Buch, Englisch, 650 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1300 g
ISBN: 978-3-03785-463-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Festigkeitslehre, Belastbarkeit
- Naturwissenschaften Physik Mechanik Klassische Mechanik, Newtonsche Mechanik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Werkstoffprüfung
Weitere Infos & Material
Preface and Committees
A Grain Boundary Formulation for the Analysis of Three-Dimensional Polycrystalline Microstructures
Comparisons of High-Temperature Structural Analysis Results on the Medium-Scale PHE Prototype under the Steady-State and Trip Conditions of a Small-Scale Gas Loop
Effect of Niobium Film on Corrosion Resistance of AZ91D Magnesium Alloy
The Measurement of Mechanical Properties of Thermal Barrier Coatings by Micro-Cantilever Tests
Crack Growth by Dimensional Reduction Methods
Nondestructive Evaluation of Polyurethane Materials Using Transient Thermography
Numerical Modelling of Particulate Composite with a Hyperelastic Matrix
Fracture Toughness of PIR Foams Produced from Renewable Resources
Modelling of Discontinuous Environment
Influence of Finite Element Modeling Choices in the Assessment of Stress Concentrations at Fatigue Prone Locations in Orthotropic Bridge Decks
Numerical Analysis of Femoral Neck Angle Influence on Stress Distribution of Cemented Austin Moore Hip Prosthesis
Advanced Natural Stitched Composite Materials in Skin-Stiffener of Wind Turbine Blade Structures
Interfacial Shear Strength of Carbon Fiber Reinforced Polypropylene
Effect of Surface Treatment on Creep Property of Jute Fiber Reinforced Green Composite under Environmental Temperature
Micro-Scale Cantilever Testing of Linear Elastic and Elastic-Plastic Materials
The Influence of the Epoxy Interlayer on the Assessment of Failure Conditions of Push-Out Test Specimens
Fracture and Damage Characterization of Natural Fiber Composites
Modeling of Damage and Failure of Dual Phase Steel in Nakajima Test
Micromechanical Modeling for the Evaluation of Elastic Moduli of Woven Composites
Characterization of Metal Magnetic Memory of Thermal Damage Correlated with Initial Cumulative Fatigue Damage for Laser Cladding Remanufacturing Technology
SEM In Situ Study on Pre-Corrosion and Fatigue Cracking Behavior of LY12CZ Aluminum Alloy
Analysis of Stress Intensity Factor for Cracked Flattened Brazilian Disk: Part I – Analysis Method and Pure Mode I Crack
Analysis of Stress Intensity Factor for Cracked Flattened Brazilian Disk: Part II – Mixed-Mode Crack
Thermo-Mechanical Stress near Apex of a Bi-Material Wedge by a Novel Finite Element Analysis
Simulation of Spall Fracture Based on Material Point Method
Buckling Reliability Analysis for the Cylindrical Shell with Initial Defects
To Research Residual Stress Using Finite Element Analysis
Numerical Simulation of Underwater Explosion Based on Material Point Method
Numerical Simulation of Fatigue Behavior of Honeycomb Sandwich Panels
The Debond Fracture of Sandwich Plate with Corrugated Core Using Cohesive Zone Element
Study on a Numerical Calculation Method of Fatigue Behavior in Glare Panel
Investigation of Residual Stress Distribution in Clad 2024 T3 after Laser Peening
Investigation on the Corrosion Effect of Friction Stir Welded AA2024 T3 Aluminum Alloy Joints
Distortion Induced Fatigue Analysis of Steel Bridges
Material Properties and Fatigue Safety Evaluation of Old Metal Bridges
Damage Monitoring and Evaluation Using AE Sensors for Existing Concrete Bridges
Repair and Service Safety Evaluation of a Fire Damaged Concrete Bridge
Scaling Effects on the Tensile Strength of Fibrous Composites
Analysis of Fatigue and Cumulative Damage Characteristics for Concrete in Freezing-Thawing Environment
Residual Fatigue Life Analysis of Submarine Pressure Structure Based on Probabilistic Fracture Mechanics
Geometrical Parameters Influencing a Hybrid Mechanical Coupling
Fatigue Test of Small Sized AZ31 Magnesium Alloy Using Micropillar Specimen
Fatigue Behavior of A356 Cast Aluminum Alloy Microstructurally Modified by Friction Stir Processing under Low Strain Rate Condition
Load Influence on the Behavior of Micro-Crack in the Particulate Composite
Pressure Pipe Damage: Numerical Estimation of Point Load Effect
Quasi-Static Simulation of Crack Growth in Elastic Materials Considering Internal Boundaries and Interfaces
Deterioration of FRC Plate due to Explosion and Change of Temperature
Monitoring Fatigue Cracks and Stress Intensity Factors Based on the Distributed Dislocation Technique
Computational Characterization of Micro-To Macroscopic Deformation Behavior of Double Network Hydrogel
Multilevel/Multiobjective Design of Composite Structures
The Role of Grain Size on Deformation of 316H Austenitic Stainless Steel
Experimental Investigation of the Influence of the Bond Conditions on the Shear Bond Strength between Steel and Self-Compacting Concrete Using Push-Out Tests
Experimental Study of the Influence of the Initial Notch Length in Cubical Concrete Wedge-Splitting Test Specimens
Micro-Analyses of Small Cracks in 6061-T6 Aluminium Alloy Subjected to High-Cycle Fatigue
Fatigue Properties of Solution-Treated Type 304 Stainless Steel after Nitriding
Fatigue Crack Growth of Alloy 7050-T7451 Plate in L-S Orientation
Structural Design and Finite Element Analysis of Composite Wind Turbine Blade
Determination of Intensity Factors for Interfacial Cracks in TIP Materials
Failure of Composite T-Joints in Bending with Through-the-Thickness Reinforcement: Stitching Vs Z-Pinning
Investigation on T11-Stress for Semi-Elliptical Surface Cracks in Finite Thickness Plates under Remote Tension
Investigation of Thermal Damage and the Consequent Fatigue Property of Laser Surface Heat Treated Component
A 3-Dimensional Model Related to Stress-Strain-Time of Rock Salts
Experimental Research on Interlaminal Shear Strength of GFRP Bridge Decks under Simulated Concrete Environment
Vibration Fatigue Behavior of 2024-T62 Aluminum Alloy Cantilever Beam under Different Vibration State
Simulation of Pylon Emergency Break-Away of Large Commercial Aircraft
Dynamic Mechanical Behavior of Two Fiber-Reinforced Composites
Numerical Simulation of Compression-After-Impact Process of Composite Laminates
Deposition Process and Interface Properties of Electro-Thermal Explosion Sprayed WC/Co Coating
Grain-Boundary Segregation of Phosphorus and Inter-Granular Fracture Behavior under Low Tensile Stresses
Effect of the Neodymium Content on Mechanical Properties of the Electro-Brush Plated Nano-Al2O3/Ni Composite Coating
FE Simulation Methods to Predict Welding Residual Stresses
Study on the Pin-Load Distribution of Multiple-Bolted Composite to Metal Joints
The Sensitivity of the Foam-Core Parameters under Impact Loading
Dynamic Anti-Plane Behaviors on Two Dissimilar Piezoelectric Media with an Interfacial Non-Circular Cavity
Analysis of Crack Tip Field in Materials with Creep Behavior
The Conservation Laws and Path-Independent Integrals for Piezo-Magnetic Media
Scattering of Anti-Plane SH-Wave by Multiple Cylindrical Inclusions in Elastic Semi-Space
Multiscale Simulation of the Size Effect of Nano-Indentation
J-Integral and its Dual Form Based on Finite Deformation Theory
Study on the Diffusion Coefficient in NGS under Low Tensile Stress
Pressureless Sintering and Properties of Boron Carbide-Titanium Diboride Composites by In Situ Reaction
Galvanic Corrosion of Titanium/Cu-Ni Alloy/High Strength Steel Multiphase Material System in Seawater
Wear Failure Behavior of Steel Surface with Palygorskite Powders as Lubricant Additives
Fatigue Assessment of Trimaran Structure Based on Simplified Procedure
A Comparative Study between Steel Grillage and SPS Stiffening Plate Based on FEA Eigen Value Analysis
Yield Criterion and Crack Tip Plastic Zone of Nickel-Based Single Crystal
Interaction of Elliptical Inclusion and Crack in Half-Space under SH-Waves
Influence of Welding Conditions on Residual Stresses of Multi-Pass Tube Sheet Welds
Study on Mode I Quasi-Static Growing Crack in a Rigid-Viscoelastic Material Interfacial Crack
Analysis of Interface Deformation of Steel-Concrete-Steel Sandwich Beam
Reliability Analysis for Stiffened Plate on the Maximum Entropy Method
An Enhanced Time-Reversal Method for Impact Damage Monitoring on Plate-Like Structures
Experimental Study on Residual Strength of Panels with Multiple Site Damage
Damage Analysis of 2D Woven Composite Laminates Containing an Open-Hole under Tensile Loadings
A New Approach to Determine Dynamic Strength Model Parameters under Taylor Impact Test
A Novel Testing Method for Measuring Through-Thickness Properties of Thick Composite Laminates
Numerical Simulation of Compressive Residual Strength for Damaged Composite Laminates
A Research on Characterization for Damage Tolerance of Composite Laminates
The Simulation of Low-Velocity Impact on Composite Laminates with the Damage Model Based on Strain
Investigation into Damage of Stainless Steel Mesh/ALPlate Multi-Shock Shield under Hypervelocity AL-Spheres Impact
Numerical Simulation of Hypervelocity Impact on Mesh Bumper Causing Fragmentation and Ejection
Analysis of Crack Arrest by Electromagnetic Heating in Metal with Oblique-Elliptical Embedding Crack
Effect of Characteristic Parameters of Exponential Cohesive Zone Model on Mode I Fracture of Laminated Composites
Extended Finite Element Method for Fracture Mechanics and Mesh Refinement Controlled by Density Function
Effects of Surface Roughness on the Fatigue Life of Alloy Steel
Correlation between Alternating Temperature Accelerated Aging and Real World Storage of Composite Propellant
Experimental Research on Fracture Toughness of High Grade Line Pipe
Stress-Strain Analysis of Composite Propellant under Cyclic Temperature Loads
Damage Detection for Structural Health Monitoring Using Ultrasonic Guided Waves
The Research on Wood Fiber/Stainless Steel Net Electromagnetic Shielding Composite Board
Low Cycle Fatigue Behaviors of TI-6AL-4V Alloy Controlled by Strain and Stress
Analysis of Stress Singularity near the Tip of Artificial Crack
An Evaluation on the Restrained Shrinkage of Ultra-High Performance Concrete
Structural Strength Evaluation of a Stainless Railroad Car
Study of the Characteristic of Composite Sandwich Panel with Cut-Out under Compression Load
Size Effect of PHE Prototype on High-Temperature Structural Integrity
High-Temperature Structural Analysis on the Small-Scale PHE Prototype
Characterization of Ductile Failure Behavior of the Ferritic Steel Using Damage Mechanics Modeling Approach
Thermal and Static Analysis of an Insulation Block from Recycled Polymer HDPE for Solution of Thermal Bridges in Wall-Footing Detail
Diagnosis of Damage in a Steel Tank Model by Shaking Table Harmonic Tests
Numerical Analysis of a Steel Frame Building with Soft-Storey Failure under Ground Motion Excitation
Relation between Structural Size and the Discretization Density of Brittle Homogeneous Lattice Models
Matching Asymptotic Method in Propagation of Cracks with Dugdale Model
Formability Evaluation of Non-Crimp Carbon Fabric by Non-Contact 3D Deformation Measurement System
Modelling Micro-Damage in Granular Solids
Load and Environmental Effects on the Corrosion Behavior of a Ti6Al4V Alloy
Fatigue Crack Nucleation and Growth Mechanisms for Ti6Al4V in Different Environments
Modeling Delamination of Interfacial Corner Cracks in Multilayered Structures
Crack Modelling Using the Material Point Method and a Strong Discontinuity Approach
Numerical Simulation of Crack Tip Behavior under Fatigue Loading
Delamination Threshold Load of Composite Laminates under Low-Velocity Impact
Inelastic Seismic Behavior without and with Over-Resistance Effects of 10-Story Building RC Damaged due to the 1985 Earthquakes in Mexico City
Accurate Description of Near-Crack-Tip Fields for the Estimation of Inelastic Zone Extent in Quasi-Brittle Materials
Application of the Mesh Superposition Technique to the Study of Delaminations in Composites Thin Plates
Deterministic and Probabilistic Earthquake Scenarios for the Seismic Risk Analysis of URM Buildings
Micromechanics Damage Analysis in Fiber-Reinforced Composite Material Using Finite Element Method
On the Direction of a Crack Initiated from an Orthotropic Bi-Material Notch Composed of Materials with Non-Uniform Fracture Mechanics Properties
Fracture Behaviour of Thin Sheet Stainless Steel
Transient and Steady State Regimes of Fatigue Crack Growth in High Strength Steel
Estimation of Shear Behavior of Ultra High Performance Concrete I Girder without Shear Stirrups
A Local Compression Tests of UHPC Anchor Blocks for Post-Tensioning Tendons
Impact Identification in Composite Stiffened Panels
Electro-Mechanical Impedance Technique for Structural Health Monitoring of Composite Panels
Dynamic Response Analysis of Lining Structure with Primary Defects for Tunnel under Moving Train Loading
Monitoring Analysis of Tunnel Construction in a New Subway Line Down-Through an Existed Line
SMART Platform for Structural Health Monitoring of Sensorised Stiffened Composite Panels
Micromechanical Characterisation of Microstructure in Weld Heat Affected Zone of Structural Steel
Two Scale-Based Continuum Damage Model for Brittle Materials under Thermomechanical Loading
The Applicability Study on the FRP-Concrete Composite Bridge Deck for Cable-Stayed Bridges
Improvement of Fatigue Crack Growth Behavior in the Case of the Cracked Specimen with Relatively Narrow Width
Dynamic Crack Problems Using Meshless Method
Investigation of Damping Characteristics of Metals by the Use of Inverted Torsion Pendulum Method
Mechanical Characteristics of Bamboo
Relationship between Crack Extension Behavior and Fatigue Life of C/C Composites
Influence of Adhesive Layer on Actuation of Lamb Wave Signals
Evaluation of Setting Time in Ultra High Performance Concrete
