Sonstiges, Englisch, Band Volume 699, 1076 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 699, 1076 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03859-019-4
Verlag: Trans Tech Publications
The 43 papers are grouped as follows:
Chapter 1: Advanced Materials and Processing Manufacturing Technologies,
Chapter 2: Applied Materials and Applied Mechanics, Materials Development and Fabrication,
Chapter 3: Renewable Energy Engineering and Applications,
Chapter 4: Diesel and Fuel, Engines and Combustion,
Chapter 5: Resources Engineering and Applications,
Chapter 6: Power and Electrical Engineering, Automation and Control,
Chapter 7: Energy and Power Management, Energy Saving Technologies and Applications,
Chapter 8: Instrumentation, Sensors, Detection Technologies, Measurement,
Chapter 9: Environmental Engineering and Technologies, Health and Waste Management.
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Umwelttechnik | Umwelttechnologie Umwelttechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Technik Allgemein Nachhaltigkeit, Grüne Technologien
- Technische Wissenschaften Energietechnik | Elektrotechnik Alternative und erneuerbare Energien
Weitere Infos & Material
Effects of Helix Angle on Cutting Performance for Machining Thin-Wall Aerospace Monolithic ComponentThe Effect of Ceramic Substrates Surface Roughness on the Deposition of AgTiO2 CoatingsEffect of Curing Conditions on the Mechanical Properties of Fly Ash-Based Geopolymer without Sodium Silicate SolutionEffect of Injection Moulding Machine Parameters on the Warpage by Applying Taguchi MethodThe Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminum CompositeEffect of Concentration and Time Factors on Carbon Nanofiber Supported Iron Catalyst Preparation by Incipient WetnessInfluence of Surface Treatment on the Surface Energy of Tungsten Carbide InsertsMeasurement of Twist Springback on AA6061-T6 Aluminum Alloy Strip - A Preliminary ResultThiosulfinates Concentration in Garlic Extract at Different Storage TemperaturesInvestigation of Photocatalytic Activity of TiO2-PANi NanocompositesV-Bend Die Forming Performance of Oil Palm Fiber CompositeThe Study of Tool Wear Performance on Pocket Milling StrategySpin Coating Deposition of c-Oriented Wurtzite Gallium Nitride Thin FilmA Study of Microstructure Properties of AISI D2 Tool Steel in Partial Re-Melting MethodEffect of Temperature and Pressure on Spray Properties of Tapioca Starch AdhesivesPhysical and Chemical Activation Effect on Activated Carbon Prepared from Local Pineapple WasteEffect of Alkali and Water Content on Setting Time and Strength of Fly Ash Based GeopolymerA New Method in Producing Ni Deposited Hydroxyapatite Composite by Modification of Electroless Deposition TechniqueEffect of Heat Treatment Parameters in Plasma Arc Surface Hardening of AISI 4340 SteelUrea Hardness Optimization in a Fluidized Bed Coating Equipment Using Taguchi Design MethodEffect of Heat Treatment on Properties of Kenaf Fiber Mat/Unsaturated Polyester Composite Produced by Resin Transfer MoldingOptimization of Cu/TiO2 Preparation Variables Using Response Surface Method for Photodegradation of DiisopropanolamineThe Effects of Fiber Content in Plasticized Polyvinyl Alcohol (PVA) - Sweet Potato Peel BlendsSynthesis of Carbon Nanotubes from Rich Premixed Propane/Air FlameRemoval of Reactive Dye from Artificial Textile Effluent by Corncob: An Agro Solid WasteEffect of Reprocessing Palm Fiber Composite on the Mechanical PropertiesGrain Size Effects on the Oxidation of Fe-33Ni-19Cr Alloy at 700?CEffect of Stannum on Properties of Graphite/Stannum Composite for Bipolar PlateCharacterization of Wet Impregnation Method for Catalytic Microcombustor by Using PlatinumEffect of Weld Side Combination on Mechanical Properties of Double Sided Friction Stir Welded 5083 Aluminum AlloyCharacterization of Nanoclay-Modified Epoxy Polymers Using X-Ray Diffraction AnalysisFacile Preparation of Co3O4 Nanoflower through Forced HydrolysisSynergistic Effect of Thiourea and Surfactants on Corrosion Inhibition of Stainless Steel-410 in Presence of Sulfuric AcidDetermination on the Effect of Cutter Geometrical Feature for Machining Polyetheretherketone (PEEK) Using Taguchi MethodsOptimisation of Machining Parameters for Milling Polyetheretherketones (PEEK) BiomaterialWater Uptake Behavior of Lignin Modified Starch FilmPhotocatalytic Oxidative Desulfurization of Model Oil Using Cu/TiO2 Photocatalyst and Eutectic Based Ionic Liquid: Effect of Metal LoadingCorrosion Analysis of Carbon Steel Pipeline: Effect of Different Sulfuric Acid ConcentrationsEmpirical Equilibrium Study on Rice Husk and Eggshells as Low Cost Bioadsorbent for the Methylene Blue RemovalThe Effect of Heat Treatment on Fatigue and Mechanical Properties of 6061 Aluminium AlloySynthesis and Phase Behaviors of New Heterocyclic Liquid Crystals: Nematic and Smectic PropertiesDynamic Mechanical Analysis of Nanosilica Filled Epoxy NanocompositesSynthesis and Characterization of Hollow Anatase TiO2 Spheres and its Application in the Photodegradation of ?-Lindane under Ultraviolet LightEffect of Pouring Temperature and Cooling Slope Length on Microstructure and Mechanical Properties of Rheocast A319 Aluminium AlloyEffect of Relative Humidity on Drying Kinetics of Agricultural ProductsThermal Reliability of Paraffin Wax Phase Change Material for Thermal Energy StorageThe Effects of Alkali Silica Reaction (ASR) towards Fly Ash Based Geopolymer ConcreteReview on Reinforcement of Aerogel for Development of Advanced Nano Insulation Material for Application in Sustainable BuildingsNon-Parametric Modelling and Validation of Magnetorheological Damper for Lateral Suspension of Railway Vehicle Using Interpolated Sixth Order PolynomialFabrication of PDMS Dome-Shaped Membrane and its Performance Analysis Using FEA for Fluidic Based Flow SensorJ-Integral Prediction for Semi-Elliptical Surface Cracks in Round Bars Subjected to Torsion MomentCFD Model Validation for Charging and Discharging of a PCM Encapsulated in SphereEffect of Shear Rate on Characteristics, Performance and Morphology of Polysulfone Blend MembranesInvestigation on the Fretting Wear of a Coated Substrate: Interlayer Stress BehaviourPreparation and Properties of Silica Inverse Opal via Self-AssemblyPreparation and Characterization of Newly Developed Polysulfone/Polyethersulfone Blend Membrane for CO2 SeparationModeling of Mullins Effect on Laminated Rubber-Metal SpringPreparation of Macroporous Ceramic Materials by Using Aluminium Powder as Foaming AgentDevelopment of Fly Ash Based Geopolymer as Erosion Mitigation CoatingStudy the Potential Application of Smart Fluid Material and Force Tracking Control of Magnetorheological DamperFatigue Life Analysis of High Performance Motorcycle Disc BrakeDevelopment and Testing of Intumescent Fire Retardant Coating on Various Structural GeometriesApplicability of Alumina Nanofluid in Direct Absorption Solar CollectorsFinite Element Modeling and Simulation of Thermal Distribution on Full and Ventilated Electric Vehicle Disk BrakeInvestigation on the Interaction between Plasticity Response and Fretting Wear under Partial Slip ConditionPreliminary Study of Alternative Wall Insulation Materials for Home ResidenceIntegral Pile-Backfill Soil Relationship in Stub-Type Integral Abutment BridgeA Simplified Life Cycle Analysis of an Automotive Parking Brake Lever Using Polymer CompositesDetermination of Dielectric Properties of Bismuth Titanate (BiT) Ceramic Material for WiMAX/WLAN AntennaAn Experimental on Honeycomb Core in the Axial Direction under the Quasi-Static LoadingTensile Strength Test of Photo Biocomposites for Application in Biomedical MaterialsVortex Formation for Different Geometry of Cavities Using High Reynolds NumberEffect of Varying Inflow Reynolds Number on Pressure Recovery and Flow Uniformity of 3-D Turning DiffuserMixing Quality Improvement of a Coaxial Syngas Mixer by Adding Optimized Mechanical Tabs Using Three-Dimensional CFD ModelingCFD Analysis on the Flat Runner Blades of Propeller?s Turbine under Low Head and Low Flow ConditionComparison between Sunflower Oil and Soybean Oil as Gear LubricantDrying of Oil Palm Fronds Using Concentrated Solar Thermal PowerThermal Efficiency of the Photovoltaic Thermal System with Serpentine Tube CollectorTechnical Impact of PV Penetration on Distribution Network under Various Load LevelsThermal Modeling of Photovoltaic Thermal System with Polymer Sheet in Tube Absorber CollectorAn Overview of Hydrogen Production from Renewable Energy Source for Remote Area ApplicationPreliminary Study of Oil Palm Frond Briquette as Biomass Fuel for GasificationHarmonic Performance of Grid-Connected PV System under Various Penetration LevelsThe Investigation of Coupling-Unwanted Signal to the Solar Panel Material due to Induced Overvoltage Created by Short Spark GapRegenerative Energy Air Flow System for Cooling TowerActivity of Copper and Nickel Loaded on HZSM-5Zeolite Based Catalyst for Steam Reforming of Glycerol to HydrogenSimulation of Enriched Air-Steam Biomass Gasification in a Bubbling Fluidized Bed GasifierFabrication of Organic Dye Sensitized Solar CellStudy of Enhanced Reactive Extraction Process Using Ultrasonication for Jatropha curcas SeedFuel System Response of a Common Rail Passenger Car Engine Fuelled with Palm Oil BiodieselGasification of Empty Fruit Bunch Briquettes in a Fixed Bed Tubular Reactor for Hydrogen ProductionPerformance Evaluation of Dye Sensitized Solar Cell for Varying TiO2 ThicknessesPerformance Assessment of Slip Mode Frequency Shift (SMS) Islanding Detection MethodsProduction of Biodiesel from Waste Cooking Oil via Ultrasonic-Assisted Catalytic SystemMathematical Modeling of Thermoelectric Generator with Solar Parabolic DishEstimating Daily Solar Radiation Using Hargreaves Model in Eastern MalaysiaPerformance Comparison for Parabolic Dish Concentrating Solar Power in High Level DNI Locations with George Town, MalaysiaEffect of Natural and Synthetic Dyes on the Performance of Dye-Sensitized Solar Cells Based on ZnO Nanorods SemiconductorDevelopment of Hybrid Photovoltaic-Wind System for LED Street LightingThree-Phase Supply for Solar Application with MPPT ControllerThe Potential Energy of Plastic Solid Waste as Alternative Fuel for Power Plants in IndonesiaThe Structural Analysis of a Mini Hydroelectric SystemLandfill Gas Detection in Leachate Pipe: A Consideration for Design Improvement of Leachate Piping and Gas Venting SystemsDesign and Simulation of Small Heliostat Field at Universiti Teknologi PETRONAS CampusA Linear Programing Approach for Landfill Gas Utilization for Renewable Energy ProductionOptimization of In Situ Methanolysis of Jatropha curcas SeedsPt-Based Catalytic Microcombustor for Micropower GenerationNew Design of a Low Cost Small Engine Dynamometer for Engine TestingEffect of H2 and CO Content in Syngas on the Performance and Emission of Syngas-Diesel Dual Fuel Engine - A ReviewAn Experimental Study on the Performance and Emissions of Diesel Engine Fuelled with Biodiesel Derived from Palm OilMinimum Air Fluidization Velocity Study of Specific 2-D Bubbling Fluidized Bed ReactorN-Hexane, Methyl Ethyl Ketone and Chloroform Solvents for Oil Recovery from Refinery WasteAnalysis Opacity and Size of Soot Particles in Fuel of Diesel EngineDesign and Stress Simulation of Crankshaft for Slider-Crank Drive Stirling EngineThe Influence of Orifice Insertion for Low Noxious Emissions from Combustion SystemPreparation of Polymer Composite Bipolar Plate with Different Multi-Filler for Polymer Electrolyte Membrane Fuel Cell (PEMFC)An Investigation of a Self-Pressurized Alpha V-Type Stirling Engine Converted Diesel EnginePredicting the Performance and Emissions Characteristics of a Medium Duty Engine Retrofitted with Compressed Natural Gas System Using 1-Dimensional SoftwareThe Use of Untreated Waste Cooking Oil and Diesel Fuel Blends as IC Engine FuelsExperimental Study on Laminar Flame Speeds and Markstein Length of Methane-Air Mixtures at Atmospheric ConditionsSynthesis of Activated Carbon from Coal for Enhancing Hydrogen Content in Syngas from Co-Gasification of Rice Husk and CoalCFD Modelling of a Fluidized Bed Gasifier; Effects of Drag Model and Bed HeightsCharacteristics of a Reciprocating Pump for Low-Cost Sustainable Water Hydraulic Technology DemonstratorTime Delay Measurement Compensation in Harmonic State EstimationRemote Terminal Unit Developed for Distribution Automation System (DAS) Using MPLAB SoftwareVariable Speed Vector Control for Induction Motor of Electric VehicleEffectiveness of the Adaptive PID Controller for Traction Motor in Hybrid Electric VehiclesOptimal Capacitor Allocation in Distribution System Using Particle Swarm OptimizationA Low Cost Wireless Data Acquisition System for Distribution Automation SystemConceptual Design and Performance Analysis of Parallel Drive-Train for Hybrid Electric MotorcycleComputer Simulation of New High Capacity and Low-Loss HVDC Transmission for Sustainable Energy SystemsElectric Vehicle Development and Prediction of Battery Consumption Based on a Journey ProfileEnergy Harvesting and Regeneration from the Vibration of Suspension SystemPower Distribution Network Reconfiguration by Using EPSO for Loss MinimizingReal-Time Monitoring System for Sustainable Domestic Electric Power ConsumptionEnergy Saving through Modeling of Integrated Distillation Column (Side-Stripper) in Natural Gas Liquid ProcessingExergy Analysis on a Split-Type Conditioner Using Ejector as an Expansion DeviceComparing Cooling Energy between Existing Air-Conditioning System and Proposed Design SystemEnergy Efficient Scheduling Algorithm for Soft Real Time System with High Deadline Meeting Rate on OverloadTheoretical Analysis on Energy Consumption for Industrial RobotsTransportation Algorithm for Optimizing Renewable Energy Resources Utilization at Rural AreasVariability in Embodied Energy and Carbon Intensities of Building Materials Using Hybrid LCA: Malaysian ExperienceThickness Optimization of Kapok Fibre Insulation below Roof Pitch of Residential Buildings in Hot-Humid Climate with Mathematical FormulationDemand Side Management Technique for Domestic Level by Using Fuzzy Logic ControllerEvaluation of Energy Efficiency for Residential New Construction (RNC) Single Storey Terrace HouseAutomated Detections of Carcinogenic Compounds in Estuaries: A Short ReviewOil and Gas Offshore Pipeline Leak Detection System: A Feasibility StudyAnalytical Hierarchy Process for Design Selection of Micro Hot-Marking ToolInvestigation of Compact Tree-Shaped Coplanar Waveguide (CPW) Antenna for RF Energy HarvestingAnalysis of Matching Circuit to Improve the Efficiency of RF to DC Conversion for Ambiet RF Energy HarvestingExperimental Study of Various Porosity of Fractal Flow Conditioner for Orifice Plate FlowmetersPerformance Evaluation of Adaptive Indoor Matched Rake Receiver Using Multiple-Combining TechniquesAlleviation Interference Scheme Analysis Using Flexible Cross Correlation (FCC) Code for SAC-OCDMA SystemsImproving OCDMA System via Combination of OFDM/OCDMA TechniquesImprove the Bit Error Rate Performance of Free Space Optical Communication due to Atmospheric Turbulence Effect through the Robust ModulationResin and Film of LDPE Extractable from Local and Imported Food Packages for US and China ComplianceZinc Accumulation in Leafy Vegetable Irrigated with Secondary Treated Wastewater under Soil and Soilless CultureThe Correlation Parameters for the Construction of Passive Grease Trap for Effective Waste ManagementSolid Waste Management and Treatment in MalaysiaPassenger Comfortability Studies of Electric Vehicle under ISO-2631 CriteriaLignin Modified Urea Fertilizer's Biodegradation and Nitrogen Release under Reduced Soil ConditionSynthesis and Adsorption Performance of Carbon Materials for the Removal of Iron (III) from Aqueous SolutionSynthesis and Characterizations of Metal Oxide-Sulfonic Acid Functionalized ZSM-5 for Photocatalytic Degradation and Adsorption of Dimethylarsenic AcidEffect of Silicon Oxide Size and Reducing Environment on the Photocatalytic Capability of Poly(Vinyl Alcohol)/Chitosan/Silicon Oxide BeadsCharacterization of Activated Carbon from Sugar Cane HuskBioremediation of Biodiesel/Diesel Blend (B50) in Soil Contamination by Using Pseudomonas putidaCalcium Carbonate Production through Direct Mineral Carbon Dioxide Sequestration
