Chemical Engineering and Material Properties III
Erscheinungsjahr 2014
ISBN: 978-3-03835-230-3
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 2014 4th International Symposium on Chemical Engineering and Material Properties (ISCEMP 2014), June 28-29, 2014, Taiyuan, China
Buch, Englisch, 772 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1450 g
ISBN: 978-3-03835-230-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Material Science, Technology and Application
Structure Evolution of Fe-Mn Based Alloys under a Near-Rapid Solidification Process
Orthogonal Experimental Study on Tool Wear in Machining CFRP with CVD Diamond Film Coated Tool
High Temperature Properties of Asphalt Modified with Two Kinds of OMMTs
Improvement of Crystal and Optical Properties of ZnO Film Grown on Hydrogen-Implanted Compliant Si Substrate
Effect of Intercritical Hardening on Properties of 60Si2Mn Steel
Quantitative Analysis of the Element Silicon by Laser-Induced Breakdown Spectroscopy
A Novel Method to Order Nanowire Based on Macrofludic System
Atomistic Simulation of the Self-Diffusion in Very Thin Cu (001) Film by Using MAEAM
Research on the Mixing way and Content of Molybdenum Disulfide with Copper Matrix Self-Lubricating Composites
The Influence of Materials Properties on the LSPR Strength of Nanoshell Particles
Ultra-Thin Shellac Fibers Fabricated Using Two Different Electrospinning Processes
Study on Influence Factors of Cement-Free Binding Material Based on Fly Ash and Slag
The Analysis of Nano SiO2 Impacting on the Frost Resistance of EPS Lightweight Concrete
The Effect of Metal Source on the Preparation of Metallofullerenes
The Review of the Application of Graphene/Chitosan Composite
Application Research of Orthogonal Analysis for Components Selection of Heat-Resistant Concrete
Selection Research on Materials of Heat-Resistant Concrete Based on Range Theory
Trial-Preparation of RSS Based Composite Containing GF
Study of the Preparation and Properties of Carbon Nano-Tubes Doped TiO2/Glass Fiber Reinforced Plastics
Preparation and Performance Testing of Flexible PDLC Films
The Crack Tip Fields for Anti-Plane Crack in FGPM of x Linear Function
The Higher Order Crack Tip Fields for Interfacial Crack between Linear Functionally Graded and Homogeneous Piezoelectric Materials
Performance Test and Evaluation for Pixel CdZnTe Detector of Different Thickness
Tests and Research on Characteristics of Shear Strength of Cement Improved Soil under Freeze-Thaw Cycle
Research on the Properties of Collapsible Loess Reinforced by Cement
Effect of Constant-Strain Aging on Microstructure, Martensitic Transformation and Magnetic Property of Ni53Mn23.5Ga23.5 Ferromagnetic Shape Memory Alloy
Influence of Laser Power on the Microstructure and Anti-Wear Performance of Laser Hybrid Plasma Spraying NiCr-Cr3C2 Coatings
Evaluating the Air-Entraining Concrete Performance Decay Rule under Long-Term Salts Corrosion Using MATLAB Software
Study on Micro Pore Structure Characteristics of Carbonate Cores of Low Permeability
Early Presumption on the 28d Strength of Cement-Clay Composite Powder Mixed Mortar
RTW Based Rapid Development of Hot Strip Mill Laminar Cooling Prediction Software
Color Metallographic Technique for Microstructure Analysis of Aluminum Alloy Weld
A Novelty Analysis Method of Solar-Pumped Laser with Fresnel Lens and Cr/Nd:YAG Ceramic
Effects of Mass Ratio of Phenolic Fiber to Quartz Fiber on the Ablative Properties of Hybrid Fabric Reinforced Composites
Electronic Properties of Au-Doped Narrow Armchair Graphene Nanoribbons: A First Principle Calculations
Study on Evaluation Index of Hard Machining Materials Based on the Application Feature
Research about Mining Method of II Gold Ore Body in Duolanasayi
Recent Advances in Centrifugal Spinning Preparation of Nanofibers
Effect of Gb on Phase Transformation and Martensitic Phase Transformation in Ni–Mn–In Alloys
Effect of Cryogenic Treatment on the Performance of Ultrafine Cemented Carbide
Strengthening and Application Research of Carburized and Subsequently Niobiumized 40CrNiMo Steel
Interaction Study of Carbide Precipitation and Impurity Segregation under Temper Embrittlement Conditions in a Coarse-Grained Heat-Affected Zone in Q690 Steel
The Application of Energy-Saving and Environment-Friendly Decorative Materials in Architectural Decoration Construction
Effect of Bending Speed on Forming Quality of 0Cr21Ni6Mn9N Stainless Steel Tube NC Bending
Compressing Deformation and Microstructure of AZ61 Magnesium Alloy
Effect of Y and Heat Treatment on Microstructure and Deformation Performance of ZK60 Alloy
The Effect of the Winding Materials on the Compression and Bending Properties of GFRP Bars
A Study on Thermal Spraying Sacrificial Anode Applied in Concrete Structure Cathodic Protection
Temperature Field Analysis of Circular Concrete Filled Steel Tube Reinforced Concrete Column under Fire
Progress in CIS Series Thin Films Solar Cells
The Design and Weaving of Glass Filament Spacer Fabric
Feasibility Study of Concrete Production Using Sea Sand Wased by Reclaimed Water
The k·p Interaction Calculations of Conduction Band and Valence Band of InN Materials
Surface Morphology and Dielectric Properties of KNN/PI Films
Preparation and Study on the Electric Properties of PI-Al2O3 /PI-TiO2/PI-Al2O3 Three Layers Nanocomposite Films
Investigation on the Morphology and Dielectric Properties of PI/SiO2 Nanocomposite Films
Experimental Study on Aggregate RAC
Study on Piezoelectric Effect and Magnetic Properties of Tourmalines
Theoretical Analysis of Efficient Terahertz Difference Frequency Generation in Periodically-Inverted GaAs Crystals
Study of Characterization Methods on the Particle Size of SMG
Research Progress for Gypsum Retarder
Removal of Coal-Fired Pollutants Using a Novel Composite Collector in a Wet Electrostatic Precipitator
The Influence of Nano-Montmorillonite on High Temperature Performance of Asphalt
Preparation and Application of Water-Based Fire Retardant of Ammonium Phosphate
WP Enhanced PVA/LRSS Composite
Preliminary Research on One Multiband Smoke Material Preparation
The Current Situation and Prospects of the Stability of Microcapsule Phase-Change Suspension`s Manufacturing
Effect of Low-Temperature Plasma Treatment on Surface Properties of LDPE Film
Analysis of the Flow Velocity of Heavy Oil Reservoir Flooding Vent Complex Process
The Preparation and Test of Green Water-Based Metal Cleaning Agent
Seafloor Polymetallic Sulfides Mechanical Property Test
Based on Shape Annealing Algorithm Single Crystal Finite Element Analysis
Based on Tabu Algorithm Heat Treatment Analysis of the Alloy
Dynamic Compression Behavior of Ti-6Al-4V Plates Prepared by a Single Electron Beam Cold Hearth Melted Ingot
Preparation of Medical Low-Temperature Wood-Plastic Polycaprolactone Composites and their Properties
Electrospun PLGA/SF Modified with Electrosprayed Microparticles: A Novel Biomimetic Composite Scaffold for Vascular Tissue Engineering
The Parameters Control of Recirculation Treatment for Leachate
Preparation of an Environmental Friendly Slow Release Nitrogen Fertilizer
Process Study on Green Treatment of Waste Anolyte
Facile Biomimetic Fabrication of Hollow Hydroxyapatite with Hierarchically Porous Microstructure Using Hyperbranched Gemini Surfactant as Template
Pretreatment Techniques for Arsenic Speciation Analysis in Biosamples
The Chemical Constituents Study in the Root of Astragalus membranceus
Chapter 2: Chemical Engineering and Technology
Synthesis of Graft Copolymer of Starch-Acrylamid-Propylene Hydroxamic Acid and Capability of Trapping Pb2+
Studies on the Chemical Constituents in the Essential Oil from the Leaves of Cinnamomum Bodinieri Levl
Magnetism and Half-Metallicity in (100) Surface of Inverse Heusler Mn2CoSb
Synthesis and Characterizations of Poly(Butylene Succinate) Copolyester
Study of Porous Plate Hydrodynamic Cavitation Device for P-Nitrophenol
Study on Spin Transport Properties in Transition Metal Atoms Interfered Alpha-Graphyene Nanoribbon Systems
Preparation of Chitosan-Diatomite Adsorbent and Adsorption to Cu(II) in Waste Water
Effect of Gamma Irradiation on the Migration of Di(2-Ethylhexyl) Phthalate from Plasticized Poly(Vinyl Chloride) into Air and PVC Resin
Stable and Metastable Phase Equilibria of the Lithium-Containing Salt-Water Systems
Phase Chemistry and Thermal Chemistry on the Calcium-Containing Brine Systems
Phase Equilibria of the Aqueous Systems Containing Magnesium and Borate Ions
Processes on the Thermodynamic Properties of Lithium Borates
Rubidium and Cesium Recovery from Brine Resources
Phase Equilibria of the Aqueous Lithium-Containing Carbonate Systems
The Influence of Donor-Doped Content on PTC Effect of Ba-Excess BaTiO3 Based Ceramics Fired in Reducing Atmosphere
The Ammonia Leaching Method of Recycling the Spent Copper-Chromium Oxide Catalysts
Acid Properties of MCM-36 Molecular Sieve and its Catalytic Behavior in Benzene Alkylation with Propylene
Synthesis and Electrochemical Performances of Nanoscale TiO2 as Anode Material for Lithium Ion Batteries
Preparation Nano-Sized ZnO/Ag Particles and Photocatalytic Degradation of UDMH Wastewater
Application of Modified Carbon Molecular Sieves for Air Separation Based on Adsorption Kinetics
Study on Nano-Diamond Cathode Field Emission and Characteristics of Luminescence by Electrophoresis
Interfacial Wetting Behavior under Low-Density Ultrasonic Field and Solvent - Assisted Wet Condition
Preparation and Properties of Nylon 6/66 Copolymer with a Small Proportion of Hexamethylene Adipamide Salt
Thermal Conversion Characteristics of Coal Tar Soft Pitch at Atmospheric and Elevated Pressures
The Mineralization of Calcium Carbonate in Mixed Solvent Controlled by Polystyrene-b-poly(vinyl pyrrolidone)
Cobalt Ion Extraction by 2-Ethylhexyl Phosphoric Acid Mono-2-Ethylhexyl Ester Microemulsion Saponified
Study on Effect of Sericin on Size and Shape of Silver Nanoparticles Prepared by a Redox Method
Blue Phosphorescent Organic Light-Emitting Diodes Based on Biphenyl (Spiro[fuorene-9,9'-yanthen]-2-yl) Phosphine Oxide Host
Preparation and Photocatalytic Activity of Titanium Dioxide-organosilicone-Heteropolyacid Photocatalysts
Study on Extraction of Mesophase from Steel Slag by Potassium Hydroxide-Sucrose (KOSH) Solution Method
Solvent-Free Oxidation of Benzyl Alcohol by 30% H2O2 over LDH Hosted Chromium Complex
Study on Nano-Hydroxyapatite Assisted Preparing by Ionic Liquids
Cyclic Oxidation Resistance of Co-10Cr-5Al-0.3Y Alloy at 800 oc
Study on Kinetics of Nano-Ni(OH)2 Powder Ethanol Desorption Process
Transient Photoelectrochemical Analysis of the Semiconductor Properties of Oxide Films on Alloys
The Influence of Donor-Doped Content on PTCR Effect of (Ba1-xSmx)TiO3 Based Ceramics Prepared by the Reduction Sintering-Reoxidation Method
First Principles Study on Adsorption for Different Concentration of H2S on Fe(100)
The Plasma Treatment Influence on the Adhesive Wafer Bonding by the PDAP
Interaction between Enrofloxacin and the Extracellular Polymeric Substances from Platymonas Subcordiformis
Influence of Evaporation Temperature on the Morphology, Polymorph and Mechanical Properties of Poly(vinylidene fluoride) Solution-Cast Membranes
Progress in Research of the Combined Adsorption-Photocatalysis for the Removal of Volatile Organic Compounds
Phase Equilibrium Study at 220°C of Li+,Mg2+//Cl-, SiO32--H2O Systerm
Investigation on the Fano Line Shaped Raman Modes of the Hydroxyl and Deuteroxyl Cobalt Chlorides
Factor Group Analysis on the Deformed Pyrochlore-Structure Hydroxyl Transition Metal Halides
Research on the Effect of Calcined Mg/Al Layered Double Hydroxides on Fluoride in Water Based on Adsorption Kinetics Model
Corrosion Rule and Amendment Method Research on the Natural Gas Long-Distance Pipeline in the Northwest Region
Study on Preparation of RGB Tricolor Up-Conversion Fluorescent Powder
Determination of Ruthenium in Waste Ruthenium-Loaded Carbon Catalyst Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-OES
Synthesis of Substituted Ethyl Argiosulfonylcarbamates
Synthesis of One Novel Thieno[2,3-D]Pyrimidine Derivative Bearing a Sulfonylurea Moiety
Isotope Analysis on the Recharge Source of the Leakage Water behind the Right Dam of Suzhi Hydroelectric Station
The Degradation of Chitosan Using Hydrodynamic Cavitation with NaNO2 Enhancement
The Respond Characteristic Property in Different Temperatures of SAW Sensor with p-tertbutylcalix[4]arene Coatings to Detect DMMP
Synthesis of Calixarene Derivatives in One Reaction System
Adsorption and Diffusion of Aluminum, Gallium and Indium Atoms on Semi-Polar Gallium Nitride Substrate Surface: A First Principle Simulation
Efficient Enantioselective Michael Addition of Nitroalkenes Catalyzed by a New Surfactant-Type Thiourea Organocatalyst in Water
Doping with Metal and Compound to Improve the Properties of Hydrogen Storage of MgH2
Synthesis and Optimization of Trimethylolpropane Rapeseed Oil Ester
The Synthetic Process of Disperse Peach SE-RL
Research of Microwave - Ethanol Auxiliary V2O5-WO3/TiO2 SCR Catalyst Regeneration Experiment
Preparation and Visible-Light Photocatalytic Activity of Cu2O/PVA/Chitosan Composite Films
Influence of Preparation Time on Electrochemical Impedance Spectroscopy of the Dodecafluoroheptyl-propyl-trimethoxysilane SAMs on Aluminum Alloy 6061
Nitrogen Removal by River Systems of the Feng River Basin in China
Variation of pH during the Carbonation of CaCl2 and its Effect on the Concentration of CO32– and the Ratio of [Ca2+] to [CO32–]
Study on the Field Emission of Titanium-Based Nanodiamond Diode Structure by Electrophoretic Deposition
The Adsorption of Cu2+ onto Chitosan-Aluminium Oxide Composite Material
The Adsorption of Chitosan-Aluminum Oxide Composite Material to Mercury Ions
Coal Preparation Circulating Water Treatment Using Coarse Tail Coal-Slime as Filter Medium
Study on Corrosion of X80 Pipeline Steel in Different Water Content of Soil
Frequency Domain Analysis and Application of Electrochemical Noise of X80 Pipeline Steel
The Design and Experimental Study on the Lance of the Cement Industry Flue Gas Denitration Technology
Preparation and Characterization of TiO2/Coconut-Activated Carbon Photocatalytic Materials
Preparation and Characterization of the Rejuvenator Seal Materials with Fluid Catalytic Cracking Flurry
Growth of Semi-Insulating GaAs Crystal with Uniform Si Doping
New Material Research and Application for Few Piece Leaf Spring of Heavy Vehicles
Synthesis of Microstructured ZnO in Hydrazine Hydrate Using a Hydrothermal Method and its Optical Properties
Microstructural Characterization of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by Spray Deposition Process
Corrosion Inhibition of Polyethylene Glycol for Magnesium Alloy AZ91 at Different Temperatures
Experimental Investigation on the Liquid Distributor Performance for the Falling Film Evaporation Process
Saving Ladle Control Model of Steel Ladle in Steelworks
Intestinal Absorption, Pharmacokinetics and Tissue Distribution of Gossypol Nanosuspensions
Preparation and Characterization of Gossypol Nanosuspensions
A Biomimetic Approach to Enhancing Interfacial Interactions: Polydopamine-Coated Silica as Reinforcement for Epoxy Resin
Control the Pollution of Pig Farm’s Manure Wastewater and Resource to Cultivate Microalgae
Dairy Farming Simulated Organic Wastewater of Degradation Experiment by Hydrogen Peroxide
Synthesis of Hydroxyapatite Microspheres with Rutin as Template
An Improved Particle Swarm Optimization Based on Biological Chemotaxis
