced Round Timber Joints under Static and Cyclic Loading
Multi-Objective Control Method in Structural Displacement Interval Reliability Based on Epsilon Algorithm
Productivity Analysis of Fractured Well in Tight Oil Reservoir
Research Status and Development Trend of Steel-Bamboo Composite Structure
Research on Diagenesis of Volcanic Reservoirs in YS2,3 Well Fields
Chapter 10: Materials Application
Calculation of Electron State's Change around the Corner of Spin Interference Device in the Semiconductor
Durability and Stability of LSCF Composite Cathode for Intermediate-Low Temperature of Solid Oxide Fuel Cell (IT-LT SOFC): Short Review
Energy Assessment for China Nuclear Waste Based on Energy Harvesting
Study on EMI Reduction of DC-DC Buck Converter
Synthesis and Characterization of a Novel Diphenylamine-Thiophene Compound for Blue Organic Light-Emitting Diodes
The Research and Application Based on Removable High-Precision DC Weak Current Sensor
Evaluation of Performance in Bifacial Solar Cell
Backward-Wave Property in Left-Handed Materials
Environmental and Economic Comparative Analysis between Lithium Ion Battery and NiMH Battery of Electric Vehicle
Output Characteristic Analysis of Partially Shaded Back Surface of Bifacial Photovoltaic Solar Module
Impact of Spectral Irradiance Distribution and Temperature on Concentrator Photovoltaic System
Green Performance Assessment of Power Battery for Electric Vehicle Based on Multi-Objective and Multi-Stage
Research of Epsilon-Negative Material and its Electromagnetic Shielding Effect
Density Functional Theory Study: Interactions of Lithium-Montmorillonite with Poly(Ethylene Oxide) as Preliminary Investigation of Lithium Polymer Conductivity
High-Performance Multilevel-Storage Cu-Doped SiOx-Based Nonvolatile Resistance Memory Using Ion Bombardment Technique
Simulation of Voltage Scaling Aware Mobile Battery Charge Controller Sensor on FPGA
LED Heat Dissipation Analysis Using Composite Based Cylindrical Slug
Effects of Heat Slug Shapes on the Heat Dissipation of High Power LED
High Power LED Heat Dissipation Comparison Analysis via Aluminum and Copper Slug
Study on Duel Photo-Curing Properties of Quaternary Ammonium Salt Ionic Liquid as Photobase Generator
Study on the Properties of W-Al2O3 Solar Energy Selective Absorbing Coating Prepared by Magnetron Sputtering
Study on the Microstructure of Solar Selective Absorbing Coating Prepared by Magnetron Sputtering
Effects of Different Granularity Control Methods on Morphology, Structure and Electrochemical Performance of LiFePO4/C
Lithium Mobility in Lithium-Montmorillonite/Poly(ethylene oxide) Electrolytes: A Molecular Dynamics Simulation Study
