Sonstiges, Englisch, 1220 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1220 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-0357-1961-1
Verlag: Trans Tech Publications
This collection offers materials researchers and end-users a wealth of new knowledge encompassing the whole spectrum of ecology, eco-materials, nano-materials, bio-materials, recycling, environmental protection and materials related to energy conversion.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Fabrication of Photocatalytic TiO2 Thin Film Using Innovative Aerosol Deposition MethodTitanium Oxide-Based Photocatalysts: -From Fundamentals to Practical Applications-Design of Efficient TiO2/SiC Photocatalysts from TiC-SiC Nano Particles for Degradation of Organic Pollutants Diluted in WaterBioactivity of Plasma-Sprayed TiO2 Coating in Simulated Body Fluid by Hydrofluoric Acid TreatmentNitride Formation on Titanium under Irradiation of Intense Pulsed Ion BeamVOC Decomposition by Photocatalytic Wall PaperPhoto-Decomposition Property of Thermal Sprayed TiO2 CoatingsHydrogen Production by Catalytic Decomposition of Methane over Carbon NanofibersPhotocatalytic Oxidation and Decomposition of Acetic Acid over TiO2, TS-1 and Ti-MCM-41 CatalystsImpact Evaluation to Human Body Skin of Titania Photocatalyst Fine ParticlesA Novel Formulation for the Modification of Transition Metal Oxide Surfaces for Antifogging Optical ApplicationDispersion Stability of TiO2 Powder Synthesized by Homogeneous Precipitation Process at Low TemperaturesThe Electrochemical Properties of Poly(acrylonitrile) Polymer Electrolyte for Li/S BatteryCorrelation of Superhydrophilicity and Photocatalytic Activity in the TiO2-Based Porous Thin FilmsPhotocatalytic Properties of Mesoporous TiO2 Films Derived from Evaporation-Induced Self-Assembly MethodInfluence of Deposition Parameters on Adhesion/Cohesion of Plasma Sprayed TiO2 CoatingsA Comparison of Different Preparation Methods of Fe-Mo-Mg-O Catalyst for the Large-Scale Synthesis of Carbon NanotubesPhotocatalytic Characterization of Plasma Sprayed TiO2 Coating in Environmental Engineering ApplicationMicrostructure Characterization on TiO2 Based AnodesPreparation and Antibacterial Activity of Silver Ions-Substituted Hydroxyapatite/TitaniaPhotocatalytic Decomposition of NOx Using Ti-, V-, and Mo-MCM-41 CatalystsInfluence of Doping on the Antibacterial Effect of TiO2 NanoparticlesRaman Spectroscopic Investigation of Nitrogen-Doped Titanium Dioxide NanoparticlesCharacterization and Synthesis of Functional TiO2 Sol-Gel Coatings on the GlassPhoto-Oxidation Decomposition of TiO2 Photocatalyst for the Construction MaterialsPreparation of Ternary Compound BaLi2Ti6O14 by the Sol-Gel ProcessDependence of Yellow Phosphor on Optical and Electrical Properties of the White Light Emitting Diode ChipEffect of Hydrothermal Conditions on the Cation Exchange Capacity of MSWI Fly AshMechanical Properties of Nanocrystalline HVOF CoatingsCharacterization of Li1-xNi1+xO2 Prepared by Using Tartaric Acid as a Complexing AgentNd3+-Doped TiO2 Nanoparticles Prepared by Sol-Hydrothermal ProcessThe Effect of Substrates on the Characteristics of Titania Nano-Coated Particles Prepared by Fluidized Bed Chemical Vapor Deposition (FBCVD)Photocatalytic Properties of TiO2 Coatings Prepared by Cold Spray ProcessEffects of Constituents in Bio/Photocatalytic Hydrogen Production System Using Experimental Design ToolNanosized Titanium Oxynitride and Molybdenum Oxynitride Particles Assembled in Mesoporous Silica MCM-41Simulation of Electric Upsetting and Forging Process for Large Marine Diesel Engine Exhaust Valves Appearance of Indium Oxide Nanorods in MOCVD GrowthCompressive Deformation Behaviour of a Closed-Cell AluminumA Simple Reliable Method of Selecting Epoxy Molding Compounds for High Power Short Wavelength Light Emitting Diode PackagesEvaluating the Electrochemical Properties in the Protection Potential of Material for Use in Al Vessels in SeawaterA Slow Strain Rate Test Experiment to Evaluate the Characteristics of High-Strength Al-Mg Alloy for Application in ShipsEffects of Current Density on the Formation of Anodic Oxide Films on AZ91CdSe/ZnS Quantum Dots Loaded Solid Lipid Nanoparticles: Novel Luminescent Nanocomposite ParticlesCorrosion Behavior of Chromium Cast Iron and Steel in Hot Concentrated AlkalineIn-Situ Joining of Combustion Synthesized Ni-Al Alloys with Al Casting AlloyEvaluation of Microstructure on SiCp/AZ91 Magnesium Composite Fabricated by Rotation-Cylinder MethodSliding Friction and Wear Properties of Composite Reinforced by MulliteEnhancement of the Characteristics of the ALD HfO2 Film by Using the High-Pressure D2 AnnealingImprovement of the Core Loss of SiFe by Optimizing the Operation Conditions of the Laser ScribingNanocrystalline Structure of Organic Photoconducting Materials Derived by Microwave Recrystallization MethodMicrostructures and Wear Properties of Al Matrix Composites Fabricated by Two Different ProcessesDispersion Stability of Ni Nanoparticles in Ethanol with Poly (1-Vinyl-2-Pyrrolidone)Effect of Heat Treatment on Microstructure, Tensile Properties and Damping Capacity of Mg-Zr Wrought AlloyMicrostructures and Mechanical Properties of Mg-Zn-RE-Ca Casting AlloysCharacteristics of Thin Film of Nano-Hybrid Synthesized from Acrylic Resin and Colloidal Silca-Silane SolProperties of Coating Films Synthesized from Nano Colloidal Silica and Alkoxy SilanesEffect of Processing Parameters on the Fabrication of Al2O3p/Al Composites by In-Situ Reaction Process of Molten AlEffects of Processing Parameters on the Mechanical Properties of SiCp/AC8A Composites by Pressureless Metal Infiltration ProcessWear Characteristics of Particulate Reinforced Metal Matrix Composites Fabricated by a Pressureless Metal Infiltration ProcessModification of Mg2Si Morphology in As-Cast Mg-Al-Si Alloys with Strontium and AntimonyChipless Forming Process Using Rotary Swaging Machine with Four-DiesMicrostructure Analyses and FE Simulation of Automotive Product in the Hot Forging Process Using Aluminum AlloysCastability, Tensile and Creep Properties of Mg-xAl-Zn with Variation of Al ContentDevelopment of Manufacturing Process Using Cold Incremental Forming Technique for Micro-Alloyed Non-Heat-Treated MaterialDevelopment of Cube-Textured Ni and Ni-W Alloy Tapes by Focused Infrared HeatingShape Memory Effect and Superelasticity of an Equiatomic Ti-Ni Alloy with Surface Sulfide LayersElectrochemical and Structural Properties of Si/Ni/Cu Electrode Films Fabricated with Different MethodsReciprocating Sliding Wear Behavior of Inconel 600 Mated with SUS 304 Stainless Steel at Elevated TemperaturesThe Cavitation Behavior of Fe-Cr-C-Si-Ni AlloysEffect of Tin on the Microstructures and Mechanical Properties of a Au-Pt-Cu AlloyEffect of Indium on Bonding between Porcelain and Au-Pt-Cu AlloyFabrication and Magnetic Properties of Mullite Based Nanocomposites with Embedded FeCr Alloy NanoparticlesAl-La-Ni-Fe Amorphous Alloys and Amorphous-Crystalline Composites Produced by Mechanical AlloyingNet-Shape Forming of TiAl Automotive Parts for Fuel EfficiencyEffect of Al on Microstructural and Mechanical Characteristics of Plasma Electrolytic Oxide Coatings on MagnesiumEffect of Impurity and Gas Nature on Microstructure of SiC Microtubes in Double Step Reaction ProcessModified Fabric and Its Electromagnetic Protection CharacteristicsInterfacial Reaction between Molten Al Alloys and Titanium Matrix CompositesPreparation and Characterization of Chemical Activated Fibers on Various Carbon FibersFabrication of Ni Sulfides by Thermal SulfidationFabrication of Nickel-Silver Rods and Plate through a Small Cross Section Continuous Casting ProcessCombinational Effects of Ni Precursors on Ni/YSZ Cermet AnodeOptimization of Sheet Metal Process Parameters of a Shield Case Piece Using Computer SimulationDevelopment of 2-Cavity Die Casting Process for AM50 Mg Steering Column Lock Housing ModuleSynthesis Nanosized MgAl2O4 Spinel Powder with Excellent SinterabilityHigh Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based AlloyMechanical Behavior of TiB2 Nanoparticles Reinforced Cu Matrix Composites Synthesized by In-Situ ProcessingMicrostructures and Tensile Properties of Fe-40Al Intermetallic with High Boron ContentFluidity of A356 Alloy during In-Ladle DTC RheocastingHigh Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying ElementsMicrostructural Control of 7075 Al Wrought Alloys through Thixoextrusion RouteThermal and Phase Evolutions of As-Milled Powders Fabricated by Mechanical Alloying in the TiH2-C SystemH2S/CO2 Corrosion Behavior of Tubular Goods under High Temperature and High PressureImproved Heat and Corrosion Resistance of Mg-Al-Zn Alloys by Additions of Minor Alloying ElementsCharacteristics of Spent Foundry Sand - Loess Mixture as Ceramic Support MaterialsThe Transfection Efficacy of Chitosan-DNA Nanoparticles on MGC803, SMMC-7721, MG63 CellsCharacteristic Evaluation of Extrusion Parameters on Direct Extrusion Process of 3003 Al Alloy Used for Automotive Condenser TubingVacuum Diffusion Brazing of Al5052 Alloys Using Ag-28Cu Insert MetalMorphological Evolution of Primary Solid Phase in Semi-Solid Slurry during the Isothermal HoldingThermal Conductivity of Hot-Pressed BN CeramicsEvaluation of Oxidation Behavior of the C-B4C-SiC Composite through Continuous Measurement of Mass Change and Gas ConcentrationModeling for Optimum Thermal Property of Wave-Typed Heat Sink by Computational SimulationHigh Temperature Oxidation of TiAl(La)N Coating Deposited on a Steel Substrate by Arc-Ion PlatingHigh Temperature Oxidation of WC-ZrN Superhard Nanocomposite FilmHigh Temperature Oxidation of Electroplated Cr-C CoatingCyclic-Oxidation of Ti3SiC2 and Ti3AlC2 between 900 and 1200?C in AirSynthesis and Structural Investigation of Nano-Sized BaTiO3 PowdersAnalysis of Deformation Characteristics in Wave-Typed Heat Sink Composed of Fin and BaseThermal Stability of 40Cr Steel with Surface NanocrystallizationRecrystallization Behaviors and High Temperature Tensile Properties of Mg-Al-Sn-(Zn) Wrought AlloysImprovement of Corrosion Resistance of Stainless Steel by ZrO2-SiO2 Sol-Gel CoatingsFabrication of Nano-Sized Gold Dot Array Using Bi-Layer Nano Imprint LithographyMicrostructure Evolution with Solidification Rates in IN 738LC SuperalloyTGO Growth Behavior with Thermal Fatigue and Its Effect on Fracture Behavior of Thermal Barrier CoatingsRelationship between Microstructure and Tensile Strength in the Directionally Solidified (23-27) at. % Al-Ni AlloysSub-100nm Hybrid Stamp Fabrication by Hot EmbossingCharacterization of Fe-Mo Alloyed Nanoparticles Synthesized by Chemical Vapor Condensation ProcessGrowth of CNTs on 304 Stainless Steel Using Sparked Iron as a CatalystAbnormal Grain Growth Mechanism in AluminaEffect of MgF2 Additive on the Mechanical Properties in Hydroxyapatite / Zirconia CompositesEstimation of Low Cycle Fatigue Life on the Accumulated Hysteresis Energy of ?s??ep for Direct Aged Alloy 718 (Ni-Based Superalloys)The XPS and GDS Study of SrBi2Ta2O9/ZrO2/Si (MFIS) Structure According to Heat Treatment Effects of ZrO2 Buffer LayerEffect of Slag Layer on Flow Patterns in a Gas Stirred LadleEffect of Melt Depth and Nozzle Type on the Mixing Behavior in Bottom-Blown Steelmaking Ladle ? A Water Model ApproachThe Effect of Cold Equal Channel Angular Process on Texture of Magnesium Alloy (AZ31)Kinetic Analysis of the Decomposition of Calcium Carbonate Using Danyang LimestoneEffect of Frit Content in Ag Paste and Thickness of Transparent Dielectric on Yellowing PhenomenonEffect of Thermo-Mechanical Variables on the Dynamic Ferrite Transformation Induced by Hot Deformation in 0.22C-Mn SteelFormation of Ultra Fine Ferrite and Determination of Critical Strain in the Strain Induced Dynamic Transformation for 0.22C-Mn SteelPrediction of Flow Curves and Micro-Structural Evolution in Strain Induced Dynamic Transformation of Low Carbon SteelTextures and Mechanical Properties of Melt-Extruded Al-Cu AlloysEffect of Electromagnetic Stirring on Orientation Distribution Function of Primary Solid Phase of Al-Cu AlloyCell Sensing Margin of Lead-Free (Bi,La)4Ti3O12Thin Film Deposited on MTP Cell Structure in High Density FeRAM DeviceHydrogen Absorption Kinetics of Ti-Nb-Cr AlloysEffects of La2O3 on the Piezoelectric Properties of Lead-Free (Bi0.5Na0.5)0.94Ba0.06TiO3 Piezoelectric CeramicsQuantitative Analysis of Micro-Macro Domain Transition of PNN-PT-PZ(x) System at Higher PZ ContentEffects of Void Formation within the Pb-Free BGA Solder Balls on the Mechanical Joint StrengthInterfacial Reaction and Joint Strength on Cu UBM with Pb-Free Flip Chip Solder BumpsTEM Observation of Interfacial Reaction Layers Formed Between Pb(Lead)-Free Sn-3.5Ag Solder and ENIG Plated Cu SubstrateReliability of Sn-Ag-Cu Flip Chip Package with Underfill under Thermal ShockThe Effect of Boron on the Sliding Wear Behavior of Iron-Based Hardfacing Alloys for Nuclear Power Plants ValvesSliding Wear Behaviors of Steam Generator Tubes in Various EnvironmentsFabrication of Lead Free Micro Solder Powder by Melts Dispersion TechniqueEtching Mechanism of Pb-Free Glasses in Acid Solution for Barrier Ribs in Plasma Display PanelThermal Properties of Bi2O3-B2O3-ZnO Glass SystemFormation of Layer on Bismate Frit Surface during Wet MillingDevelopment of Novel Wastewater Reclamation System Using Microfiltration with Advanced New Membrane Material and ElectrodialysisChanges in Adsorption Characterization of MSWI Fly Ash by NaOH Treatment ( ? )Evaluation of Pelletized Adsorbent Made for Removing VOCs by MSWI Fly Ash ( ? )The Effect of Meta Kaolines on the Activation of Waste Concrete SludgesFabrication Characteristics of Mineral Wool Fiber Used the WasteApplication of Media Manufactural by Waste Plastic to Stormwater Treatment in Urban Drainage SystemRecycling of Waste Coal Fly Ash: Synthesis of Zeolite-Like Minerals from Residue Yielded by Extraction of Aluminum IonsPolymer/Inorganic Composite Materials for Quick Repair of Cement Concrete PavementLuminescence Porous Ceramics Using Recycling GlassEffect of Pair-Mineralizer on the Reaction of Alite and Calcium Langbeinite FormationZeolite Synthesis from Coal Bottom Ash for Recycling as an Absorbent of Heavy MetalsStabilization Behavior of Heavy Metals Derived from Wastes on Cementitious Minerals and HydratesEffect of Slag Compositions on the Extraction of Metallic Components from the Used PCBLow Temperature Synthesis of Porous Cordierite from Fly AshFabrication and Characterization of Porous Ceramic Panel Using Recycled Glass PowderFormation Characterization of Ultra-Fine Cu Powder from Cu(OH)2 Slurry by Wet Reduction MethodCharacterization of Friction Materials Reinforced by Porous MulliteA Study of Ga2O3 Nanomaterials Synthesized by the Thermal Evaporation of GaN PowdersCharacteristics of SnO2 One-Dimensional Nanomaterials Synthesized on TiN-Coated Substrates by the Evaporation of Sn PowdersSelf-Propagating High-Temperature Synthesis for Aluminum Oxynitride (AlON)Effect of Hydrogen Content on Characteristics of Cu/C: H Films Coated on Polyethylene Terephthalate Substrate Prepared by ECR-MOCVD Coupled with a Periodic DC BiasEffects of Annealing Atmosphere on the Optoelectrical Properties of ZnO Thin Films Grown by Atomic Layer DepositionSputter-Deposited Cr as an Alternative to Electroplated CrEnvironmentally Friendly Polyurea Microcapsules of Pesticides by PVA Mediated Interfacial PolymerizationRemoval of Bilirubin by Albumin-Fixed Polysulfone MembraneEffects of Anodizing Time on Anodizing of Mg-Al Alloy in Alkaline SolutionEnergy Efficiency Alloy Design in PSN-PMN-PZT Ceramic System for Piezoelectric Transformer ApplicationVibration-Damping Capacity of Lotus-Type Porous Magnesium at Room TemperatureMicrostructural Transformations of an Amorphous Fe90 Zr10 Alloy Induced by High-Energy Ball-MillingA Study for Microwave Enhanced Synthesis of NIR Absorbing MaterialsHydrothermal Syntheses of Nickel Nanosheets and Their MorphologyCharacterization of Ni Nanopowders Produced by Electrical Explosion of Wire TechniqueEffect of Physical and Chemical Change of Lignocellulosic Fiber on Heavy Metal Ion RemovalSurface Characteristics of the Engineered Polymeric Media for Filtration and Adsorption in Urban RunoffPreparation of Nickel Powders by the Reduction of Hydrazine of Ni(OH)2 Reactant Slurries from Nonaqueous MediaSynthesis of Nickel Powders by the Reduction of Hydrazine from Diethanolamine SolutionMechanical Properties of Copper Hollow Sphere Manufactured by Sintering ProcessNano Scale Material Property Measurement of MEMS Material Using Piezo Actuated Material Testing MachineEffect of Indium on the Microstructures and Mechanical Properties of Dental Gold AlloysRheological Characteristics of Mg-Al Alloys with Ceramic Particles for Meta FoamAn Amperometric Biosensor Using Prussian Blue Modified ElectrodePreparation of Activated Carbon Fibers by Chemical Activation Method with HydroxidesPreparation of Porous Hydroxyapatite Scaffolds for Bone Tissue EngineeringSynthesis of Biodegradable ?-TCP/PLGA Composites Using Microwave EnergySynthesis and Magnetic Properties of Fe/SiO2 Nanocomposite Powders by the Chemical Vapor Condensation ProcessFabrication of Nanoscale SiC-Based Ceramic Patterns with Near-Zero Residual Layers by Using Imprinting Technique and Reactive Ion EtchingPreparation of Silver Metallic Sponge from Macroporous Carbon TemplateSynthesis of Polymeric Precursor for Oxidation-Resistant SiCBN Ceramic Microstructure via Soft LithographyInfluence of the Cup's Edge Geometry on the Transferred Stresses to the Ball/Cup Interface in all Ceramic THREffect of Pouring Temperature and Holding Time at Semi-Solid Region on the Morphology of Primary Solid Phase in Semi-Solid SlurryFabrication and Microstructure of ZnO-TiO2 Composite Membranes by a Reverse Micelle and Sol-Gel ProcessingFabrication and Microstructure of ZnO-SiO2 Nanoparticles by a Reverse Micelle and Sol-Gel ProcessingInvestment Casting of Ti Alloys for Biomedical ApplicationControlled Release of Active Substance from Biodegradable Copolymer MatrixComparison of Silicon Coatings Deposited by Vacuum Plasma Spraying (VPS) & Atmospheric Plasma Spraying (APS)Environmentally Conscious Gas Mixtures for Magnesium Melt ProtectionHydrogen Permeation and Surface Characteristics of Pd-Coated Ni-Nb-Ta Amorphous Alloy MembraneComparison of Hydroxyapatite Synthesized under Different ConditionsDensification Mechanism of Fine Ni-20Cr Powder during Pulsed Electric Current SinteringInfluence of Two-Step Sintering on Transparency of High Purity AluminaRadio Frequency Interference Characteristics of Plate-Like Soft Magnetic Powders-Polymer CompositesSynthesis and Properties of Bulk Amorphous/Nanocrystalline Aluminum Alloy CompositesDesign for Environment (DfE) of Ultralight Aluminum Camshaft DevelopmentTribological Analysis of Al2O3/TiO2/ZrO2 Nanocomposites as an Alternative for THR MaterialsThe Characteristic of the La3Ga5SiO14 Single Crystal Grown by Vertical Bridgman Method in Ar AtmospherePreparation and Characterization of a New Type of Sr-Contained Hydroxyapatite Bone CementHigh Grade Purification of Sericite by Hydrocyclone and Magnetic SeparationFabrication and Properties of High Strength Al-8Fe-2Mo-2V-1Zr Alloy Produced by Melt Spinning TechniquesLow Elastic Modulus ? Ti-Nb-Si Alloys for Biomedical ApplicationsSurface Modification of Glass Plate to Enhance Thickness of Silica AerogelSynthesis of AlON Refractory Raw Materials from Aluminum Dross Using Thermite Reaction ProcessThermopneumatic-Actuated Polydimethylsiloxane (PDMS) Microfluidic SystemProcess Development for Cost-Effective Ag-Ni Contact Materials by Simple Solidification ControlNovel Method to Fabricate Porous n-HA/PVA Hydrogel ScaffoldsBiomimic Tubulose Scaffolds with Multilayer Prepared by Electrospinning for Tissue EngineeringA Fast and Low Temperature Eco-Process for Alloy's JoiningAntibacterial Effect and Security Evaluation on Nano-Hydroxyapatite Bearing Cu2+ and Zn2+Study on Improving Stainless Steel Antibacterial CapabilityInfluences of the Crystallization Behavior of n-HA Reinforced PA66 Biocomposite on Its Mechanical PropertiesFoaming Characteristics of Al-Mg Alloy FoamFabrication of Porous Clay Materials with Aligned Pore Structures by Freeze-DryingSolvents Effects on Physicochemical Properties of Nano-Porous Silica Aerogels Prepared by Ambient Pressure Drying MethodEstimation of Environment-Friendly Permeable Pavement at Laboratory TestDevelopment of Fiber Filter Media to Control Heavy Metals and Nutrients in Urban Stormwater RunoffUse of Bauxite Minerals to Control Pollutant Outflow in Urban AreasPreparation of SiC Nanoporous Membrane for Hydrogen Separation at High TemperatureKinetics of the SiC Formation from Carbon Thin Film and SiO GasModification of Natural Zeolite Powder and Its Application to Interior Non-Woven Textile for Indoor Air Quality ControlStudy on the Biomimetic Properties of Bone Substitute Material: Nanohydroxyapatite/Polyamide 66 CompositeVia/Hole Filling by Pulse-Reverse Copper Electroplating for 3D SiPElectrical and Luminescent Properties of Size Controlled ZnO NanorodsStructure and Electrochemical Properties of FeSx Nanoparticles Synthesized by Chemical Vapor Condensation ProcessEffect of Nano-Structures on the Optical Features of Hydrogenated Amorphous Si FilmsPhoto- and Electroluminescence of Hydrogenated Nanocrystalline Si Prepared by Plasma Enhanced Chemical Vapor Deposition TechniquesNanostructural and Optical Features of nc-Si:H Thin Films Prepared by Plasma Enhanced Chemical Vapor Deposition TechniquesEffect of Porosity on Fatigue Strength of Lotus-Type Porous CopperMicrostructure, Mechanical Property and Antibacterial Characteristics of Ferritic Stainless SteelEffect of Surface Morphology on Apatite FormationEffect of Compatibilizers on the Properties of Nano-Hydroxyapatite Reinforced Polyamide 66 and High Density Polyethylene BlendsStudy on the Properties of Microwave Absorption of Zinc Oxide WhiskerPreparation of Single-Phase Aragonite Precipitated Calcium Carbonate Used as an Inorganic Eco-MaterialInhibition Mechanism of Magnesium Ion on Carbonation Reaction with Ca(OH)2 and CO2Hydraulic Properties of Tetracalcium Aluminoferrite with Adsorption of Silicate IonsGrowth of ZnO Thin Films by Metalorganic Chemical Vapor Deposition Using Isopropyl Alcohol for Oxygen PrecursorGrowth of Carbon Nanorods on Tungsten Filaments of Light BulbsA Tetragonal Phase in Cr(N,O) Thin Film Prepared by Pulsed Laser DepositionClarification of Wire Heating Process in Pulsed Wire Discharge with High-Speed Gas PuffMechanical Properties and Machinability of Si3N4/hBN Composites Prepared by Pressureless SinteringMicro Groove Forming on AlN/hBN Composites Using Powder Blasting ProcessMicrostructural Development of SiC Ceramics by Liquid-Phase Sintering with Spark Plasma Sintering TechniqueChange of Formation Yield and Characterization of PCC Particle Synthesized with Impurity Ions Contents by Carbonation ProcessFabrication of Ceramic Microchannels with Tailored PoresElectrical Properties of (Ba,Sr)TiO3 Thin Films with Self-Seed Layer Deposited by R.F. Magnetron SputteringMicrostructure and Electrical Properties of R.F Magnetron Sputtering Derived PZT Thin Films Deposited on Interlayer for Pyroelectric IR SensorFactors of Nozzle Design Affecting on Supersonic Flow in Cold Spray ProcessPreparation of Electrically Conducting Ceramic FoamsSilicon to Silicon Wafer Bonding at Low Temperature Using Residual Stress Controlled Evaporated Glass Thin FilmEffect of the Palladium Mid-Layer on the Cyclic Oxidation of Platinum Aluminide Bond CoatingThe Effect of Tungsten Content on Nanocrystalline Structure of Ni-W Alloy ElectrodepositsMaterials for Devices Applications in Life SciencesLow-Temperature Thermoelectric Properties of Zn4Sb3 Prepared by Hot PressingElectrochemical Characteristics of Nano-Silicon/Graphite Composite for the Anode Material of Lithium Secondary BatteriesGraphite/Carbon Nanofiber Composite Anode Modified with Nano Size Metal Particles for Lithium Ion BatteryEffects on the Carbon Matrix as Conductor in Sulfur Electrode for Lithium/Sulfur BatteryFabrication and Thermoelectric Properties of p-Type Bi1Sb4Te7.5 Alloy Doped with Fe3O4Characterization of a Piezoresistive Microcantilever as a Sensor for Detecting the Bio-MoleculesCharacterization of Electrical Properties of Si Nanocrystals Embedded in an Insulating Layer by Scanning Probe MicroscopyCharge/Discharge and Electrochemical Characteristics of Secondary Lithium/Pyrite BatteryMicrostructure and Electrochemical Properties of Post Heat-Treated Li(Ni1/3Co1/3Mn1/3)O2 Cathode Materials for Lithium Ion BatteryEffects of Multiwalled Carbon Nanotubes on the Cycle Performance of Sulfur Electrode for Li/S Secondary BatteryThermoelectric Properties of Te Doped CoSb3 -4mol%Zn4 Sb3Fabrication of YSZ Thin-Film for SOFC Applied by Electron Beam PVDSynthesis of Ceria-Coated Copper Oxide Particles for Direct Hydrocarbon SOFCs AnodeMicrostructure and Thermoelectric Properties of P-Type Bi0.5Sb1.5Te3 Compounds Prepared by Spark Plasma SinteringEffects of Heat Treatment on Hardness of Nanocrystalline Ni-W ElectrodepositsThe Effects of Si Addition to the Tin Oxide Thin Films on the Electrochemical Characteristics for Lithium Secondary Microbattery AnodeEffects of Deformation on Atmospheric Corrosion of Galvanized SteelSurface Strengthening of Polymer Micromold Using Electroless Ni-P DepositionSynthesis and Analysis of Nano-Crystalline LiNiVO4
