Sonstiges, Englisch, Band Volume 881, 520 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 881, 520 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-0357-2115-7
Verlag: Trans Tech Publications
These results of scientific and engineering research could be useful for engineers, students and academics from fields of applied materials science.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Synthesis and Characterization of LaCr1-xSnxO3 Nanopowders (x = 0 and 0.1)Optical and Structural Properties of Lanthanum Chromite Synthesized by Microwave Assisted Self-Combustion MethodGamma-Alumina Synthesis from Ceramic Powders of Pseudoboehmite Obtained by the Sol-Gel ProcessEffect of Iron and Vanadium on the Phase Transition of Titanium Dioxide Obtained by Polymeric Precursor MethodMicrowave Irradiation Applied to Calcination and Sintering of Strontium Titanate CeramicsSynthesis and Characterization of CaMgSi2O6 Activated by Eu2+Synthesis and Characterization of Co/SBA-15 CatalystsSynthesis and Characterization of MgO/MCM-22 as Catalytic Support Using the Impregnation TechniqueEvaluation of Mechanochemical and Hydrothermal Transformations in a Wet-Milled Alumina by Transmission Electron Microscopy and Thermal AnalysisPorous Ceramics Obtained by Slip/Starch Casting Consolidation Method (SSCC)Organic Additives Used as Binders and Pore-Forming Elements of TIO2 CeramicsObtaining and Characterization of Porous Bodies Obtained by GelatinizationProcessing of Aqueous Tape Casting of Glass-Ceramic in the SiO2-Al2O3-MgO-Li2O System with ZrO2 and B2O3 AdditionDevitrification in SiO2-B2O3-Al2O3-La2O3-TiO2 Glass during the Infiltration of Ceramic CompositeCrystallization Kinetics of ?-Spodumene/Cordierite-Based Glass-CeramicsDevelopment of a-Al2O3 Ceramics for Bottom of Sintering Impeller FurnaceEffect of TiB2 on Pressureless Sintering and Hot Pressing of ZrB2Thermal Shock Resistance of Liquid Phase Sintered SiCThe Influence of Microstructure, Temperature and Sintering Level on Electric Properties of Electrical Insulators Obtained from Raw Materials of Rio Grande do Norte - BrazilEffect of CuO-TiO2 Eutectic on Thermal and Electrical Conductivities of CaCu3Ti4O12 CeramicsSynthesis and Characterization of Nickel Manganite Ceramics by Polymeric Precursors MethodEstimate of the Anisotropy Field of Strontium Ferrite from Powders Using the Stoner-Wohlfarth ModelHigh Technology Applications of Barium and Strontium Ferrite MagnetsInfluence of Sintering Conditions on Microstructural and Mechanical Properties of an Yttria Partially Stabilized ZirconiaPart II - Microstructural and Physical of Calcium Phosphate Biomaterials Obtained from Natural Raw MaterialsSynthesis and Characterization of Nanostructured Calcium Phosphates: Colloidal Suspension Rheological StudySynthesis and Characterization of a Nanostructured Matrix of Hydrated Calcium PhosphateSynthesis and Characterization of a Hydrated Calcium Phosphate Matrix and Biphasic Compositions with MgO and a-Al2O3Part I - Sinterability of Calcium Phosphate Biomaterials Obtained from Fossilized Calcareous Shells for Biomedical ApplicationsInfiltrated Spinel-Based Ceramic (MgAl2O4) for Dental ApplicationProperties of ZrO2(Y2O3) Used as Metal-Free Dental RestorationsProduction of Single-Phase Hydroxyapatite Porous Bodies from Gypsum/PolystyreneRheological Characterization of Aqueous ZrO2-Suspension for Additive ManufacturingManufacturing of Green Ceramic Balls: Machine and ProcessEvaluation of Filtration Properties of Clay Suspensions under Different Thermic ConditionsInfluence of Calcite in the Filtration Properties of Clay DispersionsOrganophilization Process and Characterization of Palygorskite Clay (Attapulgite)Measurement and Comparison of Pozzolanic Activity of Siliceous Materials Using Mechanical TestsStudy on the Influence of Water-Reducing Additives in Concretes for Civil ConstructionPozzolanicity Evaluation of Mineral Additions by Electrical Conductivity MeasurementsChemical Attacks in Geopolymeric Materials by Sulfuric Acid and Hydrochloric AcidDetermination of Solar Reflectance Index of Ceramic Coatings for Use in outside SurfacesEffect of Flat Glass Powder on the Slump Test and Microstructure of Portland Cement ConcreteInfluence of Particle Size and Soak Conditions of the Species Simarouba amara on Cement-Wood CompositesCorn Leaf Fibers Preparation and Characterization for Composite ObtentionAdhesive Selection for Lamellar Composites Alumina/Kevlar? for Impact AbsorptionMorphological Analysis of the Amorphous Carbon Embedded Nickel-Silica Composite Submitted at Gradual OxidationInfluence of Polyester Chain Type in the Morphology of Silica-Carbon Composites Obtained by the Polymeric Precursor MethodUse of Composite SiO2 (62-68)-MgO + CaO (29-39) in Ceramic Protection Mass Injection Machines in the Iron Notch and Liquid Slag Hole in Blast FurnacesBehavior of Fiberglass Polymer Composites under Ballistic Impact and Quasi-Static Punch Shear TestsDevelopment of WC-Fe3Al Composites by Spark Plasma Sintering ProcessAl2O3-YAG Biphasic Composite Phase Determination Using Rietveld Method MeasurementsStudy of Stability of Al2O3-Y2O3-ZrO2 Composite Ceramics in Crude Petroleum Environment for Inert Coating Applications in Petroleum IndustryMgAl2O4-ZrO2(Y2O3) Ceramic Composite: Sintering and CharacterizationStudy of the Substitution of Natural Fine Aggregates by Stone Dust in the Concrete of the Portland CementX-Ray Image Comparison of Wind Turbine Blade Waste and EPS Waste Used as Aggregates in Portland Cement ConcreteAnalysis of Technical Suitability of Using Wood Ash in Cement Based MaterialsConcrete Production of Hot Asphalt Using Recycled Aggregates CDWEvaluation of Incorporation of Dregs in Mortar Production in Replacement of Hydrated LimePermeability of Porous Ceramic Membranes Obtained from Waste of the Coal Extraction ProcessIncorporation of Paint Waste from Furniture Painting Booth into Covering MortarInternal Coating of Oil Refining Pipes with Alumina from the Recycling Process of Aluminum AnodizingGeopolymer Obtention Using Calcined Rice Husk AshEvaluation of Physical Parameters of a Clay with the Incorporation of Industrial Ash Waste by Means of Variance AnalysisUse of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain TileFeasibility Study of Zirconia Waste Recycling Obtained during the Machining of Single and Multiple Dental ProsthesisStudy of the Sintering Dental Ceramic Waste from ZrO2-Y2O3 SystemPhotocatalytic Degradation of Rhodamine B Dye through Zinc Oxide Obtained by High Energy MillingWO3:TiO2 Particle Characterization Obtained by High Energy Milling for Application in PhotocatalysisPhotodegradation of Phenol Red in a Compound of Type ZnO@Cr Core/ShellStudy of Influence of Replacement Waste Oil Well Drilling Fluid in the Standard Mass of a Ceramic Industry in Sa~o Gonc?alo do Amarante/RN, BrazilMicrostructural Evaluation of Clayey Ceramic Incorporated with Sludge from Paper ManufacturingViability of Sugarcane Bagasse Ash as Precursor Material to Solar Absorbers FilmsComparative Study of Geopolymeric Materials Using Different PrecursorsMorphological Characterization of Nickel-Silica Nanocomposite in Residual Carbon Obtained by Direct Polymeric RouteThe Use of Long Chain Diol for Obtaining Nickel Embedded in Silica-Carbon Matrix through the Polymeric Precursor MethodSynthesis of Nickel-Silica Nanocomposite Embedded in Amorphous Carbon through the Polymeric Precursor MethodGraphite Dispersions as a Basis for Development of High Thermal Conductivity FluidsThe Influence of a Nickel Precursor on the Synthesis of Nanosized NiO Material Using the Hydrothermal Method: Characterization and Electrocatalytic Oxidation of MethanolProduction and Characterization of Carbon Thin Films by the Magnetron Sputtering TechniqueEffect of Multi Walled Carbon Nanotubes Incorporated on Refractory CastablesStudy of Thermal Degradation of PEG/PVP Coating Adsorbed in Fe3O4 NanoparticlesStudy of Synthesis of Nanoparticulate Zinc Oxide Aiming at the Confection of Appropriated Targets for the Production of RadioisotopesX-Ray Peak Broadening and Raman Spectroscopy Studies of Ce0.08Fe0.02O2-d Nanoparticles Prepared by a Sol-Gel-Based Method
