Selected, peer reviewed papers from the International Conference on Advances in Mechanical Engineering 2013 (ICAME 2013), August 28-29, 2013, Malacca, Malaysia
Buch, Englisch, 1040 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
ISBN: 978-3-03785-823-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Editorial and Committees
Chapter 1: Advanced Manufacturing and Industrial Processes
Case Study: The Methodology of Lean Manufacturing Implementation
Implementation of Continuous Flow System in Manufacturing Operation
Ergonomics Intervention in Assembling Air Handler Panels
Optimization of Surface Roughness and Recast Layer Thickness in the Wire-EDM Process of AISI D2 Tool Steel Using Taguchi-Grey-Fuzzy
Green Lean TQM Suppliers, Organization and Customers Management Practices in Malaysian Automotive Companies
Feed Rate Influence on Motion Error Characteristics of CNC Vertical Milling Machine
Virtual Production Line Layout Modeling Using Arena Simulation Software
Chapter 2: Advanced Materials, Materials Processing and Forming
Green Polyurethane Adhesive Bonding of Aluminum: Effect of Surface Treatments
Nanoindentation of Porous Die Attach Materials as a Means of Determining Mechanical Attributes
Effect of TiO2 Seed Layer Thickness to the Growth of TiO2 Nanostructures by Immersion Method for Memristive Device Application
Effect of Mixing Parameter on Electrical Conductivity of Carbon Black/Graphite/Epoxy Nanocomposite Using Taguchi Method
Effect of Electrode Types on the Resistive Switching Behavior of Titania Thin Films
Effect of Two-Cycle Heat Treatment on Mechanical Properties of Ductile Iron
Microstructure and XRD of Ductile Iron Using Annealing-Tempering Heat Treatment Process
The Influence of Alumina Filler on Impact Properties of Short Glass Fiber Reinforced Epoxy
Study of Creep Strength for P91 Steels after Short Term Overheating above Ac3 Temperature
Influences of Thickness and Fabric for Sound Absorption of Biopolymer Composite
Mathematical Model for Chip Serration Frequency in Turning of Stainless Steel with Magnetic Damping from Bottom of Tool Shank
Nanoclay Supporting Materials for Enzymes Immobilization: Kinetics Investigation of Free and Immobilized System
Fundamental Technique of Pre-Blending of Bio-Matrix with Commercial HDPE
Mechanical Properties of Tempered Ti-Nb Alloyed Ductile Iron
An Innovative Improvement on Standard Testing Procedure for Biomaterials under Uniaxial Tension
Effect of Carbon Fibre Ratio to the Impact Properties of Hybrid Kenaf/Carbon Fibre Reinforced Epoxy Composites
The Influence of Bath Concentration on Particle Size of Cobalt Nanoparticles
Synthesis Route towards Fine and Monodisperse Ni Nanoparticles via Hot-Injection Approach
Impact Toughness of Kenaf Powder, Polypropylene and Kevlar
Mechanical Properties of Aluminium Foam by Conventional Casting Combined with NaCl Space Holder
Dimensional and Thermal Stabilities of Nanomodified-Epoxy Systems
Storage Modulus Analysis of Kenaf Fibre Reinforced Epoxy Composites
Storage Modulus Capacity of Untreated Aged Arenga pinnata Fibre-Reinforced Epoxy Composite
Machinability Improvement for Stainless Steel AISI 304 in Turning by Applying Magnetically Damped Cutting
Chatter Suppression with Magnetic Damping in Turning of Stainless Steel AISI 304
Effect of Application of a Combination of Magnets on Chatter Amplitude Reduction in Turning of Stainless Steel AISI 304
Identification of Optimum Heating Temperature in Thermal Assisted Turning of Stainless Steel Using Three Different Approaches
Fibre Misalignment Measurement of Nanomodified-Unidirectional Carbon Fibre Laminates
Fracture Toughness of Nanomodified-Epoxy Systems
The Effect of Carburizing Medium on Carbon Dispersion Layer of ASTM A516 Steel
Boron Dispersion Layer of Paste Boronized 304 Stainless Steel before and after Shot Blasting Process
Co-Fe Nanoparticles Coated on Copper Substrate: Effect of Different Deposition Times
Effect of Low Impact Energy on Kenaf Composite and Kenaf/Fiberglass Hybrid Composite Laminates
Simulation and Experimental Investigation on Water Meter Housing Using FV Method
Study of Cutting Parameters Effects in MQL-Employed Hard-Milling Process for AISI H13 for Tool Life
Modelling of Material Removal Rate in EDM of Nonconductive ZrO2 Ceramic by Taguchi Method
Influence of Cutting Edge Radius in Micromachining AISI D2
Effect of Double Sided Process Parameters in Lapping Silicon Wafer
Surface Reversal Method for Cylindrical Tool Characterization
Chapter 3: Advances in Aerospace and Automotive
Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force
Effect of Extreme Temperatures on Coated Piston Crown for CNGDI Engine
Modeling of Flywheel Hybrid Powertrain to Optimize Energy Consumption in Mechanical Hybrid Motorcycle
Optimize Vane Length to Improve In-Cylinder Air Characteristic of CI Engine Using Higher Viscous Fuel
Advanced Autonomous Multirotor Response System
The Implementation of Cell-Centred Finite Volume Method over Five Nozzle Models
Embedded FBG Sensor in Aircraft Smart Composite Materials for Structural Monitoring
Wing-Fuselage Lug Stress Prediction Using Finite Element Method
Yaw Stability Analysis for UiTM's BWB Baseline-II UAV E-4
Longitudinal Flight Stability Augmentation of a Small Blended Wing-Body Aircraft with Canard as Control Surface
Aircraft Performance of Kenyalang Fuel Cell UAV
Performance and Emissions of Jatropha-Palm Blended Biodiesel
Development of Vehicle Blind Spot System for Passenger Car
UTeM`s Amphibious Hybrid Vehicle: Ride and Handling Analysis
Parametric Study of Nozzle Connections in Ellipsoidal Head Pressure Vessel
Numerical Study of Winglet Cant Angle Effect on Wing Performance at Low Reynolds Number
Chapter 4: Mechanics of Solids and Structures, Impact Mechanics
A Numerical FEM Solution of Gear Root Stress in Offset Axial Mesh Misalignment
Static Analysis of Stitched Sandwich Beams with Functionally Graded Foam Core
Impact Response of Laminated Composite Cylindrical Shell: Finite Element Simulation Approach
Effects of Foam Density and Wall Thickness Interactions on the Energy Absorption Performances
Parametric Study of Low Velocity Impact Using Finite Element Analysis
Contact Pressure Evaluation of a Gear Pair along the Line of Action Using Finite Element Analysis
An Experimental Study on the Ballistic Impact Behavior of Non-Filled Tank against Fragment Simulating Projectile (FSP)
Mechanical Properties of Trabecular Bone through Compression and Combined Compression-Torsion Test: A Comparative Study
Springback Analysis of Rectangular Sectioned Bar of Non Linear Work-Hardening Materials under Torsional Loading
Study on Fatigue Crack Growth of 6065-T4 Aluminium Alloy at Different Stress Ratio
Design, Manufacturing and Testing Process of Buckling and Bending Testing Machine Using Systematic Method
Numerical and Experimental Impact Analysis of Square Crash Box Structure with Holes
Modelling and Simulation of a Single Deck Bus Subjected to Rollover Crash Loading
Experimental Investigation on the Energy Absorption Capability of Foam-Filled Nomex Honeycomb Structure
Effect of Humeral Stem Shape on Displacement in Elbow Implant
Chapter 5: Powertrains and Alternative Fuels
Potential Utilization of Biodiesel as Alternative Fuel for Compression Ignition Engine in Malaysia
All Metal Low Resistance Oxy Hydrogen Gas Generator and its Integration with VCR Engine
Influence of Oxygenated Additive on Blended Biodiesel-Diesel Fuel Properties
Effect of Preheated Fuel on Mixture Formation of Biodiesel Spray
The Influence of Oxygen in the Carbonization of Oil Palm Shell on Bio-Char Yield and Properties
Hydro-Petrol Engine: Study on Fuel Consumption and Effect on Environment
Performance Analysis of Ground-Based Static Test for Hydrogen Fuelcell Propulsion System
Operating Characteristics of Gasifier Cookstove Using Different Biomass Materials
Chapter 6: Robotics and Mechatronics, Detection and Recognition
Development of Gait Training System Powered by Antagonistic Mono-and Bi-Articular Actuators Using Contraction Model Control Scheme
Development of Low-Cost Wearable Servo Valve Using Buckled Tube Driven by Servo Motor
Comparative Study between Wheeled and Tracked Mobility System for Mobile Robot
Optimization of One Legged Hopping Robot Hardware Parameters via Solidworks
Performance Comparison between RGB and HSV Color Segmentations for Road Signs Detection
Human Body Parts Detection Using YCbCr Color Space
An Underwater Glider for Subsea Intervention: A Technical Feasibility Study
Robot-Assisted to Elicit Behaviors for Autism Screening
Study on Social Interaction between Children with Autism and Humanoid Robot NAO
Identification of Reusable Controller Strategies for the System Design of Advanced Mechatronic Systems
Stair Climbing of a Track-Driven Mobile Robot with Flipper Arm
Strategy Model for Multi-Robot Coordination in Robotic Soccer
Human-Robot Interaction (HRI) for Children with Autism to Augment Communication Skills
The Development of Finger Rehabilitation Device for Stroke Patients
Performance Comparison between ANN and PCA Techniques for Road Signs Recognition
Finite Element Analysis on the Mechanism of Human Tactile Sensation in Comparing Different Material Properties and Thickness
Optical Flow Vectors Thresholding in Assisting Heading Direction Estimation
Chapter 7: System Dynamics, Vibration and Control
Input Shaper Design for Minimum over Travel
Antilock Braking System Slip Control Modeling Revisited
Multibody Dynamics Models of Railway Vehicle Using Adams/Rail
The Effectiveness of Operational Modal Analysis (OMA) for Detecting Saw Cut Damage in Fiberglass Reinforced Epoxy
Vibration Characteristics of Composite Plate Embedded with Shape Memory Alloy at Elevated Temperature
Transmissibility of a Laminated Rubber-Metal Spring: A Preliminary Study
A SIS Epidemic Model with Eventual Impulsive Effects
Control of Flexible Beam with Unmodelled Dynamics Using Second-Order Pole Placement and LQR Techniques
Ambient Response Modal Analysis on a CEM-1 Single-Layer Printed Circuit Board
Adaptive Active Force Control Application to Twin Rotor Mimo System
Analytical and Experimental Study on Balancing Using Influence Coefficient Method
Ankle Joint Stiffness and Damping Pattern under Different Frequency of Translation Perturbation
Chapter 8: Thermal Engineering, Fluid Mechanics, Energy Systems
Experimental Study of Airless Spray Jet Breakup at Elevated Temperature and Pressure
The CFD Simulation of Tray Dryer Design for Kenaf Core Drying
Research Development of Energy Efficient Water Hydraulics Manipulator for Underwater Application
Equilibrium Modeling in Updraft Gasifier for Refinery Sludge Gasification Using ASPEN PLUS Simulator
Experimental Model to Optimize the Design of Cylindrical Heat Pipes for Solar Collector Application
CFD Analysis of Temperature Distribution in Can-Type Combustor Firing Synthetic Gas
Impedance Induce Valve Pump in Closed Loop System
Flow Characteristics of a Servco Fume Cupboard
Theoretical and Experimental Analysis of Double Layer Quintuple Solar Oven
Mean Wind Flow Field around Idealized Block Arrays with Various Aspect Ratios
Stack Cooling Profile of an Air-Cooled 3-Cell Polymer Electrolyte Membrane Fuel Cell Stack
Thermal Analysis of Heat Recovery Unit to Recover Exhaust Energy for Using in Organic Rankine Cycle
Operating Condition Optimization of PEMFC via Visualization Technique
Numerical Investigation of Temperature Distribution in a Diffuser Equipped with Helical Tape
A Unified Adaptive Fanger's Model for Thermal Comfort in Tropical Countries
Experimental Investigation of Power Generation from Salinity Gradient Solar Pond Using Thermoelectric Generators for Renewable Energy Application
A Sensitivity Study of some Parameters on the Efficiency of a Passive Ventilation System Based on Solar Chimney
A Case Study on Indoor Comfort of Lecture Rooms in University Buildings
Study on Indoor Air Quality of a Small Office in a Tropical Country
Energy and Exergy Optimization of Hydrocarbon Recovery (HCR) Plant Considering Potential Environmental Impact and Economics
Computational Simulation of Boil-Off Gas Formation inside Liquefied Natural Gas Tank Using Evaporation Model in ANSYS Fluent
Using Computational Fluid Dynamics Simulation to Perform Fire Investigation
Numerical Analysis on the Effects of Cavity Geometry with Heat towards Contaminant Removal
Effects of Different Granular Viscosity Models on the Bubbling Fluidized Bed - A Numerical Approach
Fill Removal in Wellbore Using Coiled Tubing
Application of Total Variation Diminishing for 1D Nozzle Problem
Chapter 9: Tribology and Lubrication
Application of Fuzzy Logic Approach to Predict Maximum Oil-Film Pressure in Journal Bearing
A Modified Micro-Scale Abrasion for Large Hard Phase Cermet
Thermo Oxidative Degradation Behavior of Jatropha Curcass L. Oil in the Presence of Antioxidant
Effect of Bearing Mobility on the Kinetics Performance of TKA during Deep Flexion: A Computational Simulation
The Effects of Oil Groove Position on Torque and Frictional Force in Hydrodynamic Journal Bearing
Wear Particle Characterization and Severity Evaluation of Perodua Myvi 1.3L Automatic Transmission (AT) Fluid
Slurry Wear Test of Long Kenaf Polyester Composite (LKPC) and Long Kenaf Polyester with Fiberglass Composite
Analysis of Transmission Fluid in Manual Diesel Engine by Ferrographic Technique
Application of Response Surface Methodology to Predict Oil-Film Friction in Journal Bearing
Chapter 10: Related Topics
Sensitivity Study of Surface Curvature in Characterisation of Cartilage Mechanical Properties
A Study on IAQ in a Welding Laboratory
Wavelet Analysis: Mother Wavelet Selection Methods
Application of Wavelet Analysis in Blade Faults Diagnosis for Multi-Stages Rotor System
Slippery Motion between the Limbs of a Double Tendon Graft
Study on the Use of Micro-Perforated Panel to Improve Acoustic Performance in Mosque
Camera Calibration Technique Improvement for 3D Optical Gait Analyzer System
A Study on Effect of Intelligent Speed Adaptation (ISA) to Bus Drivers
Influence of Acoustical Absorbing Material on the Obstacle Detection Angle of an Ultrasonic Sensor
New Mouth Spacer Design for Dental Application
Emulation of Spasticity Symptoms in Upper Limb Part-Task Trainer for Physiotherapist Education
Failure Pressure Estimation of Corroded Pipeline with Different Depths of Interacting Defects Subjected to Internal Pressure
