Selected, peer reviewed papers from the 14th International Conference on Aluminium Alloys (ICAA14), June 15-19, 2014, Trondheim, Norway
Buch, Englisch, 1300 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1900 g
ISBN: 978-3-03835-120-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Advanced Analysis
Subgrain Structures Characterized by Electron Backscatter Diffraction (EBSD)
Visualization of Micro-Segregations in A356 Aluminum Alloy by a Color Etching Method
Validation of Simulated Material Flow in Aluminium Hot Extrusion with a Novel Visualisation Method
Detection of Phase Transition in Free-Cutting Al-Mg-Si Alloys by Resonant Ultrasound Spectroscopy
Variation Analysis of Grain Deformation in Aluminum Alloy
A Positron Study of Early Clustering in Al-Mg-Si Alloys
Orientation Studies of a-Al(Fe,Mn)Si Dispersoids in 3xxx Al Alloys
Methodology for Quantification of the Roping Phenomena in 6xxx Automotive Car Body Sheet Alloys
Metallographic Methods for Oxide Skin Segregation Studies
Assessment of Deformation Behavior of Polycrystalline Aluminum Using Diffraction-Amalgamated Grain-Boundary Tracking (DAGT) Technique
Atomic-Resolution Elemental Mapping of Precipitates in a 7449 Aluminium Alloy
Chapter 2: Casting and Solidification
Reference Dies for the Evaluation of Tensile Properties of Gravity Cast Al-Si Alloys: An Overview
Effect of Casting Temperature on Grain Size of Al-Si Alloys Refined by a Novel Grain Refiner
Segregation during Metal Sampling
Influence of Ultrasonic Treatment on the Microstructure of Hypereutectic Al-17 Wt%Si Alloys
Tensile Properties and Hot-Tearing Tendencies of 3xxx Alloys
Ultrasonic Melt Processing: Opportunities and Misconceptions
Effect of Potential on Hydrogen Evolution during Pitting of Aluminum
Study on Absorption Rate of Phosphorus for Hypereutectic Al-Si Alloy Modified with Cu-P
Full through Process Simulation for Low Pressure Die Casting – From Casting to Design
A Novel Ultrasonic Casting Process Using Controlled Cavitation and Melt Flow in Hot Top Molds
Modification of Eutectic Si in Al-Si Based Alloys
The Heat Treatment of Rheo-High Pressure Die Cast 6xxx Series Al-Mg-Si-(Cu) Alloys
Beware of Grain Refinement
Melt Conditioned Direct Chill Casting (MC-DC) Process for Production of High Quality Aluminium Alloy Billets
Grain Refinement Efficiency of a New Oxide-Containing Master Alloy for Aluminium Casting Alloys
The Grain Refinement of Al-Si Alloys and the Cause of Si Poisoning: Insights Revealed by the Interdependence Model
A New Approach of Casting Aluminium Alloy Bar by Applying Low Frequency Electromagnetic Field
Effect of Cu on the Microstructure and Mechanical Properties of Diecast Al-Mg2Si-Mg Based Alloy
Chapter 3: Corrosion, Coatings and Surface Properties
Influence of Microstructural Constituents and Applied Thermomechanical Processes on Corrosion Behaviour of Aluminum Alloys Produced with Twin Roll Casting (TRC) Technique
Combined Surface Treatment of Electron Beam Alloying and PVD Hard Coating for Al Alloys
Influence of Li Additions on the Microstructure and Corrosion Response of 2XXX Series Aluminium Alloys
The Effect of Heat Treatment on the Long-Term Corrosion Resistance in Er Containing 5083 Cold Rolled Sheets
Effect of the Microstructure and Environmental Exposure Conditions on the Corrosion Behaviour of the 2050 Alloy
Mechanical Property and Intergranular Corrosion Sensitivity of Al-2.7Cu-1.7Li-0.3Mg Alloy with Small Zn Addition
The Impact of Machining on the Corrosion Behaviour of AA7150-T651 Aluminium Alloy
Improved Accelerated Testing for Localized Corrosion Susceptibility of High-Strength Aluminum Alloys
Simulation of Electrodeposition of Al from Ionic Liquid
Comparative Study of Microstructural and Corrosion Characteristics of Excimer Laser-Melted AA2124-T4 and AA6061-T4 Alloys
Effect of Scandium Addition on Mechanical Properties and Corrosion Resistance of Medium Strength Al-Zn-Mg-Cu) Alloy
Effect of Alloying Elements on the Colour Development of Anodised Al-Mg-Si Alloys
Effect of Stabilizing Treatment on the Intergranular Corrosion Behavior of High Strength Al-Mg Alloys
Chapter 4: Fatigue, Fracture and Creep
Aging Process during Creep Deformation in an Al-Mg-Si Alloy Affected by Pre-Aging Condition
Effect of Heat Treatment and Alloying Element on Impact Energy Absorption of AlSi10 Casting Alloys
Prediction of Fatigue Life for Light Metals and their Welded Metals
Effect of Cold Plastic Deformation Prior to Ageing on Creep Resistance of an Al-Cu-Mg-Ag Alloy
Influence of Processing Route on the Work-Hardening and Ductile Fracture of an AA6060 Aluminium Alloy
Effect of Electroless Ni-P Plating on the Fatigue Strength of Dilute Al-Si Alloys
Influence of Particles on Short Fatigue Crack Initiation in 2050-T8 and 7050-T74
Grain-Size Dependency of Low-Temperature Creep in Ultrafine-Grained Aluminum
Extrapolation of Creep Curve and Creep Rate by Strain Acceleration Parameter in Al-Mg Solid Solution Alloys
Analysis of Small Fatigue Crack in Al-Mg-Si Aluminum Alloy
Modeling of the Influence of Pore Morphology on Damage Behavior of an Aluminum Die Casting Alloy
Effect of Micro-Voids on Crack Initiation and Propagation in Bending Deformation of Al-Mg-Si Alloy Sheet
Effect of Rolling on Mechanical Properties and Fatigue Behavior of an Al-Mg-Sc-Zr Alloy
Chapter 5: Joining
Application of the Hybrid Metal Extrusion & Bonding (HYB) Method for Joining of AA6082-T6 Base Material
Solid State Joining of Aluminium to Titanium by High Power Ultrasonics
Effect of Coating Layer on Advanced Stud Welding of 2024 Aluminum Alloy to Galvanized and Galvannealed Steel Sheet
Dissimilar-Metal Joining Using Several Types of High-Speed Solid-State Welding Methods
Friction Stir Welding of an Al-Mg-Sc-Zr Alloy with Ultra-Fined Grained Structure
Characteristics of Fatigue Cracks Propagating in Different Directions of FSW Joints Made of 5754-H22 and 6082-T6 Alloys
Effect of Temperature Field and Pressure Force on the Inhomogeneity of 5754-H22 and 6082-T6 FSW Joints
SPH Analysis on Formation Manner of Wavy Joint Interface in Impact Welded Al/Cu Dissimilar Metal Plates
Interfacial Reaction during Dissimilar Friction Stir Lap Welding of Aluminum Alloy to Stainless Steel
Direct Joining of Aluminum Alloy and Plastic Sheets by Friction Lap Processing
Effect of Intermetallic Compounds Content on Laser Welding Performance of Al-Fe Alloy Sheets
Systematic Evaluation of the Advantages of Static Shoulder FSW for Joining Aluminium
Behaviour of Flow-Drilling Screw Connections
Controlling Interfacial Reaction during Dissimilar Metal Welding of Aluminium Alloys
Chapter 6: Mechanical Properties
Effect of Heat Treatment Conditions on the Elongation of AA1200 Alloy Sheets
Three Point Bend Performance of Solutionized, Die Quenched and Heat Treated AA7075 Beam Members
Characterization of AMAG AL6-CHA Sheet Material for Chassis Application in the Automotive Industry
High Temperature Tensile Behaviour of the A354 Aluminum Alloy
The Effect of Obstacle Strength Distribution on the Critical Resolved Shear Stress of Engineering Alloys
Activation Distance Determination of Rate Controlling Obstacles in the Age Hardening of a Quasi-Binary Al-Mg2Si Alloy
Mechanical Property of Roll Cast Al-11%Si Alloy
Mechanical Properties and Constitutive Behavior of as-Cast High Strength AA7xxx Alloys below Solidus Temperature
Solution Strengthening of Various Elements in Aluminium Alloys
Effect of the Zn/Mg Ratio on Microstructure and Mechanical Properties in Al-Zn-Mg Alloys
Effects of Zn Addition and Aging Condition on Serrated Flow in Al-Mg Alloys
Mechanical Performance of a Cast A354 Aluminium Alloy
Cryogenic Temperature and Strain Rate Dependence of Mechanical Properties for Extruded AA6060 Alloys
Mechanical Properties of Sintered of Al-5.5Zn-2.5Mg-0.5Cu PM Alloy
Correlation between Supersaturation of Solid Solution and Mechanical Behaviour of Two Binary Al-Si-Alloys
The Effect of Artificial Aging on the Structure and Properties of the Heat-Resistant Alloy V-1213 of Al-Cu-Mg-Ag System
Influence of Temperature and Strain Rate on the Mechanical Behaviour of Aluminium Alloy AA6060
A Super-Ductile Alloy for the Diecasting of Aluminium Automotive Body Structural Components
Mechanical Behaviour of an AA6082 Aluminium Alloy at Low Temperatures
Tensile Properties of 7075 Aluminum Alloys Subjected to Pre-Fatigue in Humid Environment
Chapter 7: Metal Plasticity and Forming
Fundamentals of Bending AA6xxx Sheet
Crystal-Plasticity Simulation of the Evolution of the Matt Surface in Pack Rolling of Aluminium Foil
Modeling of Bending and Bend-Stretching of Laminated Aluminum Sheets
Slip System Interaction Matrix and its Influence on the Macroscopic Response of Al Alloys
Effect of Aging Precipitates on the Bendability of an Al-Mg-Si Alloy
A New Wheel Design for Reducing Weight
Numerical Study on the Influence of Crystallographic Texture and Grain Shape on the Yield Surface of Textured Aluminum Sheet Material
Experimental Detection of the Onset of Local Necking in an Aluminium Sheet
Use of Plane-Strain Tension and Shear Tests to Evaluate Yield Surfaces for AA1050 Aluminium Sheet
Chapter 8: Modelling and Simulation
Application of the Nes Model for Static Recovery of the Dislocation Density in Cold Rolled AA6XXX
A New Diffusivity Database for Multi-Component Al Alloys: Focusing on Ternary Systems and its Effect on Microstructure Evolution during Solidification
Finite Element Modelling of the Temperature Dependent Low Cycle Fatigue Damage Mechanism of an AlSi12 Type Alloy
Simulation-Based Design of 5xxx Series Alloys with Improved Resistivity against Intergranular Corrosion for Automotive Applications
Determination of a Simple Geometry for the Characterisation of the Energy Absorption Behaviour of Cast Aluminium
Thermodynamic Assessment and Determination of Spinodal Lines for Al-Zn Binary System
Interfacial and Strain Energy Analysis from Ab Initio Based Hierarchical Multi-Scale Modelling: The Al-Mg-Si Alloy ß'' Phase
Numerical Damage Modelling of Aluminium Alloys for Wide Range of Stress Triaxiality
Through-Process Modeling of Microstructure Development during Multi-Pass Hot Deformation Including Partial Recrystallization
Prediction of Yield Strength at Room Temperature for Squeeze Cast A226
Material Flow and Grain Deformation during Extrusion
Modelling the Combined Effect of Room Temperature Storage and Cold Deformation on the Age-Hardening Behaviour of Al-Mg-Si Alloys-Part 1
A Novel Methodology for Optimisation of Product Properties and Production Costs in Fabrication of Aluminium Alloys
Through Process Modelling of Extrusion for AA3xxx Alloys
Thermal Stability of Al-Cu-Mg Alloys
The Effect of Hot Deformation on Dispersoid Evolution in a Model 3xxx Alloy
Study of Aging Precipitation of Al-Zn-Mg Alloys with Er Additions by Monte Carlo Simulation
Constitutive Analyses of Tensile Tests on Pre-Rolled AA3003 Sheets
An Advanced Dynamic Repair of Edge Crack Aluminum Plate with a Composite Patch
Modelling the Combined Effect of Room Temperature Storage and Cold Deformation on the Age-Hardening Behaviour of Al-Mg-Si Alloys-Part 2
Modeling of Static and Geometric Dynamic Recrystallization during Hot Extrusion of Al-Mg-Si Alloy
Analysis of the Rate of Recovery and Recrystallization in Pure Aluminum by a New Rate Equation
Phase Field Modeling of Solute Trapping in a Al-Sn Alloy during Rapid Solidification
Grain Refinement Mechanism of Al-5Ti-1B Master Alloy by Ab Initio Calculations
Chapter 9: Novel Processes and Materials
Effect of Reloading on Dynamic Recrystallization in Shock Deformed Aluminum Alloy
Mechanical Milling of Quasicrystalline Al-Cu-Fe Alloys
Aging and Precipitation Behavior in Supersaturated Al-2%Fe Alloy Produced by High-Pressure Torsion
Casting of Clad Strip by a Twin Roll Caster
Point Defect Clusters Induced by High-Speed Deformation and its Effect on Age-Hardening in 6061 Aluminum Alloys
Mechanisms of Dynamic Recrystallization in Aluminum Alloys
Morphological Control of Porous Structure in Al-Ti Intermetallics Foam Manufactured by Reactive Precursor Process
Characterization of High Strength Al-Zn-Mg Alloy Sheet for Hot Stamping
Upgrading Property of A-Fe Alloys through the Microstructure Refinement by Compressive Torsion Processing
Superplasticity of Ultra-Fine Grained 7075 Alloy Processed by High-Pressure Torsion
TEM Observation of HPT-Processed Cu-Added Excess Mg-Type Al-Mg-Si Alloys
Multiscale Deformation and Dynamic Recrystallization in Shock Deformed Aluminum Alloy
Effect of Hot Deformation on Microstructure and Mechanical Properties of Al-B4C Composite Containing Sc
Strength and Electrical Conductivity Relationships in Al-Mg-Si and Al-Sc Alloys
Effect of Heat Treatment on Phase Composition and Microstructure of Al-Cu-Fe Alloys with Quasicrystalline Phases
Heat Treatment of Aluminum-Titanium-Compounds Made by Co-Extrusion and Friction Welding
Effect of Liquid Hot Isostatic Pressing on Structure and Mechanical Properties of an Aluminum Alloy
Mechanical Properties and Aging Behavior of Ultrafine Grained Al-Ag Alloy Fabricated by Accumulative Roll-Bonding
Improvement of Mechanical Properties by Two-Step Aging in Ultrafine Grained Al-Ag-Sc Alloy
Influence of PVD Target Power on the Age Hardening Behaviour of Al-4Zr Micro Sheets
Influence of Mg Content, Grain Size and Strain Rate on Mechanical Properties and DSA Behavior of Al-Mg Alloys Processed by ECAP and Annealing
The Structure Evolution of a 99.995 Percent High Purity Aluminum during Multi-Forging Process in Room Temperature
Structure Development and Deformation Behaviour of Pure Aluminium Processed by Constrained Groove Pressing
Effect of Cold Plastic Deformation on Mechanical Properties of Aluminum Alloy 2519 After Ageing
Chapter 10: Phase Transformations
Effects of Isothermal Aging on Clustering and Paint-Bake Hardening Behavior in an Al-Mg-Si Alloy
Influence of Pre-Straining and Pre-Ageing on the Age-Hardening Response of Al-Mg-Si Alloys
Use of Multicomponent Phase Diagrams for Designing High Strength Casting Aluminum Alloys
Quantitative Phase Analysis of Al-Mg-Li and Al-Cu-Li Alloys
Monitoring Precipitation Kinetics in Heat Treatable Aluminium Alloys Using In Situ Resistivity in Gleeble Thermomechanical Simulator
Complementarity of Atom Probe, Small Angle Scattering and Differential Scanning Calorimetry for the Study of Precipitation in Aluminium Alloys
Early-Stage Precipitation Phenomena and Composition-Dependent Hardening in Al-Mg-Si-(Cu) Alloys
In Situ Isothermal Calorimetric Measurement of Precipitation Behaviour in Al-Mg-Si Alloys
The Influence of Mg and Ag on the Precipitation Kinetics and the Formation of the T1 Phase in Al-Cu-Li Alloys
Investigation of Grain Boundaries in an Al-Mg-Si-Cu Alloy
Formation Behavior of Nanoclusters in Al-Mg-Si Alloys with Different Mg and Si Composition
The Life-Time of Structural Vacancies in the Presence of Solute Trapping
Ageing Characteristics of Al-Mg-(Ge,Si)-Cu Alloys
Observation of large Equilibrium Phase of Al-Mg-Si Alloys
Aging Precipitation of Al-Mg-Si Alloys with Additions of Ag and Cu
TEM Observation of Precipitate Structures in Al-Zn-Mg Alloys with Additions of Cu/Ag
TEM Observation of Precipitates in Excess Mg-Type Al-Mg-Si Alloys Aged at 473K after Deformation
TEM Observation for Precipitates Structure of Al-1.0Mass%Mg2Ge Alloys Aged at 473K
Nanocluster Formation and Two-Step Aging Behavior of Rapid Hardening Al-Mg-Cu(-Ag) Alloys
Behavior of Scandium in Aluminum Alloys of Different Alloying Systems
The Role of Vacancies in the Aging of Al-Mg-Si Alloys
Effect of Low Cu Addition and Thermo-Mechanical History on Precipitation in Al-Mg-Si Alloys
The Influence of High Plastic Strain on Precipitation from Solid Solution in Third Generation Al-Li Alloys
Effects of Pre-Aging and Natural Aging on Bake Hardening Behavior in Al-Mg-Si Alloys
Microstructures and Mechanical Properties of an Artificially-Aged Al-Mg-Ga Alloy
Investigation of the Precipitation Kinetics of a New Al-Mg-Sc-Zr Alloy
Strain Induced Rapid Precipitation in Al-Er-Zr Alloy
A New Ultrahigh Strength Al-Cu-Li Alloy
Influence of AlCuSc Ternary Phase on the Microstructure and Properties of 1469 Alloy
Chapter 11: Refining and Recycling
Lifecycle Assessment and Lifecycle Costing of Aluminium Wrought-to-Wrought Recycling
Salt Free Treatment of Aluminium Dross
Microstructure and Mechanical Properties of Ductile Aluminium Alloy Manufactured by Recycled Materials
Study of Metal Quality and Melt Yield from Remelts of (i) Turnings AA3005 and (ii) Coil AA3003
Model Experiment on Removal of Nonmetallic Inclusions by Bubble Flotation
Oxidation of Manganese-Containing Aluminum Alloys Studied by SEM
Chapter 12: Thermomechanical Processing
The Development of a Brazing Sheet Core Alloy with Excellent Post Braze Properties
Microstructure and Mechanical Properties of D-SSF Processed Al-Zn-Mg Alloys with High Fe Content
Melt Conditioned Twin Roll Casting (MC-TRC) for Aluminium Alloys
Effect of Thermomechanical Processing on Electrical and Mechanical Properties of Aluminum Conductor Alloys
The Effect of Homogenization Conditions on Extrusion Texture and Microstructure Evolution in AA3003
Dynamic Interactions between Precipitation and Plastic Deformation in Aluminium Alloys
The Evolution of Microstructure and Texture during Thermomechanical Processing of Al-Mg-Si-Cu Alloy
Influence of Alloying Elements and Processing in AA 8006-Alloys on Microstructure and Properties of Rolled Products
Effects of Cu or Li Addition and Multi-Step Aging Conditions on the Bake-Hardenability of an Al-Mg-Si Alloy
Experimental and Numerical Investigations of the Plastic Deformation during Multi-Pass Asymmetric and Symmetric Rolling of High-Strength Aluminum Alloys
Microstructural Evolution during Isothermal Annealing of a Cold-Rolled Al-Mn-Fe-Si Alloy with Different Microchemistry States
Effect of Zr Addition on Recrystallization Behavior of Extruded Al-Mg-Si Alloys Containing Mn
Serration and Reversion Treatment in Al-Zn Alloys
Characterisation of Al-Cu and Al-Mg-Si Free-Cutting Alloys
Effect of Extensive Isothermal Rolling on Microstructure and Mechanical Properties of an Al-Mg-Sc Alloy
Effects of Thermo-Mechanical Treatment on the Microstructure of AA7085 Aluminum Alloy
The Effect of Mn on Microstructure Evolution during Homogenization of Al-Mg-Si-Mn Alloys
The Effect of Elastic Straining on a 6060 Aluminium Alloy during Natural or Artificial Ageing
Effect of Surface and Grain Boundary on the Reversion of Al-Zn Alloys
Microstructure and Properties of Al-Mg-Si Wire-Rod Subjected to Continuous Heat Treatment
Self-Hardening Alloys for Automotive Application
Role of the Mn-Dispersoids and Mg2Si Particles in the Recrystallization of Automotive 6xxx Alloys
Formation of Microstructural Gradient of A2017 by RBT at Ambient Temperature
Ageing of Brazed Aluminium AA6xxx Alloys for Vehicle Radiators
A Study of Cube Grain Nucleation in a Commercial Al Alloy during In Situ and Discontinuous (Ex Situ) Annealing Experiments
The Effect of Intermediate Annealing Condition on Recrystallization Behavior in Continuous Cast Al-Mn Alloy
Recrystallization Behavior of Twin-Roll Cast 3xxx Series Aluminum Alloy
Effects of Deformation Heating on Constitutive Analysis of a New Al-Mg-Si-Cu Alloy during Hot Compression
Recrystallization Behavior of High-Strength AA 7075 Alloy Processed by New Short-Cycled Thermo-Mechanical Processing
Study on the Asymmetric Hot Rolling of Aluminium Alloy Thick Plate
