Sonstiges, Englisch, 1986 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1986 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-0357-1925-3
Verlag: Trans Tech Publications
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present volume contains selected papers from the third conference in the CICC series: CICC-3, which was held from the 9th to the 12th of May, 2004, in Shenzhen, China. It also contains 19 papers which were specially selected by Prof. Chang-Chun Ge and Prof. Jing-Feng Li from among the papers that were submitted to the First International Workshop on Layered and Graded Materials, which was organized as a special session within the framework of CICC-3.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Microwave Dielectric Properties of A-Site Modified Pb(Mg1/2W1/2)O3Microwave Dielectric Properties of Mn-Doped Ba4.5Sm9Ti18O54 CeramicsMicrostructure and Microwave Dielectric Properties of Ba5(Nb1-xTax)4O15 (x = 0 ~ 0.5) CeramicsEffects of Co2O3 on the Dielectric Properties of Mg2TiO4- Mg2SiO4 Microwave Ceramics(Ag1-xNax)(Nb1-yTay)O3 Dielectric Ceramic Prepared through Citrate Precursor MethodEffects of Ti4+ Substitution on Microstructure and Microwave Dielectric Properties of ZnNb2(1-x)TixO(6-3x) CeramicsInfluences of MnCO3 Doping on Processing Parameters and Dielectric Properties of ZnNb2O6 Microwave CeramicsEffects of CuO-V2O5-Bi2O3 Additions on the Microstructure and Microwave Dielectric Properties of 0.42ZnNb2O6-0.58TiO2 CeramicsMicrowave Dielectric Characteristics of BaO-Nd2O3-TiO2 Nano-Particles by Millimeter-Wave SinteringEffects of Mg2+ on Microstructure and Microwave Dielectric Properties of La2/3TiO3 CeramicsElectronic Structure Calculations of Ba(Mg1/3Nb2/3)O3 and its Dielectric Properties AnalysisDielectric Polarization of Ba2Ti9O20 Ceramics for Microwave ApplicationsPreparation and Structure of Ba2Ti9O20 and BaTi4O9 Ceramics Derived from Sol-Gel PowdersSintering and Dielectric Properties of Nano-BaTiO3 Powder Synthesized by High-Gravity Reactive PrecipitationModification of Ba6-3xSm8+2xTi18O54 (x=2/3)Microwave Dielectric Ceramics by Nd/Bi Co-Substitution on A-SiteTwo Methods for the Measurement of Complex Permittivity of Microwave Dielectric CeramicsProperties of Sr-Doped BaTiO3 Based X7R Ceramic MaterialsDevelopment of BaTiO3 Based X7R Wafers for Single-Layer CapacitorsEffects of Rare-Earth Oxides on Dielectric Properties of X7R Ceramics for Base Metal Internal Electrode CapacitorsEffect of Bi Content on the Dielectric Property of SBN Ceramics Prepared by Spark Plasma SinteringInfluence of ZrO2 on Dielectric Properties of Ba1-xSrxTiO3 Ceramics Dielectric and Ferroelectric Properties of Ba1-xSrxTiO3 Thin Films Prepared by Pulsed Laser DepositionInfluence of MgO Content on Microstructure and Dielectric Properties in (BaSr)TiO3 CeramicsEffect of CaTiO3 Content on the Dielectric Properties of Ba0.5Sr0.5TiO3Dielectric Properties of Zirconium Tin Titanate with Additives of ZnO, CuO, MnCO3 and Bi2O3Preparation and Dielectric Properties of Sm3+-Substituted SrBi8Ti7O27 Based Microwave CeramicsEffect of PbO-B2O3 Glass Additive on the Dielectric Properties of Ba0.80Sr0.20TiO3 /Pb0.88La0.12Ti0.97O3 Composite Thick FilmsElectric-Field Dependence of the Dielectric Behavior of BaxSr1-xTiO3 Ceramics at Different StatesEffect of Lead Excess on the Formation and Dielectric Properties of Silver Dispersed Lead Titanate FilmEffect of SrO/BaO Ratio on the Phase Structure of the BSTN Composite CeramicsDielectric Properties of TiO2-NiO Ceramics and Its Response MechanismDielectric Properties of TiO2-Al2O3 Composite CeramicsFabrication and Dielectric Properties of CNTs/SiO2 CompositesPreparation and Dielectric Properties of SiC-AlN Solid SolutionsSintering and Properties of CaO-Al2O3-B2O3-SiO2 System Glass CeramicsInfluence of Dy Doping on Microstructure of PLZT CeramicsDielectric Characteristics of BZT Nano-Powder Based CeramicsPreparation and Electrical Properties of Dense Bi4Ti3O12 Ceramics by Spark Plasma SinteringPreparation and Properties of Low-Temperature Sintered SrBi4Ti4O15/Ag CompositesEffects of Ag-Pd Powder on Ferroelectric and Mechanical Properties of PLZT CeramicsCo-Firing Behavior of Co2Z Hexagonal Ferrite/Ag Internal Electrode for MLCIsEffects of Electrical Characters on Electrical Fatigue Behavior in PLZT Ferroelectric CeramicsFabrication and Ferroelectric Properties of Ba-Doped Strontium Bismuth Titanate CeramicsFerroelectric Properties of Bismuth Titanate Ceramics by Sm3+/V5+ SubstitutionMorphology and Dielectric Properties of Lead Ziconate Titanate/Nano-ZnO CompositeMicrostructure and Characteristics of PbTiO3-PbZrO3-Pb(Mg1/3Nb2/3)O3- Pb(Zn1/3Nb2/3)O3 CeramicsTextured Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics by Templated Grain GrowthElectron Structure and Piezoelectric Characteristics of PMZN System PiezoceramicsMicrostructure and Characteristics of Pb(Ti,Zr)O3 Ceramics with Addition of Pb-Based Glass FritA Novel Micro-Actuator Made from PZTEffect of Sr Doping on Piezoelectric Properties of Pb(Mn1/3Nb2/3)O3-Pb(Zr,Ti)O3 CeramicsProcessing and Properties of PSZN-PZT Quaternary Piezoelectric CeramicsProperties of Na1/2Bi1/2TiO3 Ceramic Prepared by Sol-Gel MethodDielectric and Piezoelectric Properties of Praseodymium Modified Lead Zirconate Titanate CeramicsEffects of SiO2 Substitution on Piezoelectric and Mechanical Properties of PMS-PZT Ternary Piezoelectric CeramicsPreparation of PMZN Piezoceramic Using Sol-Autocombustion Synthesized PZT Powder as a BaseStructure and Piezoelectric Properties of PZN-PNN-PT CeramicsEffects of Lanthanum Modification on the Structure and Electrical Properties of PZN-PZT CeramicsInfluence of Film Thickness on Optical Properties of PLZT Thin Films Derived from MOD MethodEnhancement of Photovoltaic Effect of PLZT Ceramics by Compositional Optimization and Grain Size ControlSol-Gel Process and Properties of Textured Pb(Zr, Ti)O3 Films on Silicon WafersFabrication of BST Films by Electrophoretic Deposition from Nano-Scaled (Ba,Sr)TiO3 Synthesized by Different MethodsNew Lead-Free Ferroelectric Materials for High-Temperature Applications: Nb-Doped Bi3.5Nd0.5Ti3 O12Dielectric and Piezoelectric Properties of Na0.42K0.08Bi0.5 TiO3 and Na0.45K0.05Bi0.5TiO3 CeramicsElectrical Properties of the Mixed Bismuth Layer-Structured Bi7Ti4NbO21 CeramicsEffects of Donor Doping on Microstructure and Electrical Properties of Bismuth Layer-Structured Bi4Ti3O12 CeramicsThe Influence and Mechanism of the Electrical Conductivity of (Ca,Sr)Bi4Ti4O15 Piezoelectric Ceramics by Doping of CeO2Experimental Study on Damping Characteristics of Piezoceramic Materials Shunted by Passive Electrical CircuitsEffect of Gd2O3 on the Electrical Properties of (Co, Nb)-Doped SnO2 VaristorsGrain Size Effects of SnO2 Varistor Induced by Doping PrAntistatic Ceramic Tiles Modified by Sb-Doped SnO2Preparation and Photoluminescence Properties of Quantum Size Zinc Oxide ColloidsVoltage Response of ZnO Varistors to 8/20 ?s Surge CurrentNonlinear Electrical Properties of (Sc, Ta) Doped TiO2 Varistor CeramicsAg Nanoparticle Enhanced Photocatalytic Activity of Rutile TiO2 Films Prepared by Electrostatic Self-Assembly MethodThe Role of Niobium in (Ca, Si, Ce, Nb)-Doped TiO2 VaristorsEffect of La2O3 and CeO2 on Nb2O5 Doped TiO2 Ceramic VaristorsStudy on the Gas Sensitivity of a CeO2 Based Ceramic Sensing Element: Structure and CharacteristicPreparation and CO2 Gas Sensitive Properties of CuO-SrTiO3-Based Semiconductor Thin FilmsOxygen Sensitivity of SrFeO3-d Thin Films Prepared by Sol-Gel MethodStudy on Gas Sensing Properties of WO3 Thin FilmsA Potentiometric SO2 Gas Sensor with Solid Reference ElectrodeEffect of Iron Oxide on the Structure, Electrical and Magnetic Properties of (70% mole V2O5- (15-x)% mole P2O5-15% mole B2O3) Semi Conducting Glass SystemPreparation of Humidity Control Ceramics from Selectively Leached KaolinEffects of Glass-Additives on the Properties of Ni/Ceramic PTC CompositesPreparation of Ni/BaTiO3 Composites and PTC EffectStudy of Graphite/Bakelite/BaTiO3-Based PTC Ceramics CompositeEffect of BaCO3 and Pb3O4 on Properties of BaTiO3-Based PTCR CeramicsNi/Graphite/BaTiO3 PTCR CompositesElectrical Properties of BaTiO3 Doped with Lanthana and NiobiaEffect of Li+ and Mn2+ Doping on the Electrical Properties of SrTiO3-Based Varistor Ceramics(Ba,Sr,Pb) TiO3-BaPbO3 System Compound PTC CeramicImpedance Analysis Study on the Sensing Process of BaTiO3 Based PTC Ceramics in CO GasSpin and Valence States of Manganese Ions in Mn-Doped BaTiO3 Ceramics by Electron Paramagnetic ResonancePreparation and Properties of Titanium Oxide Photocatalyst with Visible Light ActivityMicrostructure and Electrical Properties of CeO2-Doped WO3 Ceramics Prepared by NanopowdersThermoelectric Performances of ZrNiSn/C60 CompositePreparation and Electrical Properties of Ternary Compound (PbTe)1-x(SnTe)x with NanocrystallinesEffect of TeI4 Content on Thermoelectric Properties of N-Type Bi2(Te,Se)3 Materials Prepared by Spark Plasma SinteringBi2Te3 and Bi2Te3/Nano-SiC Prepared by Mechanical Alloying and Spark Plasma SinteringStudy on Si Dependence of RB-SiC Thermoelectric PropertiesSynthesis and Electrical Transport Properties of TiCo1-xPdxSb Half-Heusler CompoundsThermoelectric Properties on SixGe1-x Containing FulleriteAdvanced Hybrid Ion Conducting Ceramic Composites and Applications in New Fuel Cell GenerationCeramic Technologies for Anode-Supported Solid Oxide Fuel CellsSulphate-Ceria Composite Ceramics for Energy Environmental Co-Generation TechnologyStudy of YSZ Amperometric Oxygen Sensor with a Dense Barrier LayerYSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ CermetLow Cost Fabrication and Performance of YSZ Electrolyte Thin-SubstrateSynthesis and Charge-Discharge Characteristics of Polycrystalline LiNi1-xCoxO2 (0 = x = 0.5) as a Cathode Material for Lithium Rechargeable BatteriesEffect of Iron Oxide on the Structure, Electrical and Magnetic Properties of (SiO2-B2O3-Li2O) Ionic Conducting Glass SystemCharacterization of LiFePO4 Synthesized by Sol-Gel ProcessingPreparation, Dielectric and Magnetic Properties of Barium-Ferrite-Containing Microcrystalline Glass Ceramic by Citrate Sol-Gel ProcessWeak Ferromagnetism and Magnetoresistance in Sm1/3 Sr2/3 FeO2.95The Effect of 'Hydrogenation ? Recalcination' Cycling on the Magnetic Properties of Strontium HexaferriteThe Powder and Bulk Magnetic Properties of Strontium Hexaferrite Substituted by La and NdThe Control of the Reactions of Strontium Hexaferrite Formation by the Molar Ratio of PrecursorsChemical Solution Deposition Growth of La0.7Ca0.3MnO3 Films and their Electric Pulse Induced Resistance Change EffectPreparation and Magnetic Properties of Y-Type Ferroxplana by Sol-Gel MethodPreparation and Magnetic Properties of Low Temperature Sintering Bi-Substituted Yttrium Iron GarnetCoating Nano-TiO2 on Optical Fiber with Al(H2PO4)3 AdhesiveMechanism of the Acicular Nanosize Mg,Al-Hydrotalcite Grain Growth under Hydrothermal ConditionsImproved Artificial BP Neural Networks and Genetic Algorithm Used to Predict the Purity of the Artificial Synthetic HydrotalciteSynthesis and Characterization of Monodispersive In2O3 ParticlesThe Application of Porous Anodic Aluminum Oxide Membrane in LuminescenceSurface Modification of Long Afterglow Sr4Al14O25: Dy,Eu Phosphor by Silica CoatingPreparation and Luminescence of Y2O3:Eu3+ NanopowderPreparation and Upconversion Luminescence of YAG: Er3+ PowdersSynthesis and Luminescence Properties of Yb3+/Ho3+ Co-Doped Lu2O3 Nanocrystalline PowdersPreparation and Characterization of a New Phosphor Lu2O3:Eu3+Multilayer ZrO2 Precursor Coated Polystyrene ParticlesDevelopment of 3D Ceramic Photonic Bandgap StructuresMicromorphologies and Defects in CVD ZnS and ZnSePhotoluminescence Properties of Zn2SiO4:Mn 2+ Inverse Opals Properties and Microstructure of Optically Transparent Polycrystalline SpinelMgAl2O4 Transparent Nano-Ceramics Prepared by Sintering under Ultrahigh Pressure New Style Thin Film Cathode Materials of Rare Earth Oxide Sintered by Spark Plasma Sintering (SPS)Texture Development of Dip-Coated Bi-2223 Thick Films on Ag SubstratePreparation of Ni-Co Spinel Oxide by Alloy Oxidation MethodThe Stability of Porous Alumina Template in Electrolyte and the Formation of Amorphous Alumina NanowiresPreparation and Characterization of Ordered Macroporous ZnO Films for Photonic ApplicationThe Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication of Silver NanowiresFabrication and Spectroscopic Investigation of La2Hf2O7-Based PhosphorsNovel Process for Synthesizing Nano-Ceramics Powder: Mechanical & Thermal Activation ProcessingPreparation of MgAl2O4 Nanopowder by Homogeneous Precipitation MethodStudy of the Technology of Chemical Copper Plating on Al-CuO Agglomerated PowdersNanostructured Surface Coating Layer of Calcium Carbonate Composite ParticlesPreparation and Characterization of Anisotropic Ammonium Titanium Phosphate Crystals via Hydrothermal RouteBiomimetic Synthesis of CaCO3 Particles with Specific Size and MorphologyStudy on the Synthetic Process of Calcium BorateSynthesis of BiFeO3-PbTiO3 Powders by Sol-Gel Auto-Combustion ProcessProcess for Non-Agglomerated Nanometer-Sized Barium Titanate Powders by Sol-Gel Auto-Igniting SynthesisPreparation and Characterization of BaTiO3 Powders by Sol-Gel and BaTiO3 Ferroelectric Films by Electrophoretic Deposition TechniquePreparation of PLZT Powders from Oxides via High-Energy Ball Milling ProcessSynthesis of Perovskite Pb(Zr0.52Ti0.48)O3 (PZT) Powders by a Modified Coprecipitation MethodPreparation of Nanocrystalline Ba3(Ca1.18Nb1.82)O9-d Powder with Sol-Gel Auto-Ignition Synthesis ProcessLow-Temperature Synthesis of PMnN-PZT Powders by Hybrid Method of Sol-Gel and Ultrasonic AtomizationCharacteristics of Sr2CeO4 Powder Phosphor Prepared by Combustion RouteCombustion Synthesis of Nanosized Y2Hf2O7 and Lu2Hf2O7 PowdersPhotocatalytic Properties of the Transition Metal Doped TiO2 Powder Prepared by Sol-Gel ProcessConverting Industrial TiO2 into Titanate Nanotubes by Simple Sonochemical-Hydrothermal ProcessingSynthesis of Nanometer Cobalt Oxide (Co3O4) Powders by Solid-State Reaction under Microwave IrradiationPreparation and Characterization of Semi-Conducting (Ba,Sr)TiO3 Powders by a Wet Chemical RouteSynthesis and Characterization of BaCe0.8Y0.2O2.9 Nanopowder by Sol-Gel Auto-Ignited MethodLiCoO2 Cathode Material Coated with Nano-Crystallized ZnO by Sol-Gel MethodSurface Treatment of the Lithium Boron Oxide Coated LiMn2O4 Cathode Material in Li-Ion BatterySynthesis and Characterization of LiNixCoyMn1-x-yO2 as a Cathode Material for Lithium Ion BatteriesSynthesis of (1-x) Ca0.4Sm0.4TiO3 ? xLi0.5Nd0.5TiO3 Ceramic Powders via Citric Acid PrecursorSynthesis of Well-Crystallized Manganese Oxide from Precipitation: Effect of Introducing Carbonate AnionsThe Microstructural Evolution of Mn3O4 Hausmannite during AutoxidationThermal Explosive Deforming Synthesis of SnO2 Nano-FiberPreparation and Utilization of Fine Expanded PerliteSynthesis and Evaluation of Antibacterial Titanate NanotubesHydrothermal Synthesis of Free-Standing Co3O4 NanocubesLow-Temperature Synthesis of Mono-Phase Ultrafine Yttrium Aluminum Garnet by Sol-Gel Combustion ProcessNew Processing of Textured Ceramics by Colloidal Processing Under High Magnetic FieldThe Factors Affecting Colloidal Processing of 8YSCZ CeramicsSynthesis of Poly (Acrylic Acid-Co-Itaconic Acid) and its Dispersing Effect for Barium Titanate Aqueous SuspensionTechnology and Equipment on Collide Injection Moulding of CeramicsStorage Stability of Ceramic Slurries for GelcastingGelcasting of BaO-Nd2O3-TiO2 Microwave CeramicsStudy of LSGM Slurry for Gel-Tape-CastingA Study of Slurries in Aqueous Tape Casting ProcessingFabricating Metal Patterned Ceramic Substance by Tape-CastingSolid Oxide Fuel Cell PEN Structures Fabricated by Tape Casting and Co-Firing TechnologiesViscoelastic Properties of Pb(ZrTi)O3-Based Slurry for Tape CastingLow Temperature Synthesis of Strontium Barium Niobate by Spark Plasma SinteringStudy on Spark Plasma Sintering of NiAl2O4-Metal Inert AnodesBaO-Nd2O3-TiO2 Nano-Ceramics Prepared by SPS TechnologyCo-Sintering of SDC / NiO-SDC Bi-Layers Prepared by Tape CastingShape Forming and Microwave Sintering of Thin Wall Tubular Lithium AluminateSynthesis and Densification of Nanometer K0.6Sr0.7Zr4P6O24 PowderEffects of Substrates on the Composition and Microstructure of TiO2 Thin Films Prepared by the LPD MethodThe Physical and Antibacterial Properties of Argentine-Doped TiO2 Film on Stainless Steel SubstratePreparation of Li+-Doped TiO2 Films by Sol-Gel ProcessPreparation of TiO2 Thin Films Using Inorganic Peroxo Titanic Complex and Autoclaved Sols as PrecursorsTiO2 Coating on Optical Fiber with Different Slurry StatesStudy on the Macro-Residual Stress of 304 Stainless Steel Coated with TiO2-SiO2 Thin Films by Sol-Gel ProcessStudy on Nano Film of TiO2 and ZnFe2O4 Composite Prepared by Dip Coating MethodPreparation of (111)-Oriented Pt Electrode Films with Quasi-Monocrystal Properties on MgO/TiN Buffered Si(100) by PLDPreparation of TiO2 Coating on the Glass and Hydrophilicity under Sunlight IrradiationThe Properties of Antimony-Doped Tin Oxide Thin Films by the Sol-Gel ApproachOn the Microstructure and Electrical Properties of Undoped and Antimony- Doped Tin Oxide Thin Film Deposited by Sol-Gel ProcessGrowth and Characterizations of Relaxor-Based Pb(Mg1/3Nb2/3)O3-PbTiO3 Thin Films by Sol-Gel MethodSynthesis and Microstructure of Barium Bismuth Titanate Thin Films Using a Sol-Gel TechniquePreparation and Electrical Properties of (100) Preferred (Ba,Sr)TiO3 Bilayer Thin Films Derived from Pulse Laser Deposition MethodPreparation of SrBi2Ta2O9 Ferroelectric Thin Films by Liquid Source Misted Chemical Vapor Deposition Method Using Inorganic Salt SolutionEvaluation of Texture in Pb(Zr0.52Ti0.48)O3 Films Prepared by Sol-Gel RouteEffects of Seeding on Large Crystal Growth of NaX Zeolite by Continuous CrystallisationEffect of Process Conditions on Stability of Ni-ZrO2 Composite Electroplating BathStudy on Alkyd-Based Electrically Conductive CoatingsImpact of Heat Treatment on the Electrical Properties of LaNiO3 Conductive Thin FilmsPreparation and Properties of CuInS2 Thin-Film by Successive Ionic Layer Adsorption and Reaction (SILAR) MethodPore Size Determination of Supported Organic-Inorganic Hybrid Membranes by Modified Gas Permeation MethodJoining between Ceramics and Metal in Composite Pipes Fabricated by the SHS Metallurgical ProcessCoating and Intergrowth of NaX Molecular Sieve Films on Porous Ceramic Paper for MembranesPreparation of Y-Doped Barium Cerate and Strontium Cerate MembranesStudy of Novel Self-Humidifying PEMFC with Nano-TiO2-Based MembranePreparation of Color Pearlescent Pigment Using Rare-Earth Oxide and Titanium Oxide to Coat MicaFormation and Oxidation Resistance of NbSi2 Coatings on Niobium by Pack CementationPretreatment of the TaSiN Substrate Surface for Copper-MOCVDElectromechanical Coupling Characteristics of SMA Wires under the Constraints of Stress and StrainAnderson-Stuart Model to Analyze AC and DC Conductivity of Lithium Zinc-Silicate Glass / Glass-CeramicsThe Influence of Bi3+ on the Sintering of Cordierite Glass CeramicLa2O3/Al2O3/B2O3 Based Glass-Ceramics for LTCC ApplicationProcessing and Characterization of La2O3-SiO2-B2O3 (LSB) Based Glass-Ceramics for LTCC ApplicationDependence of Dielectric Behaviour of Magnesium Aluminum Silicate Glass-Ceramics on Alumina ContentEffect of ZnO on Thermo Physical and Structural Properties of Lithium Zinc Silicate Glass-CeramicsInfrared-to-Visible Upconversion Emissions in Er3+ Doped TeO2-Based Oxyhalide GlassesEffect of Alkaline-Earth Metal Composition on Spectroscopic Properties of Er3+ in Fluorophosphate GlassesDesign of Multiphase MaterialsAnelasticity and Strength in Zirconia CeramicsThe Study on Degradation of Y2O3-CeO2-Partially Stabilized ZrO2 Adding Al2O3 Particles at Low TemperatureStudy on Preparation of Spherical Zirconia Powder in Microemulsion System and its Surface CharacteristicsPreparation of Zirconia Nanopowders in Ultrasonic Field by the Sol-Gel MethodPreparation of Refractory Nozzle by Gelcasting of Zirconia Suspensions with Coarse ParticlesPlastic Forming of Zirconia from Coagulated SuspensionsFabrication of Porous Zirconia Using Filter Paper TemplateProperties of ZrO2/Glass-Ceramics CompositeEffect of Dopants on the Corrosion Behaviour of Zirconia by Steel at High TemperatureThe Effect of Zirconia Sol-Gel Coatings on Mild Steel Oxidation ResistanceIndentation Creep in Zirconia Ceramics under Variable LoadsEffects of Zircon Additive on the Properties of 95-Alumina CeramicStrength of Liquid-Phase-Sintering Cordierite CeramicsAlumina Whiskers Formation during Self-Propagation High-Temperature SynthesisStudy on Stability of Nano-Al2O3 Aqueous SuspensionColloidal In-Situ Consolidation Forming of Al2O3 Ceramics Using Modified StarchSurface Modification of Al2O3 Fine Powders and Application in Epoxy ResinDispersion and Rheological Properties of Alumina Freeze Casting Slurries Containing Nanoparticle/Whisker SiCRheological Behaviors of Alumina Aqueous SuspensionsEffects of Solid Volume Fraction on the Gelcasting of Alumina SuspensionsModification of Al2O3 Microfiltration Membrane by Nano-ZnO CoatingMechanical and Wear Properties of Al2O3-15wt%ZrO2 CompositesFabrication of Nano-Micron Al2O3-ZrO2 Ceramic Eutectic Composites from the Melts by the SHS Metallurgical ProcessMicrostructure and Mechanical Properties of Al2O3/ZrO2 Composites Prepared by GelcastingEffects of PLS on Green State Joining ZrO2/Al2O3 CeramicsFreeze Casting of Aqueous Al2O3/Y-TZP SlurriesEffect of Microstructure on the Wear Resistance of Alumina Dispersed Y2O3-ZrO2 CeramicsCordierite-CeO2 Composite Ceramic: A Novel Catalytic Support Material for Purification of Vehicle ExhaustsMachinability Evaluation of Ce-ZrO2/CePO4 Ceramics with Digraph MethodWear of Twist Drills in ZrO2/CePO4 Composite MachiningCharacteristics of Machinable LaPO4/Al2O3 CompositesPreparation of CIM Feedstock of Al2O3-SiC NanocompositePressureless Sintering the Al2O3/SiC Nanocomposites in Deoxidized AtmospherePreparation of Al2O3-TiC Composite Powder by SHS ProcessSynthesis and Properties of Al2O3 Nanocomposite Ceramics Toughened by Nano Metallic ParticlesThe Study of Self-Propagating High-Temperature Synthesis of TiC-Al2O3/Fe Composites from Natural IlmenitePreparation of Nano Ni/Al2O3 Composite PowdersAl2O3 Multiphase Ceramics Coatings Sprayed by SHS-RFS Based on the Cladding PowdersStudy of Graphite in Al2O3 Ceramic with Copper MatrixWear Resistant of Al2O3/Heat-Resistant Steel at High TemperatureWear of the Al2O3-Based Multi-Ceramic Coatings Produced by SHS Flame SprayingInfluence of Loading Conditions on Cyclic Compressive Fatigue Behavior of an Al2O3 Matrix CompositeManufacture and Properties of AlON-TiN Particulate CompositesStudy of the AlON-VN Composite CeramicIn Situ Reaction Synthesis of Porous Silica-Matrix CeramicsPolycrystalline Silicon Thin Films on SiC Substrates for Solar CellsFabrication of Silica Colloidal Crystal Multilayer with Controlled Thicknesses by Vertical DepositionPreparation and Formation Mechanisms of Monodispersed Mesoporous SiO2 Microspheres by the PICA MethodMullite Composite Phase Nanocrystalline from High-Silica Kaolin under Normal Pressure and Temperature: An Experimental StudySolar Cells from Thin Silicon Layers on AlNPreparation of High Capacity Thin-Wall Rutile Tube for Ozone Generator by Colloidal Injection Moulding of CeramicsSynthesis of MgO Nanowires Combined with C NanotubesGrowth and Characterization of High Quality MgO Thin Films by Ultrasonic Spray PyrolysisA Predicting Method for Thermal Conductivity of Functional Carbide Crystals and Ceramic MaterialsNegative Thermal Expansion up to 1000?C of ZrTiO4-Al2TiO5 Ceramics for High-Temperature ApplicationsImproving the Strength of Al2TiO5 by Adding SpodumeneEffect of MgTi2O5 Addition on Thermal Shock Resistance of Al2TiO5Development of SHS-Si3N4 in LSCPMInvestigation on the Modification Methods to Ceramic Cutting ToolsHigh-Performance Ceramic Coatings Sprayed via Novel Supersonic Plasma Spraying SystemStructure of the Coatings onto Ceramic Cutting Tools Deposited by Pulsed High Energy Density PlasmaBending Strength of Ceramics Implanted by Titanium, Zirconium and Chromium Ions with MEVVA SourceHigh Strength and High Toughness Anisotropic Silicon Nitrides Fabricated by Forging TechniqueFabrication and Properties of the Tape-Cast Si3N4 with Rod-Like Si3N4 Seed AdditionPreparation and Characterization of Rod-Like ?-Si3N4 SeedsProduction of Si3N4 Whiskers in Solid Mixtures through Vapor-Solid Mechanism Using 2MgO 2Al2O3 5SiO2 as Sintering AdditivesEffects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si3N4 CeramicsEffects of Technical Parameters on the Phase Composition and Microstructure of Yb a-SiAlON Prepared by Combustion SynthesisCombustion Synthesis of ?-SiAlON WhiskersPreparation of ?-SiAlON Powder at Low TemperatureSuperplastic Forming of Silicon Nitride at Low TemperatureEffect of Microstructure on Sliding Wear of Ca a-SiAlON CeramicsStudy on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride CeramicsEffect of Cation Extraction on the Oxidation Resistance of Si3N4Polycarbosilane Conversion Bonded Porous SiC CeramicsMicrostructure and Properties of Reaction-Formed Silicon CarbideSpheroid Growth during Sintering of Copper Coated Silicon Carbide Particles in the Fabrication of NanocompositeOn the Theoretical Model for Radar Absorbing Property of SiCInvestigation on Superposition Rule and Influence of Multi-Thermal-Source Temperature Field on SiC SynthesizingPreparation of Oriented Porous Silicon Carbide Bodies by Freeze-Casting ProcessGelcasting of Aqueous Silicon Carbide / Carbon Black SlurryFormation Mechanism of Interior Microflaws in the Preparation of Polymer-Derived Silicon Carbide FibersFabrication and Characterization of Porous Mullite Coating on Porous Silicon Carbide SupportCharacterization of Fiber-Reinforced SiC Composites by Precursor-Pyrolysis and Hot-PressingSiC Coatings Deposited by RF Magnetron SputteringUltra-Fine Treatment of SiC Powder and Its Effect on Microstructure and Properties of SiC CeramicErosive Wear Behavior of Reaction Sintered Si3N4-SiCp Composite Ceramic in Liquid-Solid FlowFriction and Wear Characteristics of SiC and Si3N4 Ceramics Against ZrO2 Ceramic under Dry FrictionStudy on Erosion Resistance of Structural CeramicsUnlubricated Sliding Wear of TiN Particle Reinforced Si3N4 Matrix Composites Against AISI-52100 Steel BallErosion Wear Characteristics of Si3N4 Fabricated from Low-Cost PowdersOxidation Behaviors of MgAlON/Si3N4 Composite at High TemperatureSynthesis of Ti3SiC2 Bulk Materials with B2O3 AdditiveA Soft Ceramic Ti3SiC2 with Microscale Plasticity at Room TemperatureFrictional Layer and Its Antifriction Effect in High-Purity Ti3SiC2 and TiC-Contained Ti3SiC2Sliding Friction Behavior of Bulk Ti3SiC2 under Difference Normal PressuresTribo-Chemical Reaction in Bulk Ti3SiC2 under Sliding FrictionFabrication and Mechanical Properties of HAp/Ti3SiC2 (60 vol.%) Composite by Sparkle Plasma SinteringFabrication and Properties of Ti3AlC2-Based Ceramics by Two-Step MethodSynthesis of High Purity Ti3AlC2 Bulk Material by Hot-PressingBending Creep and Stress Relaxation of Ti3AlC2 at High TemperatureSynthetic of Zr2Al3C5 MaterialReaction Synthesized Boron Nitride-Containing Composites (BNCC)Sintering of Vitrified Bond CBN Grinding ToolStudy on the Performance of CBN Abrasives with Ti CoatingsMorphology and Reaction Mechanism of AlN Fibers Synthesized by Carbothermal ReductionThermodynamics and Kinetic Considerations behind the Growth of AlN Whiskers Synthesized by Carbothermal ReductionInfluence of Powder Characteristics on Sintering of AlN CeramicsEffect of Grain Growth Inhibitor on the Microstructure and Mechanical Properties of Ti(C,N)-Based CermetStudy of Ti(C,N)-Based Cermets Fabricated by Pressureless-HIP SinteringCombustion Synthesis of Ti(C,N) PowderFabrication of TiC-Ti Porous Materials by Combustion SynthesisCombustion Synthesis of TiNx C1-x Powders with Ultra Fine Particle Size by Using Titanium Oxide as DilutionCombustion Synthesis and Two-Time Densification of TiB2-Cu CompositesEffect of Pressure on TiB2-Cu Composite via In-Situ Reaction SynthesisLarge-Scale (Ti,Cr)B2-Cu Composite by Combustion SynthesisElectroless Plating of Ni-P-CNTs Composite CoatingThe Structure and Hardness of rf-Reactive Sputtered Ti-Zr-N FilmsTribological Behaviour of Combined Coatings Deposited on AluminiumEffect of Oxidation on the Wear Behavior of a ZrN CoatingFabrication of Vanadium Nitride by Carbothermal Nitridation ReactionThe Mechanism of the Formation of MoSi2 by Self-Propagating High-Temperature SynthesisThe Fracture Toughness and DBTT of MoB Particle-Reinforced MoSi2 CompositesThe Thermal Stability of Mo(Al,Si)2 PhaseResource Recovery of WC-Co Cermet Using Hydrothermal Oxidation TechniqueDetermination of Sintering Temperature of Nanocomposite WC-CoStudy on the Wear Resistance of Micro-Nanostructured WC Composite Coating Sintered by Induced HeatingPreparation of Al-Based Metal Matrix Composites Reinforced by Cu Coated SiC ParticlesNovel Low Thermal Conductivity Ceramic Materials for Thermal Barrier CoatingsSynthesis of Gadolinium Zirconate by Coprecipitaiton and Its Properties for TBC ApplicationThermal Conductivity of the New Candidate Materials for Thermal Barrier CoatingsPreparation and Characterisation of Gd2Zr2O7 Ceramic by Spark Plasma SinteringHydrolysis of a-TCP and Development of Hydroxyapatite WhiskersPreparation of Porous ?-TCP CeramicsMicrowave Plasma Sintering and In Vitro Study of Porous HA/?-TCP Biphasic BioceramicsEffect of Electrodeposited Hydroxyapatite Coatings on Biomedical Titanium by Cathode RevolvingPreparation and Effectiveness of Antibacterial Hydroxyapatite Powder Containing SilverMorphology Tailoring of Hydroxyapatite Nanoparticles by Hydrothermal Processing with Amino AcidsPrecipitation of Hydroxyapatite on Oxide Film Containing Ca and P by Hydrothermal TreatmentPreparation of Porous Hydroxyapatite ScaffoldsStudy on Physicochemical Properties of the Carbonated Hydroxyapatite Bone CementMechanical Properties of Macroporous Biphasic Calcium Phosphate Bioceramics Fabricated Using a PorogenGelcasting of Mechanochemically Synthesized HydroxyapatiteSynthesis of Calcium Phosphate/Gypsum Composite PowdersProcessing of Calcium Phosphate Porous Materials by 'Self-Setting'Setting Behavior of Fast-Setting Calcium Phosphate Cement with Mineral Phase of BoneSynthesis of Apatite Ceramics with Bimodal Pore Structure Using Mechanochemically Prepared Fine Apatite PowderFormation of Bone-Like Apatite of Bioceramics Modified by Cold Plasma in SBF and Mechanism of Active ModificationApatite Formation on Porous TCP In Vitro: A Comparative Study between Static and Dynamic RSBF SystemsPreparation and Evaluation of Macroporous Sol-Gel Bioglass with High Mechanical StrengthMechanism of Apatite Formation on Sol-Gel Derived PDMS-Modified SiO2-CaO-P2O5 Hybrids with Various P2O5 ContentMPACVD Nanocrystalline Diamond for Biomedical ApplicationsMicrostructure and Controllable Degradation of Bioglass Reinforced Calcium Phosphate ScaffoldsThe Influence of Nanosized Leucite on Dental Porcelain PropertiesMicrostructure and Bio-Mineralization Behavior of the Sol-Gel Derived Bioactive MaterialsStructural Assessment of Microsphere-Based Tissue Engineered Scaffold from Poly(Lactic Acid)/?-Tricalcium PhosphateEffects of Ingredients and Post-Heat Treatment on Phase Transformation and Structure of Bioactive Composite CoatingsImproving Subcritical Crack Growth Resistance for Alumina Glass Dental CompositeStudy of Animal Bio-Ceramic Implants with 3D High Resolution CTThe Monolithic Glass-Ceramic Lined Steel Elbow Made by SHS Gravitational-Thermite ProcessCrystallization and Thermal Expansion of MgO-Al2O3-SiO2-TiO2 Glass-CeramicsCrystallization and Mechanical Properties of Spodumene-Diopside Glass CeramicsPreparation and Characterization of the Nano Powder for Al2O3-SiO2-CaF2 Glass by Homo-Precipitation MethodMicro-Morphology of Crystal Separated from Glass by the Heat-Treatment with an Electric FieldNucleation and Crystallization of Glass-Ceramics from Coal Fly AshSurface Crystallization of ZnO-Al2O3-SiO2 GlassIndentation Size Effect in the Nanohardness of Soda-Lime GlassStudy on Corrosion Mechanism of CAS Glass-Ceramic to Refractories by EPMAStudy of Thermal Shock Resistance of Sagger Plate Used in Floppy Magnets SinteringPreparation and Characterization of Al2O3 Coated Graphite PowdersColloidal Process of Magnesia-Carbon Refractory and Its Sintering CharacteristicEffect of CaO Content and Microstructure on Hydration Resistance of MgO-CaO Clinkers?-SiAlON Bonded Corundum Material and Its Application as Sliding Gate Plate for Continuous CastingCorrosion Behavior of BF Slag to SiAlON Bonded Corundum RefractoriesSlurry Erosive Wear Characteristics of Engineering Ceramics for Hydraulic MachineryOxidation Properties of Three Dimensional (3-D) Carbon Fiber Preform Coated by SiC-SiO2Thermal Expansion Behavior of Al Hybrid Composite Reinforced with Aluminum Borate Whisker and Magnetic Ceramic ParticleDry Friction and Wear Properties of Aluminum Matrix Composites Reinforced with 3D Network CeramicsOxidation Process of FeNi42Cr6 Alloy Array MaterialsPhase Changes in Fe-Si Powder Mixtures by Mechanical Alloying and Subsequent Heat TreatmentFormation of Fe-6.5wt%Si Sheets by Powder Rolling and SinteringImproving the Suspension Property of Non-Plastic Material Slurry with LecithinStudy on the Cemfiber Reinforced High-Performance ConcreteStudies on the Improving Performance of Ordinary ConcreteThe Brazilian Reliability Test and Micromechanical Modelling for Channelled Cylinders of Multiphased Porous CeramicsUnified Model for Fracture of Brittle SolidsNovel Estimation of Critical Frontal Process Zone of Ceramics by a Single-Edge V-Notched-Beam TechniqueA Tensile-Load Relaxation Test for Measuring the Stress Enhanced Corrosion Exponent of Ceramics with Open PorosityDescription of Unloading Behavior of Berkovich NanoindentationDetermination of the Load-Independent Hardness by Analyzing the Peak-Load-Dependence of the Unloading Slope in NanoindentationProperties of Cracking Resistance of Cemfiber Reinforced ConcreteInvestigation on Stress Fields in Lined-Ceramics of the Composite Pipes Fabricated by SHS Metallurgical ProcessThermal Fatigue Life Prediction of Ni Base Alloy Ceramic Composite CoatingThe Toughening Action of Comprehensive Transformation on Mixed Mode II-III CeramicsDesign and Fabrication of an Advanced Ceramic Material Based on the Wear ResistanceStudy on the High Efficiency Organic Grinding Fluid Used for Ceramic GrindingSphering Mechanism for the Green Ceramic Balls Ground with the Two-Wheels Grinding TechniqueWettability of SiC/Ag Plus Ti SystemStages of Reactive WettingA Novel Approach for Metal Surface ModificationIn-Flight Behavior of Ceramic Particle in Plasma Spray FormingA Numerical Simulation for Temperature Field of Plasma Arc Cutting CeramicsNear Net Forming of Metal-Ceramic Parts by Plasma SprayingCharacterization Methods of Pores in Ceramics and Their AnalysisNonlinear Dynamic Analysis and Nonlinear Structure of Self-Propagating High-Temperature Synthesis ProcessProbabilistic Modeling for Composites with Particle Interface DegradingNumerical Simulation of Temperature Field in Desulphurizing LanceApplication of Materials Design Based on Genetic Neural NetworkSome Aspects of Research on Layered Ceramic Composites in ChinaCarbo-Nitride Coating Treatment of Titanium by a Diffusional MethodDevelopment of Functionally Graded Anti-Oxidation Coatings for Carbon/Carbon CompositesDesign, Processing and Evaluation of Graded Piezoelectric Ceramic Bending ActuatorsMulti-Layer Silicon Nitride Laminates Exhibiting High Fracture Toughness and Crack DeflectionMechanical Properties and Oxidation Behavior of Si3N4/BN Laminated CeramicsLaminated Si3N4/SiC Composites with Self-Sealed StructureHigh-Temperature Mechanical Properties of Al2O3/Ti3SiC2 Multilayer CeramicsTiB2/AlN/Cu Functionally Graded Materials (FGMs) Fabricated by Spark Plasma Sintering (SPS) MethodEffect of TiC Content on Fracture Toughness of TiC-Ti5Si3 CompositesDiamond Coated on Cobalt-Deficient Gradient Tungsten CarbideMicrostructure and Mechanical Performances of Plasma-Sprayed Functionally Gradient HA-ZrO2-Bioglass CoatingsElectrophoretic Deposition of Pb(Zr,Ti)O3 Powders on Silicon Wafer and Sintering Densification ApproachPreparation and Characterization of Compositionally Graded Epitaxial Barium Strontium Titanate Thin Films via Scanning Probe MicroscopyRaman Spectra Study on Multilayered Compositional Graded (Ba0.8Sr0.2)(Ti1-xZrx)O3 Thin FilmsFabrication and Evaluation of PZT/Ag Piezoelectric Composites and Graded ActuatorThe Preparation and Properties of New Silver-Metal Oxide Graded Composite Electrical Contact MaterialsPreparation of Multilayer Barium Titanate PTC Thermistor with Low Room Temperature ResistanceApplication of Ceramics Metal Functionally Graded Materials on Green Automobiles
