Selected, peer reviewed papers from the 2nd International Conference on Energy, Environment and Sustainable Development (EESD 2012), October 12-14, 2012, Jilin, China
Buch, Englisch, 1900 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3500 g
ISBN: 978-3-03785-549-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Geowissenschaften Umweltwissenschaften Bauökologie, Baubiologie
- Technische Wissenschaften Technik Allgemein Nachhaltigkeit, Grüne Technologien
- Technische Wissenschaften Bauingenieurwesen Bauökologie, Baubiologie, Bauphysik, Bauchemie
- Technische Wissenschaften Energietechnik | Elektrotechnik Alternative und erneuerbare Energien
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
Theoretical Study on Solar-Driven Air-Cooled LiBr/Water Absorption Refrigeration System
Benefit Assessment of Solar Photovoltaic Industry in China
Calculation and Experiment Research of Improving Generated Energy in Grid-Connected PV Power Station Based on Manual Adjustment of Angle
A Closed-Loop Temperature Control System for the Solar Energy Heat Collector
Influences of Solid Particles on Photo-Thermal Performance of Heat Conduction Oil under Solar Irradiation
The Simulation Research of the Five Level Photovoltaic Grid-Connected Inverter Based on Repetitive and PI Control
The Research of Control Strategy for Three-Phase Photovoltaic Grid-Connected VSI Using Space Vector Pulse Width Modulation and P-Q Theory
A New Model for Computing Daily Global Radiation of Lanzhou, China
Analysis of Current Situation and Countermeasure of Solar Energy Photovoltaic Power Generation in Beijing
Forecast of China's PV Application System with GM (1, 1) Model
Voltage Control Method Research of PV Power System Based on Small Signal Model
Research on Steric and Multilevel Concentrator for Photovoltaic Generation
A Solar Automatic Tracking System Design Based on FPGA
A Study on the Solar-Thermal Performance in PV/T System
Study on Relevant Policies of Solar Photovoltaic Technology in China
Solar Cell MPPT Technique Based on PI Controller
Direct Thermoelectric Microgeneration Using Residual Heat of Photovoltaic System
Photovoltaic Power Generation Transient Modeling and Identifiability Analysis
The Review of Photovoltaic Power Generation Technology
Practical Model Educed and Simulation of Photovoltaic Power System
Application of BP Neural Network to Short-Term-Ahead Generating Power Forecasting for PV System
Study on the Power Generation Data of High-Power BIPV Grid-Connected PV Power Station
The Analysis of Chinese Photovoltaic Industry with SWOT Model and AHP Method
Design and Calculation of Cooling System to Eliminate Non-Uniform Heat Transfer on Concentration PV System (CPV)
Global Utilization of Solar Energy and Development of Solar Cell Materials
The Design of Embedded PV Inverter Grid-Connected System
Study on Different Capacity of Photovoltaic Power Generation Project Compares
The Control Strategy and Simulation of Three-Phase Grid-Connected Photovoltaic System
Economic Analysis for Solar Hybrid Power of Ocean-Going Fishing Vessels towards Low Carbon
The Simulation Research of Maximum Power Point Tracking Based on Asymmetric Fuzzy-PI Control for Photovoltaic Grid-Connected System
Photovoltaic Arrays MPPT Based on Improved Incremental Conductance Method
SWOT Analysis on Chinese Photovoltaic Industry
Performance Evaluation of a Dual-Function Solar Collector Integrated with Building in Water Heating Mode
Bionic Study on Structural Solar Absorption Materials Based on Microstructure Pattern of Butterfly Scales
Model and Analysis of the Output Characteristics of Photovoltaic Module
Chapter 2: Development and Utilization of Biomass Energy
Steam Gasification for Biomass Tar with Natural Ores of Limonite and Dolomite
Solid- Alkali Catalyst of Mussel Shell Used in Producing Biodiesel
Thermodynamics Simulation of Ethanol Synthesis via Biomass Gasification
Erosion in the Rectangular Biomass Circulating Fluidized Bed
The Study on Comprehensive Utilization of Liquefied Natural Gas
Research Progress in the Bio-Oil Hydrotreating Process
Effect of Temperature on Dry Anaerobic Fermentation of Animal Manure and Straw
Study on Combustion Adjustment Characteristics of 50MW CFB Biomass-Fired Boiler in Zhanjiang Biomass Power Plant
Application of Bioenergy in Sweden and its Revelation to China
Logistics Cost Optimization for Straw Biomass Supply and its Application in Heilongjiang Province, China
Application Status and Development Strategies of Biomass Energy in China
Overview of Methods to Remove Solid Particles from Biomass Fast Pyrolysis Oils
Influence of Micro-Emulsified Biodiesel on Combustion and Emission Characteristics of a Turbocharged Diesel Engine
Study on the Emission Properties of Biodiesel Fueled on Medium-Sized Diesel Engine under Steady Working Conditions
Fuel Ethanol Production from Lignocellulosic Biomass Using a Recombinant Yeast Strain
Rational Use of Residential Digesters for Sewage Treatment with Carbon Credits
Optimization of Dilute Acid Hydrolysis of Corn Stover for Separate Production of Xylose and Glucose by Response Surface Methodology
Hot Utilization of Fuel Gas in Fluidized Bed Biomass Gasification
The Research on Influence of Intensive Straw-Gasifying on Household Energy Consumption in the Countryside
Establishment of a Suspension Cell System for Transformation of Jatropha curcas Using Nanoparticles
Non-Woven Operational Stability of Dynamic Membrane Bioreactor and its Fluence Factors
Estimation of Viscosity of Biodiesel-Diesel Blends with near Infrared Spectroscopy
Aqueous Extraction of Chinese Tallow Seeds Oil
Optimization of Multi-Enzyme Hydrolysis Process for Efficient Corn Gluten Meal Hydrolysis
Development of Straw Briquette Boiler
Producing Biogas with Two-Stage Fermentation Process of High Total Solids Content Kitchen Wastes
The Effect of Support on the Catalytic Performance for Bio-Oil Upgrading
Economic Analysis Model for Biopower Plants Based on Biomass Logistics Networks and its Application in Heilongjiang Province, China
The Study of Heating Value and Rate of Return of Biogas Production in King Mongkut’s University of Technology North Bangkok (Prachinburi Campus)
Textural Characteristics of Coconut Shell-Based Activated Carbons with Steam Activation
Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts
Preparation and Properties of Starch-Based Coal Gasification Catalyst
Analysis of Char Specific Surface Area and Porosity from the Fast Pyrolysis of Biomass and Pulverized Coal
A Preliminary Study on DeNOx Technologies for Biomass Power Plant
The Experimental Study of the Influence of Mg-Based Additives on Wheat Ash Melting Point
Experimental Study on Potential of Biogas Fermentation with Lily Straw
Syngas Production from Biomass: A Review
Biodiesel Production from a Novel Raw Material Tung Oil
The Exploration and Practice of Using Additive to Inhibit the Heating Surface Deposition in Biomass-Fired Boiler
Anaerobic Fermentation of Cow Dung — Effect of Solid Concentration and Temperature on Biogas Quality
Catalysts in Biomass Pyrolysis: A Brief Review
Data Analysis and Temperature Compensation of Laser CH4 Detection System
Effect on Different Modes to Ethanol Fermentation of Energy Beet
Existing Problems and Countermeasures in the Development of China’s Biomass Energy Industry
Recent Progress in Biomass Tar Catalytic Cracking Method Research
Sapium Sebiferum(Chinese Tallow), a Promising Energy Plant for Green Diesel(hydrocarbon Fuel)
The Economical and Technological Analysis of Straw Cogeneration in Northeast China
Chapter 3: Development and Utilization of Wind Energy
A Review on the New Structure of Savonius Wind Turbines
The Method of Suppress the Output Power Fluctuations of Off-Grid Wind Power Systems
Design of Direct-Driven Type Wind Power Generation Experimental Platform System
Hybrid Energy Storage System to Stabilize the Power Fluctuation of Wind Power
Comparison of the Frequency Control Strategy of Wind Turbines and its Optimization Scheme
An Overview of Fire Risk and Fire Protection Solutions for Wind Turbines
Effect of Coherence Function on Rotational Fourier Spectrum of Wind Turbine
Analysis and Control of Maglev Flywheel Rotor in the Wind Generator
Safety Design of Wind Turbine’s Mobile Low Voltage Ride through Test Device
Research on early Fault Prediction of Wind Turbine Gearbox
High Power Rate Wind Turbine Converter Technology
An Investigation of the Low Voltage Ride through Function of GE DFIG Wind Turbines for Electro-Mechanical Simulations
Study on Characteristics of Wind Power Output in Jing-Jin-Tang Grid
Study of Wind Power Forecasting Assessment Standard Based on Unit Commitment and Spinning Reserve Optimization Model
Low Voltage Ride-through Analysis and Control for Doubly Fed Wind-Power Induction Generator Using Finite State Machine Method
Research on Development of Wind Power Grid Integration in China
Comparison of the Extreme Learning Machine with the BP Neural Network for Short-Term Prediction of Wind Power
Analyses on Integration of Wind Power into Gansu Power Grid
Study on Reactive Power Compensation of Single Wind Farm
Study on the Influence of DFIG Units with Additional Frequency Control on Power System Emergency Control
Global Utilization and Development of Wind Energy
Research on Reliability Assessment of Power System with Wind Farms
Impact on Transient Angle Stability with DFIG-Based Wind Generation Connected to Power System
Small-Capacity Experimental Prototype of VSC-HVDC for Offshore Wind Farm
Dynamic Evaluation of Wind Turbine Health Condition Based on Multi-Source Information Fusion
Analysis Model of Wind Power Cost Based on Two-Factor Learning Curve
Control Strategy of Wind Power Converter under Unbalanced Grid Voltage Condition
The Crucial Issues in Low-Level Wind Predicton that Used for Wind Energy Forecasting
Wind Power Forecasting Using Wavelet Decomposition and Elman Neural Network
High Voltage Ride through of PMSG-Based Wind Turbines
Predictive Condition Monitoring and Fault Diagnosis Techniques for Offshore Wind Turbines
Study on the Influence of Wind Power to the Power Supply Side with Consideration of CO2 Emission Reduction
Influence of Wind Turbine Aero-Elastic Load on Dynamic Response of Floating Platform
Improvement of Transient Voltage Stability of the Wind Farm Using SVC
Design of Icing Prober Configuration for Horizontal Axis Wind Turbine
MPPT of Doubly-Fed Induction Generator in Wind Farm Using SPSA Algorithm
Overview on Key Technologies of Grid-Connected Wind Power Based on Energy Storage
A Review of Condition Monitoring and Fault Diagnosis of Wind Turbine Gearbox Using Signal Processing
Very Short-Term Wind Speed Prediction of a Wind Farm Based on Artificial Neural Network
Using the Particle Swarm Optimization Model to Evaluate the Wind Power Enterprise Development Ability under Low-Carbon Economy Environment
The Low Voltage Ride through Simulation Analysis for Wind Turbines to Grid
Evaluation of Low-Level Winds from WRF Model that Driven by Different Background Field Data with Applications to Wind Energy Forecasting
Aerodynamic Design and Finite Element Modelling of Mixed Aerofoil Wind Turbine Blades
FLUENT-Based Numerical Simulation of Fan Blade of the Scenery Tower Power Generation Device
Research on Wind Power Industry Development in Xinjiang
A Dynamic Growth Model of Wind Power Optimal Investment Paths
The Influence of Rotor Arrester on Low Voltage Ride through Behavior of Doubly-Fed Induction Generator
An Optimal Operation Scheduling for Wind Farm with Storage and Forecasting
A Novel Emergency Power Supply Unit in MW Wind Turbine Electric Pitch System
MPPT of Wind Energy Conversion System Based on Fuzzy Control
Research of Embedded Control System of DFIG Wind Generation
Reliability Assessment of Wind Power System Considering Multi-Objective Models
Dynamic Modeling and Simulation of Doubly-Fed VSCF Wind Generator Based on PSCAD/EMTDC
Chosen of Strength Criterion for Different Region of Blade
Modeling and Simulation of the Impact of Wind Power Integration on Power Market Based on System Dynamics
Short-Term Wind Speed Combination Prediction Model of Neural Network and Time Series
Research on Single Neuron Adaptive PID Control for MPPT of Wind Power System Using Switched Reluctance Generator
Analysis of Aerodynamic Performance for Wind Turbine Based on Amended Calculation of BEM Theory
Summary and Analysis on the Low Voltage Ride through Reformation of the Wind Power Turbine
A Novel Fuzzy Self-Adaption PI Control Method of the Var Compensation of Wind Generator
Adequacy Evaluation of Wind-PV-ES Hybrid Power System
Study on the Active Power Output Control of Wind Energy for Power Balance
Practical Calculation Method of Downburst Wind Profiles for Engineering Applications
Design and Implementation of Wind-Solar Hybrid Street Light Management System Based on ZigBee
Short-Term Wind Speed and Power Prediction Using Fuzzy Information Granulation-Support Vector Machine
Analysis on Operation Characteristics of Wind Source Heat Pump System
Chapter 4: Nuclear Energy and Nuclear Engineering
Assesment of Quality Classification of Green Pellets for Nuclear Power Plants Using Improved Levenberg-Marquardt Algorithm
Design on Optimization Database of Radiation Protection for Nuclear Facilities Maintenance
Parallel Particle-Grid Hybrid Method for Nuclear Power System Accident Analysis
The MSIV Closure Direct Scram Transient Analysis of Lungmen ABWR Using TRACE/PARCS
The Human Reliability Analysis in Level 2 PSA Using SPAR-H Method
Chapter 5: Hydrogen, Fuel Cell and Related Technologies
Synthesis and Properties of Self-Crosslinking Anion Exchange Membranes Based on Quaternary Poly(arylene Ether Sulfone)s
Studies on the Crosslinked Multiblock Sulfonated Poly(arylene Ether Sulfone) Membranes for Fuel Cell Applications
The Study of Surface Modification 304 Stainless Steel in Simulated PEMFC Environments
Preparation and Electro-Catalytic Performance of Pt-Ag/C as Electro-Reduction Catalysts for H2O2
Parameters Optimization of Two-Phase United Anaerobic Fermentation Hydrogen-Methane Production
Manufacture New Catalyst PtCuCeOx for Fuel Cells by IBS and Modified by Post-Processing
Effect of PH on the Performance of the Anode in Microbial Fuel Cells
Study on the Progress of the Foreign Security Fuel
The Effect of Appending of I-,Fe2+ and MnO4- to the Electro-Oxidation of Methanol on Platinum Electrode
Design and Simulation on Polymer Electrolyte Membrane Fuel Cell Bipolar Plates with Hilbert Patterns
Advanced Hydrogen Storage Technique to Improve the Run Time of the “Chip Integrated Micro PEM Fuel Cell System”
Preparation and Performance of La0.7Sr0.15Ca0.15Co1-xFexO3-d as the Cathode Material for SOFC
Microstructures and Electrochemical Properties of La0.7Ce0.3Ni3.7Co0.7-xAl0.2Mn0.4(Fe0.43B0.57)x (x = 0-0.4) Hydrogen Storage Alloys
Synthesis and Properties of Anion Exchange Membranes Derived from Quaternary Poly(ether Sulfone)s
Chapter 5: Hydrogen, Fuel Cell and Related Technologies
Enhanced Electrocatalytic Activity of Ni-B-Graphene Electrode for Direct Methanol Fuel Cell Applications
Experimental Research on Combustion and Emission Performance for Micro Combustor of MTPV System with Stratified Porous Media
Preparation and Properties of Ni-Doped Ce0.85Sm0.15O1.925 Ceramics for Use as Electrolytes in IT-SOFCs
Electrooxidation of Methanol on Ru/Pt Film Bimetallic Electrode as Probed by In Situ ATR-SEIRAs Study
Cost Comparison of Three Hydrogen Production Processes in HFCVs Infrastructure Based on H2A Model
Determining PEMFC Model Parameters with IPSO Algorithm
Chapter 6: Heat Pumps Technology
Energy Saving and Emission Reduction in Power Generation Sector for China’s Heat Pump Heating
Application Research on Power Plant Heat Pump Regenerative Thermal System
Experimental Study on the Multiple Energy Assisted Heat Pump
Analysis of Energy and Environmental Benefits about Ground-Source Heat Pump under Heating Conditions in Wuhan Region
The Numerical Simulation of Ground Source Heat Pump
Design and Operation Prediction of Groundwater Heat Pump
Study on Performance of Air Source Heat Pump Water Heater
Groundwater Source Heat Pump Technology Use for Heating and Air-Conditioning of a Commercial Building
Chapter 7: Storage Battery
A Simulated System of Battery Management System Based on SAE J1939 Protocol
Study Progress of Li-Ni-Co-Mn-O System as Cathode Material for Li-Ion Battery
Study on Kinetics Behavior of the Lead Negative Electrode in the Lead Acid Flow Battery
The Study on the Properties of Zinc-Nickel Battery
Electric Vehicle Charging Battery Swap Station Harmonic Generation and Hazard Control
Application Analysis and Capacity Configuration of Battery Energy Storage in Renewable Generation System
Investigation on the Stability of Electrolyte in Vanadium Flow Batteries
Design and Implementation of Distributed Battery Management System
Chapter 8: Energy Storage Technologies
Experimental Study on Heat Storage and Release of the Phase Change Thermal Energy Storage Unit with Bushings between Double Flow
Preparation and Properties of Paraffin/Activated Carbon Composites as Phase Change Materials for Thermal Energy Storage
Application of Cascade H-Bridge Inverter in Super-Capacitor Energy Storage System
The Analysis of the Transient Characteristics of the PV System with Hybrid Energy Storage System
The Application of Super Capacitor in Scenery Generator Energy Storage System
The Battery Management System Applied in Smart Grid Energy Storage System
Graphene and Metal Oxide Composites for Supercapacitors
Research on Maglev Flywheel Energy Storage System for Electric Vehicle
A Compensation Method of Dynamic Voltage Sag Based on SMES
The Capacitive Behavior of Ni0.76Co0.24Ox Xerogels in KOH Solution
Application Analysis of Chilled Water Storage Technology in the Transformation of Central Air Conditioning System
Capacitive Study of Ni(OH)2 Xerogels in KOH Solution
Research on Electric Energy Conversion of Maglev Flywheel Battery
Capacity Optimization of Energy Storage Unit in Distributed Generation System
Research and Develop on Static Frequency Converter of Pumped Storage Power Plant
Control of Battery Energy Storage Power Station for Power Balance
The Experimental Study of Water Storage Performance on Small Heat-Pump Energy Storage Air-Conditioner
Chapter 9: Energy-Saving Technology
Measurement and Verification of Injection Molding Machine Energy-Saving Reformation Effect
Target Values of Combustion Optimization in Coal Fire Boiler Based on Data Mining
A New Type Phase Change Energy-Saving Device for Building Field
Energy-Saving Analysis for Power System Reactive Power Compensation
Feasibility of CCHP System in Certain Large-Scale Public Building
Grey Prediction of WSN Feedback Value in Greenhouse
Experimental Study on Heat Pipe Heat Recovery Type of Fresh Air Ventilator
Energy-Saving Application of Heat Pipe GGH in Wet Flue Gas Desulfurization System
Structural Optimization Design for Metal Honeycomb Used in Continuous Waste Heat Recovery
Investigation on the Condensation Heat Transfer Augmentation by Large Porosity Tube Inserts
Analysis of the Influence of Heater Terminal Temperature Difference on the Cycle Thermal Efficiency
Study on the Behavior Energy-Saving of the Heat Users of Central Heating System
Indirect Evaporative Cooling – An Energy Efficient Way for Air Conditioning
Experimental Study on the Air-Circle Temperature-Rising Technology with the Heat Exchanger
Energy Efficiency Analysis of Beijing Using the DEA-Tobit Two Stage Method
Energy Consumption Analysis of Beer Brewing Process Based on Data Envelopment Analysis
The Simulation Study of Hybrid Compression Garbage Trucks
Optimal Sizing for the CCHP System Based on Software LINGO
A Study on Waste Heat Recovery in Drain Water with Water-to-Water Heat Exchanger in Barbershops
Control Automotive Exhausts and Fuel-Saving by Introducing Improved Detergent Additives
Research on the Heating Plan of Recovering Condensing Heat of Power Plant by Water Source Heat Pump Unit
Research on Energy Consumption for Heating from Implementing “50% Energy-Saving Standard” and “65% Energy-Saving Standard”
Prediction of Airport Energy Consumption Using a Hybrid Grey Neural Network Model
Experimental Investigation on Ignition of Low-Volatile Pulverized Coal in a Tiny-Oil Burner in Oxygen-Enriched Conditions
Optimized Operation of 2×660 MW Piping-Main Scheme Circulating Water System
Analysis of the Auxiliary Steam Header’s Source Selection
The Analysis of Energy Saving in the Process of Producing Mineral Wool: a Case Study in Shanxi Province
Development of a Compact Two-Stage Transmission Line Transformer
Energy Saving Methods by Using Ground Source Heat Pump in Buildings
Study on the Evaluation Method for Energy Saving and Emission Reduction Effect of Power Plant
A Significant Impact Parameter Extraction Method Based on Rough Set Attribution for Reduction Fuel Consumption Estimation
Mathematical Model of the Generated Energy Based on “Ordering Power by Heat”
Analysis of the Impact of Boiler Slag’s Physical Sensible Heat Recovery on the Thermal Economy of Thermal Power Plant
Chapter 10: Energy Materials and Technology
A High Light Response of Silicon P-I-N Detector by an AR Thin Film
A Design Method of Supersonic Separator Used in Natural Gas Liquefaction Process
Effect of Annealing Temperature on Electrical Properties of ZnTe Layers Grown by Thermal Evaporation
Preparation and Properties of PEDOT/PSS Conductive Polymer Blended with Graphene/PVDF
Study on Composite of Porous Si and Disordered Carbon as Anode Materials for Lithium Ion Batteries
Excess Heat Triggered by Electrical Current in a D/Pd Gas-Loading System
Preparation of Silicalite-1 Membranes on a-Al2O3 Tubes and its Concentration Performance of Low Ethanol/water Mixtures
Effect of Synthesis Process of Polyaniline for the Zn-PANi Secondary Batteries
Impact of Substitution of M (M=Mn, Cu) for Ni on Hydriding and Dehydriding Kinetics of as-Spun Nanocrystalline and Amorphous Mg2Ni-Type Alloys
Preparation of PET/PT Composite Film and Study of its Moisture Barrier Properties
Luminescent Layer by Layer Thin Films Based on Polyoxometalate and Poly(amidoamine) Dendrimer
Preparation of Conductive Response Polyaniline/Polyurethane Orderde Array Thin Film
Effects of Annealing in N2 and Air after CdCl2 Treatment on the Properties of CdS Thin Films
Chapter 11: Energy Chemical Engineering and Processes
Offshore Adaptability of the CO2 Pre-Cooling Dual Nitrogen Expander Natural Gas Liquefaction Process
Simulation on Coal Devolatilization Combined a Multi-Step Kinetic Model with Chemkin Software
Preparation of Ni–Cu Bimetallic Catalyst and its Properties for the Direct Synthesis of Acetic Acid from Methanol and Carbon Monoxide
The Influence of Chemical Dispersants on the Properties of Crude Oil
Low Temperature Bleaching of Cotton with a Novel Cationic Activator
Synthesis and Analysis of Ethylene Glycol Methyl Ethyl Ether
Hydrothermal Oxidation of Industrial Alkali Lignin for Producing Small Molecular Organic Acids
Preparation of Y Zeolite-Based Catalysts and their Catalytic Cracking Performances of Venezuelan Heavy Oil
XAS Study on Calcination Effect of Silica Supported Cobalt Catalysts for Fischer-Tropsch Synthesis
Integrated Study on Syngas-to-Synthetic Natural Gas (SNG) Process
Heavy Oil Gathering Process Test Research
The Researches on Upgrading of Heavy Crude Oil by Catalytic Aquathermolysis Treatment Using a New Oil-Soluble Catalyst
The Synthesis of Cross-Linked Poly Aspartic Acid and Study on Control of the Calcium Carbonate Crystal Morphology
Determining the Engine Oil’s TBN by Semi-Derivative Voltammetry
The Effect of Pressure Disturbance on the Formation Process of Propane Hydrate
Modeling Analysis of Shell, Texaco Gasification Technology’s Effects on Water Gas Shift for Fischer-Tropsch Process
Research Impact on Temperature of Polyethylene Gas Pipeline Characteristic
Modeling of an Oil Shale Low Temperature Retorting Process by Using Aspen Plus
The Investigation of Preparing the Beta Zeolite Membrane by the Way of Secondary Growth
Simulation of Fluidized Bed Oxygen Permeable Membrane Reactors for Hydrogen Production from Natural Gas
New Dimensionless Model for CO2 Miscible Flooding in Five-Point Scheme
Catalytic Activity of Dehydrogenation of Methanol to MF over Cu/SBA-15 and Cu-ZnO/SBA-15 Prepared by Grinding and Impregnation
Chapter 12: Energy Security and Clean Use
Risk Assessment on Coal and Gas Outburst Based on TOPSIS Model
Regional Energy Security Evaluation in China Based on Fuzzy Integral Method
The Study of Insulation Monitoring Method for Power Battery Pack
The Model of Load Curtailment Optimization in Power Energy Security Evaluation
Geographic Concentration of Korean Oil Imports and the Implications
Study on the Dynamic Inspection for Decreasing the Losses and Costs Caused by Accidents of Fixed Equipment in Petrochemical Plants
Chapter 13: New Energy Vehicles and Electric Vehicles
Wavelet-Based Identification Method of Li-Ion Battery Model for Electric Vehicles
Energy Management of Battery Switch Station of Electric Vehicles in Two Settlement Electricity Market
NVH Prediction of Electric Vehicle Driving Motor Base on Radial Electromagnetic Force Analysis
Design and Simulation of Pure Electric Vehicle Power System
RFID Technology Application in Electric Vehicle’s Battery Charging Stations
Comparative Study on Electric Vehicle Charging Standards at Home and Abroad
The Internet of Things for Electric Vehicles: Wide Area Charging-Swap Information Perception, Transmission and Application
Study on the Influence of Large-Scale Electric Vehicles on Power Grid
Study on Various Types of Cooling Techniques Applied to Power Battery Thermal Management Systems
Study on State of Health Estimation Algorithm for Lithium Power Battery Used on Pure Electric Vehicle
Impact of Electric Vehicle Charging Mode on Load Characteristic in the Shandong Electric Power Grid
Design on Large Power Traction Battery Formation Testing System of Electric Vehicle
Simulation Analysis of the Heat Temperature Field of Lithium-Ion Battery Pack for Pure Electric Vehicle
The Application of Extended CIM in Electric-Vehicle’s Charging-Discharging System
Factors Affecting Future Scenarios for Alternative Vehicles Market
Study on the Reuse of Electric Vehicle Batteries in Energy Storage System
Energy Model of Electric Vehicle Filling Station
The Influence Research of Complementarities of Electric Vehicles and Distributed Energy on Grid Spinning Reserve Capacity and Peak Regulation
State of Energy Estimation Based on AUKF for Lithium Battery Used on Pure Electric Vehicle
Design of Interactive Terminal for Interaction between Electric Vehicles and Grid
V2G Reserve Power Supply Coordination Based on CVaR Model
Parameter Sizing of Hybrid Energy Storage System for Hybrid Electric Vehicle
Design of Electric Vehicle’s Operation Management Platform Based on Cloud Computing and Internet of Vehicle
NVH Characteristic Prediction of an Electric Vehicle Reducer
Coordination Controlling of Micro-Grid with EVs
The V2G Technique and its Application in Distributed Generation
Chapter 14: Green Building Materials and Energy-Saving Buildings
Analysis of the Solar Wall Heat Transfer and Energy Saving of Residential Ventilation
Geotechnical Approach to Use Paper in Soil
A Summer Case Study on Applying Ventilated Double-Skin Facade to a Building in Cold Zone of China
Study and Practice on the Whole Process Evaluation Strategies of Green Building
Development and Application of the Light Ceramsite Foam Concrete Insulation Block
Improving Sustainability of Housing in Ghana through Energy Efficient Climate Control Strategies
Research and Analysis on Energy Efficiency of Typical Residential Building in Super Cold Area
Research and Investigation on Present Energy Conservation in Northen Rural Houses
Energy Consumption Analysis of a New Rural Green Building
The Economic View of Green Building Based on the Humanistic Concept
Flexural and Impact Properties of Bamboo-Aluminum Sandwich Composites
Assessment of Energy Use Performance of the St. James Parish Council (STJPC) and the Montego Bay Inland Revenue Department in Jamaica
Heat Storage Composite Wall, Ventilation Application
Paper Reinforcement and Soil
Experimental Investigation of PCM-LWA Composite for Building Wallboard
Analytical Optimization of Key Design Parameters of Phase Change Materials Used in Passive Building Envelopes
Experimental Study on the Compression Rebound Modulus of Coal Gangue Mixture
Research of Ductility and Crack of Square Steel Tube Regeneration Block Mixed Short Columns
Implementation of Mathematical Modeling for Wire Rope Strands
Research on Green Building Material Assessment Factors and Eco-Efficiency Issue
Energy Conservation Analysis on Self-Thermal Insulation Walls Structural System in Cold Areas
Applications of Rigid Polyurethane Foam Insulation Materials in Architectural Energy Conservation
Study of the Density Control of the Low Density Sulphate Aluminium Cement (SAC) Foam Concrete
Effect Analysis of a Passive Solar House in Tibet
The Engineering Properties of Kaolinitic Clay and Burning Shell Activated by Alkali Solution
Research on the Overlying Strata and Grouting Range Structural Mechanics Model of Abscission Layer Grouting
Sysmatic Analyses for Green Building Engineering Based on Value Evaluation
Study on Chemical Grout Permeation Mechanism Based on Experiment of Mud and Sand Medium
