Sonstiges, Englisch, Band Volume 922, 900 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 922, 900 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-769-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Cytocompatibility of Magnesium-Zinc-Calcium Alloys with Bone Marrow Derived Mesenchymal Stem CellsSimulation of Yield Strength in Allvac? 718PlusTMCorrosion Behaviour of AISI 304 Stainless Steel with Solar Salt Heat Transfer FluidComparison of Material Flow Stress Models toward More Realistic Simulations of Friction Stir Processes of Mg AZ31BCharacterization of Morphology Controlled Fluorine-Doped Tin Oxide Thin FilmsMartensitic Transformation and Related Properties of AuTi-FeTi Pseudobinary AlloysA Phase-Field Model for the Formation of Martensite and BainiteApprovement of ?Tension-Compression? Technique Developed for Physical Simulation of Multistage Metal Plastic Deformation ProcessingA Positron Emission Particle Tracking (PEPT) Study of Inclusions in Liquid Aluminium AlloyInfluence of Deformation Rate on Mechanical Response of an AISI 316L Austenitic Stainless SteelMicrostructure Evolution of Martensitic Ti-6Al-4V Alloy during Warm DeformationHigh Temperature Oxidation Behavior of CM-247LC Nickel Base SuperalloyHybrid Structure of TiO2 Nanofiber and Nanoparticle for Dye-Sensitized Solar CellsEffect of TiO2 Nanotube Arrays on Osseointegration for Dental ImplantStructure, Microstructure, and Selected Mechanical Properties of Ti-Zr-Mo Alloys for Biomedical ApplicationsEffects of Annealing on Microstructure and Properties of Cu-Nb WiresMechanical Properties and Precipitation Behavior of Ti-Mo Microalloyed Medium-Carbon Steel during Ultrafast Cooling ProcessNew Generation TMCP Technology and its Application to 960 MPa High Strength Structural Steel PlatesEvaluation of the Effect of TiC Precipitates on the Hydrogen Trapping Capacity of Fe-C-Ti AlloysEffect of Tensile Twinning on Low Temperature Shear Formability of Mg-3Al-1Zn AlloyStudy of the Influence of Plastic Deformation on Metastable Phases of CuAlBe Shape Memory Alloy by Neutron DiffractionHall-Petch Relationship in an Al-Mg-Sc Alloy Subjected to ECAP
In Situ Synchrotron Diffraction Studies on Hot Deformation of Austenite in a High Strength Quenched and Tempered Structural SteelElectrothermomechanical Processing of High Carbon SteelsEffect of Zr Addition on Martensitic Transformation in TiMoSn AlloyLife Prediction of High-Temperature?MCrAlY Coatings Based on Microstructural ObservationsOccurrence of Dynamic Alpha-Phase Nucleation in Ti-5553 during Hot DeformationEvolution of Laves-Phase Particles in a Low Carbon 9%Cr Martensitic Steel during Creep at 650?CEmbrittlement of Steels by Liquid Zinc: Crack Propagation after Grain Boundary WettingX-Ray Residual Stress Analysis of Stainless Steel Using cosa MethodMonitoring of Tempering Behavior in Fe-C-Mn Alloys by Precise Measurement of Electrical ResistivityResidual Stress Measurements in Multi-Pass Welded High Strength Steel Using Energy Dispersive Synchrotron X-Ray DiffractionEffects of Thermomechanical Treatments on Microstructure and Mechanical Behavior of HCS/LCS BimetalEffect of Plastic Deformation on a Dispersion of Omega-Phase and Mechanical Properties of an Al-Cu-Mg-Ag AlloyEffect of Carbon Gradient on the Microstructure and Mechanical Properties of Fe-22Mn-C TWIP/TRIP SteelsRelevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of SteelThermomechanical Ageing of Copper-Clad Aluminum Wires Submitted to Creep Test ConditionsApplication of Texture Analysis for Optimizing Thermo-Mechanical Treatment of a High Mn TWIP SteelCu/Cu Direct Bonding by Metal Salt Generation Bonding Technique with Formic Acid and Citric AcidInfluence of the Partitioning Treatment on the Mechanical Properties of a 0.3C-1.5Si-3.5Mn Q&P SteelPossible Orbital-Ordered State in the Highly-Correlated Electronic Material Sr1-xCexMnO3Preparatory Electrodeposition Process for High Purity Bulk AluminumMicrostructure of Oxide Scale on Hot-Rolled IronStructural Analysis of Shape Memory GelOptimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface ModelDetermination of Preferred Morphology of Self-Accommodating Martensite in Ti-Nb-Al Shape Memory Alloy Using Optical MicroscopyCompression of Single-Crystal Micropillars of the G Intermetallic Phase in the Fe-Zn SystemPolymer/Metal Joining with Carbon Fibers with High Resistance to Pull-Out Induced by Huge Friction Force Generated by Extremely Broad Total Interface AreaX-Ray Residual Stress Analysis of Nickel Base AlloysEffect of Process Parameters on Friction Surfaced Coating DimensionsFeasibility Study on Die Quenching of AA2024 Aluminum Alloy Billet Using Servo PressInvestigation of Biodegradable Composite Coated Magnesium Alloy Using Optical Coherence TomographyEffect of Retained Austenite on Impact Toughness of the Multi-Phase Bainitic-Martensitic SteelEffect of Precipitation on Texture Evolution during Dynamic Recrystallization in Mg-Al-Sn AlloysThermodynamic Modeling and Experimental Measurement of Precipitation Formation during Dynamic Recrystallization for Magnesium AlloysTempering of Direct Quenched Low-Alloy Ultra-High-Strength Steel, Part I ? MicrostructureEffects of Ni and Co Additions to Filler Metals on Ag-Brazed Joints of Cemented Carbide and Martensitic Stainless SteelEffect of Small Addition of Si on Superplastic Elongation at Room Temperature in Zn-Al Eutectoid Superplastic AlloyUltrasonic Spot Welding of Galvanized Steel SheetThe Age-Hardening Mechanism of Nanocrystalline Ni-P Alloys Synthesized by ElectrodepositionMicrostructural Evolution of AA5052 Alloy Sheets in High-Speed RollingStrengthening and Toughening Mechanisms in Martensitic SteelHybrid Structure of TiO2 Nanofiber and Nanoparticle for Dye-Sensitized Solar CellsContributions of Grain Boundary Sliding and Solute Drag Creep to High-Temperature Ductility in Fine-Grained Polycrystalline 5083 AlloysEffects of Cooling Rate on Impact Toughness of an Ultrahigh-Strength TRIP-Aided Martensitic SteelRelationship between Strength and Grain Size of Friction Stir Processed and Annealed High Purity AluminumCrystallographic Features of the Charge-Orbital-Ordered State in the Highly-Correlated Electronic System Ca1-xPrxMnO3Numerical Analysis of Gas Tungsten Arc Welding with a Constricted Nozzle for Butt Joint of Thin-Sheet MetalsEffect of Cold Rolling on Microstructure and Mechanical Properties of an Al-Mg-Sc-Zr AlloyEffect of Cold Rolling on Microstructure and Mechanical Properties of a Fe-23Mn-0.3C-1.5Al TWIP SteelThe Influence of Morphology on the Hydrogen Storage Properties of Magnesium Based Materials Processed by Cold RollingThermo-Kinetic Simulation of the Yield Strength Evolution of AA7075 during Natural AgingMicrostructural Characterization of Hydrogen Induced Cracking in TRIP Steels by EBSDPhase Transformations of TIMETAL-18 as a New Titanium Alloy with Bimodal MicrostructureWear Properties of Ti-6Al-4V/Ti-29Nb-13Ta-4.6Zr Combination for Spinal ImplantsThe Effect of Si on the Intermetallics Formation during Hot Dip AluminizingAnodic Bonding Mechanism of Pyrex Glass and Kovar Alloy and its Residual Stress AnalysisEffects of Electropulsing on the Microstructure Evolution of 316L Stainless SteelDescription of Surface Energy Anisotropy for BCC MetalsStudy of Damage Mechanisms in Cold-Sprayed 316L-Matrix Composite Coatings Using Novel Impact-Sliding TestingEffect of Strain Hardening on the Joint Efficiency of an Al-Mg-Sc-Zr Alloy Subjected to Friction Stir WeldingMorphology of Edge Cracks of Rolled Magnesium Alloy SheetEffect of Composition and Thermo-Mechanical Processing on Microstructure Development in Ni-30Fe-Nb-C Model AlloysMagnetic Pulse Spot Welding: An Innovative ApproachEffect of HPT on Age-Hardening Behavior in Cu-Added Excess Mg-Type Al-Mg-Si AlloysSolid State Bonding of Al Alloy/SUS304 by Metal Salt Generation Bonding Technique with Acetic AcidHigh Tensile Ductility in Electrodeposited Bulk Nanocrystalline Ni?W AlloysHRTEM Observation of Age-Precipitation in Mg-2.9at.% AlloysExperimental and FEM Studies of the Relationships between Equal-Channel Angular Pressing Die Design, Strain Distribution and Pressing ForcesSurface Characterization of Magnesium Anodized in a 10M KOH ElectrolyteEffect of Axial Force on Corrosion Behavior of SUS304 Stainless Steel BoltCrystallographic Features of the?? Phase in the Mn-Si Binary Alloy SystemFinite Element Analysis of Material Flow and Characterization of Tube Dimensions of Indirectly Extruded Tailored Aluminum TubesEffect of Rolling on Microstructure and Room Temperature Tensile Properties of Newly Developed Mg-4Li-1Ca AlloyCharacterization of Magnesium Alloy Degradation in Whole Blood and Platelet Rich PlasmaEffect of Zn/Mg on Age Hardening Behavior in 7000 System Al AlloysA Review on Thermomechanical Models of Friction Stir WeldingEffect of Cu/Ag Addition on Age-Precipitation in Two Step Aged Al-Mg-Si AlloysCost Cut with High Impact Value of Sandwich Structure with Inexpensive ABS Core between High Strength CFRP Laminate PliesMicrostructural Control of Ductile Crack Propagation in TMCP HSLA Pipeline SteelsInfluence of Impurities on Mechanical Properties of Electrodeposited Bulk Nanocrystalline AlTempering of Direct Quenched Low-Alloy Ultra-High-Strength Steel, Part II?? Mechanical PropertiesModeling Mechanical Milling Process for Synthesis of Graphite Nanoparticles and their CharacterizationAnalysis of Plastic Deformation and Sample Geometry during the Compression Stage in High-Pressure TorsionOn the Behavior of Yttria/Yttrium during Mechanical Alloying of a Fe - Y2O3 Model Alloy SystemInteraction of V, Al, and N in Microalloyed Forging Steels after Hot DeformationAn Investigation of Mechanical Properties and Microstructural Evolution in an Aluminum Alloy Processed by Severe Plastic DeformationInfluence of Low Cu Addition on Quench Sensitivity in Al-Mg-Si AlloysEffect of Heat Treatment Condition on Texture in Ti-Mo-Al-Zr Shape Memory AlloyCharacteristic Features of the C-Type Orbital-Ordered State in the Simple Perovskite Manganite Sr1-xNdxMnO3Effect of Uniaxial Compressive Stress during Formation of Porous Aluminum by Mechanochemical Reaction on its Mechanical PropertiesVariation of Mechanical Properties of AlSi20Cu2Ni1 Alloy with Co Addition and Ultrasonic TreatmentDetermination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel MatrixStructure and Properties of Cu Alloys Alloying with Cr and Hf after Equal Channel Angular PressingEffect of Annealing on Microstructure of Hydroxyapatite Coatings and their Behaviours in Simulated Body FluidInfluence of Filler Rod Composition on the Strength of Tungsten Inert Gas Welded Magnesium Alloy JointMicrostructure of Er2O3 Coating Layer of Hydrogen Penetration ControlDesign and Fabrication of New Ti-Based Ternary Metallic Glasses Based on Effective Atomic Radius in the Ti Solid Solution Calculated by Ab Initio CalculationThe Correlation between Stacking Fault Energy and the Work Hardening Behaviour of High-Mn Twinning Induced Plasticity Steel Tested at Various TemperaturesCombined Martensite and Bainite Formation from Austenite Decomposition in HSLA SteelMicrostructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid Cast ZK60-RE Magnesium AlloyCasting in the Semi-Solid State of ZK60 Magnesium Alloy Modified with Rare Earth AdditionAnalysis of Recrystallization and Strain-Induced Precipitation on High Nb- and N-Bearing Austenitic Stainless SteelTwo-Step Brittle-to-Ductile Transitions in Pearlitic SteelsEffect of Cobalt Addition on the Deformation and Recrystallization Textures of Polycrystalline IN713C Nickel Based SuperalloyMicrostructural Evolution of Martensite Phase in Fe-Ni Alloy Depending on Temperature of Tensile DeformationCorrosion Behavior of Engineering Materials in Flow FieldSimulation of Cu Precipitation in the Fe-Cu Binary SystemPlastic Deformation and Elastic Properties of Ti-Nb-Zr-Ta(-Fe-Si) Biomedical AlloysClarification of Extremely High R-Value Mechanism of the Electro-Deposited Pure IronEffect of Si and Ge Addition on the Evolution of Microstructure in Near Alpha Titanium AlloyDislocation Creep in Al-22.2, 53.6 and 101 at.ppm Fe Solid Solution AlloysThe Effects of Heating Rate and Cold Work on the Development of Dual-Phase Steel MicrostructuresElectrophoretic Deposition and Characterization of Biocomposites on Magnesium for Orthopedic ApplicationsMechanical Properties of ZK60 Magnesium Alloy Processed by High-Pressure TorsionEffect of Cooling Rate after High Temperature Nitriding on Transformation Microstructure in Low Carbon Steel
In Situ Observation of Fracture Behavior of CrN/Cr Film during Three-Point Bending TestElemental Clustering and Structure of Liquid LBETEM Observation for Precipitates Structure of Aged Al-Zn-Mg Series Al Alloys Addition of Cu or AgModelling High Integrity Steel Forgings for Turbine Applications in the Power Generation IndustryApplication of a Novel Entrainment Defect Model to a High Pressure Die CastingConstitutive Analysis and Microstructure Evolution of the High-Temperature Deformation Behavior of an Advanced Intermetallic Multi-Phase ?-TiAl-Based AlloyBainitic Forging Steels for Cyclic LoadingTensile Fracture Characteristics of a Single Crystal Nickel-Based SuperalloyNitrogen-Enhanced Nanostructural Evolution and its Effect on Phase Stability in Biomedical Co-Cr-Mo AlloysInterface Migration with Segregation in MoSi2-Based Lamellar Alloy Simulated by Phase-Field MethodEB-Irradiation Induced Strengthening of Carbon Fiber Reinforced Thermoplastic PolymersMechanical Properties at Elevated Temperatures of an S304H-Type Austenitic Stainless Steel Processed by Warm RollingInterdiffusion and Microstructure Simulation in Ni and Co Based Overlay Coatings on a Ni Based Superalloy at High TemperaturesMicrostructural and Mechanical Characterizations of a Ductile Metastable ? Titanium Alloy Subjected to Low Temperature AnnealingEffect of Grain Size on Cryogenic Mechanical Properties of an Al-Mg-Sc Alloy
