Sonstiges, Englisch, Band Volume 877, 718 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 877, 718 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-0357-2050-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Fabrication of Cladding Billet in Diameter of 160mm/148mm by Direct Chill Casting ProcessMicrostructural and Mechanical Characteristics of Cladding Billets with Different Clad RatiosEffect of Direct Chill Casting Speed and Heat Treatment on Microstructure and Mechanical Properties of Al-13.9%Mg2Si CompositeEffect of Cooling Rate on Modification and Grain Refinement of 4032 Aluminum AlloyEffect of Compound Modification and Cooling Rate on Microstructure and Mechanical Properties of Al-25%Si AlloyThermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium AlloysMicrostructure and Mechanical Properties of Semi-Solid Die-Cast A356 Aluminum Alloy6000 Series Aluminium Alloy Strip Casting Using a Vertical Type Twin Roll CasterMicrostructural Evolution of Al-Mn Based Alloy Fabricated by Vertical-Type High-Speed Twin-Roll CastingApplication of Vertical-Type High-Speed Twin-Roll Casting for Up-Grade Recycling and Clad Sheets Fabrication of Aluminum AlloysStudy on Thermal Physical Properties of Al-Si8-Cu2-Mg AlloyImproving the Corrosion Resistance of Hot-Working Mold Steel against Al Alloy Melt by CoatingSupersaturation Behavior of Al Solid Solutions and its Effect on Tensile Property in Al-7Si-xMg Alloys during Solution Heat Treatment (x: 0.4 and 0.8 Mass%)Evaluation on the Accuracies of Sump Depth Measurements during DC Casting Process of 7050 AlloyEffect of Electromagnetic Field on the Macrosegregation Behaviour of Al-Cu Alloy Ingot Prepared with Direct-Chill Casting ProcessTensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus TemperatureStudy on Eutectic Microstructure and Modification Mechanism of Al-Si AlloysGrain Refinement in an Al-Zn-Mg-Cu Casting IngotEffects of Si Addition on the Microstructure and Tensile Property of Al-xMg Alloys with Al2Ca during Heat Treatment (x: 5 and 7 Mass%)Research of Preparing Parameters in the Complex Process on Microstructure in Semisolid A356 Alloy Slurry with Micro-Addition of LaEffects of Ti Powder Additions in Melt-SHS Process on the Performance of Al-Ti-B Grain Refiner AlloysInfluence of Die Casting Temperature and T1 Treatment on the Microstructure and Properties of the Alsicumg AlloyInvestigation of Phosphorus-Containing Compounds in Aluminium Alloys with Emphasis on the Formation MechanismEffects of Si Content on the Tensile Strength and Machinability of Al-Mg-Si-Cu-Mn-Cr AlloysDetection of Quench Induced Precipitation in Al Alloys by DilatometryEffects of Homogenization Treatment on Dispersoid Characteristics and Recrystallization Behavior in an Al-Zn-Mg-Cu-Zr AlloyStress Induced Precipitation during Quenching of Aluminium AlloysThe Effects of Ni Content and Intermediate Annealing Condition on Recrystallization of Al-Fe-Ni-Si Alloy Fin StocksEffects of Mn and Cr Additions on the Recrystallization Behavior of Al-Mg-Si-Cu AlloysRole of Pre-Deformation on Aging Precipitation Behavior of Al-Cu-Li AlloysThe Effect of Cryorolling on the Microstructure of Al-Cu-Mg AlloyInfluence of Wiper Height on 7A55 SlabsQuantitative Measurement of Strain Field around ?' Phase in a 7000 Series Aluminum AlloyThe Influence of Extended and Variable Pre-Stretching on the Strength of AA2195 Alloy Taper-Rolled PlatesNew Progress on Er-Containing Micro-Alloying Aluminum AlloysRecent Advances in Research and Industrial Technologies for Aluminum Alloys in JapanApparent Morphology and Structure of Iron-Rich Phase in Aluminum AlloyA Combined TEM and Atom Probe Approach to Analyse the Early Stages of Age Hardening in AA 6016Effect of the Deformation Parameters on the Microstructure of TiC-Al2O3P/Al CompositesAPT Investigation of Effect of Minor Zr on Precipitation Strength of Al-Sc AlloyAbnormal Effects of Temperature and Strain Rate on the Ductility of a Carbon Nanotubes Reinforced Al Alloy CompositeQuantitative Phase Analysis of Aluminium-Lithium AlloysEffect of Annealing Conditions on Recrystallization of AA5182 SheetEffect of Novel Thermomechanical Treatment on Microstructure and Properties of 6156 AlloyEffects of Mn and Zr Addition in 6000 Series Aluminum Alloys on the Formation of Stabilized Substructures during Hot DeformationPhase Composition, Texture and Mechanical Properties of 80 mm Plates of Al-2.8Cu-1.7Li-0.5Mg-0.5Zn-0.1Zr-0.06Sc AlloyEffects of Homogenization Conditions on the Microstructures of Twin-Roll Cast Foil Stock of AA8021 Aluminum AlloyEffect of Solution Treatment on the Properties and Microstructural Evolution of Al-Zn-Mg-Cu-Er-Zr AlloyCombined Effect of Cold-Rolling and Aging on Precipitation and Recrystallization Behavior of Al-Er-Zr AlloyEffect of Natural Aging of 6xxx Series Extrusions on the Energy Absorbance CapacityThe Effect of Heating Rate on the Density and Spatial Distribution of Dispersoids during Homogenisation of 6xxx Aluminium AlloysGrain Growth Behavior of AlMg5 Alloy Fabricated by Using a New Mg Mother Alloy Containing Al2Ca during Homogenization and Hot CompressionEffects of Mg and Mn Contents on Hot-Rolling Temperature and Resultant Tensile Properties of Al-Mg-Mn AlloysStudy of Hot Deformation Behavior of 6082 Aluminum AlloyStudy on the Ageing Process of the 6xxx Series Aluminum Alloy Wires for Overhead ConductorsStudy of Texture in 6016 Aluminum Alloy during ProcessingFriction-Stir Welding of Zr-Modified AA5083 Sheets in Different ConditionsEffect of Forging Temperature on Deformability and Structure Evolution of High Purity Aluminium during Multi-Directional Forging ProcessA Study on the Deformation Dehaviours of Al-1.4Fe-0.2Mn Alloy SheetsMicro Structural Changes in Welded AlCuLi-Alloys by Positron Annihilation Spectroscopy, SAXS and DSCStudy on the Formability of Aluminium Alloy Sheets at Room and Elevated TemperaturesPrecipitation Behaviour and Mechanical Properties during Short-Term Heat Treatment for Tailor Heat Treated Profiles (THTP) of Aluminium Alloy 6060 T4Effect of Dispersoids on Long-Term Stable Electrical Aluminium ConnectionsCorrelation between Fracture Toughness and Quantitative Characterization of Microstructure in 7055 Aluminium AlloyEffect of Microstructure on Impact Energy of an Al-Mg-Sc AlloyQuantification of Fatigue Weaklinks in High Strength Al AlloysMicrostructure and Mechanical Properties of 6013 Aluminium Alloy Processed by a Combination of ECAP and Preaging TreatmentCharacterization of Intergranular Corrosion Defects in a 2024 T351 Aluminium AlloyPartial Melting, Segregation Behavior and Nanomechanical Properties of AlCu2Si1Mg0.6 AlloyEffects of Sn Addition on Clustering and Age-Hardening Behavior in a Pre-Aged Al-Mg-Si AlloyDirectionality and Column Arrangement Principles of Precipitates in Al-Mg-Si-(Cu) and Al-Mg-Cu Linked to Line Defect in AlThe Study of Ingots and Deformed Semi-Finished Products of Al-Mg-Sc and Al-Cu-Li Alloys Using Diffraction MethodsCharacterization of Roping on AA6xxx Alloy Sheet by Numerical Analysis for Surface TopographyCorrosion of Aluminium Aerospace AlloysIntergranular Corrosion Mechanism of Brazed Al-Mn-Cu-Si AlloyOptimization for Anodizing Conditions of 5A06 Aluminum Alloy Based on Doehlert Design Matrix MethodResponse of Microstructure in High Strength Aluminium Alloy to Graff Sargent EtchantThe Effect of Mg Content on Intergranular Corrosion of Al-Mg-Mn Alloys after AnnealingAbout the Role of Hydrogen in Stress Corrosion Cracking of a 7xxx Aluminium Alloy (Al-Zn-Mg)Corrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid SolutionComputational Simulation of Localised Corrosion in Anodised AA 2099-T8 Aluminium-Lithium AlloyEffect of Heat Treatments on Stress Corrosion Behavior of 7050 Al Alloys in 3.5% NaCl SolutionRefinement of Primary Silicon Crystals by Novel P-Doped ?-Al2O3 Particles in Solidification of Hypereutectic Al-Si AlloysSimilar and Dissimilar Ultrasonic Spot Welding of 5754 Aluminum Alloy for Automotive ApplicationsStudy of an Accelerated Aging Process for Conductive Aluminum AlloysProcessing Map and Microstructural Evolution of Isothermal Compressed an Al-Mg-Si-Cu-Zn AlloyPrecipitation of ScAl3 Phase during Solutionizing and Ageing of Hypoeutectic Al-Sc Alloys and its Impact to Mechanical PropertiesEffect of Homogenizing Treatment on Microstructure and Property of Al-Zn-Mg-Cu-Zr Aluminum AlloyEffect of Zn, Mg, Cu, Zr on Microstructure and Properties of Laser Welding Aluminium AlloyDevelopment of TiB2 Dispersed Aluminum Composites by Spark Plasma SinteringEffect of Solution Treatment on Microstructure and Mechanical Properties in an Al-9.3Zn-2.0Mg-1.8Cu AlloyPreliminary Investigation into the Suitability of 2xxx Alloys for Wire-Arc Additive ManufacturingCold Stamping of 6061 Al Alloy Assisted by Arc Welding PretreatmentA Novel Methodology for Optimization of Properties, Costs and Sustainability of Aluminium ExtrusionsStudy on the Improving Method of Needle-Like ?-Fe Phase in Al-Si-Cu Casting Alloy for Engine Cylinder HeadModelling of the Age-Hardening Behavior in AA6xxx within a Through-Process Modelling FrameworkEffects of Heat Transfer Coefficients on Quenching Residual Stresses in 7055 Aluminum AlloyNumerical Analysis of Wavy Interface Formation and Successive Temperature Change in Magnetic Pulse Welded Al/Cu JointModelling of Strain-Path Transients in Commercially Pure AluminiumOptimized Design of Aluminum Cross Car Beam (CCB) Based in Modal Strain Energy AnalysisCharacterization and Modelling of the Damage Behavior of Extruded Aluminum Profiles for Crash SimulationsMultiscale Approach for the Damage Modeling of an Aluminum Casting Alloy with Stochastic CharacterRolling Texture Simulation of Aluminium Sheets Based on the Mechanism of Intergranule Reaction StressesEffect of Natural Ageing on Strength and Anisotropy in Aluminium Alloy AA 6005C
