Advances in Manufacturing Science and Engineering
Erscheinungsjahr 2013
ISBN: 978-3-03785-724-3
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 4th international Conference on Manufacturing Science and Engineering (ICMSE 2013), March 30-31, 2013, Dalian, China
Buch, Englisch, 3442 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 6400 g
ISBN: 978-3-03785-724-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Metals and Its Alloys
Effect of Fluoride Conversion Coating on Corrosion of Behavior of Mg-Ca-Zn Alloy
Effects of Electrolyte Plasma Carbonitriding on Tribological Properties of High Speed Steel
Modification of Stainless Steels Surface Layers by Nitriding and Carbonitriding
Heat Treatments of W6Mo5Cr4V2Si High Speed Steel
Temperature Prediction Model for Molten Steel in RH Refining Process
Technique Equipment Parameters Design of Titanium & Titanium Alloys Oxidizing for Large Area and Batch-Type Production
Study on Mechanical Properties of High Aluminum Zinc-Based Alloys with Different Al Contents Ranging from 30 wt% to 50 wt%
Modeling of Non-Isothermal Austenite Formation in Cr5 Roller Steel
Asymmetric Cyclic Deformation Behaviors of Hot-Rolled AZ91 Magnesium Alloy in Rolling Direction
The Study of Ferrosilicon Alloy Sediment Horizon Metallographic Etchant
Study on Preparation of Ferrosilicon Alloy Deposition In Situ Melting Salt Production Power
Electro-Deposition Methods Influence to Ferrosilicon Organization
The Phase Transformation and Magnetic Properties in Ni-Mn-In Alloys
Deformation Heating and Its Effect on the Processing Maps of Ti-15-3 Titanium Alloy
Study of Precipitation in the Heavy Plate of VN Micro-Alloyed HSLA Steel
Extreme Pressure Property of Rare Metal Zirconium
Friction and Wear Behavior of 45# Steel with Different Plant Abrasive
Effect of Single Pass Hot Rolling on Goss Texture Development in Twin-Roll Cast Silicon Steel Strip
Test Study on Fatigue Property for Forging and Casting Steels of Grade E
Experimental Research on Hot Working Property of Monel K-500 Alloy
Study on Microstructure and Mechanical Properties of 35CrMnSiMo Cast Steel
Development of Wear Resistant Cast Steel and Its Study on Mechanical Properties
Chapter 2: Composites and Polymers
Preparation and Tribological Performace of Microcapsules of Butyl Stearate and Melamine-Formaldehyde Resin
Preparation and Characterization of Nanocrystalline Cellulose/Natural Rubber (NCC/Nr) Composites
Effect of Surface Oxidation at 1500 °C on Flexural Strength and Thermal Shock Resistance of the ZrB2-SiC-ZrC Ceramic
Product Distribution and Sulfur Migration in Rubber Pyrolysis
Synthesis and Characterization of Ethyl Cellulose Based Acrylate
Self-Recovery and Re-Degradation Phenomena for PZT Ceramic
Properties of Water-Soluble Core-Materials Applied for LRTM
Preparation and Characterization of Novel Naturally Renewable Resin Acid Based Monomer
Study on the Nanocomposite Foam of Cardanol Phenolic Resin and Organo-Modified Montmorillonite
Research on Bandwidth of 1-3-2 Piezoelectric Composite with Multi-Mode
Seed Adsorption Synthesis and Characterization of PMMA/PAN Particles with Core-Shell Structure
Polythiophene-Coated Polystyrene Core-Shell Nanoparticles with a Rod-Shaped Polythiophene Shell
Study on Electrical Properties of Activated Carbon Black Filled Polypropylene Composites Using Impedance Analyzer
Effect of Carbon Black Surface Treatment on the AC Electrical Properties of PP-Based Composites
Synthesis and Rheological Properties of Poly (AM-TBAM-NMMAD) Random-Block Copolymer
Effect on Flame Retardancy and Mechanical Properties of PA6 Nanocomposites with Addition of OMMT and PFR
Calculation of Internal Stresses of Continuous Fiber Reinforced Composite Materials in Longitudinal Loads
Study on Preparation and Properties of Ramie Fiber Reinforced Composites
Thermo Physical Properties of Copper/Diamond Composites Fabricated by Spark Plasma Sintering
Chapter 3: Micro/Nano Materials
Study on Attenuation Characteristic of Carbon Nanomaterials Smoke to Laser
Analysis for Extinction Capability of Carbon Nanofibers by Moment Method
Solid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium 8-Quinolinolate
Synthesis and Micro-Wave Absorption Properties of BiFeO3 Coated Fe Nanocapsules
Synthesis of CoPt Nanoparticles by Reduction of Co(CH3COO)2 and Pt(acac)2
Preparation of Monodisperse Iron Nanoparticles at Low Temperature
Hydrothermal Synthesis, Characterization and Optical Properties of Zn-Doped CdS Dendritic Nanostructures
Energy Transfer of PVK/ SiO2 Nanometer Composite Films
Chapter 4: Functional Materials
Research on the Activation System of Lead-Acid Battery
Preparation of La0.75Sr0.25Cr0.5Mn0.5O3-dNanometer Powders by Sol-Gel Method and Research about its Electrochemical Performance
Ferroelectric and Ferromagnetic Properties and Magnetoelectric Coupling Effect of the Ba0.8Sr0.2TiO3/CoFe2O4 Heterostructure Film by Radio-Frequency Magnetron Sputtering
Effect of Temperature and Applied Bias on Deflection of PZT Actuators with Different Metal Slides
Synthesis and Characterization of a New Amino-Functionalized PMO Material
Synthesis of Sodium Tungsten Bronze via Hydrothermal Method Assisted by Citric Acid
Effects of Annealing in Different Atmosphere on the Near-Infrared Shielding Properties of CsxWO3 Particles
Theoretical Study on Ni2XIn (X=Mn, Fe and Co) Magnetic Shape Memory Alloys by Ab Initio Calculations
In Situ Testing and X Rays Radiation Effects of Pt/Bi3.15Nd0.85Ti3O12/Pt Ferroelectric Capacitors
Study on Preparation of Octyltrimethoxysilane
Characteristics of 2D Cylindrical Photonic Crystals Band Gap with Square Lattice
Chapter 5: Energy Materials
Numerical Simulation of Nc-Silicon PIN Solar Cells with AMPS-1D
Electrochemical Performances of Li4-xKXTi5O12 (x=0.02, 0.04, 0.06) as Anode Materials for Lithium Ion Battery
GC/MS Analysis of Products from Catalytic Hydroconversion of Dagang Vacuum Residue with Y Zeolite
The Effect of Boric Acid Addition on the Performance of a Gelled Electrolyte
Thermodynamic Behavior of SiH2Cl2 in Polysilicon Production by Siemens Process
Electrophoretic Deposition of TiO2 Films on Metal Mesh for Dye-Sensitized Solar Cells
Aluminum Hydride Polymorphs: Preparation, Characterization and Thermal Properties
Effect of Heat Treatment Technology on Property of Sodium-Sulfur Battery Cathode Carbon Felt
Enhanced Light Absorption and Minority Carrier Lifetime for Pn+ Multicrystalline Silicon by Treatment with HF/H2O2-Based Solutions
Chapter 6: Surface Engineering/Coatings
Improvement of Working Efficiency of Cutting Tools by Modifying its Surface Properties by Application of Wear-Resistant Complexes
Correlation of the Microrelief of the Surface of Structure and Magnetic Properties of Oxidic Coverings on the Titan
Research on Load-Carrying Performances of Magnetic-Fluid Lubrication for Mill Oil-Film Bearing
Non-Smooth Characteristic on Biological Surface and Development of Bionics Non-Smooth Diamond Bit
Laser Glazing of Peacock Blue Glaze on Porcelain
The Temperature-Sensitive Behaviors of SMPU/PNIPAM Semi-IPN Films
In-Situ Synthesized WC Particles Reinforced Fe-Based Composite Coating by Argon Arc Cladding with Tungsten Powder
Experimental Study and Modeling of the Zinc Coating Thickness
Research on the Relationship between Bionic Surface Friction Coefficient and Interface Medium
Improving the Efficiency of the Cutting Tools Made of Mixed Ceramics by Applying Modifying Nanoscale Multilayered Coatings
Plating Hard Chrome Plating Alternative Technologies - HVOF Tungsten Carbide Coating
Prediction of Leakage Based on the Change of the Surface Topography
Study on Al Coating and Black Passive Film on Steel Surface
Chapter 7: Environmental Materials and Environmental Protection, Biomaterials and Microbiology
Study on Browning Degree of Fresh-Cut Purple Sweet Potato and its Inhibition during Storage
Preparation and Research of Porous Hydroxyapatite Whiskers/KGM Composite Bone Scaffolds
Beneficiability Study of the Blast Furance Dust from Tangshan Iron and Steel Company
The Manufacture and Nutritional Analysis of the Solanum tuberosum Jam with Material Properties
Effects of Temperature on the Growth and Product Accumulation of Chlorella sp.
A Theoretical Model Research of Rice Water Stress Index Based on Automated Infrared Thermal Imaging
Rapid Biomimetic Deposition of Drug-Loaded Apatite Coatings
Characteristic of Bamboo Paper Sludge by Means of Fourier Transform Infrared and Elemental Analysis
Environmental Dyeing Technique - The Application of Low Liquor Ratio Dyeing
Application of TOPSIS Model Based on Vague Set Entropy in the Evaluation of Groundwater Quality
Spatial Distribution and Assessment of Soil Heavy Metals in Suburb Cropland, Suzhou City, Anhui, China
As Pollution Evaluation of Vegetable Planting Soil in Suzhou City
Copper Pollution and its Assessment of Roadside Soils in Suzhou City
Analysis and Assessment on Heavy Metal Contamination of Tuo River in Suzhou
Combined Corrosion and Fatigue Degradation of Nitinol Implants
Effect of Wet Storage on Return Yellow Performance of High Yield Chemical Pulp
Removal of Cadmium Ions from Aqueous Solution by Nanostructured Carbonated Fluorapatite Bearing Siliceous Phosphorite
Effect of Membrane Bending Stiffness on the Deformation of Erythrocytes
Rapid Identification of Microorganisms Isolated from Pickled Vegetables by MALDI-TOF Mass Spectrometry
Assessment on Pollution Level and Ecological Risk of Heavy Metals in Pond Sediment of Suburban District
The Preparation of Micro-Molecular Dextran in Sub-Critical Water/CO2
Supercritical Carbon Dioxide Extraction of the Fatty Acids from Pacific white Shrimp Waste (Litopenaeus vannamei)
Preparation of e-Polylysine Modified Silica Nanoparticles
Screening of Biosurfactant-Producing Bacteria
Time Change Rule and Source Identification of Nitrogen and Phosphorus Pollution on Huihe River in Suzhou City
Adsorption of Cr Ion by Activated Carbon Prepared from Corncob Xylitol Residue
Adsorption of Corncob Hydrolysis Residue on Cr (VI)
Evaluation of the Measurement Uncertainty of Monosomic Ginsenosides in Ginseng
First Principle Study on Mn-Doped Ceria with Different Doping Concentration
Chapter 8: Processing Technologies of Materials and Minerals
Numerical Simulation and Process Optimization of Aluminum Alloy Connecting Rod Based on ProCAST
Research of the Grinding Mode Applied by the Cranfield BoX Ultra Precision Grinding Machine
The Discussion of the Relationship between Grinding Efficiency and Three Kinds of Factors in the Mill
Method & Case Study of Cutting in Offshore Structural Member Removal
Study on Short Stroke Control in Roughing Stage of Continuous Hot Strip Rolling
Micro Machining Simulation Analysis by Finite Element Method
Chemical Mechanical Grinding Wheel for K9 Optical Glass
Research Status and Development Trend of Magnetically Controlled Welding Technology
Experimental Study on NO Pre-Oxidation in C3H6/NO/N2/O2 Mixture by Non-Thermal Plasma
The Optimized Design of Manufacturing Process of Shrub Scrimber
XPS and Spectroscopic Ellipsometry Study of Composite SiNx/DLC Prepared by Co-Deposition of RF Magnetron and Filtered Cathodic Arc
Research on the Processing Method of the Special Tool Pear-Shaped Needle in Spinneret Manufacturing Industry
Process Optimization and Properties of Laser Cladding High Vanadium High Speed Steel Coatings on Nodular Cast Iron
Hot Forging Die Composite Manufacturing Technology
Simulation Analysis of Four Teeth End Mill Cutting Process Based on the FEM Method
Microstructures and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints
Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging
Research on Simulation Process of Rock Broken by TBM Hob
Research on Bending Angels of Laser Peen Forming without Confine Layer
The Impact Analysis of Stamping Process Factors Based on Dynaform
Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints Using Homogeneous Welding Wire
An Approach to Improve Thickness Uniformity of TA15 Tubular Part Formed by Gas Bulging Process
Study of Hot Deformation Behavior in GH4169 Superalloy
Springback Distortion Research on Offset Strip Fin Based on ANSYS
Characteristics of YAG-MIG Hybrid Welding 6061 Aluminum Alloy with Different States
Device and Experiment of Incremental Draw Forming of Dish
Thermal Deformation Property and Constitutive Model of AZ80 Magnesium Alloy
Process Design and Thermal Performance in Deep Drawing of SiCp/2024Al Composite Sheet Using Pulse Current Heating
Research and Application of Finite Element Method on the Simulation of Graded Self-Lubricating Ceramic Tools
Comparison of Methods for the Sulfur Compounds and Elemental Sulfur Analysis in High-Sulfur Natural Gas
Transient Liquid Phase Bonding of T91 Steel Using Two-Step Heating Process
Study on Microstructure of a Gear Shaft during Hot Forging Process
Laser Cladding Device for In Situ Repairs of Marine Crankshafts
Effect of Finish Rolling Deformation Conditions on Microstructure Refinement of Ultra-Deep Drawing Hot Rolled Steel Sheets
Study on Process Parameters of Low Frequency Torsional Vibration Tapping of Difficult to Cut Materials
Analyse and Control Research about the Cause of Shape Defects on Hot-Rolled Strip Steel
The Research on Two-Component Materials Mixed Method for Vacuum Casting
The Prickle and Pressure Comfortability Evaluation of T/R/H Multi-Component Fabric
Finite Element Analysis on Residual Stress of Laser Brazing Diamond Wheel
Improved Flotation of Oolitic Hematite Ore Based on a Novel Cationic Collector
Study on Cross-Flow Solid-Liquid Separation Technology
Numerical Simulation for Distribution of Void Fraction in Water Model of Continuous Casting Mold
Exploiting the Influence of Oxidization on Ultra-Fine Copper and Nickel Sulfide Containing Pt-Pd in Yunnan Mine
The Optional Study of Refined Feldspar Processing from Kyanite Tailings
The Research and Evaluation of Double Excitation Inorganic Adjustable Plugging Agent
Study on the Evaluation Method of Deep Profile Control and Flooding Effect
The Construction, Problems and Solutions of Yunnan Germanium Technology Chain
The Influence of Cooling Water Flow to Purify the Metallurgical Grade Silicon by Directional Solidification
The Kinetic Research on the Disperse Dyeing Process for PLA Fabric
Numerical Simulation of Low-Permeability Fractured Reservoirs on Imbibition
Die Compensation Design for Stamping a High Strength Automotive Bumper Inner
Chapter 9: Building Materials, Construction and Architecture
Investigation and Design Analysis on Residential Area Lighting in Dalian
Study on Large Stadium Space Layout Planning
The Role of the Media Facade Art in the Development of the City
Dynamic Stability Analysis of Steel Concrete Composite of Ribbed Shell under Stepped Loads
Dynamic Stability Analysis of Steel-Concrete Composite Ribbed Shell
Research on the Architectures and Murals of DongYue Temple in Jin Memorial Temple
Gymnasium Building Materials Performance-Type Research
Interactive Analysis between Steel-Concrete Composite Deep Beam and Steel Frame
Study on Humanization Design of Overall Kitchen
Comparative Analysis of Different Types of Rigid-Pile-Reinforced Embankments
Study on the LED Media Facade in Urban Space Using Analysis
Study of Seismic Inversion Technology Forecasting Sandstone Waterborne of Coal Roof
The Study on the Warm Mix Asphalt Mixture Ratio
Research on Longitudinal Cracking Behavior of Prestressed Cconcrete Hollow Slab due to Cyclic Loading Experiment
Design and Heat Transfer Property of the Warming Compound Blocks Contained Slag Concrete
The Study of Correction Method for Soil-Water Characteristic Curve of Swelling-Shrinking Soil
Succession and Development of the Traditional Commercial Centers
Study on the Architectural Design with the Conception of Low Carbon
Ecological Development of Building Materials
The Standardization of Government Supervision Procedure in Construction Engineering Quality (Security)
Effect of Foaming Temperature and Holding Time on Foam Glass
Creating Structural Analysis Model from IFC-Based Structural Model
Properties of Alkli-Activated Slag Cement Compounded with Soluble Glasses with a High Silicate Modulus
Numerical Simulation of Masonry Wall under Explosive Load inside
Study on Preparation of Construction Waste Paving Brick
Research in the Preparation of Paving Bricks with Construction Garbage
Use of Septic Tank Sludge as Raw Material in the Manufacture of Bricks
Economic Indicators Optimization of Rectangular Concrete Filled Steel Tubular Axial Compression Components
Probability Assessment of Analysis of High-Rise Buildings Seismic Resistance
The Effect of Utilization of Geogrids on Reducing the Required Thickness of Unpaved Roads
Building Energy Conservation Technology Based on Solar Energy Utilization
Dewatering Design and Discuss of Foundation Pit Excavation in Disposal Site with Contaminated Soil
Bearing Capacity of Concrete-Cored DCM Pile Composite Ground
The Birth and Use of Concrete and Reinforced Concrete
Study of Surface Modification of Recycled Aggregate and Mechanical Properties of the Resulting Concrete
Performance Analysis of Reinforced Concrete Structures Strengthened with BFRP
Bulk Density of Bitumen Sheets
Application of Catastrophe Theory in Surrounding Rock Stability
Resistance of Soil to a Vertically Vibrating Pile
Technology Research on the Subsidence Control of Abutment Back under Seismic Liquefaction Conditions
Chapter 10: Analyze and Design of Structures: Strength and Robustness
Research on Recrystallization and Crack Fracture of Single Crystal Turbine Blade
Simulation and Experimental Mechanical Properties of SiCn/2024 Al Alloy Co-Continuous Composites
Three-Dimensional Modeling and Finite Element Analysis of the Hydraulic Support
Fatigue Analysis of the Bridge-Type Grab Ship Unloader Based on Finite Element Method
Analysis of the Design Method for the Casual Anchor Skeleton at the Closure for PC Continuous Box Girder Bridge
Modal Analysis of Compressor Impeller with Crack and Blade Fracture
The Finite Element Analysis of a Shaft
Numerical Simulation of Deflection Fracturing with Finite Element Method Considering Crack Initiation Angle
Static Characteristics Research of Bed with Three-Point Support Using Bionics
The Finite Element Analysis of Pile-Raft Foundation after Optimization of the Raft Thickness
Stiffness Calculation of Boiler Horizontal Support
Impact Resistance Research of Composite Laminate Structure
Transmission Parameters Optimization Design and Load Factor Formula Fitting of WN Gears Drive
Influence of Screw Spacing on the Strength of Self-Drilling Screw Connection for the High Strength Cold-Formed Steel
Pressure Cooker with Composite Bottom Thermo-Mechanical Coupling Simulation
Determination of Residual Fracture Toughness of Post-Fire Concrete
Material Flaw Sizing by Ultrasonic Multipath Detection
The Broyden Method for M-P-F Relationship of Beam-Column with Residual Stresses
A Software of Pre-Buckling Analysis of Laminated Plates and Shells Based on Stiffness Matrix Determinant
Structural Analysis and Improvement of Large-Scale Forklift's Wheel Rim
Based on Micromechanical Damage of Experimental Study on 20 Steel Notched Specimen's Acoustic Emission Characteristics
The Progressive Optimization Model on the Corrosion Rate of the Grounding Grid
Research and Application of Material Corrosion Prevention Technology in the Completed well System for Sour Gas well
Chapter 11: CAD/CAE/CAM: Theory and Practice of Application
Solidworks Engineering Drawing Automatically Adjust Technology and Implementation
Research of 3D Parametric Design System of Worm Drive Based on Pro/E
The Study of ANSYS-Based Finite Element Calculation Model for Push-Back Rack
FEM Analysis of Hydraulic Dismantling Feasibility on Shaft-Sleeve Interference Fits
Research on Precise Constraint Reconstruction of Section Data
Numerical Simulation on the Flow Field inside an Ultrasonic Water Meter
Finite Element Analysis of the Car Door Sinking Stiffness
Handling and Roll Prediction of Electric Drive Mining Trucks
A Simulation Platform for the Development of Vehicle ACC Systems
The Helmet Reverse Forming and Static Characteristic Analysis
Study on Entity Model's Fast Surface Reconstruction
Parametric Design System of Precision Forging Gear Die
Design and Development of the Loading Subsystem in FEM System
A Static-Stability Analysis Method for Ships Based on the Second-Development of Solid Edge
Finite Element Model and Fluid-Structure Interaction Analysis of the Intravascular Stent
Exploration of Non-Revolved Parts Modeling Based on MBD and Pro/ENGINEER
Cone Section Member Integration Design and Production Methods
Based on OOA Modeling of Gantry Crane CAD System
BIM-Based Integrated Design Software for the Steel Structure of Industrial Plant
Second Development of Panel Furniture Based on Pro/E
Chapter 12: Mechanical Engineering: Research, Development and Solutions
Simulation Study about Dual Spark Plug Position for the CNG Engine Combustion Process
Study on Numerical Simulation and Performance of the Secondary Throttle Choke Used in the Oil Field
Simulation of Kinematics and Dynamics of Large-Displacement Motion Simulator
Finite Element Analysis about the Influence that High-Speed Motorized Spindle Spindle System Material has on its Temperature Field
Analysis on the Error of Semi-Infinite Body Model in Roll Flattening Calculation
Numerical Simulation of Tip Vortex in Air Refueling
Simulation and Analysis of the Hybrid Bus Performance Based on AVL-Cruise
Design of Amplitude Transformer for Ultrasonic Vibration Milling System Based on ABAQUS
Parameter Studies for Wheel Wear Using a Flexible Wheelset
Testing and Modeling of Mechanical Parameters in Resistance Welding Machines
Stability Analysis of Chatter System on Ultrasonic Honing
Parametric Study of Graphite Insert Erosion
Numerical Simulation of Two-Phase Flow under High Acceleration in SRM with Submerged Nozzle
Numerical Simulation of Cavity Flow within the Flow Field
Numerical Simulation of Flow in Imported Steam Turbine Inlet Components with Equilibrated Holes in High Performance
3D Numerical Simulation of the Influence of AGD Beams on Gas Distribution in COREX-3000 Shaft Furnace
The Research on Structure Design of LED Fluorescent Lamp Microstructures Diffuser and the Effect on the Optical Properties
Effect of the Light Diffuser Plate of Micro V-Cut Prism Structure on the Optical Property of LED Daylight Lamp
Finite Element Analysis of Grinder Plate with Bone-Removal Facilities
Development of an Advanced Machine Tool for Combined Forming-Strengthening Process for Production of Load Bearing Aircraft Panels
Hybrid MPI + OpenMP Parallelization of Scramjet Simulation with Hypergraph Partitioning
Intelligent Optimization Design on Brake Experiment Platform
Design of Beam Waveguide Antenna Structure for TT&C Ship
Stability Features of the Saucer-Shaped Blend-Wing-Body Aircraft
WEDM Performance Analysis Based on Entropy Fuzzy Evaluation
Impact Factors Analysis of Buildup Well Test in Low Permeability Reservoir
Effect of the Ignition Time on the Turbocharged Lean-Burned CNG Engine
Optimization of the Anode Current Collector Layer Thickness for the Cathode-Supported Solid Oxide Fuel Cell
Numerical Simulation on Cylinder Flow Field of Diesel
Study on the Motion Response of Buoy in Sea Condition
Experimental Research on Belt Type of Precision Seed-Metering Device
Research on Parameters Indentification of Synthesis Load Model Considering Distribution Network Connection
The Study Based on LABVIEW of the Positioning Accuracy of Spinneret Microporous Fine Machine
Study of Eddy Electromagnetic Fields Induced by Propeller Rotating in the Earth's Magnetic Field
Nonlinear Dynamic Analysis of Rub-Impact Rotor System under Different Parameters
The Analysis of the Pulverized Coal Deposition in the Pump Cylinder in Drainage and Mining of the Coal Bed Methane (CBM)
Research of Potential Energy Recycling System on Port Tyre Cranes
Designing Piezoelectric Harvesting Unit from Road Vibration
The Development of the High-Voltage Modulators Based on TM703FB Vacuum Tube for Auxiliary Heating on HL-2A
Numerical Simulation of Swirling Burner in Cold State
Test of Coal Slime Pumping by Single-Screw Pump
The Testing and Research of a New Large Bag Filter with the Diaphragm Valve
The Research of the Dynamic Characteristics of Horizontal Jig Boring Machine
A Cosserat Rod Model of Multi-Symplectic Structure and its Numerical Treatment
Dynamic Analysis and Simulation of a New Steering Mechanism for Point-the-Bit Rotary Steerable System
Transmission Ratio Optimization of Large Bus with Optimization Goal Normalization Processed
Asymmetric Sinusoidal Motion Effect on Aerodynamics of a Plunging Airfoil
Vibration Analysis of Complicated Rotor-Bearing System by Beam Element and Strain Energy Method
Kinematics Analysis and Simulation of Main Components of Beam Pumping Unit Based on MATLAB
Performance Simulation Comparison of Five-Plunger-Type and Three-Plunger-Type Straw Fuel Forming Machine
Design and Testing of a Scroll Pump Efficiency
Review on the Dynamics of High-Speed Motorized Spindle System
Mode Analysis of Lattice Main Boom for Crawler Crane Based on ANSYS_WORKBENCH
The Application Research of the Hydraulic Breaking Hammer
The Underwater Vehicle Cabins Wave Loads Linear-Simplified Calculation Method
Launch Dynamic Characteristic of High Initial Velocity Grenade Launcher with Low Recoil
Study of Influence on Auto-Weapon Launching Performance by Nozzle Structure
Analysis of Arc-Shaped Support Plate Influence on Muzzles Vibration of Gatling Gun Fire on Tripod
Research on Dynamics of High-Efficiency Recoil-Reducing for Muzzle Brake of Chain Gun
Modeling and Acceleration Response Analysis for Vehicle Drivability
Reliability Analysis of Nuclear Power CNC Wheel Groove Milling Machine Based on Gray Theory
Finite Element Analysis of the Spindle Ram-Slider Assembly Body on the Domestic Large Gantry Machine Tool
Modal Analysis of the 1.5MW Wind Turbine Tower
Structural Non-Probabilistic Reliability Analysis Based on Imperialist Competitive Algorithm
A New Response Surface Method for Structural Reliability Analysis
Design and Simulation of Piston Buffering Device for Impact Hammer
Structure Design of Precision Horizontal Machining Center and Multi-Objective Optimization of Large Structural Components
Axial Compression and Energy Absorption Characteristics of Reduction Tubes Using a Die under Impact Load
Interval Perturbation Method to Structural Non-Probabilistic Reliability Analysis
Numerical Research on Ship Motions in Oblique Irregular Waves
Dynamic Characteristics Analysis of Axle Box Spring by FEM
Effect of Wheel-Rail Contact Geometry Relationship on Vehicle Dynamic Performance
The Dynamic Simulation and Strength Analysis of the Integrated General Suspension Rack Connector for an Ejection System
Research on Ship Swaying Motion Prediction Based on Multi-Variable Chaotic Time Series Analysis
Study on Precision Analysis and Simulation Test of Upper Slicing System
Applied Research of the Microstructure Replication Technology
Research on the Key Technology in Ultra-Precision Machining of Optical Micro V-Groove Mold Roller
Chapter 12: Mechanical Engineering: Research, Development and Solutions
Thermal Error Analysis and Compensation Technology for High Precision Aspheric Measuring Platform
Blade Blending and Torsion Deformation Analysis Based on its Coordinate Measurement Data
Modeling Aspects of Sound Speed in Air for Ultrasonic Industrial Applications
Chapter 13: Thermal Engineering: Theory and Applications
Three Calculation Methods for the Influence of Heat Loss by Infiltration
Study on the Heat Transfer Performance of Two Kinds Material for Microstructure Heat Exchanger
The Effect Analysis of Fin Arrangement on Thermal Hydraulic Performance of a Vehicular Cooler
Performance Analysis of Solar Evacuated Tube Collector
The Exergy Efficiency and Output Acoustic Power Performance Optimization of the Thermoacoustic Engine Micro-Cycle
The Energy Consumption Investigation of the Hotel Central Air-Conditioning System and the Research of Energy Saving Measures
Effects of External Window Form on Residential Building Energy Consumption
Thermodynamic Performance Analysis of Stirling Engine with a Nodal Analysis Method
Numerical Study on High Prandtl Number Liquid Bridge
Numerical Simulation of the I-Beam during Cooling Process
Temperature Distribution of High Prandtl Number Liquid Bridge under Zero Gravity
Experimental Investigation on Effect of Stack on Thermoacoustic Conversion System Performance
Chapter 14: Vibration, Noise Analysis and Control
Order Vibration Analysis of High-Speed Spindle System
Research of the Vibration Signal for the Bridge Structure Base on Stochastic Minus Method
Investigation on Damping Characteristics of Double Chamber Hydro-Pneumatic Suspension Simulation and Experimental Research
Research on Compression and Reconstruction of Wind Turbine Vibration Signal Based on Discrete Cosine Transform
Research on a Building under Multi-Dimensional Seismic Excitations
Optimum Vibration Control of a Nonlinear Damper System under Multi-Axis Excitations
Parametric Studies of the Vibration Control Effects of a Nonlinear Damper System under Multi-Axis Excitations
Study on Acoustic Characteristics of Aircraft Targets' Propulsion System
Research on Anti-Seismic Analysis the Overall Structure of Three-Ring Roller Coaster Based on Response Spectrum Method
Chapter 15: Mechanical Transmission: Theory and Applications
The Contact Stress Analysis of Spiral Bevel Gear
Strength and Stiffness Optimization of Heavy-Duty Gear
The Method of Accurate Variable Curvature Crowning of Involute Straight Bevel Gear
Error Analysis of Modification Gear Generated by Grinding Worm Wheel
Optimization of Substituted Generating Lines of Cutting Hypoid Gears by Generating-Line Method
Three-Roll Planetary Rolling Mill Motion Analysis and Test Research
An Optimization Design Method of Gear Transmission
Chapter 16: Electronics, Microelectronics, Optoelectronics and Communication Technology
A Single Side-Band Modulation Circuit in Underwater Electric Current Communication
Research on Improvement of the Next Generation IEEE802.11ac Channel Model
A Three Phases Z-Source Inverter Topology
Two Dimensional Photonic Filter with a Circular Resonant Cavity
Design and Implementation of a Digitally Tunable Tracking Preselected Filter for Ultra Short Wave Receiver
Modeling and Control of the Voltage Source Converter
A Signal Generator Based on AD9850
A Study on 400V Sized Trench Power Semiconductor for Smart Power ICs
High Accuracy Modeling Method of UTC-PD Photodiode
A New Design of CMOS Bandgap Reference Based on Genetic Algorithm
Design and Power Supply‘s Quality Analysis of the Automatic Power Distribution System Based on SSPC
An Arc Welder Monitoring System Research and Design of High-Speed Camera Trigger
Tunable Low-Pass MEMS Filter Using Defected Ground Structures (DGS)
High Beam Quality and High Power Diode Laser Source
The Spontaneous Radiation of Verticalcavity Semiconductor Optical Amplifiers in Bistable Effect
Wave Shape Transformers Based on Transformation Medium Slabs
Throughput Analysis of IEEE 802.11e Enhanced Distributed Channel Access (EDCA) under Unsaturated Condition in One-Hop Ad Hoc Networks
Optimization of Power and Gain in Two-Stage Op-Amp by Using Taguchis Approach
BiCMOS Flip-Flop Design Based on NPN-NPN Feedback Driver Circuits
Chapter 17: Sensor Technology
Analysis of Signal Distortion Caused by Opening Ratio Variation of Main Scale and Index Scale in Linear Encoder
The Research about La0.75Sr0.25Cr0.5Mn0.5O3-d Application as Dense Diffusion Barrier in Limiting Current Oxygen Sensors
The Structure of the Hermetic Chamber in Convection-Based Tilt Sensor
The Mobile Node Localization Algorithm Based on Monte Carlo
Deployment of Wireless Sensor Networks for Air Quality Monitoring
Research of Electromagnetic Flowmeter with Grounding Electrode
Analysis of Quadrature Phase-Shift Error Caused by Angular Misalignment in Moiré Linear Encoders
WSN Collaborative Target Tracking Based on Dynamic Clustering
The Applications of Sensor Network for Smart Substation
Improvement Methods of Apparent Permeability of Ferromagnetic Core
Single-Resistance-Controlled Quadrature Oscillator Using CFOAs for GMI Magnetic Sensors
Dual-Mode Quadrature Oscillator Using Current Follower Transconductance Amplifiers for GMI Sensors
Research on Rotation Modulation for INS Based on MEMS Sensors
Application of Sensor on Modern Sizing Machine in Term of Intelligent Control
Research on Direct Calibration of Electromagnetic Flowmeter in Partially Filled Pipes
Using Numerical Simulation to Optimize the Design of Gas Turbine Flowmeter Sensor
Optimizing Design of a New Micro-Structural Gas Sensor
Analysis of Radial Thickness Vibration Modes of Piezoelectric Ceramic Ring Based on ANSYS
Design and Implementation a Testing Environment for Wireless Sensor Networks
The Effect of ESD EMP Test on Wireless Antenna and Protection Network Design
Path Planning of Mobile Beacon for Localization Based on Distribution of Unknown Nodes
Localization and Map Building of Laser Sensor AGV Based on Kalman Filter
Chapter 18: Technologies of Measuring, Detection and Monitoring in Industry
Application of Petrochemical Heat Equipments' State Inspection Based on Threshold Value of Infrared Image Segmentation
An Improved Faults Diagnosis Strategy of Analog Circuit Online Using Kernel Fuzzy C-Means for the Unknown Fault
Improved Method for State of Charge Estimation of Lithium Iron Phosphate Power Batteries
Ballistic Measurement and Parameter Estimation of Ballistic Missile with Early Warning Satellite
Tolerance Analog Circuit Hard Fault and Soft Fault Diagnosis Based on Particle Swarm Neural Network
Application of Adaptive Fuzzy Filter in Ultrasonic Test System
Analysis of Uncertainty in Standard Metal Tank Volume Verification with Monte Carlo Method
Research on Tooth Profile Deviations Measurement Method Based on the Optical Image Measuring Instrument
Summarize and Research on the Data Acquisition of Drilling Rig Hydraulic System
Research on the High-Precision Phase Simulation of DSSS Signal
Thermocouple Temperature Monitor System Based on PLC in Air Preheater
Design and Implementation of Environmental Monitoring System Based on Bus
The Improved Personnel Location Algorithm Based on RSSI
A Two Dimension Signal Parameter Estimation Method Based on Super Resolution Technology
Review on Meteorological Detector in Highway Mechanical and Electrical Engineering
Design of Alarm Controllers in Detection and Alarm Systems for Gases
A New Approach to Improve the Probability of Detection of Eddy Current Inspection
The Applied Research of System Subtractive Clustering RBF Algorithm in Eddy Current Testing on the Conductive Structure Defect
Quantitative Estimation with Lift-Off Effect in Conductive Structure
Research of Benzoyl Peroxide Residues in Flour by Terahertz Spectroscopy Technology
Study on Fault-Tolerant Technique Based on Knowledge Modules of Hydraulic Fault Theory
Overview of Ultrasound Imaging Algorithms Based on Synthetic Aperture Focusing Technique
Research on the Fault Diagnosis System for ICM
Analysis of Hydrostatic Guideway Error Based on Multi-Head Pump
Safety Analyzed and Detection Test of Unexploded Subprojectiles by Means of Some Metal Detector
The Research of Signal Processing in Ultrasonic Nondestructive Testing and Evaluation
Equipment/System Safety Design Process in Civil Aircraft Considering Structure-Support Requirements
Constant-Stress Accelerated Life Test with Competing Risks under Progressive Type-II Hybrid Censoring
Fault Prediction Based on Data Fusion
Study on Method of Reconnaissance Effect Simulation for Infrared Imaging Equipment
Research of Nozzle Divergent Section Detection Based on Modal Flexibility Curvature Difference Method
Faults Diagnosis of Converter Transformer Based on the Vibration Method
Chapter 19: Mechatronics
Research on the Electronic Differential Control Strategy of Electric Vehicle
A High-Performance Digital Servo Driver for Magnetic Levitation Planar Motor
Design of the Vehicular Eletro-Optical Tracking Turntable Servo System and the Research on its Tracking Control Scheme
Simulation Study on Jet Power Drive System of Quarter Vehicle
Comparing Study on Performance of Brushless Doubly-Fed Generator with Different Rotor Structures
Optimization Analysis of Structure Parameters for External Rotor DSPM Motor
The Research on the Ignition System of Engine Combustion Bomb
Research of the Tool Orientation Optimization with Kinematical Constraints
Digital Machining Simulation for Francis Hydro Turbine's Blade
Tool Path Generation for Local Interference Region Machining of Triangular Mesh Model
Simulation Research on the Shift Schedule in the Auto with Automated Manual Transmission Based on Cruise Gear Shift Program
Structural Design and Realization of Wheel-Legged Obstacle Crossing Vehicle
Structure Design of Transmissive Switch-Zoom Infrared Systems
Study of the Fuel Consumption of ECMS Applied to a HEV
Study on the Intelligent Control Technology for Wet Dual Clutch Transmission
Simulation and Analysis on Stationary Combination Valve of Heavy-Duty Vehicle Automatic Transmission
New Design of Reduction Device of Column Electric Power Steering System
Characteristics Analysis of Giant Magnetostrictive Actuator Applied in Jet-Pipe Servovalve
Breaking Deceleration Control of Urban Rail Vehicle Based on Smith Predictor
MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique
Fast Response MEMS VOA with Grid-Type Shutter
1×6 Compound-Driven Optical MEMS Device for Multifunctional Fiber Optic Communication
Genetic Algorithm Tuning PID Control of Magnetic Powder Clutch
The Research of High Reliability Secondary Power on Orbiting Carbon Observatory
Design and Implementation of the AMT Data Acquisition System Structure and Function
Research on the Real Time Simulation of HEV Motor Pre-Charge Using an Embedded Control System
Chapter 20: Industrial Robots and Manipulators
Real-Time Forward Position Kinematics of the Spatial Parallel Manipulator
Study on the Architecture and Motion Control of the Traverse Robot
Design and Simulation Analysis of a Hybrid Manipulator
Path Optimization of Spray Painting Robot for Zigzag Path Pattern
The Study on the Communication of the Multi-Robot Polishing System by the ACO Mode
Design and Development of the Trunk Spraying Machine
Study of Co-Simulation of Rehabilitation Robot for Upper Limb Based on Virtual Prototype
Proposal of Noncontact Operation Robotic Hand Using Permanent Magnetic Suspension
Study of Barrel Bending Measurement and Correcting Model with PSD and Gun Barrel Robot
Automatic Button Cell Sorting Manipulator System Research Based on Visual Servo Control
Forward and Inverse Kinematic of Continuum Robot for Search and Rescue
An Internal Model Control (IMC) Algorithm for Automatic Trajectory Tracking
Realization of the Postprocessor of Intelligent Turning-Milling Combined Machining Cell Based on UG NX
Simulation and Optimization Design of the Transplanting Manipulator
Research on Kinematic of the Wheel-Legged Robot Based on Uneven Road Surface
Chapter 21: Image Processing and Machine Vision
Design and Implementation of the Cold-Rolled Aluminum Plate Surface On-Line Defect Detection System
Complex Paper Disease Detection Based on Probabilistic Hough Transform
Investigation of Factors Influencing Calibration Accuracy of Camera
Texture Feature Extraction for Color Images Based on Quaternion Representation
Mine Loadometer License Plate Recognition Based on MFF-DS
Study of Motion Detection Technology Based on Davinci Platform
An Improved Suppressed FCM Algorithm for Image Segmentation
Moving Objects Detection and Speed Estimation in Intelligent Surveillance System
Arabidopsis Growth Analysis Using Image Processing Technology
An Approach to Detection of Solder Joints on Printed Circuit Boards
Target Recognition Based on Polar Coordinate Template Matching
New Camera Parameters Calibration Method of Binocular Vision System
The Application Research of Robot Vision Target Positioning Based on Static Camera Calibration
Research on Solder Joints Quality Detection of Auto Parts Based on Biological Vision Feature
A Sequential Structure from Motion Algorithm for Static Scenes Based on VR-Simulation
Chapter 21: Image Processing and Machine Vision
Image Registration Method Based on PCA-SIFT Feature Detection
Shot Cut Test Based on Mathematics Parameter and Chain Code
Extraction Method of the Contrast Feature of Ship Wake Images
A New Gradual Segmentation Algorithm of Fingerprint Image
Chapter 22: Intelligent Optimization Design and Algorithm
Local Piecewise-Linearity Prediction Method of Chaotic Time Series
INS/GPS Integrated Navigation Method Based on Neural Network
A Resilient Particle Swarm Optimization Algorithm with Dynamically Changing Inertia Weight
Applications of Reservoir Sensitivity Prediction Based on Quantum Neural Networks
Study on Application of Fast Intrinsic Mode Decomposition to Short-Term Load Forecasting
Load Forecasting by Considering Wind Power Based on Sequential Time Classification LSSVM Model
An Intelligent Algorithm Method of Element Layout Priority Sequence on Consoles Human Machine Interface
A Hybrid Intelligence Algorithm for No-Wait Flow Shop Scheduling
A User-Based Modeling and Analysis of Network Public Opinion Using Particle Swarm Optimization
The Description and Characterization of Symmetric Frames and Gabor Frames and Applications in Material Engineering
Semi-Orthogonal Parseval Wavelets Frames on Local Fields and Applications in Manufacturing Science
Weight Determination Method Based on Principal Component Analysis Coking
Large Subassembly Relocation for Finish Machining of Wing-Fuselage Joints in Digital Final Assembly of Aircraft
Box Parts Manufacturability Evaluation Based on Feature Model
Assembly Sequence Planning Based on Connector Structure and Ant Colony Algorithm
The Research of a Two-Directional Vector-Valued Quarternary Wavelet Packets and Applications in Material Engineering
More Efficient Methods among Commonly Used Robust Estimation Methods for Robust Unitary Linear Regression
More Efficient Methods among Commonly Used Robust Estimation Methods for Similarity Transformation
Chapter 23: Data Mining, Information Technologies and Computer Applications in Industry
Research on Technology of Broadband Optical Fiber Access Network System
A Fast Connection Construction and Update Algorithm
A Study on CIF-to-BMP Format Transformation Algorithm
Physical Layer Security Solutions for High Speed Data Networks
An Empirical Study on Small Enterprises E-Commerce Adoption Decision Based on TAM Model & TOE Framework
Research on Jiangxi Tourism E-Commerce Site Planning
A New SVM Multi-Class Classification Algorithm Based on Sample Scale and Distribution Area
Using Adaptive Scheme to Monitoring Dependent Steps with Attributes Data
A GPU/CPU Programming Model for CFD Simulation
JPEG DCT Compressiom
Music Source Separation Based on Improved Sinusoidal Modeling
The Search Technology of Query Expansion Based on the Agriculture Information
A Model of Replication Creation in Distributed Networks
Design and Implementation of Online Answering System
Research on Method of Limit to Model Behavior Region in Virtual Environment
Genetic Algorithm for Panel Cutting Stock on CUDA Platform
Research on Trees Static and Dynamic Modeling Method
Research on Simulation of Syncretizing Remote Sensing Information Vegetation Scene
Integral Modeling for Entity of Trees Based on 2.5D
Design and Implementation of a On-Orbit Service Oriented Dynamic Simulation Platform
Research on Modeling and Simulation of Networked Air & Missile Defense
Study on the Economical Distribution of Load Based on the Lagrangian Multipliers
Chemical Reaction Optimization for Task Mapping in Heterogeneous Embedded Multiprocessor Systems
Power System Data Quality Evaluation Based on the Analytic Hierarchy Process
A Digital Filtering Approach in Measurement and Control System
Research of the Finding Technology of Invocation Model and Data Model of Testing Systems Based on TTCN-3
Study of Connecting Rod Cracking Production Line Layout Planning System Based on VB6.0
Furnace Data Management System Based on WinCC User Archive
Small Fluctuations Research of Internet AS-Level Topology Based on PFP Model
Research on the Cloud Manufacturing Service Discovery for Industry Manufacturing System Based on Ontology
Supervisory Information System Application in Power Plant
On an Improved SPRINT Data Stream Online Classification Algorithm
Availability Allocation for Distributed Clusters of the Cloud Infrastructure
Personalization Information Retrieval Based on Topic Directory
Complementary QoS Strategy Research and Application in Large-Scale Switched Networks
Based on TSIP Protocol GPS Data Decoding Algorithm
User Classification Prediction Research Based on Clustering SVM
The Most Preferred Route of the Car Navigation System: A Systems Engineering Approach
Analysis and Design of Intelligent Assessment System for Supplier Service Quality
Application of Change Control Technology in Weapon Equipment Software Configuration Management
The Interface Design of the Voice System Based on the TLV320AIC23 and CPLD
Design of Data Acquisition System Based on PXI Bus and VC++2008
An Information Retrieval System Based on Portable Device
Haptic Data Compression Based on Linear Prediction
FRFT Based Method to Estimate DOA for Wideband Signal
Reliability Analysis and Design of Facility Systems Based on Edge Failures: A Review
EEG-Based Music Mood Analysis and Applications
Chapter 24: Control and Automation in Manufacturing
Design of Nut Machine Vision Inspection and Screening Systems Based on PC
Design of Optimum Controller of APT Fine Tracking Control System
Design of Cemented Carbide Face Automation Grinder Based on Constant Force Grinding and Online Measurement Technology
The Design for High-Power Maglev Blower Controller
The Application of Bluetooth in the Control System of the Smart Home with Internet of Things
The Implementation of Permanent Magnet Synchronous Motor Direct Torque Control
Research on Model Reference Robust Control for Multivariable Linear System
Robust Adaptive NN Design for Course-Tracking Control of Ship with Input Saturation
Monitoring and Management of Control System for Concrete Mixing Station
Design of Control System for Concrete Mixing Station
Back-Stepping Adaptive Attitude Control of Over-Actuated Spacecraft
Study of Variable Structure Control Based on SVM
Adaptive Feedback Control for a Class of Discrete Chaotic Systems
Spray Experiment Control System Design of Exhaust Gas Desulfurization Based on PLC
Design of Real Time Monitoring System in Urban Pipeline Networks Based on Wireless Communication
DR Model Based Network Control System Design and Analysis with Time Delay and Data Packet Dropout
Research and Application of Intelligent Control in Ceramic Kiln Temperature
Temperature Control in Brazing Furnace Based on B-Spline Fuzzy Neural Network
The Design of Remote Real-Time Intelligent Monitoring System Based on ARM and DSP for Precision Grinding Machine
Simulation and Analysis of the Anti-Sway Control of Crane Ship Based on Adams and Matlab Co-Simulation
Research of Approach for Fuel Transfer Integrative Control of Offshore Oil Platform Power System
Design of Simulating Control System on Marine Oily Water Separator
Application of PLC in the Control System of Fins-Former
Chapter 25: Industrial Design and Product Design: Theory and Practice
Exploration of Offbeat Funny Design on Daily Ceramic Products
Material Analysis on Oil well Wellhead Assembly and Application in Thermal Production well
Maturity Management Strategy for Product Collaborative Design
The Application of Form Symbols in Furniture Design
Psychoacoustic Properties Analysis on Interior Noise of High-Speed Trains
Case Study on Improving Energy Efficiency of Garment Materials by Women's Wear Style Transformation Design
Study on Simulation and Design of Fitness Entertainment Machine Based on the Fischertechnik Model and UG, ANSYS
Incorporating Ergonomics Evaluation in Assembly and Disassembly of Repetitive Task: Focusing on Load Task
Study on Industrial Design Method for Product Life Cycle
Process Control Method of Complex Product Multidisciplinary Collaborative Design System
Disassembly Evaluation Based on Principal Component Analysis
The Study of Material Texture Image Model by Kansei Engineering
A New Design of a Hydraulic Steel Radial Gate with Two Oblique Arms by Topology Optimization
Design of Fixture Systems in Automotive Manufacturing and Assembly
The Research of Product Concept Feature Modeling Based on Energy Saving
Emotional Design of Modern Products Reflect
Emotional Design Study on Soy-Milk Grinder
Slip Resistance of Floors in a Supermarket
An Evolutionary Game Study on the Sustainable Product Development in Remanufacturing
Development of a Virtual Prototype of Surmounting Transport Vehicles Based on Solidworks
The Transform of the Elements of Inspiration in Machinery Innovation Design
The Color Research of Pharmacy Machine Based on Kansei Engineering
User Knowledge Acquisition Research for Automotive Design
Research on Automotive Design Chain Innovation
Optimization Design of Automatic Transplanting Machine Based on TRIZ
Modularization Analysis Approach of Product Family for DFMC Based on Complex Network
Chapter 26: Transportation and Logistics
Prediction of Traffic Volume in Highway Tunnel Group Region Based on Grey Markov Model
The Evaluation and Analysis on Port Service Development — As Ningbo and Shanghai Port for Example
The Design of Cigarette WMS Based on RFID
Development of RFID Cigarette Pallet Warehouse System
China's Railway Transportation Network Christopher Research
A Modular Framework for a Bus Monitoring & Passenger Notification System
Research on the Capability Evaluation of the Emergency Logistics Center Based on Linguistic Variables
Chapter 27: Green Supply Chain, Energy Saving and Low Carbon
Research on Sustainable Energy Development Strategy and Low Carbon Relationship
The Application of Information Technology in Green Supply Chain
Green Supply Chain Network Equilibrium Model with Genetic Algorithm
Financial Subsidies and their Effects on Environment-Friendly Products Supply in Green Supply Chain
Diagnosis Method and Empirical Study of Supply Chain Performance Based on Bayesian Network
The Carbon Sink Estimation and Carbon Sink Increase Potential of Jiangmen, China
Multi-Agent Applied Research in Agile Supply Chain
Value Analysis on Inventory Information Sharing in Supply Chain
Study on the Allocation of Carbon Emissions Based on the Supply Chain Profit Distribution
Analysis of the Main Technical Ways of Automobile Energy Saving
Chapter 28: Organization of Production and Engineering Management
Manufacturing Resources Optimization Operation for Iron and Steel Enterprise Based on Green Manufacturing
Service-Oriented Manufacturing Agility and Application Based Flexibility
Workforce Flexibility Optimization in Chemical Plant Construction Process
Secret of Chinese Manufacturing Innovation: An Analysis of SME Sustaining Competitive Advantage
Research on Emergency Disposal Platform Based on Multi-Agent with a Cooperative Model
The Construction, Existing Problems and Countermeasures of Germanium Ecological Chain in Yunnan
The Layout Optimization of the Multi-Sized Operating Units in the Facility Based on Space Utilization
Establishment about Short-Term Demand Predictive Model of Automobile — Based on Extensive Correlation Evaluation and Continuous Time Model
Training Mode Design of ESP Teachers in Universities of Science and Engineering
Research on the Equipment Manufacturing Industry's Interregional Industrial Linkages in the Bohai Sea Region
Dynamic Efficiency Analysis of Coastal Container Terminal Enterprises in China
Empirical Research on the Science and Technology Project Ex-Post Evaluation Index System
A Study on Patent Storage Problems of Cooperation between Small and Micro Businesses and Universities in the Triple Helix of University-Industry-Government Relations — Based on Economic Order Quantity Model
A Methodology Based on Resource Elements for Equipment Capability Analysis Oriented Virtual Cellular Manufacturing Systems
Uncertainty Spread and Control of Complex Supply Chain Networks in Manufacturing Industry
The Risk Management Method for Project Schedule of Aerospace Engineering
Study on Examination Reform of Specialized English for Seafarers on International Ships
Influence of Intellectual Capital on Technical Innovation Performance of Clustered Manufacturing Enterprises
Simulations on the Spare Parts Inventory Management of Equipment Maintenance in Manufacturing Enterprise Based on Flexsim
Developing Automated Production Management System for Manufacturing Green IT Products
A Framework for Implementing Social Manufacturing System Based on Customized Community Space Configuration and Organization
On Characteristics and Development Trend of Advanced Manufacturing Technology
Research on the Destructive Leadership in Virtual Enterprises
Application of PDCA-Cycle on the Management of Critical Values Reporting
An Application of GMM Method in the Test of Relationship between Urbanization and Circulation Economic Growth
Application of Elman Neural Network with HP Filter in the Trend Supply of Self-Provided Power Plant Forecasting in the Iron and Steel Industry
