Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
ISBN: 978-3-03785-528-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface and Committees
Chapter 1: Materials Science and Technology
Numerical Simulation for Erosion Thinning of Pipes in Petrochemical Plant
Fabrication Scaffold by Extrusion Freeforming from High Solid Loading Ceramic Paste
Migration and Storage Mechanisms of CO2 with Different Injection Rates
The Impacts of Different CO2 Injection Temperature on Heat Extraction Rate in CO2-EGS Based on CCS Demonstration Project
Research on Efficient Utilization of Sulphur Concentrate with Deep Flotation Method
Effects of Trichloroethylene on the Wastewater Treatment in Membrane Bioreactors
Structural Sand Dynamic Elastic-Plastic Deformation Time-Dimensional Model
Photo Electrochemical Responses of Titanium Oxide Nanotube Arrays on Pure Titanium Substrate
Preparation and Utilization of Lignin Ionic Adsorbent for the Removal of Cr(VI) from Aqueous Solution
Density Functional Theory Study of GdnO3 (n=1-5) Clusters
Changes of pH in A2O Process System and its Impact on Nitrogen and Phosphorus Removal
Polycyclic Aromatic Hydrocarbons in Chinese Raw Coal
A Simple Soft Sensing Method Based on DO Simulation for COD/OUR/Ammonia/Nitrite/Nitrate in a Constant Aerotion SBR
A Study on Mechanical Lubricant Wastewater Treatment by Carbonized Rice Husk
Optimization of Research on the Extraction of Humic Acid from Lignite Using Response Surface Methodology
The Optimized Negative Clearance Value with Reason in ASTM-Gr.D Fine-Blanking with Negative Clearance Blanking
Analysis of Fatigue Residual Life of Zhuan 8AG Side Frame
Electrochemical Oxidation of Ce(III) to Ce(IV) in Mixed Acid (H2SO4 and CH3SO3H)
Micro Experimental Research on Cement Stone under Sulfate Erosion
Electron Micro Technology Study on BN Fiber’s Microcosmic Structure and Mechanics Properties
Use Electron Micro Technology to Study Microcosmic Structure and Mechanical Properties of Si3N4/Nanon SiC Multiphase Ceramics
Comparative Analysis on Characteristics of Gasoline & Gasoline Methanol Blend
Chapter 2: Applied Mechanics, Mechanical Engineering and Fuel
Research of Rail Pressure Characteristics of Common Rail Fuel System
Research on the Diagnosis Method of the High-Speed Rolling Bearing
An Accurate Method of Adjusting the Resonant Frequency of Defected Microstrip Structure
Research of Experimental System for Pressure Reducing Valve Performance and Life Test
Research on Fault Diagnoses of Rolling Bearing Based on the Energy Operator Demodulation Approach
Influence of Retainer Bearing Misalignment on the Performance of Active Magnetic Bearing
Research on Reciprocating Machinery Fault Diagnosis and Testing Method
Magnetic Bearing Rotor Vibration Analysis Based on the Harmonic Wavelet Package Algorithm
A Method for Components Fault Model Building
Fractal Theory Method’s Research of the Gear Fault Diagnosis
Static Load Test and Modal Analysis of Qingshui River Bridge
Study on Design of Cable Automatic Mounting Vehicle Structure
Research on Gasoline Antiknock Additive Affect to Vehicle
Study on Networking and Intelligent Fault Diagnosis System for Large-Scale Rotating Machinery
Sliding Ropes Brake Device of Friction Hoist Machine Design and Application
Structural and Hydraulic Design of Mechanical Pump Using in LBE Test Loop
Motion Analysis and Research on Mobile Swing Type Manipulator
Study on Analysis of Vehicle Engine Failure Risk Based on ANP_FE
Numerical Analysis on Steel Reinforced Concrete Beam-Concrete Filled Steel Tubular Column under Cyclic Loading
FEM Strength Analysis on the Main Structure of Modular Mechanical Water Treatment Plant
Under Axial Load Finite Element Analysis of Characteristics of Circular Steel Tube Compile Short Column Filled with Steel Reinforced Concrete
Structural Stability Analysis of Dump Truck Body Based on ANSYS
The Modal Characteristics Study of a High-Speed Rotating Hollow Cylinder with the Influence of Spin-Softening, Coriolis and Prestress Effects
The Application of ANSYS Multipoint Constraint on the Combination Modeling of SOLID-SHELL
Experiment Study on Fatigue Strength of Used Type Zhuan 8G (Zhuan8AG) Side Frame under the Speed Increased Condition
The Input Axis' Mode Analysis of the Four Ring-Plate-Type Cycloid Gear Planetary Drive
The Study of Modified Effect on Planar Double Enveloping Worm Pair
The Modification and Design Method of Large Gear
Stability Performance Study on the Conversion Track Wheel Loader
Attitude Stability and Control of the System Coupled with Main Rigid Body, Elastomer and Tip Rigid Body
Particle Swarm Optimization for Identification of PEMFC Generation System Fuzzy Model
The Design of a Device for Burning Biomass as Straw and Brushwood
Study on Electrical Ignition Characteristics of HAN-Based Liquid Propellant Spray
The Study on Control Strategy of Rail Pressure in the Starting Process for Common Rail Diesel Engine
Blade Damage Forecast Research Based on Support Vector Machine
The Effect of Gasoline/1-Butanol Blends on Spark-Ignition Engine Performance
Investigation of the Effect of Fuel Reactivity on Dual-Fuel PCI Combustion
Investigation on Improvement and Design of Automotive Muffler
The Study of HEV Special Two-Stage TWC Characteristics
Fault Causation Analysis of Oil-Delivery Pump Based on Fuzzy Petri Net
Accurate Control of Air-Fuel Ratio for Gasoline Engine under Idle Speed Condition
Motion Performance Analysis and Experiment Research of the Hooke’s Joint-Gear Mechanism of Differential Velocity Vane Pump
Research on the Detection and Amendment Method of the Fine Processing to Propeller of the Submarine
Numerical Investigation of Using 1-Butanol in a Port Fuel Injection Spark Ignition Engine
Development and Application of Vehicle Electronic Throttle
On Hydraulic Brake System Using Bench Experiments for Off-Road Vehicles
Static Behavior Analysis of a New Space Beam-String-Structure with Outer Truss Torus
Design and Optimization of Low-Thrust Orbit Transfers Using Hybrid Method
Study of Normal Force-Displacement Relationship in Spherical Joints
An Experimental Investigation on Engine Exhaust Emissions of a Low Heat Rejection (Mullite Coated) Single Cylinder Diesel Engine
Chapter 3: Electrotechnics, Electrical Machines and Electric Power Systems
Study on the System Disturbance Rejection Method Used in the Gimbal Servo System of Magnetically Suspended Control Moment Gyro
Simulation Research on Dynamic Performance of Electric Vehicle Based on ADVISOR
Radiant Panel Columns Magnetostrictive Transducers of Forced Vibration
A Power Network Partitioning Method Based on Local Similarity Measure
Vehicle Performance Simulation of Electric Bus with Composite Power Supply Based on Secondary Development of Advisor
A New Circuit Model Detection Method via Electromagnetic Scanning
Research and Application of BP Neural Network in Specific Power Harmonic Detection
Pattern Recognition for UHF Partial Discharge of Power Transformer Using LS-SVM
Study on Harmonics Suppression of High-Power Rectification Circuit Based on Saber Simulation
A New Modulation Method Based on Current Hysteresis Control for Cascaded H-Bridge Inverter
Fault-Tolerant Control Research of Vehicle-Mounted 5-Phase Inverters
Fault Tree Analysis of Vehicle Charging System
Optimization Design of Electromagnetic Ultrasonic Transducer
Design of a Single Load Li-Battery Contactless Charging Platform with Frequency Tracking
The Numerical Modeling of the Signal Transmission by the Cables and the Coil Coupling for LWD
Optimization Design for Rotor Structure of Brushless Doubly Fed Machine
Design an Unscented Kalman Filter-Based SoC Estimator for HEV Application
Development of Inverter for Electric Propulsion Motor of Ship
The Filtering Device under Improved Direct Current Control
Construction of Experimental Platform for Multi-Motor System Synchronization Control
High Pressure Suspension Injector Electromagnetic Valve Drive Circuit IR2110 Design Application
Study on the Direct Current Control Method Based on the d-q Transformation
Analysis on the Lightning Current Model
Analysis and Suppression Strategy of Harmonics for SPWM Inverter
The Compatibility Assessment between Voltage Sags and Equipment Tolerance Based on Fuzzy-Random Method
Analytical Calculation Model of Air-Gap Magnetic Field for Claw Pole Machine with Outer PM Rotor
A Friction Feedforward Compensation Method Based on Electromagnet Torque Feedback Compensation
Study on a New Setting Method of Distance Relay with Superconducting Fault Current Limiter Adapt in the Grid
Static Analysis and Electromotor Power Calculation of the Bisectional Astronomical Dome
On-Line Parameter Identification and Active Disturbance Rejection Control of Permanent Magnet Synchronous Motor
Harmonics Analysis and Countermeasures for Power Factor Compensation Experiment
Based on LabVIEW Resistance Method Temperature Testing for Traction Transformers and Motor Winding
Vector Control for Connectionless Two-Motor Synchronous System
Improvement of Boost Circuit Based on Fly-Back Switching Power Supply
Comparison Research on Energy-Saving Search in Vector Control for Induction Motor
Optimization of Rotor Angle Signal for Permanent Magnet Synchronous Motor
Inertia Compensation of EPS Based on Kalman Filtering
Analysis and Calculation of the Normal Force Fluctuations of Permanent Magnet Linear Synchronous Motor
Rotor Cooling System Design and Fluid Field Analysis of MW-Level High-Speed Permanent Magnet Motor
Design of Brushless Electric Excitation Synchronous Machine
Dynamic Simulation Analysis of Heavy Load Starting Light Load Running Induction Motor with High-Performance
Research on the Claw Pole Machine with Outer PM Rotor Driven by Trapezoidal Current
Development of Marine Electrical Propulsion Simulator
Chapter 4: Power Engineering
Application of Power-Line Power Frequency Communication in Oilfield Distribution Network
The Convergence Analysis of Parsing Algorithm in Power Flow
Research on Voltage Regulator System of Aircraft Power Generation System
A Novel Electronic Current Transformer for High Voltage Systems
Reactive Power Compensation and Configuration of Wind Farm
Research of TCSC Damping Effect on Low Frequency Oscillation in West Yunnan Power Grid
Improving Active Output Capacity of Large-Scale Wind Farm by Installation STATCOM
A High Precise Automatic Test Platform for the Boards of Wind Power Converter
The Research of a Derivation Calculation Method for the Maximum Power Point in Grid-Connect Photovoltaic System
Run Real-Time Monitoring of Wind Power Generation System Based on WSN
The Charge and Discharge Scheme of the Battery in the Solar Lighting System
Research on Wind Turbine Blade Static Loading System and its Variable Traction Control Mode
The Design of Lightning Protection in Automatic Charging Station of the Aviation Airport
Irradiation Distribution on Solar Cells inside CPCs with a Restricted Exit Angle
Assessing the Ageing Condition and Lifetime of Electromagnetic Relay in Nuclear Power Plant
Modeling and Design of Permanent Magnet Vibration-to-Electrical Power Generator’s Induction Coil
Modeling and Simulation of Permanent Magnet Machines Output Voltage Conditioning in the Air Three Generator
Controlling Chaos in Power System Based on Tridiagonal Structure Matrix Stability Theory
Research of Power System Harmonic Analysis Based on Wavelet Theory
Influence of a Flux-Coupling Type Superconducting Fault Current Limiter on Power System Transient Stability
Complementary Power Controller of Wind-Solar Energy Based on Soft Switch PWM and Parallel Balanced Current Technology
Design and Analysis of MW-Level High Speed Permanent Magnet Machine
Chapter 5: Instrumentation and Sensors
Research on Verification Device of DC Electrical Energy Meter for Electric Vehicle Charger
Design of Changeable Range Voltage Monitoring Recorder
New Challenges Implementing Cognitive Radio in Wireless Sensor Networks: A Survey
Energy Consumption Model for Wireless Sensor Networks
CMOS Image Sensor Performance from Different Order of Interpolation and Noise Reduction
Research of Intelligent Integrated Averaging Pitot Tube Flowmeter
Comparisons of OSSDL and VCN Localization Algorithms in 3D Wireless Sensor Networks
Sensor Fault Diagnosis Based on Wavelet Transform in Smart Grid
A Novel Sensor Less Control of Induction Motor Based on Fuzzy Sliding-Mode Structure
GAAS Semiconductor Laser Ceramics Finish Measuring Instrument
Analysis of Circuit Parameters of Eddy Current Sensor
Chapter 6: Electronic, Radio Engineering and Acoustic
A Novel Nano-Scale Multi-Finger MOSFET DC Model Parameters Extraction Method
Adaptive Beam-Forming Based on the Mutative Scale Chaos Optimization
The Study of Local Wave Noise Reduction Based on the Correlation Analysis
A Ka-Band Bandpass Filterusing U-Shape Resonators Based on LTCC Technology
A Parameter Estimation Method for Poly-Phase Coded Signal Based on the Modified Fractional Fourier Transform
Three-Channel High Temperature Superconducting Filter
Intelligent Battery Charger Based Design Based on MCU
Design of DDS Based on Improved CORDIC Algorithm
A Design of Loop Control Method for Feedforward Power Amplifier
Design of a USB OTG Mass Storage Module Based on LM3S9B90
Wholly ICA Based Estimation on DOA of Spatio-Temporal Sources
Measurement of ARJ21 Aircraft Landing Gear Noise Using Array Signal Processing Technology
Parameter Estimation of the Projectile In-Bore Based on Time-Frequency Analysis
Pattern Recognition of the Soft Abrasive Flow Based on Wavelet Packet
Experiment Investigation of the Temperature Characteristics of 975nm SLD
Research and Realization by FPGA of Turbo Codes
Designation of Image Acquisition Module Based on the C8051F340
Low-Power Design for Battery Management System
From Simulation to FPGA Control Circuit Implementation for Wind Power with Battery Charging
An Improved Ultra-Wideband, Ultra-Short Monocycle Pulse Generator
Design of LDPC Decoder Based on CMMB
The Effect of Sea Bottom Acoustic Parameters on Acoustic Wave Transmission in Shallow Water
Simple Transmission Performance Analysis System of Digital Signal Using FPGA
A Boost White LED Driver with an On-Chip Compensator
Research on the Repeater Optimization Based on Voronoi Model
Application of a Pseudo-Fourier Series Method in Tilt Data Processing
Grid-Connected Solar Microinverter Study and Design Using a dsPIC Digital Signal Controller
Application of Wavelet Domain Adaptive Filtering to De-Noise NMR Data
Application of Non-Inverting Buck-Boost DC-DC Converter in Photovoltaic Power Systems
The Automatic Positioning System of Coke Oven Locomotive Based on Radio Frequency Identification and Image Processing
A Variable-Length FFT Processor Base on Mixed-Radix Algorithm for PAPR Reduction in OFDM Systems
Speech Signal Acquisition and Processing Based on DSP
Harmonic Calculation of 12-Pulse Rectifier and Determination of Filter Capacity
A Low Temperature Coefficient, High Voltage Detection Circuit Used in Power over Ethernet
Recognition and Diagnosis of the Incipient Faults in Analog Circuit Using Improved HMM
Loss Analysis of Three-Level Active Neutral Point Clamped Converter under Fault Tolerance Operation
Using Ambient Noise to Inverse Geo-Acoustic Parameters
A Waveguide Design of Microwave High Power Passive Tuner
Experimental Investigation on Supersonic Jet Noise
An Improved ip-iq Harmonic Detection Algorithm
Design of a 10 Gbps VCSEL Current Driver in Active Feedback Technology
A 10Gb/s Low-Power Front-End Amplifier for Optical Receiver in 0.18µm CMOS Technology
Design and Improving Techniques for Uplink Reference Signal in LTE Compatible Mobile Satellite Communication System
An Open-Loop Method of Controlling Narrow Band Channel Delay
A High Efficiency Step-Up WLED Driver with Wide Range PWM Dimming
Visibility Analysis of GNSS Satellites in Mountainous Area
Design and Improvement of Host and Backup Selection
Data Quality Control of Wind Profiler Radar Based on Extended Kalman Filter
Design of Micro-Wideband Radar Experiment System
Electromagnetism Compatibility Design of an Interference Antenna
Research of GPS Signal Multipath Effects Based on GAMIT TRACK
Radar Emitter Signals Identification Based on Gray Relational Cluster Analysis
Test Frequency-Domain Parameters of ADCs Using a Spectrum Leakage Correction Algorithm
Current Loop High Performance Compensation Control Strategy Analysis of Active Power Filter
A Study on the System of Radio Frequency Identification and Localization Works in UHF
Design and Simulation of LED Drive Power Supply Based on ARM
Design of Acceleration Sensor Simulation System Based on STM32
A 12-Bit 1GS/s Current-Steering DAC with Matching Capacitor in Switched Current Cell
Suppression of Single Vector Hydrophone Coherent-Noise Based on the Cross-SCF
An Auto-Test System Based on VEE for the Improvemet of Target Position Precision
Chapter 7: Detection, Monitoring and Measurements
The Design of Wireless Monitoring System Based on Zigbee
Measurement of Moment of Inertia Based on Torsion Pendulum
An In Situ Dissolved Oxygen Monitoring System Based on Fluorescence Quenching Phase Detection
Detecting Edge Using Support Vector Machine
Design of a Multi-Channel Temperature Circuit Monitoring System Based on PID Algorithm
Remote Monitoring System Design for Renewable Energy Connected to Power Grid System
A New Method of Harmonic Current Detection and Control Strategy of Compensating Current
Power Supply Programs and Improvement of the Wireless Sensor Network in Environmental Monitoring
A Suitability Evaluation Method Based on Fractal Dimension in Geomagnetism Matching Navigation
Slurry Concentration Detection Theory Based on the Ultrasonic Echo Attenuation
Measuring Coaxiality with Optoelectronic and Non-Contact Based on Helical Scanning
Research of Super-Size Intelligence Flow Measurement System
Design of Portable Fault Diagnosis System for Reciprocating Machinery
Fault Diagnosis for Rack Vibration of Brush Roll in Washing Section of Galvanization Unit in Cold Rolling Plant by Means of HP35670A Dynamic Signal Analyzer
The Application of Tunnel Monitoring and Measurement in Yanjia Tunnel of Guzhu Expressway
Radius Measurement of Tegular Rounded Material Based on Sublevel Concentration Sample Method
Research of Double-Differenced Carrier Phase Cycle Slip Detection Based on Wavelet Analysis
Measuring and Modeling Analysis of Electrochemical Impedance Spectroscopy for Hydration Procedure of Cement Materials
Distribution Grid Condition Monitoring Based on BP Neural Network
Development on Remote Monitoring System for Air Compressors
Application of Grey System Method in Stress Monitoring and Control of Continuous Girder Bridge Construction
Videogrammetry and its Application on Attack Angle Measuring in Wind Tunnel Testing
Novel Nonlinear Process Monitoring Based on KPCA-ICA
Real-Time Monitoring Unit of Traffic Flow
Research on Construction Schedule Real-Time Control of High Core Rock-Fill Dam Based on Digital Monitoring
A Model- Based Detection Method for Stator Core Fault in Induction Motors
Inspection of Timberwork with Pinhole Camera Technology
Feature Analysis and Extraction of Complex Motion Target Based on Coherent Laser Remote Sensing Detection
A Local Feature Based Fusion Algorithm for Fire Detection Image
Research on Key Techniques for Monitoring System of Agricultural Products Transportation Environment Based on Internet of Things
Improved ART1 Neural Network Based Condenser Fault Diagnosis
Design of Agriculture Environment Monitoring System Based on Wireless Sensor Network
Monitoring and Alarm System for Coal Mine Safety Based on Wireless Sensor Network
Research on Precision Measuring System for Motor Speed
Identification of Arsenic in the Water Using Energy Dispersive X-Ray Diffraction
Design of Warehouse Environmental Monitoring System Based on WSN and Fuzzy-PID Strategy
Design of Vehicle Dynamic Weighing System Based on S3C2440
Design and Research of Aligned Array Pressure Monitoring System Based on Strain Chip
The Design of Power Quality Online Monitor Device under Smart Grid
Joint Target Detection and DOA Estimation of Underwater Targets Using Moving Array
The Design of Low Power Vibration Detection System Based on MEMS
An Ultrasonic Travel Time Measuring Method for Relative Blood Volume Monitor
A Vehicle Heading and Attitude Measurement System Based on Earth Magnetic Field Sensor
Parameter Testing Network for Electric Cars Based on CAN-BUS
A Novel Ultrasound Imaging System Based on Endoscopic Array Probe
A Portable Spectrum Measurement System Based on Laser-Raman and Fluoresce Spectrum for Cooking Oil Analysis
Quality Monitoring and Prospects of Wire Bonding
Environmental Data Acquisition System for Satellite Transportation
Chapter 8: Computer-Aided Design and Simulation
Implementation of Airborne Remote Sensing Route Design System
The Display and Free Rotation of 3D Model in Virtual Assembly System Based on ACT
Research of Hand Gesture Recognition in Multi-Touch Projector-Camera System
A New Genetic Algorithm for Balancing Network Load
The Influence of General Disturbances on the Hammerstein Model Identifications
The Real Time System of Hair Detection in Mushroom Based on Computer Vision
Application of Human-Computer Speech Interaction in Dispatching System
Research on Hardware Design Verification Methods
An Improvement of ZigBee Cluster-Tree Routing Protocol
The Design and Realize of Activation Platform on Dynamic Simulation Test Machine of Guns
A Design of IP PBX Phone System
Simulation and Experiment Study on the Magnetic Rheology Damper
Study on Simulating Characteristic Parameters of PEMFC Using MATLAB/SIMULINK
Research and Design of Portal to Integrative Data Platform for Power Dispatching System Based on Android
An Improved Algorithm of Hand-Gesture Recognition Based on Haar-Like Features and Adaboost
Research of Substation Visualization Based on 3D Panoramic and Geometric Modeling Technology
Computer Simulation Technology of Precision Lapping Process of Polycrystalline Diamond
Seven Dimension Chaotic System and its Circuit Implementation
Simulation Research on Cavitation Flow in Tip Clearance of Axial-Flow Pump
Numerical Simulation of Cutting Process by Cutter in Shield Machine
The Numerical Simulation of Three-Dimensional Dynamic-Mesh Flow Field of a Hydraulic Buffer
Simulation of Processing Tomato Fruit-Stem Separation Based on Double Crank Mechanism
Study on the Optimized Blanking Allowance for Fine-Blanking with Negative Clearance through Simulation and Optimization Methods
Numerical Simulation of Different Schemes’ Influence on Coastal Areas for Groundwater-Source Heat Pump Engineering
Numerical Simulation of Thermal Process in Rotary Hearth Furnace for Pellet Direct Reduction
The Application Research on Voxel-Based Expression of the Virtual Geographical Environment
Simulation of Left Heart-Arterial System Using Electronic Model
Speech Recognition for Endoscopic Automatic Positioning System
A Modeling Method of Multiphase Synchronous Generator for Shipboards Power System Based on PSCAD/EMTDC
Numerical Simulation Program of the Foundation Pit
An Iterated Local Search Algorithm for Task Assignment in Distributed Computing Systems
Study on Lidar Data Interpolation Method Based on GA-BP
Research and Realization of Highly Accurate Data Generation Based on Channel Simulator
The Application of Virtual Reality Technology in the Housing Display System
Modeling and Dynamic Simulation of MARK XIIA Mode 5 System
Hardware-in-the-Loop Simulation System of Penetration Fuze Based on LabVIEW
An Application of Binocular Vision Model in Intelligent Vehicle System
The Simulation of Vision Measurement System for Cannon Barrel Pose
Numerical Simulation of Air Flow Arrangement and Energy Conservation of Air-Condition
Implementation of Key Technology of the Simulation and Training System for X-Type Missile Tail Test
Study of Surface-to-Air Intercepting Missile Simulation Model
Study on the Principle of Yarn Splicing of Pneumatic Splicer Using Numerical Simulation
Numerical Simulation of Array Induction Logs Time-Lapse Responses and Formation Resistivity Profile Reconstruction with 5-Parameter Inversion
3D Creation Methods Based on User Coordinate System of AutoCAD
Throw Distance Model and Contact Force of Bicyclist in Traffic Accident Based on PC-CRASH
Numerical Investigation of Plasma Plume Deflection with MHD Control
Simulation of Wave-Maritime Structure Interactions by Using a Numerical Wave Flume
Application of Mixed Boundary Condition to Wave Equation Forward Modeling in 2.5D VTI Medium
Joint Modeling of DFIG-Based Wind Turbines for Structural Load Characteristics Analysis
Application of Web-Based 3-D Panoramic Technology in the Equipment Visualization
Research on Simulating Optimization of Extended Penetrator
Chapter 9: Control, Automation and Diagnostic
Design of an Intelligent Controller for Control and Protective Switching Based on Profibus
A Design of Controller for Wind/Solar Hybrid Power System with DC Load Based on PIC24
LS-SVM Adaptive Back-Stepping Control for a Class of Uncertain Nonlinear Systems
Research on Performance of Control System Based on EtherCAT
Research on the Auto-Row-Aligning Technology of Root-Tuber Crops Harvesting Machine
Research on Online Standby Running of Power Automation System Based on CORBA
Topology-Based Traffic Identification Method with Heuristic Rules
Three-Dimensional Micro-Displacement Control System for a Conductor Defect Detection System
Develop of Master Station Facility Based on the Distributed Structure of the Oil with TWACS Well Remote Monitoring System
Research of Automotive Glass Fog System Based on RBF Neural Network
Study on Torque Measurement Errors’ Compensation of Reducer Based on Piecewise PID Control
Fuzzy Adaptive Compensation Control for Robot Manipulator with Uncertain Dynamics
The Research of Heating System Based on Generalized Predictive Control
Parameters Determination of PID in MAX1978
A Novel HCI Platform for Power Control System
The Forecasting of the Elevator Traffic Flow Time Series Based on ARIMA and GP
Diagnose Expert System of Engine Based on Fuzzy Neural Network
Multi-Manual Emergency Escaping System of Air Control Bus Door Based on Driver and Passenger Manipulation
Study of the Search and Rescue Robot’s Motion System in the Underground Environment
Study on Regenerative Braking Control Strategy
Hybrid Spectrum Access and Power Allocation Based on Improved Hopfield Neural Networks
Application Research of Adaptive Control Techniques in the Hydraulic Torque Converter's Buffer Locking Process
Design on Real-Time Control System of Lower Limb Exoskeleton Robot Based on Optical Fiber
PID Parameter Setting Based on Fuzzy Control Algorithm and its Application in the Temperature Control System of Airplane
Design of a New Nonlinear Excitation Controller Combined Differential Geometry with PID Theory
Design on Cooperative Control of the Wearable Exoskeleton and the Movement Behavior Prediction of Human Beings Based on EEG
The Knowledge Sharing Based Reinforcement Learning Algorithm for Collective Behaviors of Mobile Robots
Research of Automatic Tracing Control for Infrared Intelligent Lunar Vehicle
FPGA-Based Research on the Constant Temperature Control System of Air Source Water Heater
NN-Based Adaptive Output Feedback Stabilization via Passivation of MIMO Uncertain System
PFC Controller Based on Self-Adaptive Proportional-Resonant Control
Control Design for Two Cylinders Loading System of Bellows
Research on Anti-Interference Measures for the Control System of Flow Calibration Facility
Mobile Robots' Wall-Following Controller Based on Probabilistic Spiking Neuron Model
The Vehicles ESP Test System Based on Active Braking Control
Research on Corner Matching-Based Video Localization by Robots in RoboCup
Design of Control Network in Video-Intercommunication System of Intelligent Communities
Setting Program of Dead Time with No Dead-Time Effect Based on Single-Cycle Control
Studying on Expert Control System Used in the Electromagnetic Drying
Adaptive Control System of Milling Machine
Research on the Mixed Scheduling Algorithm of Networked Control System Based on CAN Bus
The Design and Realization of Control System for Underwater Vehicle
The PID Control System for the Electric Buses Battery Swap Robot
The Design and Implementation of Orchard Long-Distance Intelligent Irrigation System Based on Zigbee and GPRS
Idle Speed Control for GDI Engines with Interval Time-Delay
Test System for Airborne ILS Navigation Apparatus Based on Artificial Intelligence and Virtual Instrument
Design and Implementation of the Control System for Two-Wheeled Self-Balancing Vehicles
Synchronization System Design of Ground Electromagnetic Probe Based on FPGA and GPS
Study of Direct Torque Control System of Matrix Converter Multiple Voltage Vectors
Robust Nonlinear Control of Electric Power Steering System Based on Lyapunov Redesign
The Dual-Mode Maximum Power Point Tracking Control Method Based on Improved Variable Step Size
Research and Analysis for Electronic Throttle Control Method
A Optimized Design of One Traffic Circle
The Movement Analysis and Research of 3R Parallelogram Linkage Manipulator
Application of Plug-In Electric Vehicles and Controllable Loads to Frequency Regulation
Multi-Period Discrete-Time Repetitive Control for Permanent Magnet Linear Synchronous Motor
Designing a Fuzzy PID Controller for Brushless DC Motor
Performance Comparison of Standard Terminal Sliding Mode Control and Non-Singular Terminal Sliding Mode Control
Lagrange Dynamic Modeling of a Multi-Fingered Robot Hand in Free Motion Considering the Coupling Dynamics
Workspace Analysis and Going through Singularities of 5-Bar Symmetric Planar Parallel Manipulator by Automated Selective Actuation Mechanism
Chapter 10: Manufacturing Processes and Technologies
Technology and Mechanism of Valuable Metal Recovery from Pyrite Cinder by Chloridizing Roasting
One-Step Synthesis of Thin Graphite Layers Supported CNTs in Porous Copper by CVD
In Situ Synthesis of CNTs/Mg Composite Powders by CVD at Low Temperatures
Study on Mechanism of Molybdenum Concentrate Carbon-Free Roasting
Experimental Study on Recovering Molybdenum from One Processed Tailing in Bai Shi Zhang Plant
Development of the Manufacture Equipment for Resin Bonded Diamond Abrasive Wire Saw
Research on Cutting Force and Surface Roughness in Face Milling Ni-Based Superalloy
The Effect of Molding Process and Test Conditions on the Thermal Conductivity of Polypropylene/Graphite Composites
Study on the Aging Regularity of SWRH82B Hot-Rolling Wire Rod
Development and Application of the Tiger Punch
The Fuzzy Fault Tree Analysis of Rotary Working Table for C5250 Vertical Lathe
Development of Handheld Ultrasonic Spot Welding Machines
Research on Reliability of CNC Grinding Machine Based on Function Structure Tree
Research Developments on Improvement of Spray Cooling Performance
Static Stiffness Analysis and Modal Analysis of Horizontal Milling & Turning Machining Center
Characterization of Cutting Temperature and Ignition Phenomena of Magnesium Chip Using Infrared Imaging
Virtual Manufacturing Technology and Application over Tooling Machines
Droplet Transfer on Three Phase Relations at Four-Wire Welding Robot
Prospects Analysis of Integrated-Wrapped Multi-Layer Vessels Used as High Pressure Gaseous Hydrogen Storage Vessels
Research and Practice on the Process Cost Estimation Based on Features and Intelligent Computation of Locomotive Axle
A Surgical Training Biomodel Manufacture Using Fused Deposition Modeling
Mathematical Model Establishment of Prefabricated Hole Flange-Forming of Equal Diameter Tee Pipe
Chapter 11: Hydro- and Aerodynamics Engineering
The Structure and Fluid Analysis for the New Type of Rotary Tubular Liquid Mixer
Studies on Fluid-to-Fluid Modeling of Critical Heat Flux in a Helically-Coiled Tube
Study of Hydrodynamic Characteristics of the Sloping Breakwater of Circular Protective Facing
Study on Flow Separation Control by Vortex Generator Jets with Different Parameters
Effect of Unsteady Wake on Flow Control of the Low-Pressure High-Lift Cascade with Synthetic Jet
Optimization Analysis of Height and Distance for Shelter Wind Wall of High Speed Railway
The Study on Supply Air Pressure of Surface Supplied Diving System Based on Bernoulli’s Equation
An Experimental Study on the Current-Following Characteristics of a Surface Drifting Buoy
Experiment Research on Effect of Airflow in Web Cleaner on Carding Force
Comparison of Critical Heat Flux for R-134a Flow Boiling in a Horizontal Straight Tube and a Helically-Coiled Tube
Absolute Nodal Coordinate Formulation for Aeroelastic Analysis of Panel
Application of Improved TVD Scheme in Hypersonic Heat-Flux Simulation
Chapter 12: Heat Transfer, Thermal Analysis and Thermodynamics
Utilization of Waste Heat of Circulating Cooling Water in Hot-Stamping Power System
Study on the Freeze-Drying Dual-Evaporator Refrigeration System
Research on Cylinder Drop Stamping Part of Heat Recovery Regularity Based on Pro/Mechanica
Experimental Study of the Temperature Field Equation in the Leeward Tunnel during Mine Fire Period
Thermal Analysis Study on Packaging Materials of Power-LED
Shape and Size Optimization Design of Finned Brass Tube on the Central Air Conditioning
A Perturbation Analysis of the Fully Developed Convective Heat Transfer inside a Longitudinal Corrugation Channel
Analysis of Temperature Field of Nuclear Canned Pump and Thermal Deformation Calculation of the Shielded Can
Film Cooling Adiabatic Effectiveness for Cylindrical Holes Embedded in Multi Trench Configuration
Research of Absorption Refrigeration and Air Conditioning Equipment Using Waste Heat from Marine Incinerator
Chapter 13: Geotechnical Engineering and Vibration
Experimental Study on Ultrasonic Vibration Drilling of Titanium Alloy Micro-Hole
Test of Reliability of Micro-Accelerometer in Vibration Environment
Slender Pipe Vibration Cracking Analysis and Vibration Reduction Measures
Improvement of Laminar Shear Container for Shaking Table Test
Fractal Features of Cracked Backfill Particle Size Distribution
Study on Abnormal High Intensity of Hanyuan during Wenchuan Earthquake Based on Resonance Effect
Investigation of Coal Failure under Triaxial Compression by CT Scanning
A New Soil Classification Method Using Normalized CPT/CPTU Parameters Based on Modified Bayesian Model
Stability Analysis of Grouting Strengthening in the Goaf Underlying a Canal
Analysis on Rock Mass Around an Underground Crude Oil Storage Caverns in Containment of Groundwater Considering Fluid Solid Coupling
The Application of Grouting Technology for Governance of Mined-Out Area under Large Channel
Analysis of Multi-Crack Growth in Asphalt Pavement Based on Extended Finite Element Method
CT Image Analysis on the Meso-Damage of Construction Waste Recycled Brick
Geohazard Risk Assessment Method Based on Logistic Regression Model
Establishment of Index Factors in Geohazard Early Warning System
Elastic-Plastic Static Analysis of BRBF Steel Frame Structure
Research on the Seismic Performance of Construction Waste Recycled Brick Masonry Structure
Application of Crosswell Seismic Technology in the Fine Reservoir Description
Dynamic Characteristics of a New Space Beam String Structure with Outer Truss Torus
Generation of Internal Tides by Tide-Topography Resonance over Weak Topography: Analytical Calculation
The Mechanism of Internal Tide Generation over Weak Topography
Resist Liquefaction of Subsoil of Metro and Improvement of Segments of Shield Tunneling
Soil Stress of Shield Tunnel Face in Sands under High Hydraulic Pressure
The Earthquake’s Relative Location Algorithms Effected by Data Recorded at Nearby Station
Consequences of Land Use in an Intensive Region in North China Plain
Improvement on Xi’an Digital Seismic Telemetry Network
Application of a Geohazard Early Warning System in Huaying Mountain Region, Sichuan Province
Blasting Vibration Signals Time-Frequency Analysis Based on S-Transform
Chapter 14: Miscellaneous Researches for Tecnical Sciences
A Case Study of RFID-Enabled Payment Device
Design of Photonic Crystal Fibers Based Polarization Splitter with Hollow Ring Defects
Analysis to the Whiplash Effect in the Engineering Structure
Stability Analysis of Cd Contaminated Soil in Dabizhuang
Frequent Pattern Mining Based on Pattern Space Division in Map/Reduce Cluster
Research on the Relationship among Technological Progress, Rebound Effect and Energy Efficiency
Construction of Regulatory Boolean Networks Based on Expression Profiles Data Noise
The Global Attractor of the 3D Complex GL Equation and the Estimate of its Dimensionality
A Hybrid Treatment System Combining Enforced Diatomite Process Followed by Biological Aerated Filters for Wastewater Treatment
Residues and Spatial Distribution of Organochlorine Pesticides in Arable Land from Liaocheng
A Customer-Focused Electricity Bill Pay Points Siting Model
Numerical Simulation of Building Strength when Foundation Subsides Unevenly
Research and Application of Collaborative Modeling for Prefecture-County Integrated System Based on Workflow Engine
Shading Effect and Optimal Tilt-Angle of Collectors in a Collector Array
Predicting Urban Runoff under Different Surface Conditions in Xi’an, China with DRAINMOD
Research on Energy Efficiency of Embedded Systems: A Systematic Mapping Study
Attitude Change on the along Track Interference Baseline and Moving Target Velocimetry in the Distributed Satellite SAR System
Study on the Blanket Effective Area Model of Active Jammer Fixed in the Missile Aimed to Shipborne Radar
Predicting Duct Height in Atmospheric Duct by Neural Network
Personal Future Transport Development
Segmentation of Adhering Cell Images Based on Two-Dimensional Histogram
Research of Lighting Technology Based on the OpenGL
Evaluation of Traffic Safety of Curved Section with Gray Theory Based on the Driving Track
Thin Cloud Removal Approach for Yellow River Remote Sensing Onitoring
Dealing with the Bottom Intersection Problem in Isopycnic-Coordinate Models Using the Flooding Algorithm
The Behaviors of Internal Solitary Waves near the Continental Shelf of South China Sea Inferred from Satellite Images
The Deposit Features and Comprehensive Information Prospecting Model of Mengyejing Potash Deposits in Yunnan Province
On Asymptotically Non-Expansive Self-Maps in Metric Spaces and Related Stability of Dynamic Systems
Design and Energy Analysis for Eco-Community Based on Constructed Marine Wetland
Service Based E-Learning System Model Using IRT
A Study of Crime Predictive Modeling Using a Variable
A Novel Method for Jaccobian Matrix of 6PUS Parallel Mechanism
Development of CEM in Relation to Subsurface Electromagnetic Scattering
