Physical and Numerical Simulation of Materials Processing

Selected, peer reviewed papers from the 5th International Conference on Physical and Numerical Simulation of Materials Processing, October 23-27, 2007, held in Zhengzhou, China
Erscheinungsjahr 2008
ISBN: 978-0-87849-392-0
Verlag: Trans Tech Publications

Buch, Englisch, 1570 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3000 g

This specialist work comprises 249 peer-reviewed papers on the “Physical and Numerical Simulation of Materials Processing”.

Autoren/Hrsg.

Niu, Ji Tai

Liu, Zu Yan

Jin, Cheng

Zhou, Guang Tao

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
• Technische Wissenschaften Technik Allgemein Modellierung & Simulation
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
• Mathematik | Informatik EDV | Informatik Professionelle Anwendung Computersimulation & Modelle, 3-D Graphik

Inhaltsverzeichnis

Committees
Preface
Three-Dimensional Thermo-Mechanical Finite Element Simulation for Casting Ladle Structure under Thermal Loadings
Experimental Research of Elevated Temperature Creep and Stress Relaxation during Continuous Straightening
Derivation and Application for Time Step Model in Simulation of Solidification Process
The Computer Solidification Simulation of Oceangoing Freighter Rudder Horn
Microstructures of Rapidly Solidified Hypereutectic Al-Si Alloy with Low-Titanium Content
Numerical Simulation of Rheo-Diecasting Mould Filling Process of Semisolid Magnesium Alloys
Numerical Simulation of Induction Heating Process of Continuous Casting Slab
Application of Level Set Method to the Simulation of Liquid-Gas Two-Phase Flow during Mold Filling
Simulation of Gas-Solid Two-Phase Flow to Process of Filling the Foam Mould
Gate Location Optimization in Injection Molding Based on Empirical Search Method
Mold Filling Process Control of Molten Aluminum in Permanent Molds with a Web Gating System
Thermal Simulation on Mechanical Properties of Steel Q345 for Continuous Casting Slab
Simulation and Investigation on Physical Properties of Continuous Casting Slab AH36 at High Temperature
Numerical Study of Liquid Core Solidification in Influence of Soft Reduction Deformation on Steel Slab Continuous Casting Process
Numerical Study on Mold Filling Process of Casting
Thermal Analysis of Whirling Unit Attached to Thread Whirling Machine
Casting Process Simulation of the Ball Milling Machine End Cover with a Hug Diameter
Numerical Simulation of Die-Casting Mold Filling Process by Using Fractional Step Method
A Cellular Automata Model for Dendrite Structure Simulation
Numerical Simulation on the Dendritic Spacing and Microporosity in A356 Alloy Ingot
Coupled Numerical Simulation on Heat, Flow and Solution Transport in Double-Stream-Pouring Continuous Casting
A New Prediction Way to Shrinkage Cavity Formation for Ductile Iron Castings
Microstructure Simulation of Die Casting Magnesium Alloy
The Simulation of Thermal Field in Induction Melting with Cold-Crucible and Dual Frequencies
Control of Liquid Level in Tundish of Strip Caster with Automatic Pouring System
Numerical Simulation of Solidified Structure Formation of Al-Si Alloy Casting Using Cellular Automaton Method
Material Constants of Ferritic Spheroidal Cast Iron during Hot Deformation
Numerical Simulation and Experimental Method for Auto-Panel Forming Defects Analysis
Semi-Enclosed Cold Forging Process Analysis and Progressive Die Design of CPU Fin
Numerical Simulation and Structure Optimization of the Main-Control Reversing Valve of Electrical-Hydraulic Hammer
Intelligent Control Experiment Study for V-Shape Free Bending of Wide Sheet Metal
Forecast of Discharge Voltage for Electromagnetic Tube Forming Based on FEM Analysis
Investigation to the Damage Tolerance of Composite Cylinder for Vehicles by Numerical Simulation
Research on Closed Die Forging Process of Car Steering Knuckle
Study on Effect of Extrusion Velocity on Composites Liquid-Solid Extrusion Process Using 3D Thermo-Mechanical Simulation
Torque Strength and Influencing Factors Analysis for Assembled Camshaft by Knurling Joining
Study on Mechanical Behavior for Warm Extrusion of AZ61 Magnesium Alloy
A Research on Steel Synchronizer Gear Ring's Precision Forging
Researches on Rules of the Longitudinal Residual Stress Distribution in Straightening Deformation Zone of Heavy Rail with Multi-Rollers
The Application on Initial Design of Auto Panel Based on One-Step FEM
Research on Behavior of Slab Surface Defects in Forward Slip Zone during V-H Rolling Process
A Goal Oriented Numerical Simulation Approach for Computing Stress Intensity Factors in Bimaterials
Finite Element Analysis of Stress and Strain in Two-Wedge Cross Wedge Rolling Step-Shaft Part
Analysis of Hammering Deformation Processes by the Dynamic Explicit Finite Element Method
Study on Flow Stress Model of a Microalloyed High Strength Steel in CSP Hot Rolling
Thermal-Mechanical Analysis of Metal Forming Based on Meshfree Method
Finite Element Analysis of Slab Steel in the Process of Induction Heating
Research on Fast Calculation of Rigid Plasticity Finite Element Method in Hot Strip Rolling
The Finite Element Analysis of Serrated Chip Formation in High-Speed Cutting Auto Panel Dies
Hot Stamping Processing Experiments of Quenchable Boron Steel
Research on Cold Taper-Rolling Law of the Spiral Blade Based on Finite Element Method
Finite Element Analysis of Optimum Back Pressure during Equal Channel Angular Pressing
The Contrast Research of the Finite Element Simulation for Ordinary and Fine Blanking with Negative Clearance
Die Design of a Back Panel for a PDP TV Using 3-D Elasto-Plastic Finite Element Analysis
Metal Flow Behavior on the Non-Uniform Wall Thickness Three-Way Valve Extrusion
Hot Forging Process Design Optimization Based on Approximate Model and FEM Simulation
Macrokinetics Hierarchies of States at Dynamic Superplasticity
Qualitative Physical Modeling and Experimental Study on Forging Method with Horizontal V-Shaped Anvil
A Method of Bulge Test for Determining the Work Hardening Characteristics of Sheet Metals
Releasing Algorithm for Volumetric Locking in Metal Forming Process Simulation Based on Element-Free Galerkin Method
Key Technologies for 3D-FE Modeling of Radial-Axial Ring Rolling Process
Numerical Simulation and Response Optimizer Design of Strengthening Effects Induced by Laser Shock Peening
Improvement of Consumer Properties and Stability of the Technological Process of Hot Rod Stock Production
Spatial Structure Injection Molding Analysis of Suspended Bio-Carriers
Simulation of Hydroformed High Strength Steel Chassis Parts
Computer Simulation of Metal Forming Processes
A New Optimization Method of Constitutive Equation for Hot Working Based on Physical Simulation and Numerical Simulation
Process Optimization of Laser Micro-Bending Using iSIGHT
Mechanics Analysis and Numerical Simulation on the Precise Forming Process of Spline Cold Rolling
Simulation of Molding Flow of Sheet Molding Compound in Complicated Dies
Finite Element and Experimental Analysis of Three-Dimensional Flow State of Plastic Melt in Slit Die Section
Temperature Prediction of Seven-Pass Finishing Rolling of Hot Thin Strips by FEM
Research on the Intramode Canning Hot Forging Process for Mn18Cr18N Retaining Ring
Research of Favorable Conversion of Friction during Powder Compaction
Simulation of Three-Dimensional Stress Distribution in Compression Dies
Simulation of the FGH96 Superalloy Microstructural Changes under Different Deformation Conditions
Investigation into the Warm Extrusion for Micropart with Laser-Aided Heating Method
Strength Analysis of Elastic Bar Based on ANSYS Simulation
Investigation on the Key Technologies of Mechanical Expanding of Large Diameter LSAW Pipe
Shrinkage Optimization of Flat Receptacle Using the Finite Element Method
Numerical Simulation of Wire-Rod Hot Continuous Rolling Process with Multi-Field Coupling
Investigation of Relationship between Material Flow Direction and Local Stress Field in Plastic Deformation
Heat-Stress Fields Numerical Simulation of Aluminum Profile Extrusion by Porthole Die
A Mathmatical Approach for Modeling Real Hot Forming Process Using Physical Simulation Results
Elasto-Plastic Dynamic Explicit Analysis of Cold Ring Rolling Process
Numerical Simulation Analysis on Cold Closed-Die Forging of Differential Satellite Gear in Car
Fast Prediction of Springback at Product Design Stage for Sheet Metal Forming
3D Thermal Mechanical Coupled Elasto-Plastic Finite Element Analysis in the Whole Rolling Process of H-Beam
Modeling Stress Strain Curves for Nonlinear Analysis
Rheological Models as the Basic Element of Metal Forming Processes Simulation
Deforming Mechanisms of Two-Pass Drawing Process of an Aluminum Tube from Circular to Rectangle Section
Investigation of the Billet Deformation Process in the Dies with Elastic Elements Realizing a Cross and a Longitudinal Shear
Numerical Simulation on Pharmaceutical Powder Compaction
The Establishment of Mathematics Model of Velocity Field in Strip Cast-Rolling Deforment Area
Numerical Simulation on Laser Peen Forming of Sheet Metal
A 3D Rigid-Plastic FEM Simulation on Radius of Incremental In-Plane Bending of Strip Metal
Prediction of Rolling Force during Temper Rolling
The Innovative Production Developments in Sheet Hydroforming
Research on Simulating of Controlled Rolling and Controlled Cooling Process for Mo Micro-Alloy Steel
Application Research on Expert System of Incremental In-Plane Bending
Deformation Pattern of the Large Generator’s Retaining Rings during Hydraulic Bulging Strengthening
Density Functional Theory Applying in the Computation to the Properties of Copper Surface
Finite Element Simulation for Evolutions of Profiles during Hot Compression
Simulation of Internal Stress in Injection Molded Parts
A Study of the Microstructure and Grain Size at the Welding Heat Affected Zone of a Ferrite Stainless Steel
Study on Temperature Distribution of Plasma Surface Alloying Furnace
Reliability Calculation of Welded Pressure Pipe with Circumferential Crack Based on 3-D Elastic-Plastic SFEM
Numerical Simulation of Basal Parameters for Fatigue Evaluation of Electromotor Rotor Welded Structure
Numerical Simulation of Temperature Field and Stress Field of Electron Beam Brazing Stainless Steel Radiator
The Research of a Pulse Laser Powder Materials' Sintering Process
Numerical Simulation on Temperature Field of Electron Beam Welding of Magnesium Alloy and Study on Properties and Microstructure of Joint
Numerical Simulation of Residual Stress in the Glass-to-Metal Diffusion Seals
Investigation of the Influence of Shot Peening on Stress Corrosion Cracking of Stainless Steel Welded Joints
Numerical Simulation of Laser Surface Micro-Texturing
Analysis and Evaluation for Usability of the Low Hydrogen Type Structural Steel Covered Electrode
Investigation on M-A Constituent in Weld CGHAZ of High-Strength Microalloyed Steel
FE Simulation of Complex Contour Forming of Sheet Metals Based on Laser Bending
Numerical Analysis on Temperature Field of Axial Alternating Magnetic Field-Assisted Electric Field-Activated Sintering
Investigation on the Simulation System of GTAW Operation Based on Virtual Reality Technology
Numerical Simulation and Analysis of Flow Field in TIG Arc Brazed Filler Metal Droplet
Quality Measure and Control System for the Whole Process of Arc Welding
Research on One New Type of Rapid Prototyping Based on Laser-Induced Chemical Liquid Deposition
Simplified Heat Model of the Weaving Welding Processes
Grain Refinement Behavior of Pipeline Steel in Welding Heat Affected Zone
Numerical Simulation of Welding Residual Stress and Post-Weld Heat Treatment for Dissimilar Steel Welded Joint
The Electrical Contact Resistance in Resistance Welding Evaluated by Gleeble Testing Machine
Numerical Modeling of High Power MAG Welding on the Plate
Analysis of Arc Welded Thin-Walled Cylinders to Investigate the Effects of Welding Process Parameters on Residual Stresses
Optimization of Welding Process Parameters for Rotating Arc Welding Sensor Based on Genetic Algorithm
Numerical Simulation on Temperature Field in Laser Welding for Aluminum Alloy with Different Thickness
Evaluation of Corrosion Property for Repair Welding Zone of Exhaust Valve
Numerical Simulation of Pulsed Arc Welding by Melting Electrode
Numerical Simulation of Hydrostatic Extruding Cu/Al Bimetal Clad through Equal-Strain Contour Concave Die
A Study on Numerical Analysis and Residual Stress Evaluation of Welded Joint
Overview of Modeling Strength Evolution during Friction Stir Welding
Numerical Computation of a Linear Friction Welding Process
The Simulation of Residual Stress for Stud Welding and Establishment of Strength Estimating Model
The Application of Welding Heat Cycle Computer Software
NiCr Alloy Coating Deposited on the Surface of 35CrMo Steel by the Electrospark Process
Computer Simulation of Thermo-Mechanical Processes at Fusion Welding of Alloyed Steels
Gas Tungsten Arc Welding and Hybrid Laser-TIG Welding Temperature Field Analysis of AZ31B Magnesium Alloy
Study on Computer Emulation of PTFE’s Wearability Improvement by Al3+ Ion Implantation
Influence of Temperature on Field-Induced Reorientation Strain in Magnetic Shape Memory Alloy
Application and Research of Numerical Simulation for Rubber Like Material with MSC.Marc
Optimization Design for the Interface Modulus of Csf/Al Composite
A Study of the Environment–Friendly Chrome-Free Chemical Conversion Coating on 2024 Aluminium Alloy
Numerical Simulation of Interfacial Bonding Degradation of Composites under Two-Stage Loading
Study on the Freeze-to-Crack Test of Asphalt Modified by Waste-PE in Packing
Mullite Interlayer of C/Si-C-N Composites Fabricated by PIP
Numerical Simulation of Thermal Induced Crack Propagation in Laminated Composites
Modified Tartagli Method for Calculation of Jominy Hardenability Curve
Study on Deformation Induced Ferrite Transformation in Mild Steels with or without Niobium
Determination of the Kinetics for Dynamic and Static Recrystallization by Using the Flow Curves
Microstructures and Toughness in Simulated Coarse Grain Heat-Affected Zones of Copper-Bearing Steel
Structure Optimization in the Stacked Package of IC Microstructures
Influence of Delamination of Epoxy/Dielectric Interfaces on Pattern Shift and Passivation Cracking under Aeronautical Conditions
(225)A Martensite Transformation and Kurdjumow-Sachs Mechanism
Numerical Modeling of the Electrical Resistivity of Carbon Black Filled Rubber
Numerical Simulation of Thermal Stress Fields during Gas Quenching
Effects of Thermal Treatment on the Morphology and Properties of CSM/Poly(Urethane-Isocyanurate) Composites Formed by SRIM Process
High Temperature Mechanical Behavior of 16Mnq under Constant Constraint Conditions
Phase Formation and Structure of Mullite-Alumina-Zirconia and Spinel-Enstatite Ceramics Developed from Synthetic and Mineral Raw Materials
Mechanical and Processing Characterisation of Effective Behaviour of Wood-Plastic Composites by Analytical and Numerical Simulation
The In Situ Study on the Micro-Structural Characters of IF Steel at Early Stage of Recrystallization Using High-Energy X-Ray
Topology Optimization of Orthotropic Material Structure
Investigating the Mechanical Property and Rolling Contact Fatigue Life of Diamond-Like Carbon Films on Bearing Steel
Finite-Element Analysis of Thermal Stresses in Diamond Film Deposition on Mo Substrate with Ti Interlayer
Application of Physical Simulation for Developing New Steel Types
Dislocation Distribution Function of Two Fracture Dynamics Problems Concerning Aluminum Alloys
A New Optimization Algorithm for Inverse Analysis to Material Parameters
Nonlinear Bending of the FGM Circular Plates with Temperature-Dependent Properties
Influence of Ceramic Aggregate on the Microstructure of Filtration Materials
The Effect of Nonequilibrium Structure State on the Creep and Superplastic Behaviour of Materials
Research on the Accurate Control of Initial and Finishing Cooling Temperatures for X70 Pipeline Steels
Residual Stresses of Fiber-Reinforced Functionally Graded Composites
Research on Creep Constitutive Model of TC11 Titanium Alloy Based on RBFNN
Hot Ductility of Fe-18Cr-12Mn-0.55N High Nitrogen Austenitic Stainless Steel
Simulation of Intercritical Austenization of a C-Mn Cold Rolled Dual Phase Steel
Research on Heat Treatment Techniques and Structure Properties of CuNi2TiCrZr Alloy
Effect of Molybdenum on Hot Deformation and Processing Maps of Austenitic Stainless Steels
Physical Simulation of Dynamic Recrystallization Behavior of 7050 Aluminum Alloy
Study on Preparation of Ti Powder by Self-Propagating High-Temperature Synthesis (SHS) with Magnesiothermit Reductive Process
Effect of Zinc Content on the Ageing Behavior of Al-Zn-Mg-Cu-Li Alloys
Effects of Gas Multicomponent Thermochemical Treatment Process on Structure and Properties of Steel 20
Study on High Temperature Mechanical Properties of Bearing Steel GCr15
Predicting Modulus of Elasticity for Wood-Based Composites
Amorphous Compositions for Production of Thick Films
Achieving the Dual Phase Structure in Low Alloyed Steel with Slow Cooling Rate
Influence of High Shearing Stress-Induced Strengthen Effect on GF/HDPE Composites
Computer Simulation of Heat Treatment Process for 125MN Plunger
Simulation of the Processes of Aluminum Alloys Preforms and Semifinished Products Manufacture under Influence of Technological Heredity and Phase Transitions
Finite Element Simulation for Forging Process Using Euler’s Fixed Meshing Method
Research on the Mechanisms of Laser Forming for the Micro-Structural Element
Application of Time-Ageing Time and Time-Temperature-Stress Equivalence to Nonlinear Creep of Polymeric Materials
The Influence of Temperature on Cr-Ti Coating in Carbon Steel
A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method
A Study on Tribology Characteristics of SM53C by High Frequency Heat Treatment
The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 20MnV Steel
Comparison of Microstructural Aspects by Electron Microscopy Observed in Al-Mg Based Alloys Obtained by Conventional and P/M Processes After Thermomechanical Treatments
The Corrosion Behaviors of Heat-Treated SAE 8620 Steels
Displacement Field Simulation and Deformation Prediction of Longitudinal Straight Seam Welding of Thin-Wall Aluminium Alloys Cylinder
Simulation of Mold Filling and Solidification on Gravity Casting of Al-Si Alloy (A357)
A Study on Constitutive Model and Parameters of Rock Slope Stability
Analysis and Simulation of Sensor Structure Parameters and Filling Materials Characteristics for Electrical Capacitance Tomography System
Pad Effects on Slurry Flows in CMP System
Dynamic Characteristic Analysis of the Micropump Considering the Diaphragm Stiffness
Numerical Simulation of Gas-Solid Flow in a Precalciner of Cement Industry
Thermodynamic Analysis of Friction Pairs inside a High Temperature Flow Rate Control Valve for Scramjet Engines
Application of RFPA2D in Sublevel Caving Mining Extra-Thick Coal Seams
The Fabrication of 2-D Global Fiducial Grid with High Resolution for Spatial Phase Locked e-Beam Lithography
Analyses of the Influencing Factors of Rotating Impeller Degassing Process and Water Simulation Experiment
Modelling Fabric’s Optical Behaviors
Study on Medicinal Properties of Red 1%NaOH Extractives of Castanopsis Fissa Wood by GC/MS
The Effects of Substrate Temperature on the Residual Stress for EBPVD TBCs
Study on Temperature Distribution in Double Glow Discharge Zone
Stability Analysis of Diversion Tunnels in Jinping II Hydropower Station Project
Study on Method of the Multi Control Task and Synchronized Data Acquisition of the Themo-mechanical Simulator
Analysis and Experiments of Eddy Current Brakes with Moving Magnets
Flashover Condition Analysis on Passenger Carriage Fire by Using Swallowtail Catastrophe Theory
Numerical Simulation of Temperature Distribution in Conductive Asphalt Solar Collector due to Pavement Material Parameters
Study on Healthful Function of Superheated Water Extractives of Phyllostachys Heterocycla by GC/MS
Determination of Chemical Components of Red 1%NaOH Extractives of E. Urograndis Wood by GC-MS
An Abrasive Wear Model of Interpenetrating Composites
The Effect of Temperature and Content of Conductive Filler on the Conductivity of Conductive Rubber
Study of Electroplating Zn-Sn-Ni Alloy
The Influence of Surveying Method on Mechanical-Electrical Properties of Smart Mortar
Calculation on Temperature Rise of CMP Process: Roughness Effects Considered
Weight Calculation of Steel Pipe by Visual Basic Programme
Research on the Proper Selection of Soil Constitutive Relation in Modeling Underground Excavation
Research on Hydrogen Induced Cracking of 08Cr2AlMo Steel Based on the Empirical Electron Theory
A FEM Study on Chip Formation in Orthogonal Turning Nickel-Based Superalloy GH80A
Numerical Analysis of Electromagnetic Field of Solid Rotor Asynchronous Permanent Magnetic Coupling by Finite Element Method
Comparison between Plasma-MIG and MIG Procedures on 5A06 Aluminum Alloy
Numerical Simulation for Low Pressure Die Casting of Al-Alloy Motor Enclosure and Technology Improvement
Investigation of Forming Conditions on Microstructure Development and Mechanical Stability of Trip Steel
Analysis of Worm Cutting Characteristics in Whirling Process
Analysis on Section Effect of Heavy Plate by Finite Element Method during Controlled Cooling
Effects of Vanadium and Rare-Earth on Carbides and Properties of High Chromium Cast Iron
The Multi Physical Fields Modeling for 7B50 Aluminum Alloy Semi-Continuous Casting Process
Development and Application of Experimental Facilities for Steel Forming
The Multi-Scale FEM Simulation of Wire Fracture during Drawing of Perlitic Steel
Research and Simulation of Influence of Different Pressing Velocity on Powder Metallurgic Products Properties
Impact of Rolling Conditions on Propagation of a Potential Crack
Applications of Dyes in Material Science Research
Finite Element Analysis on Microstructure Evolution of Hot Ring Rolling Process
Finite Element Analysis of the Rolling Contact Fatigue Life of Railcar Wheels
Effect of Scanning Frequency on Temperature Distribution
Study on One Kind of Antenna Radomes Materials Numerical Algorithm Simulation Based on DBEM
Diffusion Interaction between Two Metals, One of Which is in Liquid State
The Study of Thermal Boundary Condition for CFRP Pressure Vessel with Metallic Liner during Manufacture Process
Numerical Simulation of Process of Cavity Filling and Solidifying in TiAl Alloy Investment Casting