Buch, Englisch, 590 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1140 g
Buch, Englisch, 590 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1140 g
ISBN: 978-3-03835-391-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizing Committee
Chapter 1: Corrosion and Surface Engineering, Corrosion Protection
Novel Concepts on the Growth of Corrosion Fatigue Small and Short Cracks
Corrosion Fatigue Crack Propagation Rates for Steam Turbine Blade 13% Cr Steels
Corrosion Behaviour of Amorphous and Nanocrystalline Alloys
Influence of Plastic Deformation on the Corrosion Behaviour of As-Cast AlMg2 and AlCu4Mg1 Aluminium Alloys in NaCl Solution
Influence of the Crystallographic Orientation of Grains and Plastic Deformation on the Electrochemical Behavior of Pure Aluminum in Sodium Chloride Solution
Structure and Corrosion Behavior of Mg-Cu-Y-(Zn,Ni) Bulk Metallic Glasses
The Influence of Deformation the Corrosion Resistance of Titanium Grade2
Influence of Ageing on the Corrosion Resistance of the ZnAl22Cu3 and ZnAl40Cu3 Alloys
Resistance to Electrochemical Corrosion of Extruded Magnesium Alloy AZ31
The Corrosion Processes Effect on Surface Roughness of Bonded Magnetic Material Based on Nd-(Fe,Co)-B Powder Type
The Influence of Reinforcement Purity on Corrosion Resistance of AM50/SiC Composites
The Properties of Refined Glasses with Aluminum Hydroxide Nano-Molecules
Corrosion Resistance of Sinters CNT-Cu/Cu
A Study on the Inhibition of J55 and P110SS Steel in 3.5% NaCl Solution Saturated with CO2 by Seed Extract of Momordica charantia (Karela)
Inhibition Effect of Guar Gum on the Corrosion Behaviour of Carbon Steel (K-55) in Fracturing Fluid
Investigation of Some Mannich Bases Corrosion Inhibitors for Carbon Steel
The Effect of Chloride Ions on the Passive Films of Titanium in Sulfuric Acids
Effect of Cadmium Addition on the Galvanic Corrosion of AM60 Magnesium Alloy in 0.1 M Sodium Chloride Solution
Studies on the Corrosion Properties of High-Mn Austenitic Steels
The Electrochemical and Immersion Corrosion of Casting Magnesium Alloys Containing Rare Earth Elements
Corrosion Behavior of MRI153M Magnesium Alloy in 3% NaCl Solution
Corrosion Behaviour of Magnesium Lithium Alloys in NaCl Solution
Corrosion of WE43 and AE44 Magnesium Alloys in Sodium Sulfate Solution
Electrochemical Corrosion Behaviour of Stainless Steels AISI 304 and 316L in Caribbean Sea Water
Adsorption Kinetics of Benzothiazole and 2-Mercaptobenzothiazole on Microcrystalline Gold and Silver Surfaces
Corrosion Resistance in Saline Environment of Colored Based Alumina Spectrally Selective Surfaces
The Effects of Inappropriate Corrosion Protection
The Effect of Ti and REE Addition on the Corrosion Resistance of the AlZn12Mg3.5Cu2.5 Alloy in "Acid Rain" Environment
Corrosion Resistance of AA2024-T3 Coated with Graphene/Sol-Gel Films
Corrosion Behavior of Hybrid Sol-Gel Films Reinforced with Electrospun Nanofibers
Epoxy-Polyelectrolite Composites as a Basis of Intellectual Coating for Protection from Underfilm Corrosion on Cathodically Polarizable Structures
Properties of Functional Epoxy Coatings Modified by Carbon Nanoparticles
Solid State NMR and EIS Examination of SiO2-Epoxy Hybrid Coatings on Stainless Steel
Anticorrosive Property of Potassium Dichromate Film on Galvanized Coating in Distilled Water
Anodic Treatment of Zn-Ni Alloy in Alkaline Solutions
Electrodeposition of Zinc Coatings from Ionic Liquid
Galvanic Formation of Zn-Ni/Zn-Co Type Multilayer Alloy Coatings on Steel Substrate
Microplasma Oxidation of Magnesium Alloy AZ91D by Impulse Current
XPS Study of Surface Layer Formed on AISI 316L after High-Current Density Electropolishing
Evaluation of the Growth Mechanism of Ti-Containing Conversion Coatings Using XPS
Corrosion Resistance of Cerium Based Silane-Zeolite Coatings on AA6061 Alloy
Corrosion Resistance of Copper Sheet after Laser Treatment
Thermally Sprayed Coatings as Corrosion Protection for Steel Structures – Influence of the Manufacturing Processes on the Coating Quality
Zirconium Modified Aluminide Coatings Obtained by the CVD Method
Study of Interaction between Liquid Magnesium Alloy and Glassy Carbon Particles
Chapter 2: Concrete Corrosion
Corrosion Inhibition of Concrete Steel-Reinforcement in Saline/Marine Simulating-Environment by Rhizophora mangle L.
Deterioration of Cement Composites with Silica Fume Addition due to Chemical and Biogenic Corrosion Processes
The Influence of Waste Expanded Perlite on Chemical Durability of Mortars
Corrosion Behavior of Hybrid Organic-Inorganic Coated Steel in Simulated Concrete Pore Solution
Mild Steel Passivation and Depassivation in Simulated Concrete Pore Solution Containing Bacteria Metabolites
Bio-Corrosion of Fibrous Cement Boards and Cement Composites
Chapter 3: Corrosion and Surface Engineering in Industry
Sulphur Species Corrosivity in Refinery Feed Stock
The Corrosion of HDG Zinc Coatings on the Road and Urban Infrastructures
Comparison of Human Health and Safety Loss due to Corroded Gas Pipeline Failure in Rural and Urban Areas: A Case Study in Malaysia
The Consequence Assessment of Gas Pipeline Failure due to Corrosion
Investigation of the Degradation Mechanism of Platinum-Rhodium Catalytic Wires during Oxidation of Ammonia Process
Properties of Rubber Lining after Sixteen Years Operation in Different Places of FGD Plant
Chapter 4: Atmospheric Corrosion, Tribocorrosion, Erosion, Hydrogen Degradation and Diffusion
Atmospheric Corrosion Protection of Metallic Structures Using Geocements-Based Coatings
Nanocomposite Layers Obtained by Electro-Co-Deposition: Corrosion and Tribocorrosion Properties
Microstructure and Tribocorrosion Properties of Titanium Matrix Nanocomposites Manufactured by Selective Laser Sintering/Melting Method
The Influence of Temperature on Erosion Resistance of Carbide Coatings Deposited by APS Method
Microstructural Phenomena Occurring during Early Stages of Cavitation Erosion of Al-Si Aluminium Casting Alloys
Hydrogen Diffusion Characteristics in the TRIP 800 C-Mn-Si Steel
Hydrogenation and Corrosion Properties of LaNi4.5Co0.5-Based Alloy Doped with 1.7 at% Sn
The Effect of Pre-Hydrogen Charging on Corrosion Behaviour of Superduplex Stainless Steel Welded Joints
Hydrogen Absorption by Co-Substituted Nd-Fe-B High Coercivity Magnetic Material
Nickel Electrode Precursor Covered by Pt, Ni and Pt/Ni Layers Using Sol-Gel Method
Chapter 5: Microbiological Corrosion
Inhibition of Steel-Rebar Corrosion in Industrial/Microbial Simulating-Environment by Morinda lucida
Growth of Acidithiobacillus thiooxidans Biofilm on Glass, Concrete and Stoneware
Differences between A. thiooxidans and A. ferrooxidans Biofilms Formed on Concrete and Stoneware
Microbiologically Induced Corrosion Monitoring Using Open-Circuit Potential (OCP) Measurements
Turbidity Method to Measure the Growth of Anaerobic Bacteria Related to Microbiologically Influenced Corrosion
Biofilm Formation on NiTi Surface by Different Strains of Sulphate Reducing Bacteria (Desulfovibrio desulfuricans)
Chapter 6: High-Temperature Corrosion and Surface Strength, Thermal Coating
The Effect of Pretreatment on the Corrosion Resistance of Superheater Materials
The Effect of the Aluminide Coating on the Thermal Properties and Oxidation Resistance of Inconel 625 Ni-Base Superalloy
The Formation of TBCs Using LPPS, CVD and PS-PVD Methods on CMSX-4 Single-Crystal Nickel Superalloy
The Influence of Overaluminizing on TGO Formation on Thermal Barrier Coatings Deposited by Low Pressure Plasma Spraying and Chemical Vapour Deposition Methods on Rene 80 Nickel Superalloy
Microstructure and Isothermal Oxidation Resistance of Thermal Barrier Coatings Deposited by LPPS, CVD and PS-PVD Methods on Inconel 617 Nickel Superalloy
Heat Resistance and Heat Capacity of the Selected Nickel Superalloys
Microstructure of Thermal Barrier Coatings Deposited by Low Pressure Plasma Spraying and Chemical Vapour Deposition Methods on Rene 80 Nickel Superalloy
Evaluation of Hot Corrosion Resistance of Directionally Solidified Nickel-Based Superalloy
The Impact of the Organic Form of Sulphur Originating from Coal on the Performance of Solid Oxide Fuel Cells
Oxidation Behavior of Aluminide Coated Ti-Al-Cr-Nb-Zr-Y Alloys at High Temperatures
Degradation of Diffusive Aluminide Coating after Service in ZhS6K Superalloy
Hafnium Modified Aluminide Coatings Obtained by the CVD and PVD Methods
The Influence of Activator on Vapour Phase Aluminizing of TiAl Intermetallics
The Oxidation Resistance of Nonmodified and Zr-Modified Aluminide Coatings Deposited by the CVD Method
The Influence of the Chemical Composition of Superalloys on the Oxidation Resistance of Aluminide Coating
Influence of Deposition Parameters on Structure of TDCs Deposited by PS-PVD Method
Microstructure of TBC Coatings Deposited by HVAF and PS-PVD Methods
The Technology of TBC Deposition by EB-PVD Method
Analysis of Crystallite Size Changes in an Oxide Layer Formed on Steel during Long-Term Operation at an Elevated Temperature
Influence of Surface Condition on Oxides Layer Morphology on NiCrAlY Coating during Oxidation at Temperature 1000°C and 1100°C
Studies on the Adhesion of Oxide Layer Formed on Steel Long-Term Operated at an Elevated Temperature
Comparison of High-Temperature Oxidation Onset Behavior of Sanicro 28 Steel with KCl, NaCl and K2CO3
Evaluation of High-Temperature Corrosion on 16Mo3 Steel Long-Term Operated at an Elevated Temperature
High-Temperature Corrosion Resistance of Welded Joints in Sanicro 25 Steel
High-Temperature Corrosion Resistance of Welded Joints in HR6W Alloy
The Morphology of Corrosion Products in FeAl Alloys after Heat-Resistance Tests at Different Temperatures
Thermal Properties of YSZ Powders for Plasma Spraying
Oxidation Resistance of Diffusion Silicide Coatings on Mo and TZM Alloy
Nonstoichiometry and Chemical Diffusion in Co3O4 Cobalt Oxide
Process Temperature Effect on Surface Layer of Vacuum Carburized Low-Alloy Steel Gears
Chapter 7: Corrosion of Biomaterials
Corrosion and Mechanical Behavior of Biodegradable Metallic Biomaterials
Corrosion Behaviour of Ti6Al4V and TiMo10Zr4 Alloys in the Ringer’s Solution: Effect of pH and Plastic Strain
Corrosion Study of Amorphous Mg67Zn29Ca4 Alloy
Effect of Polarization Scan Rate on the Pitting Potential of the Self-Passivated NiTi Shape Memory Alloy in a Simulated Body Fluid
Electrochemical Behavior of Materials Used in Dental Implantological Systems
Electrochemical Behaviour of Co-Cr and Ni-Cr Dental Alloys
Fretting – Corrosion of Co-Cr-Mo Alloy in Oral Cavity Environment
Improvement of the Corrosion Resistance of Biomedical Magnesium Alloys in the Ringer’s Solution Using Protective Coatings
Influence of Ultrasound Bone Union Stimulation on Corrosion Resistance of Titanium Alloys
Corrosion Properties of Anodically Oxidised and Alkaline Treated Titanium Nitride
Corrosion Properties of Plasma Oxidized Titanium Nitride for Biomedical Applications
Corrosion Properties of Oxide Layers Produced on Titanium Nitride by Means of Plasma Electrolytic Oxidation of Various Duration
Effect of the High Voltage Anodic Oxidation on the Titanium Corrosion Resistance
Corrosion Resistance of Ti6Al7Nb Alloy after Various Surface Modifications
Electrochemical Properties of cpTi with Modified Surface Used for Implants in Blood and Vascular System
Impact of Surface Modification of Ti-6Al-7Nb Alloy on Electrochemical Properties in the Environment of Artificial Blood Plasma
Increasing the Surface Functionality of Mg Alloys by Means of Plasma Electrolytic Oxidation
Influence of Electrolytic Polishing and Anodic Passivation on Corrosion Resistance of Ti-15Mo Alloy
Corrosion Behaviour of Thermodiffusion Coatings on Titanium Implants in Simulated Body Fluids
Corrosion Behavior of a Novel Hybrid Co/UHMWPE Composite Biocoating with Potential Application as a Biomaterial
Potential of Superhydrophobic Layer on the Implant Surface
Electrochemical Impedance Spectroscopy Behaviour of NdFeB Coated Magnets in Saliva Solution for Orthodontic Applications
Corrosion Properties of Ti Scaffolds Prepared with Sucrose as a Space Holder
Corrosion Resistance of Hip Endoprosthesis Cups in the Initial State and after Implantation
Effect of Artificial and Inflammatory Saliva on Desulfovibriodesulfuricans Growth and Biofilm Formation on NiTi Alloy
Effects of Sn and Mo Contents on the Electrochemical Behavior of Biomedical Ti-Mo-Sn Alloys Prepared in the Powder Metallurgy Process
Chapter 8: Testing Methods
Experimental Corrosion Tests on Weathering Steel Bridges
Application of Research Methods in Expert Opinions
Detection of the Corrosion of Axisymmetric Elements by Means of the Eddy Current Testing Method
Application of the Electrochemical Microcell Technique in Solid State Surface Analysis
The Concept of Using Model Gas Turbine for Burner Rig Corrosion Test
Machine Vision System for Corrosion Detection as an Additional Tool beside EIS for Evaluation of Protective Properties of Electrolessly Deposited Ni-P Coatings
Equipment for Low Pressure Plasma Spraying Processes – A Review
