Materials, Industrial, and Manufacturing Engineering Research Advances 2
Erscheinungsjahr 2015
ISBN: 978-3-03835-611-0
Verlag: Trans Tech Publications
Collection of selected, peer reviewed papers from the 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), February 4-6, 2015, Bali, Indonesia. The 123 papers are grouped as follows: Chapter 1: Materials Engineering, Chemical Technologies and Materials Processing; Chapter 2: Materials and Technologies in Environmental Engineering, Bio- and Green Production; Chapter 3: Materials and Technologies in Construction; Chapter 4: Materials and Technologies for Biomedical Application; Chapter 5: Technological Equipments and Machines; Chapter 6: Industrial Engineering
Buch, Englisch, 668 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1300 g
ISBN: 978-3-03835-611-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface
Chapter 1: Materials Engineering, Chemical Technologies and Materials Processing
An Introduction to Lightweight, Energy Saving, Environment Friendly Magnesium Based Nanocomposites: Materials of Upcoming Generation
Comparison of Three-Parameter Weibull Statistical Analysis of the Flexural Strength of Dense and Porous Sintered Clay
Influence of Nano-Polyaniline Contents on Mechanical Properties of Crosslink Recycled Polypropylene Polyaniline
TGO Formation with NiCoCrAlYTa Bond Coat Deposition Using APS and HVOF Method
Alteration by Cerium Element on Primary and Eutectic Mg2Si Phases in Al-20%Mg2Si In Situ Composite
Oxidation of Pure Aluminium Granules during In Situ Melting
Effect of Silver Nanoparticles in Silicalite-1 Zeolite on Antireflection and Antibacterial Performances
Improvement of Hydrophilic Stability of Diamond-Like Carbon Films by O2/CF4 Plasma Post-Treatment
An Improvement of Photoanode Performance for Enhanced Efficiency in Dye-Sensitized Solar Cell
Effect of Ingredient Loading on Vulcanization Characteristics of a Natural Rubber Compound
Effect of Ingredient Loading on Water Transport Properties of a Vulcanized Natural Rubber Compound
Effects of Electron Beam on Structure and Physical Properties of Natural Colorless Topaz
Effect of Ingredient Loading on Surface Migration of Additives in a Surfactant-Loaded Natural Rubber Vulcanizate
Characterisation of Moisture Absorption Effects on the Strength of Composite Materials
Modeling Interlaminar Shear Crack-Jump Phenomenon in Fiber-Reinforced Polymer Composites
Effect of the Gel Coat Composition on the Tensile Strength for Glass Fibre Reinforced Polyester Composites
UV LED Curing Formulation for Polyacrylamide Hydrogels
Mechanical Behavior Analysis of Apus Bamboo (Gygantochloa sp) Thin Plate Composite due to Adhesive Joint and Water Absorption Using Experimental and Finite Element Method
Analysis of Bending Loads on Bamboo-Balsa and Bamboo-Polypropylene Honeycomb Composite Sandwiches
Numerical and Experimental Analysis of Flexural Properties of Bamboo Tali Laminate Composite
Studies on Effect of Zinc Oxide (ZnO) Nanostructures Morphology by Modification of Sol-Gel Solution
Morphological Effect of Composite Coated SUS430 Steel during Thermal Oxidation Process
Dry Sliding Wear Behavior of A356-ZrO2 Metal Matrix Composite
Interlaminar Damage Behavior of CFRP Composite Laminates under Cyclic Shear Loading Conditions
Hydrothermal Synthesis Effect on Growth of Zinc Oxide Structure
Pulsed Current Electrodeposition of Mn-Cu Alloys on SUS 430 Substrate as Coating Material for SOFC Interconnect Application
A Study on the Effect of Binder Content for Pore Property of Fe Foam Using Slurry Coating Method
Investigation of Deposition Parameters Dependence on Sputtered Cu2ZnSnSe4 Thin Films Properties
Solution-Processable Field-Effect Transistor Behavior of p-Conjugated Oligothiophene
Parameter Design for Hardness of Metal Filled Epoxy Matrix
The Influence of Punch Angle on the Spring Back during V-Bending of Medium Carbon Steel
Interaction of Metal and Slag in Continuous Casting Mold
Mathematical Modeling of Heat Losses in Steelmaking Ladles
Study of Heat Dissipation Generated in Tool Designed for Friction Stir Welding Process (FSW)
Development of Aluminum Anodizing Process by the Power Supply Using Pulse Width Rectifying Method
Thermal Response of Activated Charcoal Modified Investment Casting Moulds
A Study on Different Welding Processes of IN718 for Elevated Temperature Application
A Study on Post Weld Heat Treatment of Friction Stir Welded Al2195 Blank for Spin Forming
Mechanical Properties of Shielded Metal Arc Welded Low Carbon Steel: Effect of Butt Joint Type and Uncapping of Excess Weldment
Effects of Salinity on Nanosilica Applications in Altering Limestone Rock Wettability for Enhanced Oil Recovery
The Effectiveness of Cationic and Polymer Inhibitors on Shale
Improved Coefficient of Friction Using Different Types of Lubricants in Drilling Operation
Chapter 2: Materials and Technologies in Environmental Engineering, Bio- and Green Production
Cellulose Nanowhiskers Reinforced Green Nanocomposites: Some Recent Development
Mechanical and Thermal Properties of Rubber Toughened Poly(Lactic Acid)
Mechanical Behavior of Composite Multilayered Basalt/E-Glass/Epoxy Pipe under Internal Pressure
Effect of Colorant on Tensile Strength and Carbonyl Index of Oxo-Biodegradable Low-Density Polyethylene Films during Thermal Aging
Sorption Kinetics of Pro-Oxidant-Loaded PE Plastic Bags in Aqueous Media
Effect of Filter Aids on Pressure Drop and Permeability of Two Different Filter Media
Novel Hydrophilic Chitosan and Sago Based Membranes for Pervaporation of Organic-Water Mixtures
Highly Response and Sensitive Copper Sensors Based on Chitosan Films
Overview on Mechanical-Chemical Ionic Liquid Pretreatment Study on Bioethanol–Based Lignocellulosics Biomass
Characterization of Nanosilica of Tapioca Peel as Adsorbent for Biomethane Storage System
Tensile and Morphological Properties of Hybrid Montmorillonite/Microcrystalline Cellulose Filled Polylactic Acid Composites: Effect of Filler Ratio
Effects of Pre-Treatment Conditions on Black Tilapia Fish Scales for Gelatin Extraction
Biopolymeric Adsorbent for the Removal of Methylene Blue: Characterizations, Equilibrium Isotherms and Kinetic Studies
Effect of Solvent on Adhesion Property of Glass Fiber Recycled by Superheated Steam
Recycling Technique of Carbon Fiber Laminate Using Hydrolysis Near Critical Region
Preparation of Cellulose Nanocrystal Aerogel from Wastepaper through Freeze-Drying Technique
Effect of Fluidization Number on the Combustion of Empty Fruit Bunch in a Fluidized Bed
Determination of Volatile Organic Compounds (VOCs) at Selected Pump Stations in Skudai, Johor Bahru
Carbon Dioxide Removal by Using Absorption Process with 5M Aqueous Solution of 2-(Methylamino)Ethanol
A Theoretical Performance of MR-DeDuster as a Fine Dust Emission Control System
Particulate Emission from Biomass Fuel Combustion
An Investigation of Carbon Dioxide Sequestration on Amine–Modified Kenaf: Adsorption Isotherm Study
Compatibility Issue Related to the Use of Biodiesel with Automotive Materials
Microwave Assisted Pyrolysis of Rice Husk in the Presence of Eco Friendly Microwave Absorber in Producing Bio-Oil
Chapter 3: Materials and Technologies in Construction
Cathodic Protection Effect of Reinforced Concrete Beam Specimens with Zinc Sacrificial Anode in Marine Environment
The Experimental Measurement on the Throwing Power of Sacrificial Anode Cathodic Protection for Concrete Piles in Natural Sea Water
Assessment of the Elastic Stress of 304 Stainless Steel Using Half-Cell Potential Measurement
Influence of Ion Irradiated Recycled Polyethylene on Physical Properties of Bituminous Binder
Utilization of Variable Resistor for Improvement of Impressed Current Cathodic Protection System on Reinforced Concrete Structures
Fresh Properties of Self-Compacting Concrete Integrating Coal Bottom Ash as a Replacement of Fine Aggregates
Effect of External Environment on the Properties of Selected Plasters
Determination of Salt Transport Properties of Sandstone: A Combined Experimental/Computational Approach
A Study on the Structural Analysis of Jacket Substructure Related to Offshore Wind Power Environment
Chapter 4: Materials and Technologies for Biomedical Application
Surface Characterization of Biomimetic Hydroxyapatite-Silver Functionalized on Polydopamine Film
Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Ceria-Zirconia Prepared by Colloidal Process
New Solvent System for the Fabrication of Polyvinyl Alcohol – Gelatin Nanofibers via Electrospinning
Composite of Poly Lactid Co-Glycolic Acid (PLGA)-Collagen Coated by Chitosan as Candidate of Hollow Fiber Small Diameter Vascular Graft
Investigation of Gamma Radiation on Hydroxyapatite Synthesized from Chicken Eggshell by ESR Spectroscopy
Preparation and Characteristic of Hydroxyapatite Synthesized from Cuttlefish Bone by Precipitation Method
The Effect of Silane on the Biomechanical Properties of PEEK/HA Composite
Design of Above-Knee Prosthesis: A Finite Element Stress Analysis
Porous Magnesium Scaffolds for Bone Implant Applications: A Review
Effects of Alkaline Treatment on Corrosion Behavior of Biodegradable Magnesium
Effect of Heat Treatment on Surface Morphology of Titanium
Characterisation and In Vitro Bioactivity of UV-Treated Anodised Titanium
Anodic Oxidation of Titanium in Acetic Acid for Biomedical Application
Effect of UV Light Treatment Condition on Apatite Formation of Anodised Titanium
Effect of UV Wavelength on Apatite Formation of Anodised Titanium
Analysis on Compressibility of Dental Amalgam Using Nanomaterial Zinc Oxide (ZnO)
Effect of Calcination on the Properties of Hydroxyapatite from Tilapia Fish Bones
Optimization and Characterization of Anatase Formed on Anodized Titanium in Sulfuric Acid
Electrophoretic Deposition of Hydroxyapatite Coatings on AZ31: The Effect of Nanoparticle Multiple Coating Approach
Effect of Processing Parameters and Heating Techniques on the Extraction Yield of Eurycomalongifolia (Tongkat Ali)
A Novel Approach of Using SMA Wires Actuated Stewart Platform for Continuous Passive Motion (CPM) of Ankle Rehabilitation Therapy
Behaviour of Acrylonitrile Butadiene Styrene (ABS) during Dewaxing Process for Investment Casting of Proximal Humerus Implant
Microstructure and Properties of Forged CoCrMo Alloy for Load Bearing Application
Chapter 5: Technological Equipments and Machines
Condition Monitoring of a Gear-Box Using Wear Particle Analysis Technique
Case Study on Reliability of Automotive Painting Shop Robots
Design of a High Accuracy 3-Axis Coordinate Measuring Machine Working on the Shop Floor
Flutter Analysis of Functionally Graded Panel Based on Neutral Surface
Effect of Refrigerant on the Exergy Loss and Performance in Air Conditioner Using Ejector as Expansion Device
Sensor Based on the Resonance Frequency for Detecting Overfilling in a Pressing Apparatus
A Review of Multiple Edge Detection in Road Lane Detection Using Improved Hough Transform
Road Safety Outcome Model among Commercial Bus
Modeling of Square Channel Reactor for Optimum Length Prediction
Enhancing Air Conditioning Performance Using TiO2 Nanoparticles in Compressor Lubricant
Performance Comparison of Automotive Air Conditioner Using Various Refrigerants
A Study on Dynamic Motion and Wave Power in Multi-Connected Float-Counterweight Type of Wave Energy Converter
Peristaltic Micropump with Multi-Electrodes Using Electrostatic Force
Dynamic Strength Analysis for Mooring Design of Ship
Improvement of Containment Spray Heat Exchanger in Structure Analysis
Bio-Mechanism Response of Mimosa Pudica against External Stimulation
Analysis on the Degradation Characteristics of 2G High-Tc Superconducting Wires in Accordance with Electrical Breakdown Voltage
Chapter 6: Industrial Engineering
Applying Game Theory to Competitive Production-Inventory Models with Vendor's Imperfect Production Processes and the Condition of Buyer's Exemption from Inspection
Level of Learning from Occupational Safety Accidents: Current Status in Malaysia
Using AHP Multiple Criteria Decision Making Approach for Selecting a Type of Industrial Plant at Risk on Fire
A Survey Instrument Design to Determine the Success Factors in Implementing the End-of-Life Vehicles (ELVs) Management System in Malaysia
Safety Assessment Model for Coastal Passenger Vessel in the Perspective of Compatibility of Life Jacket with the Coastal Passenger Vessel
New Product Pricing Using Fuzzy Logic Type-2
Future Trend Analysis on the Design and Performance of Solar-Powered Electric Unmanned Aerial Vehicles
Review of Solar and Battery Power System Development for Solar-Powered Electric Unmanned Aerial Vehicles
