Buch, Englisch, 530 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
Buch, Englisch, 530 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g
ISBN: 978-3-03785-398-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committee
Chapter 1: Polymer Composites and Applied Materials
A Magnetic Array Fabricated by a Novel Process Constructed with Photosensitive Polyimide-Ferrite Nanocomposite
Effect of Liquid Structural Transition on the Morphology of Solid/Liquid Interface during the Unsteady-State Unidirectional Solidification
Effect of Particle Size of Natural Graphite on Methyl Blue Sorption Behavior of Expanded Graphite
Expansion Mechanism of Expandable Graphite Formed by Natural Graphite with Different Particle Size
Finite Element Implementations to Predict the Failure of Composite Laminates Under Uniaxial Tension
Improved Physical and Electrochemical Hydrogen Storage Kinetics of the Mg20Ni10-XMx (M=Cu, Co; X=0, 4) Alloys by Melt Spinning
Influence of Bi2O3 on the Structure and Magnetic Properties of Barium Ferrite Powders Materials
Investigation about Synthesis of Carbon Nanotubes with Various Structures Governed by Temperature and Relevant Growth Mechanism
Investigation of Structure and Properties of PET Multifilament Irradiated with UV in Different Atmosphere
Microstructure and Mechanical Properties of Mg-6Al-0.3Mn-0.9Y Alloy
Microstructure and Wear Resisting Property of 40Cr Steel Treated by Supersonic Particles Bombarding
Perfluoropolyether Modified Waterborne Shape Memory Polyurethaneurea Ionomers for Potential Medical Implant Application
Photodecomposition of Methylene Blue by the S, Al Doped TiO2 Mesoporous Materials
Preparation Mechanism of Electrostatic Self-Assembled Polyelectrolyte Film Using Quartz Crystal Microbalance
Self-Piercing Riveting Process Simulation of Joining Aluminium Alloy Sheets
Size Effect of Expandable Graphite
Size-Dependent Young's Modulus of the FCC Metallic Films
Structure and Properties of Composite Films of Cellulose and Chitosan from Ionic Liquid
Study of the Preparation and Degradable Characteristics of CaCO3-PE Film
Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment
Synthesis and Characterization of Novel PCA-PEG-PCA Triblock Copolymer
Synthesis and Characterization of Polyesters Containing 5-Fluorouracil in the Main Chain
Synthesis of Poly(Urethane-Urea)s from Polycarbonate Macrodiols and IPDI with the Addition of Derivant of Propylene Carbonate
The Effect of Fatty Acid on Phase Behaviors of Tween 80/bmimPF6/toluene Microemulsions
The Electrochemical Performance of Carboxymethyl Cellulose with Different DS as a Binding Material in Lithium Batteries
Chapter 2: Applied Mechanics and Manufacturing Technology
Design of Rupture Strength Based on Confidence Level of HK40 Steel
An Approach for Analysis of Bulged Profile and Thickness Distribution of Tube in Free Hydro-Bulging Process
Numerical Investigation of Air Flow Distribution in a Swirling Fluidized Bed
Approach of Selecting Profile Modifications Curves for Spur Gears
Preparation and Properties of a Custom-Designed Nickel-Based Amorphous Brazing Foil
Investigation on the Process Characteristics of Laser Cladding Fabrication Using 45 Carbon Steel Wire
Pilot Study of Three-Stage Catalytic Ozonation - Biological Activated Carbon for Drinking Water Advanced Treatment
Finite Element Analysis for Homogeneous Earth Dam of Heisonglin Reservoir
The Abstract Device Models and the General Mathematical Models for Energy and Exergy Analyse in Papermaking Mill
Effects of Ball Milling Time on the Microwave Properties of Mg4Nb2O9 Ceramics by the Solid-State Process
Pilot Study of Coagulation-Direct Filtration for Low-Temperature and Low-Turbidity Source Water
Study on the Phase Formation of Corundum-Type Mg4Nb2O9 Powders by the Solid-State Process
Effects of Sintering Temperatures on Microwave Properties of Mg4Nb2O9 Ceramics by the Solid-State Process
The Optimization Design of Certain FRP Sluice Gate
Effects of Holding Time on Microwave Properties of Mg4Nb2O9 Ceramics by the Solid-State Process
Advances in Process Technology of Sepiolite Mineral Fibrous Materials
Quantitative Analysis of Residence Time Distribution in Kenics Static Mixer
Motion Trajectory Analysis of Potting Knife in Pot-Making Mechanism Based on Pro/E
The Finite Element Simulation of Milling Based on Orthogonal Cutting Model
Theory Analysis of FBG Characteristics under 3D Homogeneous Stress Field
Comparative Study of RANS and LES Simulation Methods for Analysis of Turbulence in a Tubular Stirred Reactor
Fabrication of C/Cu Composites by Mechanical Activation and Spark Plasma Sintering
Research on Oil Change Period of LNG and Diesel Engine Bus
Main Parameters Calculation and Performance Test of 7YGS-45 Type Self-Propelled Dual-Track Orchard Transport
Dynamics Analysis of Refrigeration Compressor Based on Finite Element and Experimental Modes
A Numerical Analysis for Cracks Emanating from a Quarter-Spherical Cavity on the Edge of an Elastic Body
Design of Double-Light Shadowless Lifting Retractor
Investigation on Moiré in Multicolor Overprinting
Theoretical Research of Residual Stress on H-Beam Roller Straightening
Impact of Step Height on Deformation of Foundation for Wind Power Generator System
Application Research on Fault Diagnosis Based on Improved Wavelet Neural Network
Adaptive Synchronization for a Class of Switched Chaotic Systems with Uncertainty
High Temperature Tribological Behavior of Ball Milled Expanded Graphite/Iron Powders
Earthquake Response of Asymmetric Structure Considering Soil-Structure Interaction in Time Domain
Simulation of Cavitation Erosion in Different Throttling Pipelines
Research on Reproduction Characteristics of Digital Laser Plate
Numerical Simulation of Steel Plate Processed by Shot-Peening
General Rotation Union Design Experiment for Seed Dispensing Performance of Seed Metering Disc
Rheological Behavior of Diamond Particle/Epoxy Resin Adhesive Adapted to Screen Printing
Research of the Factor that Influence the Ink Printing Density of Water-Based Gravure Ink
Study on the Deformation and Fracture of Bolted Roadway with Infrared Characteristics
Three-Dimensional Finite Element Simulation Analysis of Jinliang Rive Inverted Siphon Structure
Finite Element Method Mechanical Characteristics Analysis of Tower Foundation for Wind Turbine Generator System
Application of Finite Element Method in Structure Analysis for Inclined Clay-Core Wall Earth Dam
Dynamic Inverse Model for Multi-Sensor Measurement System Based on Wavelet Neural Network
A New Numerical Analysis for Inclined Crack in an Infinite Plate
Analysis and Evaluation on Detectability of Characteristic Index for Coal Property
Influence of Processing Methods on Number and Form of Cracks of Bionic Units on Vermicular Cast Iron
Research on Distribution for Soot Remain Different Height in Smoldering Fire
Adaptive Switching Control for Projected Synchronization of Chaotic Systems with Uncertainties
Application of Machine Vision Technology in the Detection of Industrial Products
Test Methods for Suspended Load Abrasion and Bed Load Abrasion on Hydraulic Concrete
Experimental Investigation on Water Miscible Rolling Lubricant J4
An Optimal Study of the Preparation Conditions of Urea-Modified Titanium Ore Adsorbent
Wear Resistance Experimental Analysis of Closed Extruding Fine Blanking Parts Surface
Force Performance Research for the Interior Joint of New Light-Weight Portal Rigid Frame
Chapter 3: Other Related Topics
Numerical Simulation of Three-Component Induction Resistivity Log
Low Voltage Ride through (LVRT) Control of Double-Fed Wind-Driven Generator
Use KMnO4 to Control Bromate Formation during Drinking Water Ozonation: Influencing Factors
An Effective Thermal Flow Meter Based on TDC-GP1 Chip
Near-Infrared Spectroscopic Measurement of Organic Matter in Soil
Study on the Removal of Copper Ions from Water Using Eco-Friendly Attapulgite/Chitosan Composites
The Linear Auto Disturbances Rejection Controller Application in Beam Magnetic Suspension System of Gantry Moving Type Numerical Control Machine Tool
Robust H8 Control with Actuator Faults
Electrochemical Sensors for L-Tryptophan Based on Molecularly Imprinted Polymers
The Synchronization Control of Gantry Machining Center Magnetic Suspension System Base on ModelReference Fuzzy Adaptive
Design of Temperature Measured Terminal with GPRS in the Central Heating Room and Research of the Charging Method by Indoor Temperature Measured
Development of Data Recording and Analysis System for Urban Rail Vehicle
Estrogenicity of Six Typical Aqueous Pollutants
Study of Remote Elevator Monitoring Fault Detection System
Research of the Distance Calculation Algorithm Based on RSSI
Fuzzy Control Tuning Method of Digital PID Parameters
Research on Aluminum Electrolysis Equipment Control Strategy
Study on Integral Summation Algorithm for Measurement of Superfine Scale Based on Fraunhofer Diffraction
Gear Transmission Fault Tree Analysis Based on Bayesian Network
Calculation of Magnetic Susceptibility and Conversion of Units
Theory Analysis of Three-Component Induction Resistivity Log
