Metastable, Mechanically Alloyed and Nanocrystalline Materials 2001

Erscheinungsjahr 2002
ISBN: 978-3-03859-884-8
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volumes 386-388, 676 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Materials Science Forum

Metastable and Nanocrystalline Materials are currently among the hottest research topics in materials science.
Volume is indexed by Thomson Reuters CPCI-S (WoS).

Autoren/Hrsg.

Ma, E.

Atzmon, M.

Koch, C.C.

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Ductilisation of Fe-Based Metallic GlassesNanostructure Synthesis and Amorphization during Cold RollingSignificance of the Heat of Mixing for the Amorphization of Multilayers by Deformation ProcessingNovel Multicomponent Amorphous AlloysConsolidation of Partially Amorphous Al-Fe-Zr AlloysGlass-Forming Ability of Mg-Cu-Co-Y AlloyFormation of Glassy Ti50Cu20Ni24Si4B2 Alloy by High-Energy Ball MillingGlass Formation of Containerless Levitated Zr55Al10Ni5Cu30 Alloy Containing OxygenPhase Evolution and Microstructural Characterisation of High-Energy Ball Milled Al-Si-Fe-Ni AlloysSingle Activation Enthalpy of Diffusion in a ZrTiCuNiBe Bulk Glass Around the Glass Transition After Structural RelaxationViscosity of Mechanically Alloyed Amorphous Zr-Cu-Al-Ni Matrix Composites in the Supercooled Liquid RegionTransformations in Primary Crystallites in (Fe,Ni)-Based Metallic GlassesQuasicrystal Formation, Phase Selection and Crystallization Kinetics in Zr-Cu-Ni-Al Based Metallic GlassesFormation of Quasicrystals and Crystallization Sequence in the Zr46.8Ti8.2Cu7.5Ni10Be27.5 Bulk GlassGeneration and Annihilation of Nanocrystalline Nucleus in Undercooled Pd-Cu-Ni-P ParticleExtremely Low Critical Cooling Rate for Pd43Ni10Cu27P20Comparative Analysis of Crystallization of Al85RE8Ni5Co2 (RE = Rare-Earth Metals) Metallic Glasses with and without Supercooled Liquid RegionElectrical Discharge Assisted Ball Milling: a Promising Materials Synthesis and Processing MethodAtmospheric and Milling-Device Effects on the Activation Energy for Crystallization of a Partially Amorphized Ni-Mo AlloyModeling of Fast Microcontact Interactions of Solids during Milling, Mechanical Alloying and Mechanical Activation by Dynamic Nanoindentation TechniqueEffect of Sintering Conditions on The Martensitic Transformation in a MA and SPS Sintered Cu-50 at.% Co AlloyConsolidation of Mechanically Alloyed Fe-27at%Al at High PressureThe Influence of Milling Intensity on Mechanical AlloyingStructural and Chemical Characterization of Cu-Ag and Ni-Ag Nanocomposites Synthesized by High-Energy Ball MillingMechanically Alloyed (Fe0.5Cu0.5)100-xZrx AlloysEvolution of Structure in the Disordered Nanocrystalline Fe75Si25 Alloy under Heat TreatmentAmorphization and Reactivity of Silicon Induced by Mechanical TreatmentFormation and Stability of Metastable Pd(Zr) Solid Solution Developed during Ball Milling and/or Heat Treatment of Pd3ZrCharacterization of Alloyed Cementite Produced by Mechanical Alloying and Spark Plasma SinteringStructural Investigations of CuZr Prepared by Mechanical AlloyingA Neutron Small-Angle Scattering Study of the HfPd SystemSynthesis and Characterization of Nickel, Cobalt and Iron Raney Catalysts Prepared by Mechanical Alloying and Alkaline LeachingNiAl-Al2O3 Nanocomposite Powders Formed by Reactive MillingDiamond Synthesis by Mechanically Induced DetonationChemomechanical Effects Accompanying Mechanochemical Reactions and CreepPreparation of Disperse Ceramic Materials by Soft Mechanochemical SynthesisA New Mechanochemical Method for Metal CoatingMechanochemical Reduction of Copper SulfideMechanochemical Treatment of Scrap Tire RubberGrowth of Fe Oxide Whisker from Fe-Cu and Fe-Ag Supersaturated Solid Solution NanoparticlesNeutron Diffraction Study of Nanocrystalline Oxycarbide Glasses Prepared by Sol-GelProduction of Nanostructured CoO, Co3O4 and NiO Particles by Mechanically Induced ReactionsReaction Kinetics and Microstructural Evolution during the Heating of High Energy Ball Milled Al-TiO2 and Al-V2O5 Composite PowdersSolid State Reactions between V2O5 and C during Mechanochemical Processing and Heating of V2O5/C Composite PowdersSpark Plasma Sintering of Alumina?Cr and ?Nb CompositesNanostructured Metastable ?-Titanium Based AlloySynthesis and Properties of Al-Based Amorphous and Nanocrystalline Thin FilmsFormation of Nanocrystalline Ferrite in Fe-0.89C Spheroidite by Ball MillingProcessing and Properties of Dense Cu NanocompositesPrecursor-Derived SiC/Si3N4 Nano/Nano Composites: Synthesis, Structure and Phase Evolution at High TemperaturesSingle-Step Preparation of NanocompositesGas-Phase Combustion Synthesis of Tin Oxide NanoparticlesPreparation and Characterization of Cr-O Films Grown by Low-Temperature Chemical Vapor DepositionStructure/Property Relationship in Silicon Oxycarbide Glasses and Ceramics Obtained via the Sol-Gel MethodStructural Investigation of Silicon Carbonitride Glasses by Neutron DiffractionSolid Solution Behavior of CexZr1-xO2 Nanopowders Prepared by Flame Spray Pyrolysis of Solvent-Borne PrecursorsRecent Developments in Mechanochemical Nanoparticle SynthesisThermal Stability of Nanostructured ElectrodepositsMicrostructure and Thermal Stability of Electrodeposited Nanocrystalline NickelMicrostructural Investigation of Grain Stability in Cryomilled Inconel 625Thermally Stable Nanocrystalline Al-Mg Alloy Powders Produced by CryomillingTensile Properties of Bulk Nanocrystalline Hexagonal Cobalt ElectrodepositsModelling of Equal Channel Angular Pressing for Ultrafine-Grained MetalsStudy of Embedded Lead-Tin Nanoparticles in Aluminum MatrixSpin Dynamics of Nanostructured La2/3Ca1/3MnO3Bulk Fe-Based Metallic Glass with Extremely Soft Ferromagnetic PropertiesDisordered Magnetism at the Grain Boundary of Pure Nanocrystalline IronMagnetism and Structure of Nanoparticles and Mesoscopic SystemsStructural and Magnetic Characterization of High-Coercive Ball-Milled Hard Magnetic (SmCo5) + Antiferromagnetic (NiO) Composites57Fe M?ssbauer Spectroscopy Study of FeSi2 Powders Prepared by Water AtomizationStructural Change and 57Fe M?ssbauer Spectroscopy Study of Mechanically Alloyed Fe2C PowderProperties of Fe and Co Nanoparticles Synthesized by Chemical Vapor CondensationMagnetic and Transport Properties of Mechanosynthesized FeCr2S4 SulfospinelInfluence of the B Content on the Structural and Magnetic Properties of Fe60Mn10Al30-xBx Prepared by Mechanical AlloyingStructure of Fe-Ag Super-Laminates Fabricated by Repeated Rolling and Mechanically Alloyed Fe-Ag PowderHigh Strength Nanocrystalline Mg-Based AlloysSome Unresolved Issues Concerning Mechanical Behavior of Nanocrystalline MetalsHigh Energy Milling of Si-Doped Titanium Aluminides? General Problems and Potential ApplicationsRapidly Solidified Powder Metallurgy Magnesium Alloys with Novel Mechanical PropertiesUse of a Cobalt-Based Metallic Glass for Joining MoSi2 to Stainless SteelSuperplastic Forging of ZrTiCuNiBe-Bulk Glass for Shaping of MicropartsMicrostructural and Deformation Characteristics of a Laminated Amorphous/Nanocrystalline Alloy, Zr67Nb6Cu14Ni10Al3Development of Welding Technologies in Bulk Metallic GlassesOn the Atomic Force Microscopy Characterization of Some Zr-Based Metallic Glasses: Anomalous Electrostatic BehaviorNanocrystalline Al-Based Alloys for Elevated Temperature ApplicationsDetermination of the Mechanical Properties of Nanocrystalline Fe-Cr-Based Thermal Spray CoatingsMicrostructural Evolution and Mechanical Flow of 6061 Al during Equal Channel Angular PressingAnomalous Elastic Properties of Metal-Metal InterfacesMechanical Activation of Granite Rock Dust: Strength Development in Portland Cement Concrete and Lime MortarsBulk Shape Memory NiTi with Refined Grain Size Synthesized by Mechanical AlloyingMechanosynthesis of Hydrogen Storage AlloysElectrochemical Properties of Nanocrystalline Sn-Based Alloys for Lithium BatteriesSynthesis of B2-Structured Mg Alloys by Mechanical Alloying, and their Hydriding PropertiesMicrostructural Characterisation of a Rapidly Solidified Mm(NiCoMnAl)5 Hydride-Forming AlloyOxidation of Glassy and Nanocrystalline Zr70Pd30 AlloysH2S-Sensing Properties of Nanocrystalline SnO2 Powder Produced by Mechanochemical MillingUnusual Metastable Ion-Conducting States in Ionic Salt- Oxide NanocompositesSynthesis of Biomaterials by Mechanochemical Transformation