Eco-Materials Processing and Design XI

Erscheinungsjahr 2010
ISBN: 978-3-908452-42-3
Verlag: Trans Tech Publications

Sonstiges, Englisch, 530 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

This special collection presents the fruits of a forum where researchers were able to present the most advanced and novel scientific results and technological developments in the field of eco-materials processing and design. The aim was to overview the current status and to foresee future likely trends in the field of eco-materials processing and design of energy- and environment-related materials. Many fruitful and exciting research achievements are presented here; not only in conventional areas, but also in sustainable energy sources such as solar cells and fuel cells, photochemistry, porous materials, biomass, and bio-inspired technologies for developing microstructures offering superior surface and bulk properties. Altogether, this work presents a unique overview of the topic.
Volume is indexed by Thomson Reuters CPCI-S (WoS).

Autoren/Hrsg.

Kim, Hyungsun

Yang, Jian Feng

Sekino, Tohru

Anpo, Masakazu

Lee, Soo Wohn

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preparation of Atomic Oxygen Oxidant by Electrolysis with UltrasonicAdsorption of Hazardous Heavy Metals Using Reactive Inorganic Agents in Synthetic WastewaterSynthesis of Spherical Carbon Nanoparticles and their EDLC PropertiesIn-Flight Behaviors and Properties of Plasma-Sprayed Tungsten CoatingsThermoelectric and Transport Properties of In-Filled CoSb3 SkutteruditesSynthesis and Electronic Transport Properties of Sn-Doped CoSb3Strength and Densification of Ni/Al2O3 Membrane Compacted with Uniaxial Pressing and CIP for Hydrogen Separation: Influence of Pressing ProcessEffect of Complexing Agent on Morphology and Crystal Structure of La1-xCexCoO3 (x=0, 0.2, and 0.4) Perovskite-Type Mixed Oxides Catalyst Prepared by Sol-Gel MethodSynthesis and Thermoelectric Properties of Half-Heusler Zr-Ni-Sn Alloy Processed by Mechanically Alloying and Hot PressingPreferential Oxidation of CO over Pt Catalysts Supported on Mesoporous Aluminosilicates in the Presence of H2Synthesis and Characterization of Poly(ether ketone) Containing Side Sulfonic Acid Group for Proton Exchange Membrane Fuel Cell Adsorption of Ag+ from Aqueous Solutions by Rice HuskSynthesis and Characterization of Dumbbell Shaped Calcium Carbonate Induced by LigninFixed Bed Column Filled with Rice Husk for the Removal of Cu (II) from Aqueous SolutionStudy on the Energy Conversion from the Dynamic Load of Vehicles on the Road Using Piezoelectric MaterialsEffect of Matrix on Phase Formation of Nanometer TiO2 FilmAFM Studies on the Effect of Crystalline Interphase on Adhesion of Polyurethane Thin Film to Al SubstrateLead Based Multi-Alloy Applied to Anode of Zinc Electrowinning Effect of Silicon Carbide Susceptor and Nickel Catalyst Content on Microwave Enhanced Thermal Conversion of Glycerol WasteSynthesis of Nickel-Coated FeS2 Particles as Active Material for Li/FeS2 Cell by Mechanical Alloying Optical and Electrical Properties of Large Area SnO2: F Thin Films by Spray PyrolysisPreparation of Textured PZT/LaNiO3 Films on LaAlO3 Substrates by Sol-Gel ProcessSynthesis of Ti2AlC/Al2O3 Nanocomposites by High Energy Milling and Heat TreatmentStudy on Preparation of Silica Aerogels/Polystyrene Microspheres with Core-Shell StructureNon-Emulsifiers Multi-Liquid-Crystallized-Phase Opalescence GlazeRelation between Phosphorus Amounts Absorbed by Volcanic Ash Fall Deposits and its Calcinating TemperatureSynthesis of V-ZrSiO4 Blue Ceramic PigmentsSynthesis of Forsterite Pigment for Underglaze ColorsOptimization of Manufacturing Conditions for Activated Carbon from Coffee (Coffea Arabica L.) Bean Waste by Chemical ActivationSurface Characterization of Oxygen Plasma Treated Nano-SiO2 Sol-Gel Coating UHMWPE FilamentsPyrolysis of Solid Waste by Thermogravimetric AnalysisPreparation and Characterization of Thermoplastic Soy Protein IsolateAn Enhanced Algorithm for Detecting Blisters of Glass by Machine VisionEffects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC CompositesProcess Feasibility Study on Thermal-Plasma System for HFC-23 DecompositionModeling of the Stress in 13Cr Supermartensitic Stainless Steel Welds by Artificial Neural NetworkArtificial Neural Network Approach to Predict Mechanical Properties of 301 Austenitic Stainless SteelStudy of Cyclohexane Photooxidation over Pt-WO3 Catalysts Mixed with TiO2 under Visible Light IrradiationRemoval of NO2 and SO2 Using Porous Media Made from Sewage SludgeInfluence of Strain Aging on the Microstructure-Property of an X100 Pipeline SteelEffect of Electron Beam Irradiation on the Properties of Polyethylene Oxide?TiO2 Composite Electrolyte for Dye Sensitized Solar CellsStudy on the Static Recrystallization Behavior of Thermal Deformation of Austenitic Stainless Steel for Nuclear PowerSynthesis of Ternary Machinable Al2O3/Ti2AlC Composites by High Energy Milling and In Situ Hot-Pressing Method Novel Preparation of Silver-Coated Copper in Aqueous SolutionThe Theoretical Research of Constitutive Property, Reactivity and FTIR of ChitosanSynthesis of Ti3AlC2 Powder by High Energy Ball Milling and High Temperature Heat TreatmentScale and Corrosion Inhibition Efficiency of a Novel TerpolymerEffect of Foaming Temperature on Pore Morphology of Al/AlN Composite Foam Fabricated by Melt Foaming MethodDynamic Compression Behavior of Lotus-Type Porous IronFormation of Hollow and Porous Nanostructures of Iron Oxides via Oxidation of Iron Nanoparticles and NanowiresFabrication of Lotus-Type Porous Magnesium with Anisotropic Directional Pores by Mold Casting TechniqueFabrication of Lotus-Type Porous Al-Ti Alloys Using the Continuous Casting TechniqueEffect of Transfer Velocity on Porosity of Lotus-Type Porous Aluminum Fabricated by Continuous Casting TechniqueEffect of Addition of NiO Powder on Pore Formation in Lotus-Type Porous Carbon Steel Fabricated by Continuous CastingEffect of Pore Diameter Distribution on Heat Transfer Capacity of Lotus-Type Porous Copper Heat Sink for Air Cooling Evaluating Durability and Burying Characteristic of PVC PipeHot Corrosion of NiCrAlY/(ZrO2-CeO2-Y2O3) Composite Coatings in NaCl-Na2SO4 Molten SaltFormation of Oxide Nanotubes and Bamboo-Like Structures via Oxidation of Cu, Fe and Ni NanowiresStudy on Bonding Performances of Air Plasma Treated FRPFabrication of Lotus-Type Porous Iron by Thermal Decomposition MethodEPP (Expanded Polypropylene) Media for Treating Trace Metals from Road Runoff: Performance Risk Assessment Using Uncertainty AnalysisExperiment on Combustion-Supporting Agent on PCI for Combustibility of Coal PowderEffects of Oxygen Plasma Treated Carbon Nanotube Coating Basalt FilamentsInfluence of Vanadium on Aging Characteristics of Cold Rolled Cu-Ni-Si AlloyExperimental Study on Thermal Characteristics of Environment-Friendly Blocks with Water-Absorbing PolymerStudy on Thermal Environmental Characteristics of Water-Retentive Asphalt Pavement3D Free Form Fabrication Using the Pivoting Side Trowel with Ceramic MaterialOptimization Design of the Bonding Property between Flanges and Web Plates of Wood I-JoistsUse of Fly Ash as Bonding Material on Low Thermal Expansion Porous MaterialsRed Tide Inactivation by Silver Doped TiO2 Produced in Sono-Chemistry MethodThe Dominant Factor Analysis of Production Technology of Poplar LVL Based on Grey TheoryThe Development of Solid Fabric Filter for CSOs TreatmentStrength Enhancement of Geopolymer-Based Concretes by Mixed Alkaline ActivatorsEvaluation on Application of Artificial Soil Made by Organic WastesDevelopment of Non Explosive Insulating and Fire Proof Materials Using Porous Industrial ByproductsDecomposition Characteristics of Wood Using Supercritical Methanol for Biodiesel ProductionEffect of SiC Particle Size on Anti-Oxidation Behavior of C/B4C/SiC CompositeEco-Friendly Fabrication Process of AlTiC Grain RefinerEfficiency Evaluations of Filter Media for Reduction of Non Point Source in Urban AreaCorrosion Control of Drinking Water Copper Pipes by Corrosion InhibitorApplication of Polymer Media to the Site for Treatment of Pollutants in Rainfall Effluent of Urban DistrictDeformation of Lotus-Type Porous Copper in RollingElastic and Plastic Deformation Behaviors of Lotus-Type Porous CopperBlow Forming of Lightweight Titanium ComponentsHigh Purity Ti2AlC Powder Prepared by a Novel MethodEffect of Atmosphere on the Crystallization of Amorphous Silicon NitrideThe Mechanical Properties and Fracture Characteristics of AlN/Ti Laminated CompositesEffect of Processing Condition on the Microstructure and Mechanical Properties of Ti3SiC2/SiC CompositesFabrication and Microstructure of Fe-Al Intermetallic Compound Powders by Mechanical AlloyingNi Nanoparticles Deposition onto CNTs by Electroless PlatingStudy on the Erosion Wear Properties of Reaction-Bonded SiCEffect of SiC Particle Sizes on Erosion Wear Behaviour of SiC/Epoxy Resin CompositeEffects of Thickness on Thermal and Mechanical Properties of Air-Plasma Sprayed Thermal Barrier CoatingsMicrostructure Characterization of Duplex Stainless Steel Welding Joint with Different Solution and Aging TreatmentInfluence of Sigma Phase Precipitation on Pitting Corrosion of 2507 Super-Duplex Stainless SteelImprovement of Oxidation Resistance of SiC/C (Graphite) Composites by Silicon Infiltration in SurfaceStudies on the Molecular Chain Conformation and Morphology of Konjac Glucomannan in Aqueous SolutionNano Composite Membranes of Sulfonated Amine-Poly(ether sulfone)s and SiO2 for Fuel Cell ApplicationSynthesis and Characterization of Aminoalky CelluloseSynthesis of SiOC Base Fibers from Silicone Resin with Low Carbon Content and Control of Surface Functionality by Metal Chloride Treatment in VaporEffects of Different Solid Lubricants on Mechanical and Tribological Properties of Al2O3/ZrO2 NanocompositesMicrostructure and Wear Performance of Cu-Mo-Si Alloys Fabricated by Self-Propagation High-Temperature SynthesisMicrostructure and Mechanical Properties of Ca-a-Sialon with Low Oxygen ContentHigh Strength and Toughness Al2O3 Composite Materials for the Improvement of Ceramic Channel in SRL Hot Dipping SystemInfluence of Preparation Methods of Supported Zr Oxide Catalysts for Meervein-Ponndorf-Verlay Reduction of AcetophenoneElectrodeposition of Ni-SiC Nano Composite in Presence of UltrasoundBoron Nitride Doped Transparent Polycrystalline Silicon Nitride CeramicsEffect of Solution Temperature on Microstructure of 2205 Duplex Stainless Steel Welded JointsFront End Bending in Plate Rolling Influenced by Asymmetrical Entrance AngleA Model of Calculating Contact Length between Stock and Roll during Plate RollingEffects of the Cooling Rate on the Solidification Microstructure of Cu-Ni AlloyStudy on the Microstructure of Au/CdZnTe Interface by HRTEMSurface Nanocrystallization of Zircaloy-4 by Surface Mechanical Attrition TreatmentImprovement of the Dry Friction and Wear Properties of the Si/SiC by Doping with Ni and PbOFabrication and Thermal Property of AlN/ Epoxy CompositesPreparation and Dielectric Properties of Alumina Filled Epoxy Nano-CompositeOptimization Fabrication of Plasma Treated Nano-Titanium Dioxide Particles/PP/PLA Composites Filaments Using Melt SpinningElectroless Copper Plating on Ti3SiC2 Powder Surface Using Ascorbic Acid as a Reducing AgentDynamic and Static Properties of Wood-Plastic Composites Made of Recycled High-Density PolyethyleneAnalysis on Microstructure and Mechanical Properties of Pine Laminated Veneer LumberFabrication and Application of Photocatalytic TiO2 Metal Membrane with Self-Organized Nano Tubes for Water TreatmentA New Preparation Method of Visible Light Responsive Titanium Dioxide Photocatalytic Films by Ultraviolet IrradiationSol-Gel Preparation of Bi2InTaO7 and its Photocatalytic Behavior for Organic Compounds DegradationEffect of Calcination Temperature on the Photocatalytic Activity of Porous TiO2 FilmSynergistic Effects of Ferric Stearate, Ferrocene and NiDBCPhotoinduced Absorption in P3HT/PCBM Bulk HeterostructuresEvaluation Methods of Energy-Storable Dye-Sensitized Solar Cells
In Vitro Bioactivity, Cytotoxicity and Blood Compatibility of Anti-Bacterial Vacuum Plasma Sprayed Titanium Coatings