Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 4500 g
Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 4500 g
ISBN: 978-3-03785-993-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Materials Science and Engineering
Synthesis and Application of a Novel Liquid Crystal Monomer 1,4-di-[4-(3-acryloyloxyhexyloxy)benzoyloxy]-2-methyl Benzene
Carrier Hopping and Relaxation in InAs/GaAs Quantum Dot Heterostructures
Morphological and Magnetic Properties of Electrodeposited Ni-Ag Alloy Nanowire Arrays in Modified AAO Template
Durian Peeling Extract Mediated Green Synthesis of Silver Nanoparticles
Fluorescence and Judd-Ofelt Analysis of Er3+ Doped CaF2 Transparent Ceramic
Preparation and Characterization of Nitrogen Doped TiO2 Nanoparticles as an Effective Catalyst in Photodegradation of Phenol under Visible Light
Cu-Fe/TiO2 Photocatalyst for Deep Desulfurization Process
Removal of Alkali in the Red Mud Using CO2 at Ambient Conditions
Preparation and Application of Polyacrylamide-Grafted Starch Flocculant
Characterization of Nanocrystalline Titania Thin Film Deposited by Spray Pyrolysis Technique
Long Lasting Phosphorescence in Mn2+-Activeted ZnO-B2O3 Glass
Surface Modification of Natural Rubber Film with PMMA Nanoparticles Stabilized by Chitosan or its Derivative
Investigation of Mechanical Properties of Nanostructured Titanium Processed by Warm ECAP Followed Cold Rolling
Experimental Test for Evaluation of SCC Static Segregation
Performance of TiO2 Nanoparticles Synthesized at pH 2 as Photoelectrode in Dye Solar Cell
Formaldehyde Detection Based on P3HT/InSnO Composite Thin Film Transistor
Polysaccharide-Based Film of Cassia fistula and it's Antibacterial Activity
The Preparation and Apply of Ni-W-P Alloy Coating for Electricity-Control Equipment
Agglomeration of FePO4 Prepared by Continuous Reaction Precipitation
Preparation and Characterization of Bisphenol a Polycarbonate Facilitated by Supercritical Impinging Stream
Phase Composition of Starch-Gelatin Blends Studied by FTIR
Study of Concrete Composite with Participation of Waste from Sewage Plants
The Application of Soy Biodiesel in Bituminous Priming of Soil-Aggregate Layers of Low Traffic Volume Roads in the State of Ceara, Brazil
The Optical Properties and the Structure of CuInS2 Thin Films Deposited by Oblique Angle Deposition Technique
Effect of Fluorine-Containing Surfactant on Fluorinated Acrylate Emulsion Polymerization and the Properties of the Latex Film
Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC
Preparation and Properties of Rectorite/Epoxy Nanocomposites
Preparation and Characterization of Unsaturated Polyester/Organic Montmorillonite Nanocomposites
Preparation of Magnetic Polymer ICF Pellet by the Electroless Plating
Preparation of PPX Based Functional Tube and its Dielectric Property
The Synthesis of a Polyaspartic Acid Ester and Development of the Coatings
Effect of Fiber Surface Treatment on Mechanical Properties of Polylactic Acid/Empty Fruit Bunch Fiber Biocomposites
Assessment of Hydration Degree of Cement in the Fly Ash-Cement Pastes Based on the Calcium Hydroxide Content
Preparation and Properties of TiO2(B)/Graphene Nanocomposites as Anode Materials Fo Lithium-Ion Batteries
Controlled Release of Quercus infectoria Extract from Jackfruit Starch-Konjac Glucomannan Film
Intercalation and Configurations of Organic Dye Acridine Orange in a High Charge Montmorillonite
Adsorptive Removal of Pb(II) Ion from Aqueous Solution Using Rice Husk-Based Activated Carbon
Silica Nanoparticles from Rice Husk Ash: A Green Catalyst for the One-Pot Three-Component Synthesis of Benzo[B]Furan Derivatives
Irreversible Crystal to Crystal Transformation of Nano Lead(II) Coordination Polymer by Solid State Anion-Replacement
Microstructure of Porous V2O-CeO2-SiO2 Catalyst for SCR of NO with NH3 at Low Temperature
Structure and Properties of (Ti,Cr)N Films by Arc Ion Plating
A Study on Structure and Optical Properties of Sputtered TiO2 Films
The Synthesis and Characterization of Novel Cadmium Sulphide Nanocrystallites and their Thin Films
The Preparation and Optical Properties of Ag/ZnO Composite Materials
Adsorptive Desulfurization of Model Gasoline on Organic - Inorganic Modified Montmorillonite
Bioethanol Production from Pineapple Peel Juice Using Saccharomyces cerevisiae
A Novel Plasma-Chemical Process of Metallic Layer Deposition From Small-Size Volatile Metal Complexes
Synthesis of Ag/ZnO Nanocomposite with Excellent Photocatalytic Performance via a Facile Sol-Gel Method
Preparation and Characterization of Micron-Sized Elastic Microspheres as a Novel Profile Control and Flooding Agent
Removal of Pesticides by Organic Montmorillonite Composites
Preparation and Properties of Novel Nano-Cu-Vermiculite Composite for Iodineion Extraction in the Phosphoric Acid
Exchange Bias Properties in Bulk Ni45Co5Mn38Sn12 Heusler Alloy
The Phase Structure and Electrochemical Properties of La4MgNi19-xCox(x=0~2) Hydrogen Storage Alloys
The Phase Structure and Electrochemical Properties of La4MgNi17M2(M=Ni,Co,Mn) Hydrogen Storage Alloys
Development of Epoxy Composite Filled with Micro Tungsten Disulphide Particles and its Mechanical Properties
Preparation of Phosphorus Modified HZSM-5 Zeolite Catalysts and their Catalytic Performances of Methanol to Olefins
Affection of Post-Nitrogen-Doping of TiO2 Nanoparticle Film Photo-Anode on Performance of Dye-Sensitized Solar Cells
Preparation, Characterization and Catalytic Activity of Highly Dispersed Gold Catalyst
Composition of the Middle Phase Microemulsion Formed by Sodium Dodecyl Sulfonate/1-Alcohol/n-Alkane/Water
A New Route for the Synthesis of Pure Bi4(SiO4)3 Crystals by Glass Melt-Cooling Method
Properties of Copper-Based Composite Reinforced with Al2O3 Particles of Different Size
Local Materials for Building Houses: Laterite Valorization in Africa
Chapter 2: Nanomaterials and Nanostructures
Biomimetic Nanofiber Scaffolds for Tendon-to-Bone Insertion Repair
Fillers in Electrical Papers for Power Transformers
Application of Plasma Electrolytic Oxidation for the Formation of Magnetoactive Oxide Layes
Synthesis and Characterization of Ni/Al2O3 Nanocomposite for Selective Reduction of Aliphatic Double Bond(s)
Composition, Surface Structure and Catalytic Properties of Manganese- and Cobalt-Containing Oxide Layers on Titanium
The Effect of CuO-Water Nanofluid and Biomaterial Wick on Loop Heat Pipe Performance
Hydrothermal-Based Synthesis of CdS/ZnO Quantum Dots
Carbon Nanotube Composite Sensor for Structural Health Monitoring of Bridge Structures
Interference Colors of TiO2 Nanotube Arrays Grown by Anodic Oxidation
Influence of Ni/B/N/TiO2 Nanocomposite Film on Hydrophilic Property of Rubber Dipping Former Surface
The Properties of Nanocarbontubes Cement Mortar Incorporating Mineral Additives
Solar Selective Coatings with Enhanced Thermal and Corrosion Stability: Electrochemically Deposited Black Chrome on Stainless Steel in the Presence of Graphite Encapsulated FeCo Nanoparticles
Theoretical Analysis of Electrical Properties of GaAs Substrate-Nanowire P-N Junction
Chapter 3: Materials Properties, Measuring Methods and Applications
Rotating Electromagnetic System for Railway Track Crack Detection
An Innovative Low Cost Solution for Bamboo Trusses with High-Ductility Connections
Sandstone Colour Change due to the High Temperature Exposure
Analysis of Seismic Vulnerability - Case of Buildings of High Seismic Hazard
Stamp Forming of Polypropylene Based Polymer-Metal Laminates: The Effect of Process Parameters on Spring Back
The Effect of Lubricant on Electrical Connector’s Sliding Performance
Research on Fretting Performance of Silver Conducting Adhesive
Bed Topography Reconstruction in a Large Amplitude Meandering Flume: Application of Close Range Photogrammetry
The Corrosion Status of Reinforced Concrete Structure Monitoring by Impact-Echo Method
Analysis of Flexible Roller Parameters Influences on Roll Forming of Three-Dimensional Parts
Using Glass Mat Thermoplastic as Automotive Bumper’s Material to Enhance Pedestrian Safety
Multi-Function Device for Creep Testing at Elevated Temperature
The Electrically Controlled Birefringence Measurement Influence of Liquid Crystal Caused by Absorption Effect in Infrared Region
Synthetic Meshes and their Interaction with Biological Tissues in Laser Exposure
Experimental Studies on Fracture Properties of 30CrMnSiNi2A Steel
Effect of Hemp Fibre Morphology on the Mechanical Properties of Vegetal Fibre Composite Material
Slender Mixed Concrete Filled Steel Columns, in Fire Condition
Measurement of Tribological Parameters
Creep of the Steam Pipeline with Wall Thickness Nonuniformity
The Determination of Multi-Axial Fatigue in Magnetorheological Elastomers Using Bubble Inflation
Sonic Wave Band Gaps in Two-Dimensional Phononic Crystals Consisting of Hollow Mercury Columns Immersed in a Water Host, and Arranged in Simple Lattices
Elasto-Plastic Analysis Using Natural Strain: Shape of Yield Surface Generated after Pre-Deformation of Large Simple Shear
Identification Scheme to Assess the Role of Interfacial Damage in a Hemp-Starch Biocomposite
Experimental Analysis of Petroleum Wax Characteristics for Lubricant Oil Production in Solvent Dewaxing Unit
Crush Response of Polyurethane Foam-Filled Aluminium Tube Subjected to Axial Loading
Roughness Evolution and Indentation Size Effect in Superficial Layers under Plane Fatigue Loading
Elucidating Corrosion Performance of Weld in CO2 Corrosion Environment
Hierarchical ZnO Nanostructure on Steel Substrate by Electrochemical Deposition
The Structure-Phase Compositions and Mechanical Properties of Ni-Cr-Al-Based Alloy after Strong Deformation and Low-Temperature Aging
Influence of Precursor Solution Concentration on Zinc Oxide Nanostructures by Hydrothermal Growth
Characterization and Correction of Temperature Effects on Ru(bpy)32+ Fluorescence Films Used in Dissolved Oxygen Sensor
The Application of Laser-EMAT Technique Used to Testing Defect in Rail
Rheology, Deformational Properties and Fatigue of the Asphalt Mixtures
Adhesion Assessment of BNT Films on Titanium Substrates Using a Scratch Test
Measurement of the Speed of Sound in 2,3,3,3-Tetrafluoropropylene (R-1234yf) Liquid Phase with an Ultrasonic Sensor
Eddy Current Defect Detection of Side Transverse Crack in Railhead by Integrating Experiment with Simulation
Chracterizition of Dynamic Properties of Roof Bolts and their Applications
RETRACTED: Correlation of the Transition Metal Compound Ternary Nitride Thin Films
Observation of Tamarind Gum Solubility in Aqueous Solution from Turbidity Measurement Technique
FTIR Characterisation and Conductivity Studies of Undoped and Doped Conductive Polyene From Synthesize PVC with Sustainable Epoxidised Oil Coating Resin
Water Penetration Resistance of Green Concrete Incorporating with Quarry Wastes
Research of Interlaminar Defects of an Elliptic Form in Elements Designs from Layered Materials
DSSC-Integrated Glassblocks for the Construction of Sustainable Building Envelopes
First–Principles Study Including Zero Point Energy on Hydrogen in Palladium for Hydrogen Membranes Applications
The Principle of Recording Information in Distributed Environments via Suleimenov-Mun's Waves
Defining Parameters of Shear Resistance on Oil Shale Samples
Evolutionary Computation in Combinatorial of Machining Parameters of Reinforced PEEK Composites Using NSGA-II
Experimental Studies of Creep Characters of Tunnel Lining Concrete
Research on Catenary Characteristics of FAST Tie-Down Cable and its Effect on Actuator and Joint
Novel Prediction Analysis Method for Error Separation of Stylus System and CMM Machine
Research on the Performance of Strain Sensors Applied to Bridges
Study of Tension Field Expansion on Composite Steel Plate Due to Fiber Reinforced Polymer Layer Action
Analysis and Simulation of Temperature and I-V Characteristics for SiC Schottky Barrier Diodes
The Technology in Sample Preparation for Transmission Electron Microscopy and Ultrastructure Observation of Lung Tissue in Rats with Experimental Silicosis
Eco-Toxicological Evaluation of Fire-Fighting Foams in Small-Sized Aquatic and Semi-Aquatic Biotopes
Hysteresis Analysis of High Precision PZT Actuator in Dual-Stage Hard Disk Drive
Study on High Temperature Air Combustion of Hot Blast Stove
Experimental Analysis of the Welded Joint Temperature Field
A Novel Wild-Land Fire-Fighting Foam for Minimizing the Phytotoxicity of Wood Burning-Derived Smoke Tested in Living Plant Cells
NMOS Low Boron Activation in Pre-Amorphise Silicon
Study on Dust-Removing Characteristic of Carbon Fiber Membrane in Electrostatic Precipitator
Gaseous and Solid Air Pollutants Formed during the Combustion of Heavy Metal Contaminated Oak and Poplar
Rapid Detection and Quantification of Lanthanide Ions Using High-Speed Polymerase Chain Reactions
Buckling Analysis of Advanced Grid Stiffened Composite Cylinders
Application of RCW Base Dissipator on a Set of Masonry Buildings
Chapter 4: Methodology of Manufacturing Analysis and Modelling
Estimation of a Nusselt Correlations for Numerical Prediction of Frost Thickness Growth over a Cold Cylinder
Investigating the Application of DOE Method in Designing a High-Strength and High-Performance Concrete
A High Order Finite Difference/Spectral Approximations to the Time Fractional Diffusion Equations
ANSYS Parametric Modeling of Honeycomb Paperboard and the Influence of Cutting Position on Mechanical Property
Dislocation Self-Organization Processes in Silicon during High-Temperature Oxidization
Electric and Hydrodynamic Fields Distribution in an Electrohydrodynamic Pump
On an Original Approach to Model Hemp Fibers Reinforced Thermoplastics
Study of Nano-Additives Influence on Physical Properties of Bentonitic Clay
Analysis of Tool Wear Behavior of Single Crystal Diamond Based on FEM Simulation in Micro Turning
Ultrasonic Vibration Effect in Grinding of Ceramic (Al2O3)
Analysis of Flame Characteristic of Kerosene Pool Fire
An LMI Approach to State Feedback H8 Control for Switched Singular Linear Systems
Definition of a Tool Library for the Approximation of Freeform Surfaces
Piezoelectric Materials: towards A Powerful Selection Tool from a Specific User Open Chart
The Winding Insulation Electro-Thermal Aging Model of Electric Vehicle Motor Based on Operation States
Method Preparation and Solution Algorithm for Resolving Stationary Problem of a Rod under Thermo - Stressed Condition Restrained at both Ends Affected by Heat Exchange and Heat Flows
A Reconfigurable Mechanism of Cantilever Storage Racks
Results Regarding Online Asset Management System for a Transformer Station
Application of Vibration Based Damage Identification Techniques on Metallic Structures
Numerical Data in Weakly-Dissipative KAM-Theory
Finite Element Analysis of Magnetic Field of Magnetic Sealing Drive Device
Generalized Formulation to Estimate a Potential Complex Function of a Flow Past Multiple Cylinders
Smooth Cutting Operation Strategy for High Finishing Machining
CFD Study on Flow Characteristics of BOF Gas in Evaporating Cooler
Multiobjective Methodology Applied in the Gasification of Coals Mixtures for the Analysis of the Synthesis Gas Composition
Comparison of Different Construction Types for Public Buildings Applying the Analytic Hierarchy Process
Wave Propagation Analysis for Fluid-Filled Single-Walled Carbon Nanotubes Based on Analytically Nonlocal Euler-Bernoulli Beam Model
Temperature Analysis of Disc Brake Based on Parameters Fluctuation
Modeling and Simulation of Engine Power Based on MATLAB/SIMULINK
Designing Safe-Life and Fail-Safe Facade Systems
Kinetics Analysis of Decomposing Tributylphosphate with Non-Thermal Plasma
Study for the Distributed Power Grid Faults Diagnose System Based on Mas
Conceptual Modeling Methodology of Multifunction Sensors on the Basis of a Fractal Approach
Simple Prediction of Tunable Metamaterial Absorbers Reflectivity Characteristics Using Equivalent Circuit Model
Equal Life Design and Life Prediction of the Shaft Parts
Heuristic Inventive Design Problem Solving Based on Semantic Relatedness
Evolution Behaviour of Migration-Driven Growth with Catalyzed Decline
An Inter-Disciplinary Approach to the Development of a Low-Consumption Prototype for the European Shell Eco-Marathon
Study on Machinery Manufacturing CAD/CAM NC Machining Technology
Cycle Time Design and Simulation for a Certain Kind of Automatic Production Line
Micro-Rocket System of Small Object Release Process Simulation
Seismic Response Analysis of the Numerical Simulation Method on Cable-Stayed Bridge Tower which Considers the Rigid Foundation
Solution for Connecting Regenerative Electric Drive Systems to the Grid
The Numerical Analysis of Fluid-Solid Heat Transfer on Coil Terminal Box Thermal Shield for ITER Feeder
Study on the Deformations Caused by the Original Residual Stresses of Aluminum Alloy
A Model for Technological Design of the Fac¸ade Claddings with Low Thickness Stone Elements
Effect of Composite Fibers Orientations on Crack Behavior of a Thin Plate by Finite Element Method Simulation
Prediction of Microscopic Interface Crack Onset in Fiber-Reinforced Composites by Using a Multi-Scale Homogenization Procedure
Ab Initio Molecular Dynamics Simulations on High-Temperature Reaction Rates of Reactions KO+CO==K+CO2, KO+C=K+CO, and K2O+CO2==K2CO3
Topology Optimal Design of Heat Conductive Structure Based on Temperature Gradient Criterion
Lump Energy of Cutting by Single Abrasive Grain
Performance Analysis of a Multijunction Photovoltaic Cell Based on Cadmium Selenide and Cadmium Telluride
Finite Element Modelling of Static and Fatigue Failure of Composite Repair System in Offshore Pipe Risers
Delineation of Hydrocarbon with Variation of Overburden Thickness for Sea Bed Logging Applications
Research on the Modeling of Metal Material Properties Based on Logistic Model
Heat Transfer Hot-Pressing Model of Medium Density Fiberboard
Research on Residual Fatigue Life Model for Lattice Boom of the Crane In-Service
Simulation on Heat Transfer Performance of Directionally Solidified Porous Copper Heat Sink
Numerical Analysis of the Performances of Bonded Composite Repair with Adhesive Band in Pipeline API X65
Mechanochemical Sorption Apparatuses
Study on Multi-Resource and Multi-Point Emergency Scheduling Problem in Transportation Accidents for Hazardous Materials Logistics
Influence of Vehicle Velocity and Wheelbase on Washboard Enhancement Coefficient
Laboratory-Scale Experimental Design to Establish the Optimum Conditions for Chrome Plating Process: A Case Study
A Localization Model for Snubber Machining of Precision Forging Blade
Construction of Circulating Economy Development Model for New Generation Iron and Steel Plant
Technological Development Orientation on Ironmaking of Contemporary Blast Furnace
Analysis and Improvement on Acoustic Performance of Muffler with the Consideration of Temperature and Flow Velocity
Planning and Supervising Assembly Works Using Microsoft Project
Cooperative Control for Satellite Formation Reconfiguration via Cyclic Pursuit Strategy
A Launching Pattern in a Mixed Model Assembly Line
Technological Innovation to Optimize the Industrial Structure of Manufacturing in the Pearl River Delta
Design and Simulation of a Ka-Band Pattern Reconfigurable Microstrip Patch Antenna
Monitoring of the Stress State in the Boiler Drum Using Finite Element Method
Optimization of Silicon Nitride Y-Branch Optical Waveguide for Evanescent Field Biosensor
Three Dimensional Triangle Chaotic Micromixer
Numerical Study on the Growth and Collapse of a Cavitation Bubble inside a Rigid Cylinder with a Compliant Coating
The Design and Kinematics Analysis of Four-Bar Linkage of Micro-Swing Engine
Analytical Modeling and Performance Study of a Cross Flow Air Dehumidifier Using Liquid Desiccant
Ecological Optimization of Thermoacoustic Engine with the Characteristic Time
Analysis on Failure Mechanism of Sucker Rod Pumping System
Computational Fluid Dynamics Modeling of the Cold Condition Characteristic in an Entrained Flow Gasifier
Classification and Properties of Modes in Bragg Fibers
Fabrication of Hip and Pelvis Part for Designing Acetabular Implant by Using Fused Deposition Modeling (FDM) Machine
A Probabilistic Fatigue Model for Quasi-Brittle Materials
Chapter 5: Materials Manufacturing and Processing
Preparation of CF Reinforced PPS/Graphite Conductive Composite for Bipolar Plate
Effect of Homogenization Treatment on Microstructure and Properties of ZnAl15 Alloy
Effects of Combination of 0.02 wt % Sr and Ti on the Characteristics of AC4B Alloys Produced by Low Pressure Die Casting
The Exploration on Forming Processing Method by Multiple Sparks EDM
Vacuum Inert Gas Atomisation of Cr-Mn-Ni Austenitic Steel Alloys
Research of Joining Graphite by Use of Active Solder
A Kind of Environment-Friendly Titanium Chemical Mechanical Polish Development
Influence of Gravity and Mold Shape on Molding of Aluminum Foams
On Line Monitoring of Quality of Friction Surfacing
Kiln Process Impact of Alternative Solid Fuel Combustion in the Cement Kiln Main Burner – Mathematical Modelling and Full-Scale Experiment
Effect of Nickel Sulphate to Hypophosphite Ratio on the Electroless Deposition of Ni-P Coatings on Aluminium
Grain Refinement and Elimination of Hot Cracks due to Application of Electromagnetic Stirring in Commercial Aluminum Alloy Welds
Improvement of Preventive Maintenance Plan for an Automatic Labeling System: A Case Study of a Carbonated Soft Drink Industry
Effects of Silane Coupling Agent/Organic Bentonite on Tea Saponin Intumescent Flame-Retardant Coatings
Effect of over Tempering at UHSLA Steel ARMOX 500
Refining of the Steels Significantly Improve the Quality
Experimental Research on NC Electrochemical Machining of Passage between the Two Adjacent Blades of Integral Impeller
Development and Application on Large Annular Shaft Kiln at Shougang
The Effect of Grain Size and Cobalt Content on the Wear of Ultrafine Cemented Carbide Tools
CO2 Laser Induced Blind-Via for Direct Electroplating
Nanotechnology of Grained Multyligand Luminescent Materials for SSL, SC and X-Ray Sensors
Composite Polymer Joining by Laser Combined Hybrid Laser Process
Molecular Dynamics Studies of Cold Welding of FCC Metallic Nanowires
Effect of Mineralizer Concentration on ZnO Crystals Synthesized by Hydrothermal Method
A Method of Improving Accuracy of Lapping Main Cylinder of Brake-Pump
High-Frequency Electromagnetic Waves for Diesel Soot Oxidation Strategy
Growth and Morphology of SbSe Based Island Films
Analysis of the Ductile Iron Production on the Steel Scrap Base
Effect of Non-Conventional Aging Treatments on the Tensile Properties of Non-Hipped Castings of Aluminum Alloy 354
The Effect of Cutting Speed on the Machinability of 2080 Special K Steel on Vertical Machining Center
Optimization of Machining Hybrid Metal Matrix Composites Using Desirability Analysis
Study on Temperature Influence on Lack of Fusion Formation in Spatter/Base Metal Interface
Effect of Non-Conventional Aging Treatments on the Tensile Properties and Quality Indices of Hipped Components Made of Cast Aluminum Alloy 354
The Actual State and Prospects of a High Power Electron Beam Technology for Metallic and Non-Metallic Compositions Used in Electric Contacts and Electrodes
An Environmental Impact Comparison of Distributed and Centralized Manufacturing Scenarios
Novel Anti-Caking Materials in Compound Fertiliezer Based on Waste Animal/Plant Oil
Th
