Selected, peer reviewed papers from the International Conference on Advanced Engineering and Technology (ICAET 2014), December 19-21, 2014, Incheon, South Korea
Buch, Englisch, 1500 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2800 g
ISBN: 978-3-03835-442-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
- Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik
- Technische Wissenschaften Energietechnik | Elektrotechnik Energietechnik & Elektrotechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Bauingenieurwesen Bauingenieurwesen
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau
Weitere Infos & Material
Preface and Committee
Chapter 1: Metal and Alloy Materials and Technologies
Study of Surface Segregation Defect of 7075 Aluminum Alloy in Semi-Solid Squeeze Casting
Effects of Solid Fractions in a Slurry Die Casting Process on Defects of 7075 Aluminum Alloy
Deposition and Characterization of CoCrAlY Coatings by Multi-Chamber Detonation Sprayer
Properties and Peculiarities of WCCoCr Coatings Formed by Multi-Chamber Detonation Sprayer
Corrosion of Fe-2.25Cr-1.6W-0.1Mo Steels in Na2SO4 Salts at 800 and 900°C
Corrosion of T92 Steels in Na2SO4 Salts at 800 and 900°C
The Simulation of the Electrolyte Temperature Effect on the Value Change of the Microhardness of Anodic Alumina Oxide Layers
Corrosion of SUS 310 Steels at 600-800°C in N2/H2O/H2S Gases
Stress Distribution Surrounding Endodontic Prefabricated Parallel Post
Effects of Magnesium Content on Ballistic Performance of Al-8Zn-SiC Composite after Heat Treatment Process
Mechanical Response of Aluminium Alloy AA6061 Butt-Welded Joints Subjected to Two Initial Tempers and Different Heat Treatments
Finite Element Analysis of Stress and Strain Distribution in Gold Thin Film Deposited on Polycarbonate Substrate Subjected to Tension and Cooling
Improved Surface Integrity during End Milling AISI 316L Stainless Steel Using Heat Assisted Machining
Chapter 2: Advanced Materials Engineering, Technologies and Applications
Effect of Physicochemical Parameters on Methylene Blue Adsorption by Sulfuric Acid Treated Spent Grated Coconut
Synthesis and Characterization of Gold Nanoparticles Grafted on Nanoporous Anodic Aluminum Oxide (AAO) Membrane
Preparation and Characterization of Temperature-Sensitive 2-Hydroxy-3-Allyloxy Propyl Starch Ether
Chemical Changes of Cement Caused by Aggressive Environment
Synthesis and Performances of Crosslinking Polymeric Dyes
Synthesis of Ettringite
Computational Study of Bone Tissue Mechanical Properties Dependence on Nanoscale Morphological Characteristics
Sintering Behavior and Microstructure Character of Magnesia Partially Stabilized Zirconia Ceramics
Study on Microstructural Properties of PAN/MnO2 Nanofibers via Electrospinning Method
Study about Stress-Strain Properties with Mini Specimen and Microstructure of Nuclear Fuel Element Cladding of Al-Alloy (98% Al + 1% Fe + 1% Ni) after Being Tempered at Temperatures between (100 – 650) °C
Application of Finite Element Analysis to the Interface Decohesion of CFRP/SMA Composite
Influence of Irradiation Doses on Mechanical Properties of Glass Fiber Filled PBT
Influence of Irradiation Doses on Mechanical Properties of PA6
Formulation of Nanofiltration Flat Sheet Membrane Using Cellulose from Kenaf Core
Morphology-Controlled CaCO3 Nanostructures by Modified Co-Precipitation in Pulsed Mode
Formation of High Aspect Ratio Nanostructures Using Focused Ion Beam Induced Deposition of Carbon
Improvement of Surface Properties of Micro-Mold via SAM Coating for Fabrication of Microfluidic Device
Modelling of the Influence of a Pointed Field Emission Cathode Design from the Silicon Carbide with Graphene Film on the Electric Field Strength
Anisotropic Wetting Behavior on Injection Molded Polypropylene Parts Inspired by Surface Structure of Moss
Synthesis of Superhard Coatings Using Pulsed Beams of High-Energy Gas Molecules
Investigation of Optimal Silk Film Thickness in Silk Microneedle Fabrication
Strength Development of Fine Grained Mortar Containing Fly Ash and Rice Husk Ash
Microstructural Stability and Creep Behavior of Directionally Solidified MgAl2O4/Y3Al5O12 Eutectic Composite
Rutting Performance of Hot Mix Asphalt Mixture Using Nanopolyacrylate Polymer Modifier
The Liquid Condensation Conditions in the Dry Gas Seal System
Effect of Si on the Thermal Stability of Ferritic Heat-Resistant Ductile Iron
Complex Formation of Polyacrylic Acid with Surfactants of Different Hydrophobicity
Polymer-Based Fluidic Devices Integrated with Perforated Conical Nanopores in Freestanding Polymer Membranes
Luminescence and Morphology Control of Phosphor Materials Synthesized by Melt Synthesis Method
Electret State in Composite Polymer Materials Based on Low Density Polyethylene and Polypropylene
Removal of Ammonia Nitrogen from Domestic Wastewater Using Vertical Aerated Limestone Filter
Magnetic Condition Flat Core/Shell Nanoparticles
“Average Spin” Approximation in the Heisenberg Model
Formation of Tobermorite at Different Materials Composition of Aerated Concrete
Methylene Blue Adsorption onto NaOH Treated Leucaena leucocephala Leaf Power
Modified Vermiculites Study by Various Physicochemical Methods
Residual Stress Effects on Fatigue Crack Growth in Directionally Solidified YAG/Spinel Eutectics
Designing of Details Taking into Account Degradation of Structural Ceramics at Exploitation
Structural and Optical Analysis of Eu3+ Doped BiVO4 Nanophosphor by Combustion Method
Study of the pH Effects on the Phosphorus Removal Mechanism in Lab-Scale Electric Arc Furnace Slag and Limestone Filters in Synthetic Wastewater
Chapter 3: Material Testing, Analysis and Processing Technology
Impact of Electrode Wire Feed Ways on Residual Stresses in Welded Joints
Experimental Characterization of Multiaxial Glass Laminates for Front End Cab
The Effect of Alkali Silica Gel Formation from Alkali Silica Reaction in Mesoscopic Scale
Effect of Particle Size of Recycled Polyamide 6 to Impact Toughness and Hardness
Influence of Recycled Particle Size to Tensile Properties of Polyamide 6
Mechanical Properties of Injection Molded Rubber Testing Samples
Use of Theory of Hypothesis at Evaluation of Creep Curves
Ionizing Radiation Effect of PBT Measured by Nano-Indentation Test
Micro-Hardness of PA6 Influenced by Beta Irradiation
Material Properties of PA6/rPA6x Blend
Recycling of Radiation Crosslinked Polyamide 6
Tensile Behaviour and Temperature Stability of Modified HDPE by Radiation Cross-Linking after Temperature Load
Surface Energy of Selected Polyolefins after Radiation Cross-Linking
The Basic Mechanisms of Turbine Dummy-Blades Assembly and Dry-Friction Dampers Interaction Experimental Investigation
Influence of Non-Newtonian Behavior Index on Curing Rate when Injection Molding
Influence of Content of Crosslinking Agent on the Micromechanical Properties of Glass-Filled Polyamide 6
Micromechanical Properties of Surface Layer of Electron Beam Irradiated of Glass-Filled PA6
Analysis of Materials Based on Inverse Modeling
Thermo-Mechanical Properties and Tensile Behaviour of Modified LDPE by Radiation Cross-Linking after Temperature Load
Influence of Ionizing Beta Radiation on the Surface Energy and Strength of Bonded Joints (at an Elevated Temperature) of Thermoplastic Material
FE Analysis of the Effect of Material Gradient on the Performance of a Functionally Graded Endodontic Prefabricated Parallel Post
In Vitro Antimicrobial Properties of Propolis against Caries-Associated Microorganisms
The Evaluation of the Equations of State Used for the Joule-Thomson Effect Analysis in the Dry Gas Seal
Modeling of the 2D Halbach Array with Different Dimensions of Magnets Based on Magnetization Direction
Surface Defects Formation in Grinding of Silicon Nitride Ceramics
Test Research on Rubber Powder Asphalt Mixture under the Action of Temperature and Chlorine Salt
An Experimental Testing of Fillet Welded Specimens
Dependence of Relaxation Time on the Core Size Two-Phase Nanoparticles Magnetite/Titanomagnetite
Effect of Surface Shape on Light Absorption
Improvement of Two-by-Four Timber System Stiffness by Using Polyurethane Foam as a Cladding Insulation
Comparison of Pavement Response Analysis between a 18-Axles Truck and Standard Thai Truck
Operational Characteristics of Coin Type Molten Carbonate Fuel Cell Fueled by Ash Free Coal
The Development of Bi-Ag Sandwich Sheets for Fire Assay Applications
The Analysis of Temperature and Strain Rate Influence on Flow Stress of Mg Alloy AZ31
Femtosecond Ti:Sa Laser Processing of Silica
Experimental Analysis on Heat Transfer Enhancement of Double Pipe Heat Exchanger Using Alumina/Water Nanofluid and Baffled Twisted Tape Inserts
The Study of Deep-Hole Drilling BTA Drill Whirl Caused by Cutting Fluid
Investigation on Mechanical Properties of Natural Fiber Composite Using RTM Manufacturing Method
A Parameter Study for the Test Condition of Kolsky Bar Experiment
Surface Modification of Zirconia (Y-TZP) Ceramics Induced by Pulsed Laser Machining
Microstructural and Mechanical Properties of Selective Laser Melted Al 4047
An Effective Jig for Friction Stir Welding of Pipe Butt Joint
Computer Aided Analysis and Prototype Testing of Nanocoated Mechanical Components
Finite Element Analysis of Residual Stress Level Prediction for TIG Welding Process
Chapter 4: Structural Engineering, Dynamics and Applied Mechanics, Building Materials and Building Management
Numerical Simulation for Predicting Fire Behavior of Axially Loaded Circular Concrete Filled Steel Tubular Columns
Structural Behavior of Reinforced Rubbercrete Beams in Shear
Monitoring the Degradation of UHPC Boards
Failure Modes and Acceptance Criteria of Reinforced Prestressed Concrete Railway Sleepers Based on Dynamic Loading Tests
Behaviour of Composite Column of Cold-Formed Steel Section without Web Stiffener Integrated with Ferrocement Jacket
Behaviour of Composite Column of Cold-Formed Steel Section with Web-Stiffener Integrated with Ferrocement Jacket
Finite Element Modelling of Innovative Precast Cold-Formed Steel Ferrocement as Composite Beam
Development of High-Volume High Temperature Fly Ash Concrete (HVFAC)
Numerical Models of End-Plate Assembling Bolt Connection of Angle Profiles
Conditioned and Orthogonalised Reverse Path Nonlinear Methods on Multi-Degree-of-Freedom System
Research of Methods of Accuracy Increase of Building Weld-Fabricated Constructions
Experimental Test of Reinforcing a Masonry Column with Fiber Reinforced Strain Hardening Cementitious Composite
FRP-Concrete-Steel Double Skin Tubular Cantilever Beams: Behavior under Cyclic Loading
Effect of Inner Steel Tube Cross-Sectional Shape on Compressive Behavior of Square FRP-Concrete-Steel Double-Skin Tubular Columns
Ultrasonic Inspection of Thin Duplex Steel Weld Joints by TOFD
Investigation on the Use of Fly Ash and Residual Rice Husk Ash for Producing Unfired Building Bricks
The Method of Separation of Variables in the Problem of Theory of Elasticity for Radially Inhomogeneous Cylinder
Settlement Researches of Seismically Isolated Buildings
Crack Behaviour of Retrofitted Pre-Tensioned Concrete Beam
Flexural Behavior of GFRP RC Beam Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate: Cracking Behavior
Application of Grid Approximation Method for the Calculation of Monolithic Reinforced Concrete Frame Taking into Account Construction Sequence and Concrete Creep
Finite Element Modelling of Reinforced Concrete Slab at Elevated Temperature Using ABAQUS
Mold Issue in Details within the External Walled Structure
Analysis of Resonant Vibration of Railway Vehicle
Study on Wheel-Rail Coupled Vibration of Metro with Co-Simulation of Finite Element Analysis and Multi-Body Dynamics Simulation
Numerical-Analytical Solution of Two-Dimensional Problem for Elastic Radially Inhomogeneous Thick-Walled Cylinder
Calculation and Reliability Assessment of Timber Structure Bolt Connection Subjected to Double Unequal Shears
Reliability of Timber Structure Bolt Connection Subjected to Double Unequal Shears
An Analytical Study on the Performance of Wind Resistant System Considering Climate Change
Wind Tunnel Experiments Focused on the Bridge Deck Stability Coefficients
Effect of Sea Water Submersion on GFRP-S Bonding Capacity of Reinforced Concrete Beam
Design and Analysis of Automobile Bonnet Using Natural Flax Composite Structure
Performance Enhancement of the Existing Bridges due to Overweight Vehicles with Multi-Axle Loading
Modeling of Deformation and Fracture of Concrete Structures with FRP Reinforcement
Indices for Fast Assessment of Bridge Condition in Taiwan
Changes in Floor Impact Sound Insulation Performance with Time
Experimental Investigation of Concrete Confinement with Textile Reinforced Concrete
Load-Carrying Capacity of Timber Structure Bolt Connection Subjected to Double Unequal Shears
The Development of Concrete Life Cycle Assessment System
Penetration Rate of Various Injection Gels in Dependence on Wetness of Building Materials
Selection of Insulation Materials and Insulation Performance with Consideration of Building Energy when Designing a Building
Influence of the Installation Lines to the Acoustic Properties of Dividing Wall
Improvement of Acoustic Properties and Dynamic Characteristics of Temporary Bridge Structures
Study on the Vibration Control Based on the Piezoelectric Self-Sensing Vibration Damper
Analysis of Floor Impact Sound Propagation around the Adjacent Houses
The Composite Reinforcement of LLC 'SK'
Development of an Environmental Database for Construction Finish Materials Organized by Building Element
Shear at the Interface between Composite Parts of Prestressed Concrete Section
Study on Finite Element Model for Impact Damage of Composite Structure
Numerical Analysis and Static Loading Test of Equipment Fixed on the Light-Weight Partition Wall
Reliability of Vibration Transfer Path Systems
The Effects of Water Saturation on Dynamic Mechanical Properties in Red and Buff Sandstones Having Different Porosities Studied with Split Hopkinson Pressure Bar (SHPB)
The Effects of Reservoir Area Extent on the Performance of a Vertical Well in a Reservoir Subject to Bottom Water Drive
Analysis of the Airborne Sound Insulation Performance of Floor Structures Based on the Intensity Method
Characteristic Evaluation of Impact Sound Reduction by Floor Coverings Using Floor Impact Sound in a Test Building
Analytical Homogenization for In-Plane Shear and Torsion of Honeycomb Sandwich Plates with Skin and Height Effects
Chapter 5: Mechanical Engineering and Design, Manufacturing Technologies
Study on the Cooling System of the Electronic Equipment in the Cabin of the Stratospheric Airship
Optimization of Plate Heat Exchangers with Intermittent Ridges
The Design and Research of Automatic Micro-Pressure Relief Valves Used in Mine Rescue Cabin
An Innovative Method of Harnessing Hydraulic Energy for Mini Cost-Saving Water Treatment Plant Using Hydraulic Turbine: A Mathematical Approach towards Design and Analysis
Investigation of Sensitivity Effect Based on Mass and Stiffness Modification in Automobile Crankshaft
Cooling Rate Analysis of Thin Wall Ductile Iron Using Microstructure Examination and Computer Simulation
The Effects of Fluid Structure Interactions on the Dynamic Characteristics of the Reactor Internals Structure of SMART
Finite Element Analysis of Automobile Suspension Control Arm
Technological and Operational Aspects of Integrated Bladed Rotors Manufacture
Technology for Hydrothermal Destruction of Organic Fuel Materials
Technological Limitations of Selective Laser Melting Method
Results of the Study Rotor Wheels Supersonic Microturbines with a Large Angle of Rotation of the Flow
Heuristics for an m-Machine Re-Entrant Permutation Flowshop with the Objective of Total Tardiness
Effect of Oil Flow Velocity on Hydraulic Shock
CFD Analysis for the Turbulent Flow Distribution in a Fuel Assembly with the Split-Type Mixing Vanes by Using the Advanced Scale-Resolving Turbulence Models
Visualized Flow Structure inside an Odor-Removing Basin System with Multi-Stacked Porous Baffles
Dynamic Characteristics Research of Magneto-Rheological Fluid Engine Mount
Twin Shaft Rotor System Vibration Damping Experimental Investigation
Numerical Analysis of Swirl Chamber Combustion System in DI Diesel Engines with the Conical-Spray
Air-Fuel Ozonation System for a Combustion Engine Addressing an Environmental Target
Structural Modification Strategies to Improve Piezoelectric Energy Harvester Performance
Improving the Efficiency of Power Generation Plants Based on Internal Combustion Engines
Chapter 6: Automation, Robotics and Control
Verification of External Gas-Assisted Mold Temperature Control for Injection Molding Process
Ensuring Maximum Stability Degree in the Systems with Interval Parameters
Embedded Wireless Automatically Watering Plants Using UAV
Path Control for a Manipulator while Tracking a Given Trajectory
Kinematic Optimization of Parallel Manipulators with a Desired Workspace
Diagnostics of Resistance Coefficients and Cavitation of Flow Control Valve
The Extension of Battery Lives Used in a Solar Irrigation System with Regards to Charge-Discharge Numbers
Enhancement the Maneuverability of Tele-Hydraulic System Using Fuzzy Friction Compensator
The Design of Pneumatic Visual Servo Positioning System
Automated Car Parking Authentication System Using NFC and Public Key Cryptography Based on Android Phone
Low Cost Mobile Robot Kits Design as a Teaching Tool for Education and Research
Development of Foot Modules of an Exoskeleton Equipped with Multiple Sensors for Detecting Walking Phase and Intent
Development of Exoskeleton 4-Bar Linkage Gripper for Front End Module (FEM) Assembly Process
Chapter 7: Measurement, Monitoring and Detection, Identification and Advanced Systems
A Study on Structural System Identification and Damage Detection for Free Vibration Response Using the Wavelet Transform
Analysis of Ground Massif Temperatures with Slinky Horizontal Heat Exchanger
Reliability of Identification Based on Fingerprints in Dual Biometric Identification Systems
Weld Detect Identification Using Texture Features and Dynamic Time Warping
A Co-Simulation Analysis of Hydraulic Pitch Control System in Large Wind Turbine
A Design and Implementation of Attendance System Using Smallest Wireless Fingerprint with Arduino Yún Embedded Board
Home Patient Sensor and Monitor System Using IPhone
Employee Attendance Checker in Manufacturing Using Barcode and Mobile with Embedded Camera
HC2D Barcode for Handwritings Verification Using Embedded Camera on Tablet
Design and Analysis of the Oxygen Regulator in the Aircraft
Chapter 8: Communication, Graphic and Image Processing, Information Technologies Applications
3D Mosaic from Images
Object Movement Computation from Two Images
The Pattern Based Visual Property Specification Language and Supporting System for Software Verifications
Effective Extraction of State Invariant for Software Verification
Management of Eastern Farmers Association Community Radio and Ban Huakrok Community Radio, Chon Buri Province
Hybrid Distributed Correlation Noise Model and Parameter Estimation
Raising Energy Awareness through 3D Computer Animation
Prediction of Indoor Millimeter Wave Propagation Characteristics Based on BP Neural Network
Chapter 9: Energy Control and Power Systems, Electrical and Electronic Engineering
An Outage of Overhead and Underground Distribution Network Evaluation Assessment
The Measurement of the Voltage Distribution along High Voltage Suspension Porcelain (5-6-7 Insulator)/String in Case of Clean Condition
Research and Establishment of UHV AC Transmission Model
Reliability Evaluation of Optical Fiber Protection Channels Based on Practical Coding and Logical Calculation
Thermodynamic Approach for Identifying Oxidative Processes Insulation Breakdown
Performance Verification of Power Quality Signals Classification System
Comparison of Open and Short-Circuit Switches Faults Voltage Source Inverter (VSI) Analysis Using Time-Frequency Distributions
Transient Instantaneous Voltage Sag of Distributed Generation Bus in Muangxay Substation, Oudomxay Province, Laos
Experimental Comparison between CAV Control and CO2 Ventilation Control Approaches with Respect to Energy Saving of Air Conditioner
Long Term Accumulation Storages and their Structure
Experimental Measurement of the CO2 Content in a Passive Home during a Simulated Air-Conditioning Power Outage
The Designing of Data Acquisition Card through PIC18F4550 and an Interface Study
Chapter 10: Disaster Prevention and Mitigation Technology, Environmental Protection and Safety Management
Analyse of Agricultural Soil Heavy Metals Pollution
Investigation and Analysis of International Roughness Index at National Freeway in Taiwan
CO2-Brine Displacement in Geological CO2 Sequestration: Microfluidic Flow Model Study
Project Acquaponia - Designing Sustainable Equipment for Treating Gray School Waters for Irrigation and Food Growing
Revisiting the Reliability Assessment of Frame Constructions of Industrial Building
Analysis on Current State on Safety Education of Korean Construction Sites in Overseas
Study on Spending for Safety Management Cost in Korean Construction Sites
A Comparative Study on the Noise between Floors of Apartment and Multiplex Housing
The Experimental Research on Horizontal Underground Tank Magnetic Flux Leakage Testing
A Safety Management Method Based on Job Stress Analysis for Foreign Construction Laborers in Korea
A Method of Section Replacement for Pile-Bent Pier Rehabilitation
RFID Tag Anti-Collision Security Study and Evaluation
Influence of Connection Lane on the Left of Running Lane on Intersection in Ostrava-Petrkovice
Analysis of Baffle Effect for Measuring Transmission Loss
Simulation of Tsunami Wave Generated by Submarine Slide: Generation, Propagation, Run-Up and Impact
Simulating Migration Properties of Aquifer Disposal of CO2 in Western Taiwan Basin
Chapter 11: Industrial Engineering, Production Quality and Management
Product Knowledge and Lifecycle Management in Project-Based Manufacturing
How to Save Energy in Thailand Industrial Manufacturing
The Problem of Organization and Industry after Using ERP
A Security of Circular Email in Manufacturing
Modeling Design and Rapid Prototyping Manufacture of Cream Bottle Based on Handheld Laser Scanning
Modeling Design of Plastic Bottles Based on Laser Scanner and Rapid Prototyping Technology
Keys for Redesign Industrial Facilities in a Current Productive Environment
Study for Development Directions and Real Application Cases of Korea Production System (KPS)
Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing Management
Quality Assurance of CIPP Liners According EN ISO 11296-4
Performance Evaluation of Real Power Quality Disturbances Analysis Using S-Transform
Modular Service-Oriented Cyber-Physical Systems for the European Tool Making Industry
Data Preprocessor for Order Preserving Encryption
Development of a Knowledge Management System for the Basic Hand Tools and Machinery Using Ontology Technology
Mobile Factory Network (MFN) – Network of Flexible and Agile Manufacturing Systems in the Construction Industry
The Combination Method for the Service Parameters of Product-Service Systems
Characterization of Multiple Functional Solid Line of Graphite Ink Surface Printed by Micro-Flexographic
Research on Strategic Supplier Selection and Evaluation Method of Manufacturing Enterprise Based on AHP-GCA Method
Research on Strategic Supplier Selection and Evaluation Standard System of Manufacturing Enterprise
Design and Rapid Prototyping of S-Shape Push-Ups Frame Based on Laser Scanning
Three Dimensional Detection of the via in the PCB CT Image Using Morphology Operation
An Energy Aware Routing Algorithm for WSNs Based on Semi-Static Clustering
Traffic Simulation at Intersections with Cranked Priority
Application of Neural Networks in Perishable Inventories Management
Analysis of Research Trends in Water Resource Management Using Network Analysis
Drinking Water Production Using Passive Solar Stills with Different Absorbing Materials
