Proceedings of the 8-th International Symposium on Impact Engineering
Erscheinungsjahr 2014
ISBN: 978-3-03835-129-0
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 8th International Symposium on Impact Engineering (ISIE 2013), September 2-6, 2013, Osaka, Japan
Buch, Englisch, 662 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1280 g
ISBN: 978-3-03835-129-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Technical Focus, Committees, Sponsors and Supporter
I: Plenary and Keyword Lectures
Dynamic Material Characterization Using Digital Image Correlation
Present Status and Future Problems on the Impact Resistance Performance Design of Civil Engineering Protective Structures
Proton Bombardment in Mercury Target for Neutron Production - Impact Dynamics on Interface between Liquid and Solid Metals
Thermal Processing History and Resulting Impact Response of a Hot-Formed Component with Tailored Properties – Numerical Study
II: Dynamic Deformation and Constitutive Relations
Dynamic Deformation Behaviors of High Performance Steels
Filtering Effects of Periodic Structure in Water Hammer
Dynamic Tensile Response of Magnesium Nanocomposites
Dynamic Tensile Characteristics of Nuclear-Grade Graphite IG-11
Effect of High Loading Rate on SCC Behaviour of SUS304 Austenitic Stainless Steel
Strengthening of FCC Metals at High Strain Rates
High Strain-Rate Compressive Behavior and Constitutive Modeling of Selected Polymers Using Modified Ramberg-Osgood Equation
Quasi-Static and Dynamic Compressive Properties of AZ31 Magnesium Alloy Processed by Equal Channel Angular Pressing
Modelling of Formation of Adiabatic Shear Bands
Identification Methods of Parameters for Johnson-Cook Constitutive Equation – Comparison
Dynamic Deformation Behavior of ECAPed AZ31 Magnesium Alloy
Experimental Analysis of Visco-Plastic Properties of the Aluminium and Tungsten Alloys by Means of Hopkinson Bars Technique
Effect of Deflection Rate on Bending Deformation Behavior of Fe-Based Shape Memory Alloy
Dynamic Compression Test of CFRP Laminates Using SHPB Technique
Effect of Pre-Fatigue Deformation under Humid Environment on Impact Tensile Properties in 7075 Aluminum Alloys
Impact Compressive Properties of Foamed Film with Closed Cell
A Study on Rate Sensitivity of Impedance in TRIP Steel during Deformation at Various Strain Rate under Two Kinds of Deformation Mode
Evaluation of Dynamic Deformation Properties of Metallic Materials with Different Crystal Structures Using Taylor Impact Test
Strain Rate Effects on Strain-Induced Martensitic Transformation and Electrical Resistivity of Deforming Stainless Steel
Dynamic and Quasi-Static Compressive Deformation Behaviour of Polyimide Foam at Various Elevated Temperature
III. Numerical Simulations in Civil Engineering
Mechanical Behavior of Polycrystalline Aluminum under Penetration with Extremely Large Loading Rates via Molecular Dynamics Simulation
Concrete Material Models in LS-DYNA for Impact Analysis of Reinforced Concrete Structures
An Analytical Study on Dynamic Strength Evaluation of Perfobond Strip Shear Connectors
Improving Rebound Models in 3D Rockfall Simulation Codes Used for the Design of Protection Embankments
IV. Dynamic Behavior of Structures in Civil Engineering
Behaviour and Design of Steel Columns Subjected to Vehicle Impact
Batter Pile Behavior Modeling Using Finite Difference Analysis
Failure Behavior and Numerical Simulation of the Local Damage of Ultra High Strength Fiber Reinforced Concrete Subjected to High Velocity Impact
Study on Dynamic Shear Resistance of RC Beams
V. Dynamic Failure and Fracture
Energy Absorption Property of CFRP under Impact Loadings
Micro-Tomography to Characterize Size Distribution of Fragments Created by Laser Shock-Induced Micro-Spallation of Metallic Sample
Impact Fracture of Jointed Steel Plates of Bolted Joint of Cars
High-Velocity Impact between Vehicles and Soft Bodies
Mechanisms of Energy Absorption during High Rate Loading of Cellular Lattice Structures
Experimental and Numerical Analysis of Repeated Impacts between Two Spheres
Modeling of Low Energy, Low Velocity Impact Failure of a Honeycomb Sandwich Material
Energy and Momentum Transfer to a Clamped Elastic Plate in an Air-Blast
Partial Destruction of Reinforced Concrete Wall by Small Blasting
Experimental and Numerical Study on the Dynamic Fracture Characteristics of Gray Cast Iron FC200
Dynamic Fragmentation Tests of LY12 Aluminum Alloy Using a SHPB Based Expanding Ring Technique
Characterization of the Loading Rate Dependent Fracture Behavior over a Wide Loading Rate Range Using Charpy Specimens
Impact Deformation and Dislocation Substructure of Ti-6Al-7Nb Biomedical Alloy
Velocity-Toughening and Crack Speed Oscillations in the Dynamic Fracture of PMMA Plates
Dynamic Axial Crushing of Empty and Foam-Filled Conical Aluminium Tubes: Experimental and Numerical Analysis
Numerical Analysis of the Brittle-Ductile Transition in the Failure-Mode in Polymeric Materials
Evaluation of Impact Fracture Toughness of AZ31 Magnesium Alloy
VI. Ballistic Response
Effect of Pre-Tension on Ballistic Resistance of Woven Fabric
Experimental and Numerical Study of a Combined Blast and Ballistic Protection
Ejecta Size Distribution Resulting from Hypervelocity Impacts between Aluminum Alloys
Microstructural Evolution from Shaped Charge through Steel Plates
VII. Penetration
An Examination of DOP Test of Ceramic Tile Subjected to Long Rod Penetration
An Investigation on the Grooved-Tapered Projectile Penetrating into the Concrete Targets
Projectile Mass Loss Model Using the Coefficient of Friction for High-Speed Penetration into Concrete
Penetration Velocity Measurement in Sands Using Magnet-Coil Gages
VIII. Dynamic Behavior and Application
Joining Experiment of Aluminum Sheets Using High-Speed Shearing
Pressure Measurement of Non-Ideal Detonation in Ammonium Nitrate Based High Energetic Material
Dynamic Behavior of Liquid Mercury Droplets Colliding with a Solid Surface
Rubber Ball Impacts on Composite Plates Investigation by 3D Correlation
Propagation of Underwater Shock Wave and Gas Bubble Behavior Induced by Electrical Discharge in Water
Effect of Impact Compression on Age Hardening Behavior of Aluminum Alloys
Blast Resistant Design of an Embassy Building
A Study on the Evaluation of Intelligent Headlamp Interworking with Camera and Navigation
Dynamic Impact Behavior of Ti-Ni Shape Memory Alloys in Two Different Compositions
IX. Elastic/Plastic Wave Propagation
Transient Phenomena in Wave Propagation around a Large Suspended Particle in a Water-Filled Tube
Measurements of Combined Pressure-Shear Waves by the Oblique-Parallel Impact Experiment
X. Dynamic Biomechanics and Sports Dynamics
Oblique Impact Analysis of a Golf Ball
Felled Trees as a Rockfall Protection System, Experimental Study for Numerical Models Calibration
XI. Numerical Simulations
Finite-Element Modelling of the Impact Behaviour of Aluminium Nacre-Like Composite
Analysis on Low Velocity Impact Damage and Compressive Residual Strength of Composite Laminates
Finite Element Simulation of Brittle Fracture of Bulletproof Glass System
Study of Material Modeling of Polymers for Impact Analysis
Numerical Analysis of Vehicle Occupant Responses during Rear Impact Using a Human Body Model
Design Methods for Window Stopper Component Strength Cushions Operating under Wind Gusts
Thermo-Elastic-Plastic Constitutive Model for Numerical Analysis of Metallic Structures under Local Impulsive Loadings
FEM Analysis of Cylindrical Structural Elements under Local Shock Loading
Simulations of High Velocity Impacts of Ice on Carbon/Epoxy Composite Laminates
Numerical Study of the Effects of Metallic Plates in the Attenuation of the HRAM Phenomenon
A FEM Study on Adiabatic Shear Band Formation in Tube Compression Driven by Electro-Magnetic Loading
XII. New Experimental Techniques
Hugoniot-Measurement Experiments of the Heated Samples
Development of an Output-Bar Supporting Stand to Suppress Transverse Vibration in Dynamic Tensile Test of Sheet Steel
The Development of Micro Ball Supersonic Impact Test System
Investigation of High-Speed Loading Effects on the Properties of Ferromagnetic Alloys Processed in an External Magnetic Field
A Study on Reduction of Friction in Impact Compressive Test Based on the Split Hopkinson Pressure Bar Method by Using a Hollow Specimen
Construction of Data Acquisition/Processing System for Precise Measurement in Split Hopkinson Pressure Bar Test
XIII. Structural Crashworthiness
Dynamic Crushing of Voronoi Honeycombs: Local Stress-Strain States
Energy Absorption of Thin-Walled Beams with a Pre-Folded Origami Pattern
Improvement of Energy Absorption of Circular Tubes Subjected to High Velocity Impact
Response of Sandwich Panels with Tubular Cores to Blast Load
Response of Filled Thin-Walled Square Tubes to Axial Impact Load
Experimental Evaluation of Dynamic Buckling Load of GFRP Rod for Gas Circuit Breaker
Mass Impact of Density-Graded Cellular Metals in a Temperature Field
Numerical Evaluation of Dynamic Behavior of Axial Crushing Honeycomb Based on Adhesively-Bonded Model
Evaluation of Sliding Behavior of Simple Structures for Oblique Collision
Characteristic Evaluation of the Enforcement Device for the Car
Study on Impact Collapse Characteristics of CFRP Double-Hat Members According to Stacking Angle
Damage Evaluation by Impulsive Response in Structure Filled with Liquid
A Fundamental Study on the Shock Cushioning Characteristics of a Novel pin-Fixed Aseismatic Connector for Bridges
