Selected, peer reviewed papers from the 2014 the 3rd International Conference on Advanced Materials Design and Mechanics (ICAMDM 2014), May 23-24, 2014, Singapore
Buch, Englisch, 594 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1150 g
ISBN: 978-3-03835-177-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Nanomaterials and Technologies
The Study of High Efficiency Photovoltaic Devices with Metal Nanoparticles
Thermal Bubble Nucleation in a Nanochannel: An Experiment Investigation
Effect of Cosurfactants on Pore Sizes of Continuous Highly Ordered Mesoporous Silica Nanofibers
Influence of Uniaxial Stress on the Stress-Strain Curve Measured by Nanoindentation
The Preparation and Characterization of ZnO/Graphene Nanocomposites
Study of Nano Coating Micron Calcite Reaction Process and Influence Factors
Resistances of Nano-Titanium Dioxide on the Ultraviolet Aging of Poly(butylene succinate)
Advances of Study on the Developments and Applications of Carbon Nanotubes
Monte Carlo Simulation of the Dispersion of Carbon Nanotubes in Cement Matrix
Preparation and Antibacterial Activity of Silver Doping Nano Zinc Oxide
Preparation of Amorphous Silicon Carbide Nanostructures via Solvothermal Method
Doped TiO2 Nanotube for Lithium Ion Battery
Chapter 2: Advanced Material, Composite Materials and its Applications and Technologies
Information Systems for Composite Materials: Requirements and Challenges
Mechanical Properties of DGEBA/Amidoamine Blend at Non-Stoichiometric Ratios
Research on Adsorption Kinetics Models’ Fitting Values of H2O2 Oxidated Loofah Sponge on Methylene Blue
Thermal Tuning of Vibration Band Gaps in Thin Phononic Crystal Plates with Nitinol
Synthesis of Cu2ZnSnSe4 Compounds Using Solvo-Thermal Method
The Effect of Guide Sleeves on Shear Behavior of 3D Weaving Composites
The Microstructure and Mechanical Properties Research of FeCrWMoV-Series High Temperature Self-Compensation Lubricating Composite Materials
Continuously Large-Scale Preparation of Multi-Layer Graphene Grown on Polycrystalline SiC Microspheres
Effects of Mechanical Alloying on Microstructure and Properties of Powder Injection Moulded SiCp-Reinforced Aluminium Composite
Hydrothermal Synthesis and Upconversion Properties of Yb3+, Tm3+ Co-Doped Gd6MoO12 Phosphor with Regular Morphologies
A First-Principles Study of Electron-Phonon Coupling of OsB2
Photoluminescence and Energy Transfer from Sm3+ to Eu3+ in Na3YSi2O7 Phosphor for Light-Emitting Diodes
Compressive Properties of Corevo® Foam under Uni-Axial Loading Based on Experimental and Numerical Analysis
Fine Spin Filtering Effect in Co-Phthalocyanine Molecule Induced by the Spin Polarization of Co Atom
Recent Developments in Molecularly Imprinted Solid Phase Extraction Technology
Effect of Cooling Rate on the Microstructures and Mechanical Properties of Mg-Y Alloys
Observation of Corrosion Resistance of 13Cr-2Ni-2Mo Stainless Steel Quenched by Induction Heating
Study on the Use of Fleshings-Derived Collagen in Post Tanning Operations
Chapter 3: Films, Coating and Surface Engineering
Ionic Distribution in Plasma for the Process of Electron-Beam Physical Vapor Deposition
Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process
Preparation, Characterization and Dielectric Property of Novel Poly(cyanate ester) Thin Films
The Influencing Factors for the Thickness of Silica Sol-Gel Film by the Dip Coating Process
Preparation and Properties of Pyrolytic Carbon Coating on Carbon Materials Used in Czochraski Single Crystal Silicon Furnace
Effects of Laser Parameters on the Formation of Al2O3-TiC Coating by Laser-Assisted Combustion
A Study on the Resistive Switching of La0.7Sr0.3MnO3 Film Using Spectromicroscopy
The Production of ITO Transparent Conductive Materials and the Development Prospect in the Field of Biological Information
Chapter 4: Machining and Forming Materials Technologies, other Manufacturing Technologies
A Method to Select Optimal Cutting Force Model Using the Measured Process Transfer Function
A Pre-Processing Method of ProCAST Based on Pro/E and HyperMesh
Assessment of the Influence of Welding Parameters on Distortion
Design and Optimization of Honeycomb Corrugated Chaff Forming Roller
Effect of Backplate Thermal Diffusivity on Mechanical Properties of Double Sided Friction Stir Welded Aluminum for Ship Structure
Study on External Grind-Hardening Experiments and the Analysis of Hardening Effects for 40Cr Steel
Study of Spatial Ellipsoid Helix Interpolation Algorithm Based on Multi-Axis Lathe
Research on Flange State during Spinning of AZ31 Magnesium Alloy Rotators
Numerical Simulation and Analysis for Blow-Off Flow Field of a Wet Skin Pass Mill
Molecular Dynamics Simulation of Two-Phase Structures of Copper Formed by Laser Grooving
Study on Optimal Spacing and the Residual Height Parameter of Blade Part in MASTERCAM
Effect of Preheat Temperature on Friction Stir Welded Aluminum Alloy 5052 Joints
FE Modelling of Residual Stresses and Validation Using Chip-Mechanism and Microstructural Analysis of Ultrasonic Vibration Assisted Turning of Ti Alloy Ti-6Al-4V
Research on Performance of Foundry Sand under the Effect of Chemical Binder
The Effect of the Initial Temperature of Ring Blank on Conical Ring Rolling Process
Effects of External Magnetic Field on Intensity of Plasma Flow
Formation and Distribution Mechanism of Intermetallic Compounds of Al/Mg Joint with Zn Transition Metal
Chapter 5: Applied Mechanics and Construction Engineering
Concrete Strength Variability in Italian RC Buildings: Analysis of a Large DataBase of Core Tests
Buckling Behavior of Catheter Reinforced with Braids under Axial Compression after Torsion: Effect of Deformation Speed on Buckling Region
Effect of Fiber Volume Fraction on Compressive and Flexural Properties of High-Strength Steel Fiber Reinforced Concrete
Analysis of Guyed Transmission Tower Dynamic Characteristic
Analysis of the Forms of Attachment Frame and Stress Characteristics
Damping Analysis of Laminated Plates Using Complex Stiffness Method
Influence of Axial Compression Ratio on Seismic Behavior of Reactive Powder Concrete (RPC) Beam-Column Joints
Influence of Curing Temperature on the Compressive Strength of High Performance Concrete
Mechanical Properties of Reactive Powder Concrete Containing Fly Ash under Different Curing Regimes
Static Stress Changes and Triggering Imposed by Wenchuan Earthquake on Lushan M7 Earthquake
Structural Behaviors of Non-Ductile Reinforced Concrete Frames with Engineered Cement Composite (ECC) Wing Wall Elements
The Influence of Base Pre-Tilting on the Dynamic Properties of Angle Towers
Stress Analysis and Structure Improvement on Arm of Ladle Turret
Cathodic Prevention and Cathodic Protection of Concrete Slab with Zinc Sacrificial Anode
Engineering Properties of Controlled Low-Strength Material Made with Residual Soil and Class F Fly Ash
On the Multiple Linear Regression and Artificial Neural Networks for Strength Prediction of Soil-Based Controlled Low-Strength Material
Measurement of Sliding Wear of Shot-Peened Partially Stabilized Zirconia Plate
Chapter 6: Robotics, Control System and Measurement Technologies
Application of Fuzzy Control Theory in Obstacle Avoidance Simulation of Intelligent Wheelchair
Research on Flexible Centroid Measurement Method for Segments of Large-Thrust Carrier Rocket
Simulation Research on the Compound Control System of Internal Model Add Feed-Forward Compensator
Wind-Induced Vibration Control for Transmission System Using Steel-Lead Viscoelastic Damper
Fuzzy PID Control of ABS Based on Real-Time Road Surface Identification
The Application Research of Non-Nuclear Density Gauge Electromagnetic Technology in the Road Engineering
Lie Algebraic Structure and Poisson Conservation Law for One Class of Multi-Dimensional Coupled Oscillators
Three-Level SVPWM Inverter with Li-Ion Battery Driven for Robot Motor
Development of Practical Wrist Rehabilitation Robot by Mirror Effect
K-MORE: Design of a Kinect Motion Oriented iRobotics Environment
Dynamic Control of Gait and Posture Training on Robot
Novel Strengthened Structure of Stair-Climbing Robots on Campus
Chapter 7: Electrical Devices and Embedded Systems, Machine Elements, Systems and Mechanisms
Computer Aided Design of a New Universal Clamping Mechanism
Experimental Study of Corrosion Sensors for the Design Technology of Bridge Longevity
A Theoretical Study of the Phase Angle for the ß Type Pulse-Steam Stirling Expander
Damage Identification of the Blade Based on Distributed Fiber Bragg Grating Sensors
Design of Electrochemical Biosensor on Naphthalene Content Detection in Water Based on SCM
Design of Reflective/Diffractive Objective Optical System for Handed Low-Light Night Vision Google
Fault Diagnosis of Mechanized Bridge’s Electrical System Based on I2C-bus and Virtual Instrument Technology
Meshing Efficiency of Involute Helical Gears Based on Elastohydrodynamic Lubrication
Research about Deformations Identification for Globoidal Cam Machine Based on Multi-Body System Theory
Selective Tension Apparatus Development of Vibration Membrane for Stereo Speaker Production
The Establishment and Weight Calculation Method of Evaluation Indexes for the Float Board Propulsion System
The Simulation Studies of PWM Voltage Source Rectifier under Unbalanced Grid Voltage
The Skimmer Selection Based on Fuzzy Decision in Response to Oil Spill
Research on Manufacturing of Blade Screw in Solid-Liquid Separator
VLC-LED Receiver Condenser with Optimized CPC
300 MW Coal Tangential Boiler Furnace Numerical Simulation
Optimization Design Analysis on Electrical Performance of ITER Axial Composite Insulation Break
Research on Overloading Protection of Permanent Magnetic Coupler in Coal Mine
The Research of Drive Roll’s Dynamics Characteristics
Analysis and Research on the Picking Roller of the Half-Feed Peanut Combine Harvester
Statics and Grasp Stiffness Analysis of an Underactuated Cable-Truss Mechanism
An All-Digital, Cyclic and Synthesizable TDC in the ADPLL-Based Clocking Digital Systems for Multidomain Power Management
Chapter 8: Vehicles, Transport and Navigation Development
A Novel Adaptive UKF and its Application in the SINS/GPS Integrated Navigation
A Variable Proportional Valve Braking Force Distribution Strategy Including SOC Constraints of Electric Vehicles
Finite Element Analysis of Key Component on Two Wheels Scooter
Multi-Objective Optimization for the Section Structure of Sandwich Plate Applied in the High-Speed Train Compartments
Secondary Developments of ANSYS for Temperature and Stress Field Simulation of Brake Disc Based on VB
Simplified Dynamics Modeling of Seat-Passenger in Vehicle Frontal Crash
Study on the Stress Variation Mechanism for the Rails under the Wheels Repeated Rolling Effects
SINS Transfer Alignment Based on Robust SDRE Filter
