Buch, Englisch, 1238 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2400 g
Buch, Englisch, 1238 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2400 g
ISBN: 978-3-03785-947-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Welcome Address and Committees
Chapter 1: Materials Engineering and Processing Technologies of Materials
Effect of Bi2O3 Addition on the Microstructure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3-Bi0.5(Na0.93K0.07)0.5TiO3 Ceramics
Effects of Grain Size and Lubricating Conditions on Micro Forward and Backward Hollow Extrusion of Brass
Effect on Vibroengineering of Material Deterioration in a Scale-Down Reinforced Concrete Containment Vessel Specimen
Preparation and Investigation of Co-Dispersed MWCNT Buckypaper for the Microwave Absorption
Direct Heating Billet within Die during Hot Forging Process
Using Soft Material as Die during Hot Forging
The Characterization of Alumina Reinforced with CNT by the Mechanical Alloying Method
Transparent Conductive Oxide GZO Thin Films by Sol-Gel Process
Nonlinear Evolution of the Travelling Waves in Roll Coating Flows of Thin Viscoelastic Polymer Falling Films
Photo-Electronic Properties of Titanium Dioxide Nano Thin Films
Step-Stress Accelerated Degradation Testing of NBR Sealing Ring
The Friction Characteristics and Microscopic Properties of Composite Electroplating Thin Films
Preparation and Characterization of Cubic and Rod-Shaped Indium Tin Oxide Powders Using the Hydrothermal Process
Effect of ZnO Seed Layer and TiO2 Coating Treatments on Aligned TiO2/ZnO Nanostructures for Dye-Sensitized Solar Cells
Tuning the Torsion Mechanical Properties of Carbon Nanotube by Feeding H2 Molecules
Atomic Layer Deposited Al2O3 Barrier Layers on Flexible PET Substrates
Study the Rheological Property of Gel Abrasives in Magnetic Abrasive Finishing
Experiment on Intermittent Gas Jet Assisted Modulated Fiber Laser Drilling
Temperature Effect on Mechanical Properties of Aluminum Film
Artificial Photosynthesis of Formic Acid Using Iron Doped TiO2
Graded Silicon Nanostructure Arrays for Tailoring Antireflection Performances
Thermoelectric Properties of Transition Metal Deposited MWCNT Buckypaper
Morphology and Microstructure of Aggregates and Gelation Behaviour of Poly(3-hexylthiophene) in Xylene Solution
Small Scale Effect on Nonlinear Vibration of Fluid-Loaded Double-Walled Carbon Nanotubes with Uncertainty
Determination of the Optimal Locations for Injection Molding Gates with Higher Order Response Surface Approximations
Chapter 2: Optoelectronics and Optical Systems
Simulation of Broadband Transmission Photonic Crystal Waveguide Crossing with Linear Taper
A Study on Measurement of Photoplethysmograph Using a Smartphone Camera
A Simulation Study of the Treatment Effects for the 1064 nm Nd:YAG Laser under Various Fluence and Pulse Durations
Assessment of the UVB Transmittance Measurement Uncertainty in Conformity with ISO/IEC 17025
Compound Optical Film Using Gray Scale Mask Embedded with Micro-Voids
Design of Secondary Optical Element for a Two-Reflector Solar Concentrator
Integrated Multi-Object Taguchi Method with Optical Design for Contact Lenses
Improvement on Zhang's Camera Calibration
Video Matching by One-Dimensional PSNR Profile
Chapter 3: Machine Parts and Mechanisms, Design and Manufacturing
An Investigation into Optimized Ti-6Al-4V Titanium Alloy Equal Channel Angular Extrusion Process
Design of a Magnetic Gear Set with Low Torque Ripple
Heat Transfer of Oscillating Fluid through Finned Heat Sink with Top Bypass Clearance
Reducing Cogging Force of a Permanent Magnet Transverse Flux Linear Synchronous Motor
Design and Optimization on Active Engine Mounting Systems for Vibration Isolation
Harmonic Analysis and Filter Design for the Light Rail Transit Systems
Modeling of a Shape Memory Alloy Beam and its Stochastic Chaos
Parametric Study of a Micromixer with Convergent-Divergent Sinusoidal Walls
Design and Manufacturing of Drug Eluting Depot Stents with Micro-Sized Drug Reservoirs
Finite-Element Analysis of the Magnetic Field in a Magnetic Gear Mechanism
Kinematic Analysis of an 8-Speed Bicycle Transmission Hub
Ground Vibration Characteristics for High-Speed Trains on Embankments
Dynamic Response of a Viscoelastic Damping Isolator under High Cyclic Loading
Thermal Performances in Ribbed Rectangular Convergent and Divergent Channels
Finite Element Analysis of Bridge-Vehicle System with Randomness
Design of Geneva Mechanism with Curved Slots
The Study and Fabrication of Electron Field Emission Module for Next-Generation Multi-Beams Lithography Applications
An Adaptive Parameter Tuning Method with On-Machine Weight Identification Function for CNC Machine Tools
Heat Transfer of Oscillating-Move Pin-Fin Heat Sinks with Circular Impinging Jets
Performance Improvement of a Hidden Ceiling Fan
The Design of Heat Pipe Heat Exchanger for CO2 EGS
Optimization of Circular Diamond Saw Blades with Annular Slots
Effects of Metal Hydride Absorption in Reactor with Annular Finned Tube Heat Exchanger
Magnetic Assisted Laser Percussion Drilling
An Electric Wheelchair with Function of Climbing up and down a Step
The Meshing Efficiency Analysis of Coupled Planetary Gear Reducer
A Study on the Optimization Design of BOP Gantry Crane by ANSYS
Stress Distribution Analysis of Different Types of Blade for a Fermentation System
Optimal Design of the Single-Mode Piezoelectric Actuator
The Design of Multiple Function Acoustic Horns for Ultrasonic Welding of Plastic
Five-Axis NC Program Conversion for Inclined Plane Machining
The Impact of Bicycle Suspension on Pedaling Forces
Development of a Virtual Milling Machining Center Simulation System with Switchable Modular Components
Hysteretic Nonlinear Characteristics and Stochastic Bifurcation of Cantilevered Piezoelectric Energy Harvester
Optimal Yield Rate in ACF Cutting Process of TFT-LCD Module Using Orthogonal Particle Swarm Optimization
An Optimal Design for New Electromagnetic Valve in Camless Engines
The Dynamic Analysis and Simulation of Electric Scooter
Study on Bevel Gear Worm Forging by Finite Element Analysis
The Characteristic Analysis of Interrupted Flow Pulsation on Ultrafiltration System
Pressure Distribution in the Air Film and the Porous Conveyor Air Bearing
Dynamics of a Quadruped Walking Machine
Magnetostatic Field Analysis of Disk-Type Permanent-Magnet Motors
Using ADAMS Application on Mechanism Simulation of New Multiaxis Machines
An Integrated CFD and Experimental Study of the In-Line Fan
The Characteristic Comparison of the Accelerometer and the Gyroscope Using the Pendulum Model of Body Sway
Heat Transfer of a Double Layer Microchannel Heat Sink
The Analysis of Magnetorheological Brake Structure with Multiple Poles
Seismic Response for a One-Third Scale-Down Vertical Cylindrical Cask Specimen Using Cyclic Loading Testing
Microstructure Design of Surface Permanent Magnet and Tooth Surface Stator in Brushless DC Motor with Low Rare Earth Material
Stability and Dynamic Analysis of the Electrostatic MEMS Actuators
A Compact Planar Inverted-F Antenna for Octa-Band Operations of Smart Handsets
Chapter 4: Medical Machinery and Technologies, Innovative Developments
Application of Artificial Neural Networks for Diagnosing Acute Appendicitis
Study on Biohydrogen Production of Dark Fermentation with the Stimulation of Ultrasonic
Implementation and Validation of ECG-Derived Respiration with QRS Characteristics
A Newly Developed Polyurethane Prosthetic Heart Valve
The Measurement of Anesthesia Depth Using Biomedical Signal during General Anesthesia
The Effects of Application Site and Time of Vibration Stimulation: Changes in Gait Pattern and Muscle Activity
Different Frequency Bands of Electromagnetic Wave on Age-Related Developmental Changes
L2-EMD Filter Design for Photoplethysmography Signal
Supervised Neural Networks for the Automatic Classification of Leukocytes in Blood Microscope Images
Analysis of Non-Fourier Thermal Behavior in Layered Tissue with Pulse Train Heating
Chapter 5: Electronics, Electrical Engineering and Power Electronics
Contour Data Acquisition System for Electric Vehicle Distance Estimation Method
FPGA Implementation of a High-Speed Two Dimensional Discrete Wavelet Transform
Low Phase Noise Voltage Controlled Oscillator Using Cascode and Current-Reuse Techniques for Radio Frequency Circuits
Time-Frequency Bands of Electromagnetic Wave from ERPCOH on Developmental Changes
In-Plane Electromagnetic Generator Fabricated on Printed Circuit Board Technology
Wide Area Input Stabilizer for Damping of Power System Inter-Area Oscillation
Development of Serial-Connected High Step-Up DC-DC Converter with Single Switch
Chapter 6: Energy and Power Engineering
Application of TRACE and FRAPTRAN in the Spent Fuel Pool of Chinshan Nuclear Power Plant
LAPUR6 Stability Analysis on Power/Flow Map of Lungmen ABWR
Potential of Solar Farm Development at UTM Campus for Generating Green Energy
Impact of a Large Scale PV Generation System on the Distribution System
Development of Intelligent Solar Panel Cleaning System with Fuzzy Logic Theorem
Elman Neural Network for Dynamic Control of Wind Power Systems
Design and Analysis of a Novel Hybrid Solar/Gas Dish Stirling System (HS/GDSS)
An Active Islanding Detection Method for Grid-Connected Renewable Energy Generation System
Comparison of Three Short Term Photovoltaic System Power Generation Forecasting Methods
Optimal Penetration of Photovoltaic Systems in Distribution Networks
HCPV Module Temperature Prediction: A Case Study Based on Measurements at NPUST
Effect of Geometry on Energy Absorption of Reduction Tubes Using a Die - A Numerical Study
Chapter 7: Automation and Control
An Integrated Realization of Motion Control and Motor Drives with FPGA
Direct Adaptive CMAC PI Control for Uncertain Nonlinear Systems with Measurable Output Feedback
Whole-Body Human-to-Humanoid Motion Imitation
The Development of a Hybrid Antilock Braking System Using Magnetorheological Brake
Optimization of the Neural Muscular Drive and Respiratory Signals under Dead Space Loading and CO2 Inhalation
Development of an Automatic Optical Inspection System and its Application to Defect Examination
Design of Flight Control System Bus Controller of UAV Based on Double CAN-Bus
A Wireless Sensor Network Deployment Planning Tool to Support Building Automation
Cryptanalysis and Improvement of Secure Key Distribution for the Smart Grid
Study and Design of Smart Embedded Home System Based on Wireless Electric Power Measurement Monitoring System
Home Security Service and Condition Control
Chapter 8: Sensors, Mechatronics and Robotics
Hysteretic Nonlinear Characteristics of Giant Magnetostrictive Sensors
Safety Assessments for Wearable Robot Suits
Calibration of RGB-D Sensors for Robot SLAM
Experimental Evaluation of a Small-Displacement Sensing System Based on the Surface Plasmon Resonance Technology in Heterodyne Interferometry
A Study on FBG Vehicle Loading Sensing System
Structure Design of the Biaxial Piezoelectric Actuated Stage Using a Novel Disk Piezoelectric Actuator
Stepping Experiment and Characteristics Analysis of a Novel Biaxial Piezoelectric Actuated Stage
High Performance CO Sensors Utilizing Sprayed Distributed Toluene-Based Gold Nanoparticles
Development of a Laser Measuring Method for Small Displacement of a Thin Plastic String
The Design of Multi-Parameter Bio-Signal Sensor for Applying a Smartphone m-Health Service
Interpretation of the Oscillating Signals of the Smart NOx Sensors Used in Urea Selective Catalyst Reduction Systems via Spectral Analysis
Design of Photo Diode Sensors for Measuring Solar Light Orientation
Singularity Avoidance for a Redundant Robot Using Fuzzy Motion Planning
An Output Based Adaptive Iterative Learning Control with Particle Swarm Optimization for Robotic Systems
Distributed Control Intelligent Robotic Gripper
A Laboratory-Based Smart Grid Sensor Network Testbed
Discoid and Asymmetrical Micro-Satellite Propulsion Mode Attitude Control with Great Mass Change and without Angular Rate Sensor
A Fuzzy-Based Management for Power-Aware Wireless Sensor Network
A Centre Clustering Mechanism of Wireless Sensor Network
Motion Control of a Robot Arm
Enhance A* Searching Algorithm Applying in Multiple Robot System
A Cyclostationarity-Based Spectrum Sensing Scheme for Dynamic Traffic Circumstances
Distributed Tree Routing Scheme for Large-Scale Wireless Sensor Networks
A N-Hop Concentric Clustering Algorithm with Sub-Clusters in a Wireless Sensor Network
Chapter 9: Methods and Algorithms for Processing and Analysis of Data
Development of Causal Model of Four Parameters upon Statistical and Mathematical Analysis and Management
Using Maple to Study the Partial Differential Problems
Efficient Computational Workload Distribution on Heterogeneous GPUs
Fingerprint Identification Based on Mopso in SVM
Accelerometry-Based Motion Pattern Analysis for Physical Activity Recognition and Activity Level Assessment
Application of Maple on Evaluation of Definite Integrals
A Study on the Multiple Improper Integral Problems with Maple
Facial Expression Generated Automatically Using Triangular Segmentation
Refinement of Depth Estimation Method via Energy Minimization
Modeling and Simulation of the Optical Properties of Low-Speed Target in Near Space
Application of Maple on the Integral Problems
Application of Maple on Solving the Differential Problem of Rational Functions
An Artificial Evolutionary Approach for Solving the Nonlinear Constrained Optimization Problems
A Novel Unambiguous Correlation Function with a High and Sharp Main-Peak for BOC Signal Tracking
Image Contrast Enhancement by Hybrid 3SAIHT and CLAHE Algorithm
A Low Complexity Integer Frequency Offset Estimation Scheme Based on Coherence Phase Bandwidth for OFDM Systems
Face Recognition by Geometrical Feature-Point Bilateral Matching
Robust Observer-Based Output Feedback Control for Time-Varying Systems
Chapter 10: Computer and Information Technologies
Volumetric Model Body Outline Computation for an Object Tracking in a Video Stream
Efficient Scheduling for Real-Time Pinwheel Tasks on DVS Processors
A Method of Handling Missing Data in the Context of Learning Bayesian Network Structure
A Automatic Vehicle License Plate Location Based on Sobel Edge Method
Detecting Phishing Sites Using URLs Collected from Emails
Serum System: An Automatic Curing System for Worms and Buffer Overflow-Based Botnets
Impacts of Langauge Learning Based on Computer-Assisted Language Learning Instruction
A Novel Fuel Cell System Design by Using Ziegler-Nichols-Based Intelligent Fuzzy Controller
A Gesture Recognition Based on Accelerometer and Hidden Markov Model for Human Computer Communication
Optical Music Recognition for Numbered Music Notation with Multimodal Reconstruction
Color 3D Image Encryption Technique by Combined Use of Computational Integral Imaging Joint Image Scrambling Technique
A Cloud-Based Test Architecture for IPv6 SNMPv3 Agent
3D Integral Imaging Encryption Using a Depth-Converted Elemental Image Array
On the Security of the Discrete Logarithm Based Remote Authentication Scheme Using Smart Cards
A Secure Hybrid P2P Network Mobile Communication Device Design
An Enhanced Vehicular Information Dissemination Based on Back-Off Time Mechanism
Threshold-Based Privacy-Preserving Key Management Scheme for Vehicle-to-Grid Networks
Robust Exponential Stability for Uncertain Discrete-Time Switched Systems with Interval Time-Varying Delay via a Switching Signal
The Hybrid Differential Evolution with Dynamic Scaling Mutation and Wrapper Local Search for Optimization Problems
Implementation and Experiments of TDOA Monitoring Techniques for Broadcasting Interferences
Development of an Equipment Failure Identification Expert System with Multiple Reasoning Approaches
Classification of Chinese Popular Songs Using a Fusion Scheme of GMM Model Estimate and Formant Feature Analysis
Low Phase Noise and Low Power Voltage-Controlled-Oscillator Using Current-Reuse Techniques for Wireless Communication Circuits
Design of 3.1-10.6GHz CMOS LNA Based on Input Matching Technique of Common-Gate Topology
A Source Routing Protocol for Bluetooth-Based Sensor Networks
Development of Software-as-a-Service Cloud Computing Architecture for Manufacturing Management Systems Based on Virtual COM Port Driver Technology
Performance Analysis of Hybrid Fusion in Cognitive Radio Networks
Design of a Smart Green Energy Management System Based on DMX512 Protocol
An Innovative but Low-Cost Mechanism for E-Payment, E-Ticketing, and E-Identity Document: A Case Study of Multiple Perspectives in Innovation Management
Chapter 11: Environmental Sciences and Engineering, GIS
Frequency Analysis of the Motor Control Centers in a Nuclear Power Plant Using Testing and Simulating Methods
Seismic Testing and Verification for 30 Tons Scaled-Down Model of Reinforced Concrete Containment Vessel
Application of GIS on Rapid Evaluation for Potential Portal Areas of Tunnels
Preliminary Volcanic Seismic Hazard Analysis for Tatun Volcano Group in Northern Taiwan
Weibull Component Reliability Prediction with Masked Data
Life Cycle Carbon Dioxide Emission Assessment of Housing in Taiwan
Site Response Analysis for a Site with the Dipping Bedrock and Liquefiable Layers Using FLAC 3D
A Multi-Agent System for Multi-Level Based Environmental and Physiological Signal Monitoring and Analysis
Promoting Usage of Effective Rainfall in Pond Irrigation System
Chapter 12: Architecture, Civil and Industrial Engineering
Corrosion Risk of Stainless Steel Facilities in the Coastal Regions of Taiwan
Corrosion Risk of Welded Steel Frames in the Urban Areas of Taiwan
A Study on the Deterioration of External Wall Tiles on RC Buildings in Taiwan
The Interaction between Adjacent Structures with Different Foundation Levels under Earthquake Loading
Novel Pile-to-Pilecap Connection Under Lateral Load
Improvement of Accelerated Weathering Test through Physicochemical Analysis for Polymeric Materials in Building Construction
A Study on the Deterioration Condition and Renovation Work for High-Rise Reinforced Concrete Apartment in Japan - The Practice Project Kajima Corporation Minaminagasaki Dormitory
The Construction Protest Management Study with NIMBY Conflict
Experimental and Analytical Investigation of Lateral-Torsional Buckling of RC Beams with Geometric Imperfections
Centrifuge Modeling on Seismic Behavior of Pile in Liquefiable Soil Ground
Influence of Angle Thickness towards Stiffness and Strength Prediction for Cold-Formed Steel Top-Seat Flange Cleat Connection
Development of Physical-Parameter Identification Procedure for Energy-Dissipated Buildings with Symmetric Ductile Braces
Modal Identification of Structures from Seismic Response Data via Amplitude-Dependent Time Series Model
Model for Evaluating Uncertain Project Duration Considering Construction Interface Problems
Seismic Rehabilitation of Beam-Column Joints Using FRP Sheets and Buckling Restrained Braces
Structural Behavior of a Steel Grid Shear Wall Subjected to Combined Axial and Cyclic Lateral Loads
Enhancing Collapse Detection and Alarms in Bridge Management
A New Damage Detection Method for Aging Offshore Platform Using Two Measurements
Chapter 13: Related Topics
Item Relational Structure Theory Based on Liu’s Improved Nonparametric IRT Theory
An Extensive Evaluation Design Approach to Quality Function Deployment
A Framework of Fit Status of Organizational Innovation: Based on the Typology of Organizational Lag
Research on Human Resource Strategy under Customer Demand Using System Dynamics for the Thin Film Sputtering Target Material Industry
Using RSSI Simple Localization Method to Implement the Context-Aware and Social Recommendation System
