Buch, Englisch, 530 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1100 g
Buch, Englisch, 530 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1100 g
ISBN: 978-0-87849-244-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Committees, Sponsors and Preface
A. Materials for Environment Preservation, Energy Conservation and New Energy
Preparation of Atomic Oxygen Oxidant by Electrolysis with Ultrasonic
Adsorption of Hazardous Heavy Metals Using Reactive Inorganic Agents in Synthetic Wastewater
Synthesis of Spherical Carbon Nanoparticles and their EDLC Properties
In-Flight Behaviors and Properties of Plasma-Sprayed Tungsten Coatings
Thermoelectric and Transport Properties of In-Filled CoSb3 Skutterudites
Synthesis and Electronic Transport Properties of Sn-Doped CoSb3
Strength and Densification of Ni/Al2O3 Membrane Compacted with Uniaxial Pressing and CIP for Hydrogen Separation: Influence of Pressing Process
Effect of Complexing Agent on Morphology and Crystal Structure of La1-xCexCoO3 (x=0, 0.2, and 0.4) Perovskite-Type Mixed Oxides Catalyst Prepared by Sol-Gel Method
Synthesis and Thermoelectric Properties of Half-Heusler Zr-Ni-Sn Alloy Processed by Mechanically Alloying and Hot Pressing
Preferential Oxidation of CO over Pt Catalysts Supported on Mesoporous Aluminosilicates in the Presence of H2
Synthesis and Characterization of Poly(ether ketone) Containing Side Sulfonic Acid Group for Proton Exchange Membrane Fuel Cell
Adsorption of Ag+ from Aqueous Solutions by Rice Husk
Synthesis and Characterization of Dumbbell Shaped Calcium Carbonate Induced by Lignin
Fixed Bed Column Filled with Rice Husk for the Removal of Cu (II) from Aqueous Solution
Study on the Energy Conversion from the Dynamic Load of Vehicles on the Road Using Piezoelectric Materials
Effect of Matrix on Phase Formation of Nanometer TiO2 Film
AFM Studies on the Effect of Crystalline Interphase on Adhesion of Polyurethane Thin Film to Al Substrate
Lead Based Multi-Alloy Applied to Anode of Zinc Electrowinning
Effect of Silicon Carbide Susceptor and Nickel Catalyst Content on Microwave Enhanced Thermal Conversion of Glycerol Waste
Synthesis of Nickel-Coated FeS2 Particles as Active Material for Li/FeS2 Cell by Mechanical Alloying
Optical and Electrical Properties of Large Area SnO2: F Thin Films by Spray Pyrolysis
Preparation of Textured PZT/LaNiO3 Films on LaAlO3 Substrates by Sol-Gel Process
B. Materials Processing Technologies for Reduction of Environmental Impact
Synthesis of Ti2AlC/Al2O3 Nanocomposites by High Energy Milling and Heat Treatment
Study on Preparation of Silica Aerogels/Polystyrene Microspheres with Core-Shell Structure
Non-Emulsifiers Multi-Liquid-Crystallized-Phase Opalescence Glaze
Relation between Phosphorus Amounts Absorbed by Volcanic Ash Fall Deposits and its Calcinating Temperature
Synthesis of V-ZrSiO4 Blue Ceramic Pigments
Synthesis of Forsterite Pigment for Underglaze Colors
Optimization of Manufacturing Conditions for Activated Carbon from Coffee (Coffea Arabica L.) Bean Waste by Chemical Activation
Surface Characterization of Oxygen Plasma Treated Nano-SiO2 Sol-Gel Coating UHMWPE Filaments
Pyrolysis of Solid Waste by Thermogravimetric Analysis
Preparation and Characterization of Thermoplastic Soy Protein Isolate
An Enhanced Algorithm for Detecting Blisters of Glass by Machine Vision
Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites
Process Feasibility Study on Thermal-Plasma System for HFC-23 Decomposition
Modeling of the Stress in 13Cr Supermartensitic Stainless Steel Welds by Artificial Neural Network
Artificial Neural Network Approach to Predict Mechanical Properties of 301 Austenitic Stainless Steel
Study of Cyclohexane Photooxidation over Pt-WO3 Catalysts Mixed with TiO2 under Visible Light Irradiation
Removal of NO2 and SO2 Using Porous Media Made from Sewage Sludge
Influence of Strain Aging on the Microstructure-Property of an X100 Pipeline Steel
Effect of Electron Beam Irradiation on the Properties of Polyethylene Oxide–TiO2 Composite Electrolyte for Dye Sensitized Solar Cells
C. Eco-Materials Processing and Design
Study on the Static Recrystallization Behavior of Thermal Deformation of Austenitic Stainless Steel for Nuclear Power
Synthesis of Ternary Machinable Al2O3/Ti2AlC Composites by High Energy Milling and In Situ Hot-Pressing Method
Novel Preparation of Silver-Coated Copper in Aqueous Solution
The Theoretical Research of Constitutive Property, Reactivity and FTIR of Chitosan
Synthesis of Ti3AlC2 Powder by High Energy Ball Milling and High Temperature Heat Treatment
Scale and Corrosion Inhibition Efficiency of a Novel Terpolymer
Effect of Foaming Temperature on Pore Morphology of Al/AlN Composite Foam Fabricated by Melt Foaming Method
Dynamic Compression Behavior of Lotus-Type Porous Iron
Formation of Hollow and Porous Nanostructures of Iron Oxides via Oxidation of Iron Nanoparticles and Nanowires
Fabrication of Lotus-Type Porous Magnesium with Anisotropic Directional Pores by Mold Casting Technique
Fabrication of Lotus-Type Porous Al-Ti Alloys Using the Continuous Casting Technique
Effect of Transfer Velocity on Porosity of Lotus-Type Porous Aluminum Fabricated by Continuous Casting Technique
Effect of Addition of NiO Powder on Pore Formation in Lotus-Type Porous Carbon Steel Fabricated by Continuous Casting
Effect of Pore Diameter Distribution on Heat Transfer Capacity of Lotus-Type Porous Copper Heat Sink for Air Cooling
Evaluating Durability and Burying Characteristic of PVC Pipe
Hot Corrosion of NiCrAlY/(ZrO2-CeO2-Y2O3) Composite Coatings in NaCl-Na2SO4 Molten Salt
Formation of Oxide Nanotubes and Bamboo-Like Structures via Oxidation of Cu, Fe and Ni Nanowires
Study on Bonding Performances of Air Plasma Treated FRP
Fabrication of Lotus-Type Porous Iron by Thermal Decomposition Method
EPP (Expanded Polypropylene) Media for Treating Trace Metals from Road Runoff: Performance Risk Assessment Using Uncertainty Analysis
Experiment on Combustion-Supporting Agent on PCI for Combustibility of Coal Powder
Effects of Oxygen Plasma Treated Carbon Nanotube Coating Basalt Filaments
Influence of Vanadium on Aging Characteristics of Cold Rolled Cu-Ni-Si Alloy
Experimental Study on Thermal Characteristics of Environment-Friendly Blocks with Water-Absorbing Polymer
Study on Thermal Environmental Characteristics of Water-Retentive Asphalt Pavement
3D Free Form Fabrication Using the Pivoting Side Trowel with Ceramic Material
Optimization Design of the Bonding Property between Flanges and Web Plates of Wood I-Joists
Use of Fly Ash as Bonding Material on Low Thermal Expansion Porous Materials
Red Tide Inactivation by Silver Doped TiO2 Produced in Sono-Chemistry Method
The Dominant Factor Analysis of Production Technology of Poplar LVL Based on Grey Theory
The Development of Solid Fabric Filter for CSOs Treatment
Strength Enhancement of Geopolymer-Based Concretes by Mixed Alkaline Activators
Evaluation on Application of Artificial Soil Made by Organic Wastes
Development of Non Explosive Insulating and Fire Proof Materials Using Porous Industrial Byproducts
Decomposition Characteristics of Wood Using Supercritical Methanol for Biodiesel Production
Effect of SiC Particle Size on Anti-Oxidation Behavior of C/B4C/SiC Composite
Eco-Friendly Fabrication Process of AlTiC Grain Refiner
Efficiency Evaluations of Filter Media for Reduction of Non Point Source in Urban Area
Corrosion Control of Drinking Water Copper Pipes by Corrosion Inhibitor
Application of Polymer Media to the Site for Treatment of Pollutants in Rainfall Effluent of Urban District
Deformation of Lotus-Type Porous Copper in Rolling
Elastic and Plastic Deformation Behaviors of Lotus-Type Porous Copper
Blow Forming of Lightweight Titanium Components
D. High Performance Materials Including Nano-Materials for the Environment
High Purity Ti2AlC Powder Prepared by a Novel Method
Effect of Atmosphere on the Crystallization of Amorphous Silicon Nitride
The Mechanical Properties and Fracture Characteristics of AlN/Ti Laminated Composites
Effect of Processing Condition on the Microstructure and Mechanical Properties of Ti3SiC2/SiC Composites
Fabrication and Microstructure of Fe-Al Intermetallic Compound Powders by Mechanical Alloying
Ni Nanoparticles Deposition onto CNTs by Electroless Plating
Study on the Erosion Wear Properties of Reaction-Bonded SiC
Effect of SiC Particle Sizes on Erosion Wear Behaviour of SiC/Epoxy Resin Composite
Effects of Thickness on Thermal and Mechanical Properties of Air-Plasma Sprayed Thermal Barrier Coatings
Microstructure Characterization of Duplex Stainless Steel Welding Joint with Different Solution and Aging Treatment
Influence of Sigma Phase Precipitation on Pitting Corrosion of 2507 Super-Duplex Stainless Steel
Improvement of Oxidation Resistance of SiC/C (Graphite) Composites by Silicon Infiltration in Surface
Studies on the Molecular Chain Conformation and Morphology of Konjac Glucomannan in Aqueous Solution
Nano Composite Membranes of Sulfonated Amine-Poly(ether sulfone)s and SiO2 for Fuel Cell Application
Synthesis and Characterization of Aminoalky Cellulose
Synthesis of SiOC Base Fibers from Silicone Resin with Low Carbon Content and Control of Surface Functionality by Metal Chloride Treatment in Vapor
Effects of Different Solid Lubricants on Mechanical and Tribological Properties of Al2O3/ZrO2 Nanocomposites
Microstructure and Wear Performance of Cu-Mo-Si Alloys Fabricated by Self-Propagation High-Temperature Synthesis
Microstructure and Mechanical Properties of Ca-a-Sialon with Low Oxygen Content
High Strength and Toughness Al2O3 Composite Materials for the Improvement of Ceramic Channel in SRL Hot Dipping System
Influence of Preparation Methods of Supported Zr Oxide Catalysts for Meervein-Ponndorf-Verlay Reduction of Acetophenone
Electrodeposition of Ni-SiC Nano Composite in Presence of Ultrasound
Boron Nitride Doped Transparent Polycrystalline Silicon Nitride Ceramics
Effect of Solution Temperature on Microstructure of 2205 Duplex Stainless Steel Welded Joints
Front End Bending in Plate Rolling Influenced by Asymmetrical Entrance Angle
A Model of Calculating Contact Length between Stock and Roll during Plate Rolling
Effects of the Cooling Rate on the Solidification Microstructure of Cu-Ni Alloy
Study on the Microstructure of Au/CdZnTe Interface by HRTEM
Surface Nanocrystallization of Zircaloy-4 by Surface Mechanical Attrition Treatment
E. Hybrid Materials and Composites for Eco Society
Improvement of the Dry Friction and Wear Properties of the Si/SiC by Doping with Ni and PbO
Fabrication and Thermal Property of AlN/ Epoxy Composites
Preparation and Dielectric Properties of Alumina Filled Epoxy Nano-Composite
Optimization Fabrication of Plasma Treated Nano-Titanium Dioxide Particles/PP/PLA Composites Filaments Using Melt Spinning
Electroless Copper Plating on Ti3SiC2 Powder Surface Using Ascorbic Acid as a Reducing Agent
Dynamic and Static Properties of Wood-Plastic Composites Made of Recycled High-Density Polyethylene
Analysis on Microstructure and Mechanical Properties of Pine Laminated Veneer Lumber
F. Photocatalysis for a Better Environment and Clean Energy
Fabrication and Application of Photocatalytic TiO2 Metal Membrane with Self-Organized Nano Tubes for Water Treatment
A New Preparation Method of Visible Light Responsive Titanium Dioxide Photocatalytic Films by Ultraviolet Irradiation
Sol-Gel Preparation of Bi2InTaO7 and its Photocatalytic Behavior for Organic Compounds Degradation
Effect of Calcination Temperature on the Photocatalytic Activity of Porous TiO2 Film
Synergistic Effects of Ferric Stearate, Ferrocene and NiDBC
G. Dye-Sensitized Solar Cells for the Utilization of Solar Energy
Photoinduced Absorption in P3HT/PCBM Bulk Heterostructures
Evaluation Methods of Energy-Storable Dye-Sensitized Solar Cells
H. Bio-Inspired Materials for a Better Life and Other Novel Materials
In Vitro Bioactivity, Cytotoxicity and Blood Compatibility of Anti-Bacterial Vacuum Plasma Sprayed Titanium Coatings
