Sonstiges, Englisch, Band Volumes 752-753, 1500 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volumes 752-753, 1500 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03859-220-4
Verlag: Trans Tech Publications
Chapter 1: Metal and Alloy Materials and Technologies;
Chapter 2: Advanced Materials Engineering, Technologies and Applications;
Chapter 3: Material Testing, Analysis and Processing Technology;
Chapter 4: Structural Engineering, Dynamics and Applied Mechanics, Building Materials and Building Management;
Chapter 5: Mechanical Engineering and Design, Manufacturing Technologies;
Chapter 6: Automation, Robotics and Control;
Chapter 7: Measurement, Monitoring and Detection, Identification and Advanced Systems;
Chapter 8: Communication, Graphic and Image Processing, Information Technologies Applications;
Chapter 9: Energy Control and Power Systems, Electrical and Electronic Engineering;
Chapter 10: Disaster Prevention and Mitigation Technology, Environmental Protection and Safety Management;
Chapter 11: Industrial Engineering, Production Quality and Management
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik
- Technische Wissenschaften Energietechnik | Elektrotechnik Energietechnik & Elektrotechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau
- Technische Wissenschaften Bauingenieurwesen Bauingenieurwesen
Weitere Infos & Material
Study of Surface Segregation Defect of 7075 Aluminum Alloy in Semi-Solid Squeeze CastingEffects of Solid Fractions in a Slurry Die Casting Process on Defects of 7075 Aluminum AlloyDeposition and Characterization of CoCrAlY Coatings by Multi-Chamber Detonation SprayerProperties and Peculiarities of WCCoCr Coatings Formed by Multi-Chamber Detonation SprayerCorrosion of Fe-2.25Cr-1.6W-0.1Mo Steels in Na2SO4 Salts at 800 and 900?CCorrosion of T92 Steels in Na2SO4 Salts at 800 and 900?CThe Simulation of the Electrolyte Temperature Effect on the Value Change of the Microhardness of Anodic Alumina Oxide LayersCorrosion of SUS 310 Steels at 600-800?C in N2/H2O/H2S GasesStress Distribution Surrounding Endodontic Prefabricated Parallel PostEffects of Magnesium Content on Ballistic Performance of Al-8Zn-SiC Composite after Heat Treatment ProcessMechanical Response of Aluminium Alloy AA6061 Butt-Welded Joints Subjected to Two Initial Tempers and Different Heat TreatmentsFinite Element Analysis of Stress and Strain Distribution in Gold Thin Film Deposited on Polycarbonate Substrate Subjected to Tension and CoolingImproved Surface Integrity during End Milling AISI 316L Stainless Steel Using Heat Assisted MachiningEffect of Physicochemical Parameters on Methylene Blue Adsorption by Sulfuric Acid Treated Spent Grated CoconutSynthesis and Characterization of Gold Nanoparticles Grafted on Nanoporous Anodic Aluminum Oxide (AAO) MembranePreparation and Characterization of Temperature-Sensitive 2-Hydroxy-3-Allyloxy Propyl Starch EtherChemical Changes of Cement Caused by Aggressive EnvironmentSynthesis and Performances of Crosslinking Polymeric DyesSynthesis of EttringiteComputational Study of Bone Tissue Mechanical Properties Dependence on Nanoscale Morphological CharacteristicsSintering Behavior and Microstructure Character of Magnesia Partially Stabilized Zirconia CeramicsStudy on Microstructural Properties of PAN/MnO2 Nanofibers via Electrospinning MethodStudy about Stress-Strain Properties with Mini Specimen and Microstructure of Nuclear Fuel Element Cladding of Al-Alloy (98% Al + 1% Fe + 1% Ni) after Being Tempered at Temperatures between (100 ? 650) ?CApplication of Finite Element Analysis to the Interface Decohesion of CFRP/SMA CompositeInfluence of Irradiation Doses on Mechanical Properties of Glass Fiber Filled PBTInfluence of Irradiation Doses on Mechanical Properties of PA6Formulation of Nanofiltration Flat Sheet Membrane Using Cellulose from Kenaf CoreMorphology-Controlled CaCO3 Nanostructures by Modified Co-Precipitation in Pulsed ModeFormation of High Aspect Ratio Nanostructures Using Focused Ion Beam Induced Deposition of CarbonImprovement of Surface Properties of Micro-Mold via SAM Coating for Fabrication of Microfluidic DeviceModelling of the Influence of a Pointed Field Emission Cathode Design from the Silicon Carbide with Graphene Film on the Electric Field StrengthAnisotropic Wetting Behavior on Injection Molded Polypropylene Parts Inspired by Surface Structure of MossSynthesis of Superhard Coatings Using Pulsed Beams of High-Energy Gas MoleculesInvestigation of Optimal Silk Film Thickness in Silk Microneedle FabricationStrength Development of Fine Grained Mortar Containing Fly Ash and Rice Husk AshMicrostructural Stability and Creep Behavior of Directionally Solidified MgAl2O4/Y3Al5O12 Eutectic CompositeRutting Performance of Hot Mix Asphalt Mixture Using Nanopolyacrylate Polymer ModifierThe Liquid Condensation Conditions in the Dry Gas Seal SystemEffect of Si on the Thermal Stability of Ferritic Heat-Resistant Ductile IronComplex Formation of Polyacrylic Acid with Surfactants of Different HydrophobicityPolymer-Based Fluidic Devices Integrated with Perforated Conical Nanopores in Freestanding Polymer MembranesLuminescence and Morphology Control of Phosphor Materials Synthesized by Melt Synthesis MethodElectret State in Composite Polymer Materials Based on Low Density Polyethylene and PolypropyleneRemoval of Ammonia Nitrogen from Domestic Wastewater Using Vertical Aerated Limestone FilterMagnetic Condition Flat Core/Shell Nanoparticles?Average Spin? Approximation in the Heisenberg ModelFormation of Tobermorite at Different Materials Composition of Aerated ConcreteMethylene Blue Adsorption onto NaOH Treated Leucaena leucocephala Leaf PowerModified Vermiculites Study by Various Physicochemical MethodsResidual Stress Effects on Fatigue Crack Growth in Directionally Solidified YAG/Spinel EutecticsDesigning of Details Taking into Account Degradation of Structural Ceramics at ExploitationStructural and Optical Analysis of Eu3+ Doped BiVO4 Nanophosphor by Combustion MethodStudy of the pH Effects on the Phosphorus Removal Mechanism in Lab-Scale Electric Arc Furnace Slag and Limestone Filters in Synthetic WastewaterImpact of Electrode Wire Feed Ways on Residual Stresses in Welded JointsExperimental Characterization of Multiaxial Glass Laminates for Front End CabThe Effect of Alkali Silica Gel Formation from Alkali Silica Reaction in Mesoscopic ScaleEffect of Particle Size of Recycled Polyamide 6 to Impact Toughness and HardnessInfluence of Recycled Particle Size to Tensile Properties of Polyamide 6Mechanical Properties of Injection Molded Rubber Testing SamplesUse of Theory of Hypothesis at Evaluation of Creep CurvesIonizing Radiation Effect of PBT Measured by Nano-Indentation TestMicro-Hardness of PA6 Influenced by Beta IrradiationMaterial Properties of PA6/rPA6x BlendRecycling of Radiation Crosslinked Polyamide 6Tensile Behaviour and Temperature Stability of Modified HDPE by Radiation Cross-Linking after Temperature LoadSurface Energy of Selected Polyolefins after Radiation Cross-LinkingThe Basic Mechanisms of Turbine Dummy-Blades Assembly and Dry-Friction Dampers Interaction Experimental InvestigationInfluence of Non-Newtonian Behavior Index on Curing Rate when Injection MoldingInfluence of Content of Crosslinking Agent on the Micromechanical Properties of Glass-Filled Polyamide 6Micromechanical Properties of Surface Layer of Electron Beam Irradiated of Glass-Filled PA6Analysis of Materials Based on Inverse ModelingThermo-Mechanical Properties and Tensile Behaviour of Modified LDPE by Radiation Cross-Linking after Temperature LoadInfluence of Ionizing Beta Radiation on the Surface Energy and Strength of Bonded Joints (at an Elevated Temperature) of Thermoplastic MaterialFE Analysis of the Effect of Material Gradient on the Performance of a Functionally Graded Endodontic Prefabricated Parallel Post
In Vitro Antimicrobial Properties of Propolis against Caries-Associated MicroorganismsThe Evaluation of the Equations of State Used for the Joule-Thomson Effect Analysis in the Dry Gas SealModeling of the 2D Halbach Array with Different Dimensions of Magnets Based on Magnetization DirectionSurface Defects Formation in Grinding of Silicon Nitride CeramicsTest Research on Rubber Powder Asphalt Mixture under the Action of Temperature and Chlorine SaltAn Experimental Testing of Fillet Welded SpecimensDependence of Relaxation Time on the Core Size Two-Phase Nanoparticles Magnetite/TitanomagnetiteEffect of Surface Shape on Light AbsorptionImprovement of Two-by-Four Timber System Stiffness by Using Polyurethane Foam as a Cladding InsulationComparison of Pavement Response Analysis between a 18-Axles Truck and Standard Thai TruckOperational Characteristics of Coin Type Molten Carbonate Fuel Cell Fueled by Ash Free CoalThe Development of Bi-Ag Sandwich Sheets for Fire Assay ApplicationsThe Analysis of Temperature and Strain Rate Influence on Flow Stress of Mg Alloy AZ31Femtosecond Ti:Sa Laser Processing of SilicaExperimental Analysis on Heat Transfer Enhancement of Double Pipe Heat Exchanger Using Alumina/Water Nanofluid and Baffled Twisted Tape InsertsThe Study of Deep-Hole Drilling BTA Drill Whirl Caused by Cutting FluidInvestigation on Mechanical Properties of Natural Fiber Composite Using RTM Manufacturing MethodA Parameter Study for the Test Condition of Kolsky Bar ExperimentSurface Modification of Zirconia (Y-TZP) Ceramics Induced by Pulsed Laser MachiningMicrostructural and Mechanical Properties of Selective Laser Melted Al 4047An Effective Jig for Friction Stir Welding of Pipe Butt JointComputer Aided Analysis and Prototype Testing of Nanocoated Mechanical ComponentsFinite Element Analysis of Residual Stress Level Prediction for TIG Welding ProcessNumerical Simulation for Predicting Fire Behavior of Axially Loaded Circular Concrete Filled Steel Tubular ColumnsStructural Behavior of Reinforced Rubbercrete Beams in ShearMonitoring the Degradation of UHPC BoardsFailure Modes and Acceptance Criteria of Reinforced Prestressed Concrete Railway Sleepers Based on Dynamic Loading TestsBehaviour of Composite Column of Cold-Formed Steel Section without Web Stiffener Integrated with Ferrocement JacketBehaviour of Composite Column of Cold-Formed Steel Section with Web-Stiffener Integrated with Ferrocement JacketFinite Element Modelling of Innovative Precast Cold-Formed Steel Ferrocement as Composite BeamDevelopment of High-Volume High Temperature Fly Ash Concrete (HVFAC)Numerical Models of End-Plate Assembling Bolt Connection of Angle ProfilesConditioned and Orthogonalised Reverse Path Nonlinear Methods on Multi-Degree-of-Freedom SystemResearch of Methods of Accuracy Increase of Building Weld-Fabricated ConstructionsExperimental Test of Reinforcing a Masonry Column with Fiber Reinforced Strain Hardening Cementitious CompositeFRP-Concrete-Steel Double Skin Tubular Cantilever Beams: Behavior under Cyclic LoadingEffect of Inner Steel Tube Cross-Sectional Shape on Compressive Behavior of Square FRP-Concrete-Steel Double-Skin Tubular ColumnsUltrasonic Inspection of Thin Duplex Steel Weld Joints by TOFDInvestigation on the Use of Fly Ash and Residual Rice Husk Ash for Producing Unfired Building BricksThe Method of Separation of Variables in the Problem of Theory of Elasticity for Radially Inhomogeneous CylinderSettlement Researches of Seismically Isolated BuildingsCrack Behaviour of Retrofitted Pre-Tensioned Concrete BeamFlexural Behavior of GFRP RC Beam Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate: Cracking BehaviorApplication of Grid Approximation Method for the Calculation of Monolithic Reinforced Concrete Frame Taking into Account Construction Sequence and Concrete CreepFinite Element Modelling of Reinforced Concrete Slab at Elevated Temperature Using ABAQUSMold Issue in Details within the External Walled StructureAnalysis of Resonant Vibration of Railway VehicleStudy on Wheel-Rail Coupled Vibration of Metro with Co-Simulation of Finite Element Analysis and Multi-Body Dynamics SimulationNumerical-Analytical Solution of Two-Dimensional Problem for Elastic Radially Inhomogeneous Thick-Walled CylinderCalculation and Reliability Assessment of Timber Structure Bolt Connection Subjected to Double Unequal ShearsReliability of Timber Structure Bolt Connection Subjected to Double Unequal ShearsAn Analytical Study on the Performance of Wind Resistant System Considering Climate ChangeWind Tunnel Experiments Focused on the Bridge Deck Stability CoefficientsEffect of Sea Water Submersion on GFRP-S Bonding Capacity of Reinforced Concrete BeamDesign and Analysis of Automobile Bonnet Using Natural Flax Composite StructurePerformance Enhancement of the Existing Bridges due to Overweight Vehicles with Multi-Axle LoadingModeling of Deformation and Fracture of Concrete Structures with FRP ReinforcementIndices for Fast Assessment of Bridge Condition in TaiwanChanges in Floor Impact Sound Insulation Performance with TimeExperimental Investigation of Concrete Confinement with Textile Reinforced ConcreteLoad-Carrying Capacity of Timber Structure Bolt Connection Subjected to Double Unequal ShearsThe Development of Concrete Life Cycle Assessment SystemPenetration Rate of Various Injection Gels in Dependence on Wetness of Building MaterialsSelection of Insulation Materials and Insulation Performance with Consideration of Building Energy when Designing a BuildingInfluence of the Installation Lines to the Acoustic Properties of Dividing WallImprovement of Acoustic Properties and Dynamic Characteristics of Temporary Bridge StructuresStudy on the Vibration Control Based on the Piezoelectric Self-Sensing Vibration DamperAnalysis of Floor Impact Sound Propagation around the Adjacent HousesThe Composite Reinforcement of LLC ?SK?Development of an Environmental Database for Construction Finish Materials Organized by Building ElementShear at the Interface between Composite Parts of Prestressed Concrete SectionStudy on Finite Element Model for Impact Damage of Composite StructureNumerical Analysis and Static Loading Test of Equipment Fixed on the Light-Weight Partition WallReliability of Vibration Transfer Path SystemsThe Effects of Water Saturation on Dynamic Mechanical Properties in Red and Buff Sandstones Having Different Porosities Studied with Split Hopkinson Pressure Bar (SHPB)The Effects of Reservoir Area Extent on the Performance of a Vertical Well in a Reservoir Subject to Bottom Water DriveAnalysis of the Airborne Sound Insulation Performance of Floor Structures Based on the Intensity MethodCharacteristic Evaluation of Impact Sound Reduction by Floor Coverings Using Floor Impact Sound in a Test BuildingAnalytical Homogenization for In-Plane Shear and Torsion of Honeycomb Sandwich Plates with Skin and Height EffectsStudy on the Cooling System of the Electronic Equipment in the Cabin of the Stratospheric AirshipOptimization of Plate Heat Exchangers with Intermittent RidgesThe Design and Research of Automatic Micro-Pressure Relief Valves Used in Mine Rescue CabinAn Innovative Method of Harnessing Hydraulic Energy for Mini Cost-Saving Water Treatment Plant Using Hydraulic Turbine: A Mathematical Approach towards Design and AnalysisInvestigation of Sensitivity Effect Based on Mass and Stiffness Modification in Automobile CrankshaftCooling Rate Analysis?of Thin Wall Ductile Iron Using Microstructure Examination and Computer SimulationThe Effects of Fluid Structure Interactions on the Dynamic Characteristics of the Reactor Internals Structure of SMARTFinite Element Analysis of Automobile Suspension Control ArmTechnological and Operational Aspects of Integrated Bladed Rotors ManufactureTechnology for Hydrothermal Destruction of Organic Fuel MaterialsTechnological Limitations of Selective Laser Melting MethodResults of the Study Rotor Wheels Supersonic Microturbines with a Large Angle of Rotation of the FlowHeuristics for an m-Machine Re-Entrant Permutation Flowshop with the Objective of Total TardinessEffect of Oil Flow Velocity on Hydraulic ShockCFD Analysis for the Turbulent Flow Distribution in a Fuel Assembly with the Split-Type Mixing Vanes by Using the Advanced Scale-Resolving Turbulence ModelsVisualized Flow Structure inside an Odor-Removing Basin System with Multi-Stacked Porous BafflesDynamic Characteristics Research of Magneto-Rheological Fluid Engine MountTwin Shaft Rotor System Vibration Damping Experimental InvestigationNumerical Analysis of Swirl Chamber Combustion System in DI Diesel Engines with the Conical-SprayAir-Fuel Ozonation System for a Combustion Engine Addressing an Environmental TargetStructural Modification Strategies to Improve Piezoelectric Energy Harvester PerformanceImproving the Efficiency of Power Generation Plants Based on Internal Combustion EnginesVerification of External Gas-Assisted Mold Temperature Control for Injection Molding ProcessEnsuring Maximum Stability Degree in the Systems with Interval ParametersEmbedded Wireless Automatically Watering Plants Using UAVPath Control for a Manipulator while Tracking a Given TrajectoryKinematic Optimization of Parallel Manipulators with a Desired WorkspaceDiagnostics of Resistance Coefficients and Cavitation of Flow Control ValveThe Extension of Battery Lives Used in a Solar Irrigation System with Regards to Charge-Discharge NumbersEnhancement the Maneuverability of Tele-Hydraulic System Using Fuzzy Friction CompensatorThe Design of Pneumatic Visual Servo Positioning SystemAutomated Car Parking Authentication System Using NFC and Public Key Cryptography Based on Android PhoneLow Cost Mobile Robot Kits Design as a Teaching Tool for Education and ResearchDevelopment of Foot Modules of an Exoskeleton Equipped with Multiple Sensors for Detecting Walking Phase and IntentDevelopment of Exoskeleton 4-Bar Linkage Gripper for Front End Module (FEM) Assembly ProcessA Study on Structural System Identification and Damage Detection for Free Vibration Response Using the Wavelet TransformAnalysis of Ground Massif Temperatures with Slinky Horizontal Heat ExchangerReliability of Identification Based on Fingerprints in Dual Biometric Identification SystemsWeld Detect Identification Using Texture Features and Dynamic Time WarpingA Co-Simulation Analysis of Hydraulic Pitch Control System in Large Wind TurbineA Design and Implementation of Attendance System Using Smallest Wireless Fingerprint with Arduino Y?n Embedded BoardHome Patient Sensor and Monitor System Using IPhoneEmployee Attendance Checker in Manufacturing Using Barcode and Mobile with Embedded CameraHC2D Barcode for Handwritings Verification Using Embedded Camera on TabletDesign and Analysis of the Oxygen Regulator in the Aircraft3D Mosaic from ImagesObject Movement Computation from Two ImagesThe Pattern Based Visual Property Specification Language and Supporting System for Software VerificationsEffective Extraction of State Invariant for Software VerificationManagement of Eastern Farmers Association Community Radio and Ban Huakrok Community Radio, Chon Buri ProvinceHybrid Distributed Correlation Noise Model and Parameter EstimationRaising Energy Awareness through 3D Computer AnimationPrediction of Indoor Millimeter Wave Propagation Characteristics Based on BP Neural NetworkAn Outage of Overhead and Underground Distribution Network Evaluation AssessmentThe Measurement of the Voltage Distribution along High Voltage Suspension Porcelain (5-6-7 Insulator)/String in Case of Clean ConditionResearch and Establishment of UHV AC Transmission ModelReliability Evaluation of Optical Fiber Protection Channels Based on Practical Coding and Logical CalculationThermodynamic Approach for Identifying Oxidative Processes Insulation BreakdownPerformance Verification of Power Quality Signals Classification SystemComparison of Open and Short-Circuit Switches Faults Voltage Source Inverter (VSI) Analysis Using Time-Frequency DistributionsTransient Instantaneous Voltage Sag of Distributed Generation Bus in Muangxay Substation, Oudomxay Province, LaosExperimental Comparison between CAV Control and CO2 Ventilation Control Approaches with Respect to Energy Saving of Air ConditionerLong Term Accumulation Storages and their StructureExperimental Measurement of the CO2 Content in a Passive Home during a Simulated Air-Conditioning Power OutageThe Designing of Data Acquisition Card through PIC18F4550 and an Interface StudyAnalyse of Agricultural Soil Heavy Metals PollutionInvestigation and Analysis of International Roughness Index at National Freeway in TaiwanCO2-Brine Displacement in Geological CO2 Sequestration: Microfluidic Flow Model StudyProject Acquaponia - Designing Sustainable Equipment for Treating Gray School Waters for Irrigation and Food GrowingRevisiting the Reliability Assessment of Frame Constructions of Industrial BuildingAnalysis on Current State on Safety Education of Korean Construction Sites in OverseasStudy on Spending for Safety Management Cost in Korean Construction SitesA Comparative Study on the Noise between Floors of Apartment and Multiplex HousingThe Experimental Research on Horizontal Underground Tank Magnetic Flux Leakage TestingA Safety Management Method Based on Job Stress Analysis for Foreign Construction Laborers in KoreaA Method of Section Replacement for Pile-Bent Pier RehabilitationRFID Tag Anti-Collision Security Study and EvaluationInfluence of Connection Lane on the Left of Running Lane on Intersection in Ostrava-PetrkoviceAnalysis of Baffle Effect for Measuring Transmission LossSimulation of Tsunami Wave Generated by Submarine Slide: Generation, Propagation, Run-Up and ImpactSimulating Migration Properties of Aquifer Disposal of CO2 in Western Taiwan BasinProduct Knowledge and Lifecycle Management in Project-Based ManufacturingHow to Save Energy in Thailand Industrial ManufacturingThe Problem of Organization and Industry after Using ERPA Security of Circular Email in ManufacturingModeling Design and Rapid Prototyping Manufacture of Cream Bottle Based on Handheld Laser ScanningModeling Design of Plastic Bottles Based on Laser Scanner and Rapid Prototyping TechnologyKeys for Redesign Industrial Facilities in a Current Productive EnvironmentStudy for Development Directions and Real Application Cases of Korea Production System (KPS)Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing ManagementQuality Assurance of CIPP Liners According EN ISO 11296-4Performance Evaluation of Real Power Quality Disturbances Analysis Using S-TransformModular Service-Oriented Cyber-Physical Systems for the European Tool Making IndustryData Preprocessor for Order Preserving EncryptionDevelopment of a Knowledge Management System for the Basic Hand Tools and Machinery Using Ontology TechnologyMobile Factory Network (MFN) ? Network of Flexible and Agile Manufacturing Systems in the Construction IndustryThe Combination Method for the Service Parameters of Product-Service SystemsCharacterization of Multiple Functional Solid Line of Graphite Ink Surface Printed by Micro-FlexographicResearch on Strategic Supplier Selection and Evaluation Method of Manufacturing Enterprise Based on AHP-GCA MethodResearch on Strategic Supplier Selection and Evaluation Standard System of Manufacturing EnterpriseDesign and Rapid Prototyping of S-Shape Push-Ups Frame Based on Laser ScanningThree Dimensional Detection of the via in the PCB CT Image Using Morphology OperationAn Energy Aware Routing Algorithm for WSNs Based on Semi-Static ClusteringTraffic Simulation at Intersections with Cranked PriorityApplication of Neural Networks in Perishable Inventories ManagementAnalysis of Research Trends in Water Resource Management Using Network AnalysisDrinking Water Production Using Passive Solar Stills with Different Absorbing Materials
