2 vols. Set
Buch, Englisch, 1332 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2600 g
ISBN: 978-0-87849-246-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Sponsors, Committees and Preface
I. Advanced Composites and their Applications
A Pilot Study on the Flexural Properties of Vinyl Ester Composites Filled with Glass Powder
Advanced Conductive Composite Materials for Spacecraft Application
Azo Dye-Yellow 17 Wastewater Photocatalytic Degradation of by UV/TiO2 Combined with Ultrasonic Procedure
Bidirectional Oriented Magnetite-Coated Graphite Nanosheets/Epoxy Nanocomposite with Electromagnetic Interference Shielding Anisotropy
NIR Emission Analysis of Er3+/Yb3+ and Er3+/ Tm3+ Ions Doped Zinc lithium Boro Tellurite (ZLiBT) Glasses for Optical Fiber Amplification
Ceramifying Fire-Retardant and Fire-Barrier Unsaturated Polyester Composites
Co3Pt Nanocomposite Films for Perpendicular Magnetic Recording Media
Damping Capacity of SiCp/AZ61 Composites
Effect of Additives on the Performance of PU/SiO2 Hybrid Membrane
Effect of Ni Addition on In Situ WC-Cr3C2 Cermet Coating by Laser Controlled Reactive Synthesisuse
Effect of Z-Pin on the through-the-Thickness Strength of Woven Composite Laminates
Effects of Mechanical Alloying on the Mechanical and Tribological Properties of Al-Cu-Mg Matrix Composites Reinforced by Sub-Micron Silicon Carbide Particles
Effects of Surfactant Content and Clay Content on Properties of NR Nanocomposites
Electrical, Thermal and Positron Lifetime Spectroscopy Studies on Multi-Walled Carbon Nanotube Reinforced High Density Polyethylene/Carbon Black Nanocomposites
Electromagnetic Shielding Properties of Super Fiber-Reinforced Composites
Environmental Effects on Mechanical Properties of Modified and Unmodified Carbon Nanotube/Epoxy Resin Nanoomposites
Evaluation of Recycled Far-Infrared/Impact-Resistant Poly(propylene) Composite Plates
Fabrication and Properties of 1-3-2 Piezoelectric Composites
Fabrication and Properties of La-Manganite/SnO2 Composites
Flammability and Mechanical Properties of Sisal Fiber/Polypropylene Composites: Effect of Combination of Flame Retardants
Forced Motions of Composite Conoidal Shell Roofs with Complicated Boundary Conditions
Formation Mechanism and Properties of Polyvinylidene Fluoride (PVDF)/Nano-Silica Hybrid Membranes
Fracture Characterization of TiAl Matrix Composites by Addition of Fluoride Solid Lubricants
Friction and Wear Studies on the Aramid Fibre Based Non-Asbestos Brake Pads for Wind-Mill Application
HALE UAV Composite Wing Structure Design
Highly Stretchable Conductive Polymer Composited with Carbon Nanotubes and Nanospheres
Highly Transparent and Conductive Graphene Electrode
High-Strength Multifunctional Conducting Polymer Hydrogels
Influence of Base Thickness on Performance of 1-3-2 Piezoelectric Composite
Influence of CoO Phase on Structural, Magnetic and Electrical Properties of La0.7Ca0.3MnO3 and La0.7Sr0.3MnO3
Influence of Silicon on Interface Reaction during Aluminium-Silicon Carbide Bonding
Interfacial Property between Graphite/Epoxy Laminate and MWNTs/Polymer Nanocomposites
Manufacture Technology of Novel Reinforcing Composite Geotextile Made of Recycled Nonwoven Selvages
Mechanical Properties and Morphologies of Rice Husk Silica (RHS)/ Poly (butylene adipate-co-terephthalate) (PBAT) Composites: Effect of Silane Coupling Agent
Mechanical Properties of Epoxy Clay Nanocomposites
Multifunctional Braided Composite Rods for Civil Engineering Applications
Nanoeffects of Nanocomposites on the Petroleum Recovery and Solar Energy Efficiency
Novel Multiferroic Lead-Free BaTiO3/FeBSi Composite Films
Periodicity of Piezoelectric Ceramic Rods on Properties of 1-3 Type Cement Based Piezoelectric Composite
Photoelectrocatalytic Degradation of Isopropyl Alcohol by TiO2/Ti Thin-Film Electrode
Poly(styrene-b-butadiene-b-styrene)-Dye-Coupled Polyhedral Oligomeric Silsesquioxanes
Preparation and Characterization of Functionalized Graphene/Linear Low Density Polyethylene Nanocomposites
Preparation and Evaulation of Degradable Poly(lactic acid) Composite Dressings
Preparation and Properties of P-Type Transparent Conductive NiO Films
Preparation of Organic-Inorganic Core-Shell Particles and Influence on Corrosion Resistance of Cement
Preparation of Poly(diallydimethyl ammonium chloride) (PDDA)/Au Nanocomposite Film by In Situ Electrochemical Reduction and its Electrocatalytic Properties
Properties of Biodegradable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate)/Calcium Carbonate Composites
Rapid Consolidation of Nanocrystalline Al2O3 Reinforced Cr Composite from Mechanically Alloyed Powders by Pulsed Current Activated Sintering
Relative Post-Buckling Stiffness Calculation of Symmetrically Laminated Composite Plates Using an Exact Finite Strip
Room Temperature Growth of Cerium-Iron Oxide Nanorods
Simultaneous Synthesis and Densification of Nanostructured NbSi2-SiC-Si3N4 by Rapid Sintering
Solid Particle Erosion of Particulate Filled Short Glass Fiber Reinforced Polyester Resin Composites
Stiffness Reduction of Woven CFRP and CFRTP Spring under Ultra High Cyclic Fatigue for Vibration Conveyor
Studies on Preparation and Properties of LiFePO4 Cathode Material Modified by Polyacenic Semiconductor Materials for Lithium Ion Batteries
Studies on Preparation and Properties of Novel Gel Polymer Electrolyte
Study on Erosion Wear Behavior of PDCPD/MMT Nanocomposite
Study on Impact Fractures of Adhesively Bonded Composite Joints
Study on the Crystallization and Morphology of HDPE-g-GMA Modified PA66/UHMWPE Blends
Study on the Mechanical and Electrical Properties and Creep Behaviour of Carbon Fiber Nano-Composites
Study on the Preparation and Properties of EVA-G-PU/OMMT Nanocomposites
Synthesis of Ferrite Nanoparticle and Ferrite-Gold Heterostructures
Synthesis of Carbon-Encapsulated Metal (Fe,Co,Ni) Nanoparticles by Detonation Decomposition of Composite Explosives
Synthesis of Magnetic TiO2 Nanoparticles as Bactericidal Photocatalyst
The Cosserat Elasticity Constants of Circular Cell Honeycombs
The Effect of Visible Light-Activated TiO2 Thin Film on Nosocomial Pathogens
The Inhibition Effect of TiO2/Ag Thin Film on Acinetobacter baumannii
The Study on the Decomposition of Azo Dye by La-Modified TiO2
Thermal Post-Buckling Analysis of Functionally Graded Composite Plates with Nonlinear Aerodynamic Forces
ZnO Porous Plate Films Application in Quantum Dot Sensitized Solar Cells
III. Bio-Materials and Biomimetic
Absorbable Suture Made from Rice Starch
Assessing the Effects of Natural Variations in Microstructure for the Biomimetic Modeling of Cuttlebone
Carboxymethyl Chitosan/Hydroxyapatite Composite Scaffold for Bone Regeneration
Characterization of Microstructure and Compressive Deformation Behavior of Reinforced Porous Poly(L-lactide)
Comparative Bioavailability Studies of Two Indomethacin Controlled Release Formulations in Healthy Albino Sheep's
Dynamics of Flower Head Movement in Bio-System
Effects of Material on the Deployment of Coronary Stents
Experimental Analysis of Polymerization Shrinkage of Dental Restoration Material in Cavities
Fabrication and Characterization of RF Plasma Polymerized Thin Films from 3,7-Dimethyl-1,6-octadien-3-ol for Electronic and Biomaterial Applications
Fabrication of Gelatin/Carbon Nanocomposite for Human Tissue Adhesive
Mechanical, Thermal and Morphological Behaviors of Coconut Shell Powder Filled Pu/Ps Biocomposites
Morphological Variations of Hydroxyapatite Nanostructures by Different Synthesis Methods
Nanoceramics Composite Biomaterials in the Calcium Carbonate-Hydroxyapatite System
Photocuring of Gelatin Films with TMPTMA: Effect on Aging Properties
Preparation and Characterization of Gamma Radiation Cured Gelatin-PVA Bio-Blend
Preparation and Characterization of Starch/PVA Blend for Biodegradable Packaging Material
Preparation and In Vivo Study of an Anti-Infective Highly Volatile Wound Dressing Material
Preparation of Degradable Tencel Composite Dressings
Processing and Characterization of Tissue Adhesive from Rice Starch Nanocomposites
Removal of Cationic Dye from Aqueous Solution by Adsorption on Activated Carbon Developed from Xanthoceras SorbifoliaBunge Hull
Structure-Property Relationship of Castor Oil Based Chain Extended Polyurethane/Starch Biocomposites
Study of Raman Spectrum of Fe Doped CeO2 Thin Films Grown by Pulsed Laser Deposition
The Effect and Characteristics on Chitosan Nanoparticles with Different Concentration of TPP
Synthesis and Characterization of Bacterial Cellulose Nanocrystals and their PVA Nanocomposites
Synthesis and Characterization of SA-g-MAA Co-Polymer: Effect of Grafting and Process Variables on Controlled Release of an Anti-Bacterial Drug
Synthesis and Characterization of Silk Fibre Reinforced Cepu Composites
The Development of Gelatin/Chitosan Hybrid Scaffold for Mouse Embryonic Stem Cell Line ATDC5
IV. Characterisation and Assessment
Adhesion Strength of BNT Films Hydrothermally Deposited on Titanium Substrates
Characterizing Interphase Properties in Fiber Reinforced Polymer Composite with Advanced AFM Based Tools
Constructability and Performance of Prospective Materials for Repair of Airfield Damaged Concrete
Curing Kinetics and Rheology of Diglycidyiether of Bisphenol-A Modified by Poly(ethylene glycol) Flexible Chains
Effect of UV and Gamma Radiation on the Mechanical and Degradation Properties of LLDPE-Clay Composites
Effective Cutoff Wavelength Measurement of Bend-Insensitive Fiber by Longitudinal Misalignment Loss Method
Electrochemical Deposition of Metallic Lead Particle Film
Microstructure Analysis of TaN/Cu Nanocomposite Coatings Deposited by Pulsed DC Magnetron Sputtering
Preparation and Nanomechanical Characterisation of Metal Containing Amorphous Hydrogenated Carbon Nanocomposite Films
Self-Organization of Macromolecules in Novel TPU-Clay Nanocomposites
Small Punch Test of LC4/SiCp Metal Matrix Composites
Study on Design and Evaluation Method for Transport Packaging Protection
Temperature Dependent Electrical Properties of Conductive Composites (Behavior at Cryogenic Temperature and High Temperatures)
Thermal Relaxations of Polymers Revealed by Reversing and Non-Reversing Coefficient of Thermal Expansion
V. Damage Identification and Properties / Integrity
Study of Static Characteristics of Delaminated Composite Conoidal Shell Subjected to Point Load
VI. Intelligent Processing of Materials and Structures
Development of Advance Thermal Barrier Coating in Gas Turbine
Effect of Process Condition in the Centrifugal Casting on the Mechanical Behavior of Cr Heat Resisting Steel
Effects of Hot Isostatic Pressing on the Microstructure of the Ni-Base Super-Alloy
Evaluation and Preparation of PET Aluminum Foil/PLA Nonwoven Compound Fabric as Electromagnetic Shielding Effectiveness Protective Clothing
Evaluation on the Sound Absorption and Mechanical Property of the Multi-Layer Needle-Punching Nonwoven
Improvement in Etching Factor of Micro Patterns by Controlling Residual Stress of Copper Thin Foil
Improvement of Mechanical Properties of Semi-Solid Alloys by ECAP Processing
Mechanical Property Evaluation of IRM®/Chitosan Fiber Composite Temporary Filling Material
Mold Development for Resin Transfer Molding with Dimension Variation and Deformation Compensation
Preparation of Functional Low-Cohesive Composite Dressings
Study for Bubble Dynamics of Nucleate Boiling in Narrow Channels
The Dependence of PET Layer on the Thermal Stability of PET-ITO Substrate for Mobile Electronics
The Effect of Thickness on the Magnetic Anisotropy and Magnetic Properties of Single-Layered FePt Films by In Situ Annealing
Thermal Resistivity Properties of LED Packages with Thermal via
VII. Modelling and Analysis
A Generic Model for Predicting the Permeability of Fiber Mats
An Investigation on the Local Structure of Silicon: Liquid to Undercooled Regime
Block Copolymers on a Physically or Chemically Patterned Substrate
Coupling of Continuum Damage Mechanics with De-Cohesive Element for Delamination Analysis in Laminated Composites
Determination of Number of Layers and Stacking Sequence of Composite Bicycle Frame
Effects of Graphene on a Resin Transfer Molding Process Using Bisphenol A Based Epoxy Resin
FEM Analysis of 1-3 Cement Based Piezoelectric Composites
Formation of Resin-Rich Zones in Composites Processing
Fracture Failure Analysis of Twin Rolling Casting Magnesium by Hot Compression
Implementation of the Method of Fundamental Solutions and Homotopy Analysis Method for Solving a Torsion Problem of a Rod Made of Functionally Graded Material
Interacting Crazing Patterns Near the Tip in the Damage Zone of a Crack
Investigating Particle Effect on Tensile Strength of Particulate Nanocomposites
New Approach of Multi Scale Modeling Based on the Hygro-Cosserat Theory for Self Desiccation Deformation of Cement Mortars at Early Age
Numerical Analysis on the Compressive Behaviors of Aluminum Foam Material Using Computed Tomography Imaging
Numerical Simulation of Flash Butt Welding of High Manganese Steel Crossing with Carbon Steel Rail
Optimal Design of the Aluminum Electrical Railcar under Uncertainty of Material Property
Progressive Damage Analysis of Laminated Composites Using Element Free Galerkin Method
Study on the Copolymers of their Microstructure and the Performances by Molecular Simulation
The Kinetic Description for Solid State Phase Transformation
Thermo-Mechanical Analysis in W/Cu-Alloy Joints with Different Interlayer Thickness
Transverse Stresses in Antisymmetric Angle Ply Sandwich Plates – Analytical Evaluation of Refined Higher Order Shear Deformation Theories
Viscoelastic Characterization of Fiber-Reinforced Elastomeric Composites at Finite Strain
VIII. Nano-Materials, -Sensors and -Actuators
2-D ZnO Nanostructures on Aluminum by Solution Method
A Convenient Method for Preparing Well-Dispersed Er2Zr2O7 Nanocrystals
Aggregation Characteristics of Cu and Ag Nanoparticles in Presence of Starch as the Polymer Stabilizer
Buckling Analysis of Micro- and Nano-Rods/Tubes Based on Nonlocal Timoshenko Beam Theory Using Chebyshev Polynomials
Carbon Nanostructures of Multiple-Branched Fibers Obtained from Alcohol Flames
Carbon Nanotubes Grown by Ethanol Catalytic Combustion with an Additive of Thiophene
Characterization and Photocatalytic Activity of La1.6Ln0.4Zr2O7 (Ln= La, Nd, Dy, Er) Nanocrystals by Stearic Acid Method
Consolidation and Mechanical Properties of Nanostructured SiC from Mechanically Activated Powder by High-Frequency Induction-Heated Sintering
Controlling Physical Properties of Cementitious Matrixes by Nanomaterials
Crystallization Mechanism of Si/Cu100-xZrx Bilayer Film for Write-Once Blue Laser Optical Recording Media
Effect of Gold Addition on Electrical and Optical Properties of NiO Films by Rf Sputtering
Effect of Pd Nanoparticles on Thermal Degradation Kinetics of iPP/Pd Nanocomposite
Effect of Thicknesses on the Microstructure and Magnetic Properties of CoPt Thin Films
Effects of Concentration of Electrolyte on the Synthesis of PbO Nanostructure by Electrochemical Deposition
Electrochemical Deposition of Lead Oxide Nanorods
Estimation of Cure and Thermal Degradation Kinetics of Epoxy/Organoclay Nanocomposite
Exfoliation of Graphite via Edge-Functionalization with Carboxylic Acid-Terminated Hyperbranched Poly(ether-ketone)s
Fabrication of Ag Nanoparticles Colloids by Pulsed Laser Ablation in Liquid
Fabrication of Arrays of Zinc Oxide Micro/Nano Pillars in Aqueous Solution under an External Electric Current
Gas Sensing Properties of Chemically Synthesized V2O5 Thin Films
GeCu/Si Bilayer Thin Film for Write-Once Blue Laser Optical Recording Media
Growth of Arrayed ZnO Nanorods from Aqueous Solution at 60°C
Hydrogen Storage Behaviors of Ni-Loaded Activated Carbon Nanotubes
Hydrous Ruthenium Oxide Coating on SWCNT Substrate for the Electrode of Supercapacitor
Influence of Potassium Chloride on the Electrochemical Deposition of ZnO Plate Films
Iron-Filled Carbon Nanotube Arrays Obtained by Floating Catalyst Chemical Vapor Deposition
Large-Scale Synthesize ZnO Micro/Nano Rods Fabricated from Aqueous Solutions at Low Temperature
Lead Hydroxide Nanowires Obtained from Lead Nitrate Solution by Adding Chloride Ions
Magnetic Properties of Single-Layered Fe100-xPtx Films by Rapid Thermal Annealing
Magnetic Properties of Some Hydrated Transition Metal Oxide and Hydroxide Nanoparticles Synthesized in Different Media
Microstructure and Crystallization Mechanism of (GeSbSn)100-xFex Phase Change Optical Recording Films
Nano Positioning Control for Ultra-Precision Machining Using Inverse Hysteresis Model
Nano Structure and Properties of Beta–D-Poly-Glucopyranose
One-Step Process for the Exfoliation and Surface Modification of Graphene by Electrochemical Method
Onion-Like Carbon Transformed from Nanodiamond
Preparation and Characterization of an Alginate/Clay Nanocomposite for Optoelectronic Application
Preparation of SiC/SiO2 Core-Shell Coaxial Nanostructure
Properties and Rapid Consolidation of Nanostructured Fe3Al Compound by High Frequency Induction Heating
Research on the Nanoscale Additives to the Ni(OH)2 Electrodes for High Power Ni/MH Batteries
Ru(II) Complex Based Optical Oxygen Sensors
Sintering and Mechanical Properties of Dense Hydroxyapatite Nanocomposites
Synthesis and Characterization of Nanocomposites Based on Copolymers of POSS-ONDI Macromonomer and TFONDI: Effect of POSS on Thermal, Microstructure and Morphological Properties.
Synthesis and Controlled Growth of ZnO Nanorods Based Hybrid Device Structure by Aqueous Chemical Method
Synthesis of a Range of Functional Oxide and Sulphide Nanoparticles by Biopolymer Stabilization and Enzymatic Treatment
Synthesis of Graphene Nanosheets via Thermal Exfoliation of Pretreated Graphite at Low Temperature
Synthesis of Nanosized Phases from an Atomic Carbon
Synthesis of Well-Aligned Multi-Walled Carbon Nanotubes by Floating Catalyst Chemical Vapor Deposition
Temperature Effects on Synthesis of Multi-Walled Carbon Nanotubes by Ethanol Catalyst Chemical Vapor Deposition
The Effect of Holding Time on the Mechanical Properties and Microstructure of Sintered NbC Composite
The Efficiency on Mechanical and Thermal Characteristic in Polyurethane/Silica Nanocompounds
ZnO Nanorod Arrays and Nanowires by Hydrothermal Growth
IX. Non-Destructive Evaluation Technology
A Nondestructive Study on Fiber Layup and Porosity Level in CFRP Composite Laminates Using Ultrasonic Pitch-Catch Method
An Investigation on Vibration and Thermal Change of High Speed Lathe Processing Using Infrared Thermal Imaging Technique
Application of the Ultrasound-Infrared Thermography Technique for Non-Destructive Evaluation of Defects in Shoe Bonding Parts
Internal Defect Inspection of Composite Material Using Non-Contact UT
Measurement of Bridge Fundamental Frequency by Resistance Strain Gauges
Nondestructive Evaluation of Braided Carbon Fiber Composites Using High Tc SQUID
Terahertz Ray Nondestructive Characterizations in FRP Composites
Thermal Insulation Test of RCCW with Inner Insulating Layer
Ultrasonic Propagation Imaging for Wind Turbine Blade Quality Evaluation
XI. Optical Sensor Technology
Aggregation, Isomerization and Thermo-Optic Property of Azobenzene Polyelectrolyte
All-Fiber Optic Chemical Sensors for Public Safety Monitoring
Design of Fiber Bragg Grating Acoustic Sensor for Structural Health Monitoring of Nuclear Power Plant
Finite Element Analysis of Mass-Spring System for Measurement of Relative Moving Displacement
High-Speed Wavelength Interrogator of Fiber Bragg Gratings for Capturing Impulsive Strain Waveforms
Photorefractive Materials, from Polymer to Hyper-Structured Molecule
Synthesis and Photophysics of Two Dipolar Copolymers Containing Hole-Transporting Unit and Alq3 Unit
XII. Structural Health Monitoring
Aircraft Wing Inspection Based on Anomalous Wave Propagation Imaging
Damage Detection in Composite Cylindrical Multilayered Shells with Delaminations
Damage Detection of Sandwich Structure Using Time Domain Reflectometry
Detection of Impact Location for Composite Stiffened Panel Using FBG Sensors
Determination of Vibration Source Locations in Laminated Composite Plates Using Lamb Wave Analysis
Development of Sensor Integrated Composite Wing Structure
Structural Damage Monitoring of a Composite Wing Using Multiple Types of Sensors
Temperature Independent Delamination Detection Using Data Normalization
Ultrasonic Inspection of Fiber Reinforced Cement Based Composites after their Exposure to Fire Conditions
XIII. System Integration
Degradation of Volatile Acetone by a Photocatalytic Reactor with TiO2 Coated Sieve
Photosensitization of Dye/TiO2 Thin Films by Using Natural Dye of TCPP
Pt/Zeolite Catalyst for the Treatment of High VOC-Containing Wastewater
XIV. Smart Materials and Structures
Anomalous Change of the Viscosity and the Structure of Sn Melt with Temperature
Characteristics of PP/PET Bicomponent Melt Blown Nonwovens as Sound Absorbing Material
Characterization of the Flexural Behavior of SMP Sandwich Beam
Deployable Process Analysis of Packaged SMP Sandwich Beam
Design and Comparison of Three Kinds of Structures for Fabric Keyboard Switch
Design of Broad Band Radar Absorbing Composite Laminates
Dimeric Liquid Crystalline Epoxy Resins Containing Azo Group: Mesogenic Behavior and Curing with Anhydride
Discovery of High-Performance Organic Non-Linear Optical Molecules by Systematic ‘Smart Material’ Design Strategies
Effect of Dent on Self-Sensing Method of CFRP
Electromagnetic Shielding Effectiveness and Manufacture Technique of Functional Bamboo Charcoal/Metal Composite Woven
Evaluation of Fracture Toughness of Ceramic-Metal Functionally Graded Materials
Evaluation of the Preparation and Biocompatibility of Poly(vinyl Alcohol)(PVA)/Chitosan Composite Electrospun Membranes
Fabrication of Novel Wound Dressing
Investigation of Microstructure, Electrical and Optical Properties of WO3 Film by RF Magnetron Sputtering with Ar/H2
Investigations on a Smart Nano-Energy Absorption System
Magnetic Circuit Simulation for Magnetorheological (MR) Fluids Testing Rig in Squeeze Mode
Magnetic Field Activation of Thermoresponsive Shape-Memory Polymer with Embedded Micron Sized Ni Powder
Magnetic Field Actuation of Shape Memory Nanocomposites
On the Generated Heat at Advancing/Receding of Water on Surface Engineered Nanoporous Silica
Phase Transformation in Ni-Ti Shape Memory and Superelastic Alloys Subjected to High Pressure Torsion
Porous CuAlMn Shape-Memory Alloys with Controlling Porosity and Pores’ Structural Parameter Produced by Sintering-Evaporation Process
Research on the Cement-Based Smart Lost-Circulation Control Material with Ti-Ni SMA
Simulation of Actuation and Sensitive Capability of 1-3 Cement Based Piezoelectric Composites
Study on the Two-Way Shape Memory Characteristics Induced by Compressive Loading Cycles
Vibration Control of the Composite Wing Model Using Piezoelectric Actuators
XV. Tribology (Surface Engineering)
Effect of Ceramic Fillers on Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites: A Comparative Study
Effect of Phosphate and Nitrate Electrolytes on Growth of Ceramic Coatings on 2021 Al Alloys Prepared by Electrolytic Plasma Processing
Investigation on Two-Body Abrasive Wear Behavior of Tungsten Carbide Filled Glass Fabric-Epoxy Hybrid Composites
Investigations on the Influence of Molybdenum Disulphide on Tensile and Dry Sliding Wear Characteristics of Nylon 66/Carbon Black Composites
Nd-YAG Laser Surface Melting of Aluminum Alloy 6013 for Improving Stress Corrosion Cracking Resistance
Solid Particle Erosion of UHMWPE Filled Aramid Fabric-Epoxy Hybrid Composites
Study on the Wear-Resisting Property of Wood Cu/Ni Electroplate Coating
Tribological Effects of Nano-Copper with Different Diameters in Lubricants
Tribological Properties of the Ceramic Coatings Prepared by Plasma Electrolytic Oxidation (PEO) on the Al6061 Alloy
XVII. Materials for Fuel Cells and Solar Cells
Behaviors of Metal Nano-Particles Prepared by Coaxial Vacuum Arc Deposition
Characterization of Polyethylenetarepthalate (PET) Based Proton Exchange Membranes Prepared by UV Radiation Induced Graft Copolymerization
Classification of Glassy and Polymer Electrolytes for Lithium-Ion Batteries by the Bond-Strength-Coordination Number Fluctuation Model
Effect of Carbon Fillers on the Performance of a Composite Bipolar Plate for Fuel Cells
Metal Supported SOFC on the Gradient Permeable Metal Foam Substrate
Preparation and Characterization of Porous Si/Carbon Fibers
Preparation and Characterization of Radiation Grafted Proton Exchange Membranes of LLDPE
Preparation of Primary-Amine Functionalized Poly(2,5-benzimidazole) Membrane for Fuel Cells
Synthesis and Electrochemical Performance of Porous Carbon/Carbon Electrode with Core/Shell Structure
Testing the Applicability of an Expression for the Non-Arrhenius Ionic Conductivity in Solid Electrolytes
Thermal Properties of Epoxy Based Expanded Graphite Composite for Bipolar Plate of Polymer Electrolyte Fuel Cells
XVIII. Natural Fiber Composites
Assessment of Extruded Wood Plastic Composite Decking Materials
Comparative Study of Polypropylene Matrix Reinforced with Date Palm Fibers & Date Palm Twigs
Durability of Broken Concrete Specimens Strengthened with CFRP Sheets
Effect of Heat Treated Sisal Fiber on Physical Properties of Polypropylene Composites
Effect of Oxidizing Agents on Thermo-Mechanical Behavior of Jute Fabric-Reinforced Polypropylene Composites
Effects of Temperature and Load on Wear for Different Matrix and Fibre-Reinforced Composite Materials
Effects of Thermal Shock on Mechanical Properties of Bamboo/PBS Green Composites
Effects of Weave Type and Fiber Content on Physical Properties of Sisal Fiber/Epoxy Composites
Evaluation of Castor Oil Polyurethane Reinforced with Lignin and Cellulose from Sugarcane Straw
Experimental Evaluation for Mechanical Property of Unidirectional Banana Reinforced Polyester Composites
Fully Degradable Jute Fiber Reinforced Polylactide Composites Applicable to Car Interior Panel
Interfacial Optimization of Lyocell Fabric/PLA with Silane Treatments
Lyocell Fiber Reinforced Polypropylene Composites: Effect of Matrix Modification
Mechanical and Biodegradation Behavior of Natural Fiber Composites
Mechanical Properties of Polylactic Acid and Natural Rubber Blends Using Vetiver Grass Fiber as Filler
Mechanical Properties, Morphological Properties, and Cure Characteristics of Sisal Fiber/Natural Rubber Composites: Effects of Fiber and Compatibilizer Content
Natural Fiber Reinforced Polystyrene Matrix Based Composites
Optimization of Deposition Conditions for CNTs/Carbon Fiber Hybrid Multiscale Composites via Taguchi Method
Preparation and Characterization of Cellulosic Fibre-Reinforced Polypropylene Foams
Properties of Esterificated Wood with Oxalic Acid and Cetyl Alcohol
Study of Characteristic of Vetiver Fiber Before and after Alkaline Treatment
Study on Mechanical Properties of Wood Fiber/Polypropylene Composites
Thermal Properties of Polypropylene Composites Reinforced with Different Vegetable Fibers
Use of Lignocellulosic Components of Sugarcane Bagasse to Obtaining Polymeric Composite Membranes
XIX. Others
A Comparative Study of Electrical Switching Behavior of Certain Tellurium Based Chalcogenide Thin Films for Phase Change Memory (PCM) Applications
Effect of Si on the Mechanical Properties of WC-Ni Hard Metal
Effect of Silica Size on the Thermal, Mechanical and Biodegradable Properties of Polylactide/Silica Composite Material Prepared by Melt Blending
Effects of Solution Treatment on the Microstructure and Properties of 7003 Aluminum Alloy
Evaluation of Composites Containing Hollow Ni/Fe-Co Fibers on Near-Field Electromagnetic Wave Absorbing Properties
Excessive Iron Source on the Structural and Electrochemical Properties of LiFePO4/C Composite
Fibre-Fibre Hybrid Composites for Aerospace Applications
Fluorescence Properties of Pr3+ Doped Calcium Fluoroborate Glasses
Fractal Carbon Films Prepared by Chemical Vapor Deposition
Lead Oxide Plate Precipitates from Lead Nitrate Solution
Moisture Management Performance of Multifunctional Yarns Based on Wool Fibers
Preparation and Characterization of Blends Derived from Waste Polypropylene and Crumb Rubber Powder
Preparation and Corrosion Protection Effect of Electroactive Polyurethane Containing Amino-Capped Aniline Trimer
Preparation, Characterization and Thermal Properties of Green Polypropylene/Intumenscent Flame Retardant Composites
Studies of Natural Rubber Grafted with Acrylic Monomers
Study on Synthesis and Performances of Casein Resin Grafting Modified by Caprolactam/Acrylic Esters/Vinyl Acetate/Organic Silicone
Surface Preparation Based on the Corrosion Behavior of on the Austenite Stainless Steel 304
Thermally Stable Polyimide/Silica Hybrid: Synthesis, Characterization and Optical Nonlinearity
ß-PbO Plate Films Deposited on Cathode by Electrochemical Deposition
Optical Characterization of Eu3+ and Tb3+ Ions Doped Zinc Lithium Borotellurite Glasses
Study on Sodium Montmorillonite Modified by Diallylmethyl Alkyl Ammonium Bromide
Study on Modified Rapeseed Oil/Montmorillonite Nanocomposites
Preparation of Flower-Like Silica Microstructures
