Buch, Englisch, 520 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1010 g
Buch, Englisch, 520 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1010 g
ISBN: 978-3-0357-1115-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees, Sponsors
Chapter 1: Synthesis of Powder and Porous Materials
Synthesis and Characterization of LaCr1-xSnxO3 Nanopowders (x = 0 and 0.1)
Optical and Structural Properties of Lanthanum Chromite Synthesized by Microwave Assisted Self-Combustion Method
Gamma-Alumina Synthesis from Ceramic Powders of Pseudoboehmite Obtained by the Sol-Gel Process
Effect of Iron and Vanadium on the Phase Transition of Titanium Dioxide Obtained by Polymeric Precursor Method
Microwave Irradiation Applied to Calcination and Sintering of Strontium Titanate Ceramics
Synthesis and Characterization of CaMgSi2O6 Activated by Eu2+
Synthesis and Characterization of Co/SBA-15 Catalysts
Synthesis and Characterization of MgO/MCM-22 as Catalytic Support Using the Impregnation Technique
Evaluation of Mechanochemical and Hydrothermal Transformations in a Wet-Milled Alumina by Transmission Electron Microscopy and Thermal Analysis
Porous Ceramics Obtained by Slip/Starch Casting Consolidation Method (SSCC)
Organic Additives Used as Binders and Pore-Forming Elements of TIO2 Ceramics
Obtaining and Characterization of Porous Bodies Obtained by Gelatinization
Chapter 2: Glasses, Glass Ceramics and Correlated Materials
Processing of Aqueous Tape Casting of Glass-Ceramic in the SiO2-Al2O3-MgO-Li2O System with ZrO2 and B2O3 Addition
Devitrification in SiO2-B2O3-Al2O3-La2O3-TiO2 Glass during the Infiltration of Ceramic Composite
Crystallization Kinetics of ß-Spodumene/Cordierite-Based Glass-Ceramics
Chapter 3: Thermo-Mechanical Ceramics
Development of a-Al2O3 Ceramics for Bottom of Sintering Impeller Furnace
Effect of TiB2 on Pressureless Sintering and Hot Pressing of ZrB2
Thermal Shock Resistance of Liquid Phase Sintered SiC
Chapter 4: Ceramics for Application in Electrical and Electronics
The Influence of Microstructure, Temperature and Sintering Level on Electric Properties of Electrical Insulators Obtained from Raw Materials of Rio Grande do Norte - Brazil
Effect of CuO-TiO2 Eutectic on Thermal and Electrical Conductivities of CaCu3Ti4O12 Ceramics
Synthesis and Characterization of Nickel Manganite Ceramics by Polymeric Precursors Method
Estimate of the Anisotropy Field of Strontium Ferrite from Powders Using the Stoner-Wohlfarth Model
High Technology Applications of Barium and Strontium Ferrite Magnets
Chapter 5: Bioceramics
Influence of Sintering Conditions on Microstructural and Mechanical Properties of an Yttria Partially Stabilized Zirconia
Part II - Microstructural and Physical of Calcium Phosphate Biomaterials Obtained from Natural Raw Materials
Synthesis and Characterization of Nanostructured Calcium Phosphates: Colloidal Suspension Rheological Study
Synthesis and Characterization of a Nanostructured Matrix of Hydrated Calcium Phosphate
Synthesis and Characterization of a Hydrated Calcium Phosphate Matrix and Biphasic Compositions with MgO and a-Al2O3
Part I - Sinterability of Calcium Phosphate Biomaterials Obtained from Fossilized Calcareous Shells for Biomedical Applications
Infiltrated Spinel-Based Ceramic (MgAl2O4) for Dental Application
Properties of ZrO2(Y2O3) Used as Metal-Free Dental Restorations
Production of Single-Phase Hydroxyapatite Porous Bodies from Gypsum/Polystyrene
Chapter 6: Processing of Ceramics and Application of Ceramics Suspensions
Rheological Characterization of Aqueous ZrO2-Suspension for Additive Manufacturing
Manufacturing of Green Ceramic Balls: Machine and Process
Evaluation of Filtration Properties of Clay Suspensions under Different Thermic Conditions
Influence of Calcite in the Filtration Properties of Clay Dispersions
Organophilization Process and Characterization of Palygorskite Clay (Attapulgite)
Chapter 7: Building Materials
Measurement and Comparison of Pozzolanic Activity of Siliceous Materials Using Mechanical Tests
Study on the Influence of Water-Reducing Additives in Concretes for Civil Construction
Pozzolanicity Evaluation of Mineral Additions by Electrical Conductivity Measurements
Chemical Attacks in Geopolymeric Materials by Sulfuric Acid and Hydrochloric Acid
Determination of Solar Reflectance Index of Ceramic Coatings for Use in outside Surfaces
Chapter 8: Composites
Effect of Flat Glass Powder on the Slump Test and Microstructure of Portland Cement Concrete
Influence of Particle Size and Soak Conditions of the Species Simarouba amara on Cement-Wood Composites
Corn Leaf Fibers Preparation and Characterization for Composite Obtention
Adhesive Selection for Lamellar Composites Alumina/Kevlar® for Impact Absorption
Morphological Analysis of the Amorphous Carbon Embedded Nickel-Silica Composite Submitted at Gradual Oxidation
Influence of Polyester Chain Type in the Morphology of Silica-Carbon Composites Obtained by the Polymeric Precursor Method
Use of Composite SiO2 (62-68)-MgO + CaO (29-39) in Ceramic Protection Mass Injection Machines in the Iron Notch and Liquid Slag Hole in Blast Furnaces
Behavior of Fiberglass Polymer Composites under Ballistic Impact and Quasi-Static Punch Shear Tests
Development of WC-Fe3Al Composites by Spark Plasma Sintering Process
Al2O3-YAG Biphasic Composite Phase Determination Using Rietveld Method Measurements
Study of Stability of Al2O3-Y2O3-ZrO2 Composite Ceramics in Crude Petroleum Environment for Inert Coating Applications in Petroleum Industry
MgAl2O4-ZrO2(Y2O3) Ceramic Composite: Sintering and Characterization
Chapter 9: Recycling and Treatment of Waste
Study of the Substitution of Natural Fine Aggregates by Stone Dust in the Concrete of the Portland Cement
X-Ray Image Comparison of Wind Turbine Blade Waste and EPS Waste Used as Aggregates in Portland Cement Concrete
Analysis of Technical Suitability of Using Wood Ash in Cement Based Materials
Concrete Production of Hot Asphalt Using Recycled Aggregates CDW
Evaluation of Incorporation of Dregs in Mortar Production in Replacement of Hydrated Lime
Permeability of Porous Ceramic Membranes Obtained from Waste of the Coal Extraction Process
Incorporation of Paint Waste from Furniture Painting Booth into Covering Mortar
Internal Coating of Oil Refining Pipes with Alumina from the Recycling Process of Aluminum Anodizing
Geopolymer Obtention Using Calcined Rice Husk Ash
Evaluation of Physical Parameters of a Clay with the Incorporation of Industrial Ash Waste by Means of Variance Analysis
Use of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain Tile
Feasibility Study of Zirconia Waste Recycling Obtained during the Machining of Single and Multiple Dental Prosthesis
Study of the Sintering Dental Ceramic Waste from ZrO2-Y2O3 System
Photocatalytic Degradation of Rhodamine B Dye through Zinc Oxide Obtained by High Energy Milling
WO3:TiO2 Particle Characterization Obtained by High Energy Milling for Application in Photocatalysis
Photodegradation of Phenol Red in a Compound of Type ZnO@Cr Core/Shell
Study of Influence of Replacement Waste Oil Well Drilling Fluid in the Standard Mass of a Ceramic Industry in Sa~o Gonc¸alo do Amarante/RN, Brazil
Microstructural Evaluation of Clayey Ceramic Incorporated with Sludge from Paper Manufacturing
Viability of Sugarcane Bagasse Ash as Precursor Material to Solar Absorbers Films
Comparative Study of Geopolymeric Materials Using Different Precursors
Chapter 10: Nanotechnology
Morphological Characterization of Nickel-Silica Nanocomposite in Residual Carbon Obtained by Direct Polymeric Route
The Use of Long Chain Diol for Obtaining Nickel Embedded in Silica-Carbon Matrix through the Polymeric Precursor Method
Synthesis of Nickel-Silica Nanocomposite Embedded in Amorphous Carbon through the Polymeric Precursor Method
Graphite Dispersions as a Basis for Development of High Thermal Conductivity Fluids
The Influence of a Nickel Precursor on the Synthesis of Nanosized NiO Material Using the Hydrothermal Method: Characterization and Electrocatalytic Oxidation of Methanol
Production and Characterization of Carbon Thin Films by the Magnetron Sputtering Technique
Effect of Multi Walled Carbon Nanotubes Incorporated on Refractory Castables
Study of Thermal Degradation of PEG/PVP Coating Adsorbed in Fe3O4 Nanoparticles
Study of Synthesis of Nanoparticulate Zinc Oxide Aiming at the Confection of Appropriated Targets for the Production of Radioisotopes
X-Ray Peak Broadening and Raman Spectroscopy Studies of Ce0.08Fe0.02O2-d Nanoparticles Prepared by a Sol-Gel-Based Method