Sonstiges, Englisch, 2800 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 2800 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908454-98-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Processing, Properties and Possible Applications of PZT-Based Thin FilmsHigh Piezoelectric Property and Low Dielectric Constant PZN-PZT CeramicsMolten Salts Synthesis of Relaxor Ferroelectrics PMN-PT PowdersEffect of PbO-Based Glass Frit Additives on Physical and Electrical Properties of 0.125PMN-0.875PZT Piezoelectric Ceramics near the Morphotropic Phase BoundaryElectrical Properties of (1?x)(0.8PMN-0.2PNN)-xPT Ceramics near the Morphotropic Phase BoundaryEffects of Rare Earth Gd Doping on Ferroelectric Properties of PbZr0.52Ti0.48O3 Thin Films Prepared by Sol?Gel Methods Textured Pb(Mg1/3Nb2/3)O3?PbTiO3 Ceramics Prepared by Reactive Templated Grain GrowthThe Effect of Zn2+ Deficiency on Ordered Micro-Regions and Dielectric Properties of Pb(Zn1/3Nb2/3)O3-Based Relaxor CeramicsStructure and Electrical Properties of Pb(Ni1/3Nb2/3)O3-Pb(Zr/Ti)O3 RelaxorsPb(Mg1/3Nb2/3)O3- Pb(Ni1/3Nb2/3)O3-PbTiO3 Crystals by Solid State GrowthEffect of Different Doping on the Structure and Field-Stability of PMNT CeramicsStructure and Electrical Properties of Rapid Thermally Annealed PZT Films Deposited through Sol-Gel ProcessDielectric Properties and Phase Transition of [110]-Oriented 0.68PMN-0.32PT Single Crystals Induced by Temperature and DC Electric FieldPreparation of Pb(Mg1/3Nb2/3)O3 Relaxor Ferroelectric by Sol-Gel RouteDielectric Properties of (Bi1/2Na1/2)TiO3-SrTiO3 Ferroelectric CeramicsDielectric Properties of Y3+-Doped Ba0.62Sr0.38TiO3 CeramicsPiezoelectric and Dielectric Properties of (Bi0.5Na0.5)TiO3- (Bi0.5K0.5)TiO3-BaTiO3 Lead-Free Piezoelectric CeramicsInvestigation of Field-Induced Piezoelectric Properties in Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics for Transducer ApplicationsLow Temperature Sintering (Ba1-xSrx)TiO3 Ceramics by Using CuO-TiO2 Mixture as Sintering AidPreparation of Plank-Like BaTiO3 by Hydrothermal Soft Chemical Process from Layered Titanate PrecursorsPreferred Orientation Growth of Ba0.6Sr0.4TiO3 Thin Films with Epitaxial MgO Buffer Layer on Si(100) SubstrateReliability of Ba(Zr0.1Ti0.9)O3 Ferroelectric Thin Films under Various Frequencies for Nonvolatile Memory ApplicationPreparation and Characterization of Citrate Sol-Gel Derived Ba(Zr,Ti)O3 Ceramics with Al2O3 AdditionEffect of Deposition Parameters on Crystallization of RF Magnetron Sputtered BST Thin FilmsThe Effect of Different Doping Methods of Sintering Aids on the Barium Titanate Based X7R CeramicsPreparation of Ferroelectric BaTiO3 Films by Electrophoretic Deposition TechniquePreparation and Dielectric Properties of the Nb and Co Doped Barium Titanate by Sol-Gel Auto-Ignition Synthesis ProcessFabrication of (Ba,Sr)TiO3 Thin Films by Hydrothermal Crystallization of Sol-Gel PrecursorDielectric Properties of HGRP BaTiO3 Based X7R MaterialsSynthesis and Characteristics of Infrared-to-Visible Upconversion Nanoparticles through a Microemulsion SystemInfluence of Different Dopants on the Piezoelectric Properties of the Na1/2Bi1/2TiO3-BaTiO3- Lead-Free CeramicsTape Casting of Ba0.7Sr0.3TiO3 for Tunable Microwave DevicesElectrophoretic Deposition Ba0.65Sr0.35TiO3 Thick Films for Tunable Microwave Devices(Ca,Sr,Ba)TiO3-Based Dielectrics Sintered in Reducing AtmosphereElectric and Damping Properties of PU Based IPNs-BaTiO3 NanocompositesTexture Development in Na1/2Bi1/2TiO3-BaTiO3 Ceramics by Reactive-Templated Grain GrowthEffect of Sr/Ba Ratio on Dielectric Properties of BSTN CeramicsThe Influence of Thin Film Thickness on the Characteristics of Bismuth Titanate OxideStructure and Dielectric Properties of Homogeneous Srm-3Bi4TimO3m+3 (m = 3, 4, 5, and 6) CeramicsThe Influence of Precursor on the Microstructure and Characterization for Sr0.5Ba0.5Bi4Ti4O15 Thin FilmsSynthesis and Properties of (Bi0.5Na0.5)TiO3 Powders by Hydrothermal MethodFabrication and Properties of SrBi2(Ta1-xNbx)2O9 Ferroelectric CeramicsStudy on Ferroelectric Properties of Nd-Doped Bi4Ti3O12 Thin Films Prepared by Sol-Gel MethodElectrical Characteristics and Microstructures of Gd-Doped Bi4Ti3O12 CeramicsElectrical Characteristics and Microstructures of Nd2O3-Doped Bi4Ti3O12 Thin FilmsDielectric Characterization and Microstructures of Pr6O11-Doped Bi4Ti3O12 Thin FilmsDielectric Characteristics of Doped Strontium Titanate within Broad Temperature RangeHydrothermal Preparation of Bismuth Titanate NanopowdersFabrication of Bi3NbTiO9 Thick Films by Air Flow DepositionThe Crystalline, Dielectric and Pyroelectric Properties of (1-x)Pb(Sc0.5Ta0.5)O3-xPb(Zr0.52Ti0.48)O3 Relaxor Ferroelectric CeramicsEpitaxial Growth and Electrical Characterization of PBZT Thin Films by RF Magnetron Sputtering DepositionMicrostructure Characteristics in the BaTiO3-La2O3-Nb2O5 Ternary SystemFerroelectric Properties of Bi3.4Y0.6Ti3O12 Thin Films Prepared by a Modified Sol-Gel ProcessPhase Structure and Electrical Properties of Bi1/2Na1/2TiO3-KNbO3 Lead-Free Piezoelectric CeramicsSintering and Dielectric Properties of Excess Bi2O3 Doped BaBi2Nb2O9 CeramicsPreparation of Bi-Layered SrBi2Ta2-xVxO9 Ceramics (0.1 ? x ? 0.4)Microwave Dielectric Properties of Ca[(Li1/3Nb2/3)0.95Zr0.15]O3+d Ceramics with Ba2+ Substitution at A-SiteInfluence MnO2 on the Properties of (LixNayK1-x-y)NbO3 CeramicsPreparation of Ferroelectric K0.5Na0.5NbO3 Films by Sol-Gel ProcessingComposition Range of Morphotropic Phase Boundary and Electrical Properties of NBT-BT SystemEffects of Processing Conditions on the Dielectric Properties of CaCu3Ti4O12 CeramicsPreparation and Characterization of LiNbO3 Thin Films Derived from Metal Carboxylate GelsBridgman Growth of a Novel Piezoelectric Single-Crystal Material: Ca3NbGa3Si2O14Preparation and Properties of (La, Sr) MnO3 Thin Films Prepared by Sol-Gel MethodNa1-xKxNbO3 (x=0.2~0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma SinteringEffect of TiO2 Nanopowders on the Sintering and Electric Properties of Lead Zirconate Titanate CeramicsStability of the Perovskite Structure in BSPT-Based Ferroelectric CeramicsProperties of Ultrafine High Curie Temperature (1-x)BiScO3-xPbTiO3 Ferroelectric CeramicsPreparation of Composite Ceramics of NiFe2O4/PZT by Sol-Gel Method and their Magnetoelectric EffectInvestigation of High-Quality ZnO Film on Polycrystalline Diamond Wafer for Fabrication of High Frequency SAW FilterPreparation of BaTi4O9 - BaPr2Ti4O12 Composite Powders via Ethylenediaminetetraacetic Acid PrecursorThe Influence of La2O3 Additive on the Dielectric Properties of Ba0.6Sr0.4TiO3-MgO Bulk CeramicsPreparation of BaSm2Ti4O12 Microwave Dielectric Ceramics via a Polyacrylamide PrecursorPhase Development and Microwave Dielectric Properties of Ba4(Sm1-yNdy)9.33Ti18O54Fabrication of Ba6-3x(Sm0.2Nd0.8)8+2xTi18O54(x=2/3) Ceramics by Solid State ReactionThe Microwave Characteristics of Glass-Ba2Ti9O20 CeramicsEffects of Ta5+ Substitution on Structure Transition and Microwave Dielectric Properties of Zn(Nb1-xTax)2O6 CeramicsInfluence of Hydrothermal Conditions on ZST Powders for Microwave CeramicsDielectric Properties of Ba(Mg0.2/3Zn0.8/3Nb2/3)O3 and Ba1-xSrx(Mg0.2/3Zn0.8/3Nb2/3)O3 Microwave CeramicsEffects of CeO2 Additive on Property of Ba0.6Sr0.4TiO3-MgO Ceramics for Phase ShifterEffects of CuO and V2O5 Addition on Sintering Behavior and Microwave Dielectric Properties of (1-x)Ca2P2O7-xTiO2Structure and Dielectric Properties of Zn Doped PST Thin Films Prepared by Sol-Gel MethodMicrowave Dielectric Properties of (1-x)(Ca0.61Nd0.26)TiO3?x(Li0.5Sm0.5)TiO3Temperature Compensated (1-x)(Na0.5La0.5)TiO3+xCeO2 Microwave Dielectric Ceramics Incorporated with Copper OxidePreparation and Microwave Dielectric Properties of (1-x)Ca2/5Sm2/5TiO3 -x Li1/2Nd1/2TiO3 CeramicsEffect of ZnO-V2O5 Co-Doping on Phase Stability and Microwave Dielectric Properties of ZnTiO3 CeramicsEffect of V2O5 Addition on the Microwave Dielectric Properties of Ba(Mg1/3Nb2/3)O3 CeramicsStructure and Dielectric Properties of Citrate Sol-Gel Derived Microwave Ceramics in CaO-ZnO-TiO2 SystemMicrowave Dielectric Property of Porous Silicon Nitride CeramicsPreparation and Microwave Permittivity of SiC-AlN Solid Solution PowdersProperties of Silicon Nitride Using Cordierite as Sintering AdditivesResearch on Sintering Dynamics and Microwave Dielectric Properties of Bi and Mn Doped Lead-Based CeramicsA Piezoelectric Actuator for Transporting Living CellsOrganic-Inorganic Nanocomposite Electrodes for Dielectric Elastomer ActuatorElectro-Mechanical Coupling Performances of a Piezoelectric BimorphMechanical Properties of Piezoelectric Stack Actuators under Electro-Mechanical LoadingAnalysis of Dynamic Response for Piezoelectric Vibration Converter by Finite Element SimulationA Novel Cylinder Driving Ultrasonic MotorActuative Properties of CP Actuator Consisting of Polypyrrole Film and Solid Polymer ElectrolyteResonant Modes of Piezoelectric Disc Structure and their Application in Micro Ultrasonic MotorsDynamic Properties of Fine-Scale 1-3 PZT/Epoxy Piezoelectric CompositesA-Site Cational Size Disorder Effects in La0.55Ca0.45MnO3Electric Fatigue of PZT Piezoelectric Ceramics under Bias and Unipolar Pulse Cycling FieldBipolar Electric Fatigue in Ferroelectric Nb-Doped PZST CeramicsPropagation and Deflection of Electric-Field-Induced Microcracks in 0.69Pb(Mg1/3Nb2/3)O3-0.31PbTiO3 Ferroelectric Single CrystalsDegradation of Lead Zirconate Titanate Piezoelectric Ceramics Induced by Water and AC VoltagesDegradation Aging of BaTiO3 Microwave Ceramic Capacitors for EMI Applications at High-VoltageThe Interfacial Characteristics of Ba0.6Sr0.4TiO3 Films Deposited by Radio Frequency Magnetron SputteringDielectric and Magnetic Properties of BaTiO3/NiFe2O4 CompositesDielectric Properties of Pb(Zr,Ti)O3 Heterolayered Thick Films Fabricated by Screen-Printing MethodFabrication and Electrical Conductivity of a YSZ-NiCr CermetPreparation and SEM of Ni/Ce-YSZ Anode MaterialsProton Conductivity of Amorphous Hydrated Zirconia-Yttria Solid SolutionsSynthesis and Characterization of (Gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel CellPreparation and Properties of Ce0.9Sm0.1O1.95 as the Electrolytes of IT-SOFCNitrate-Citrate Combustion Synthesis and Properties of Ce1-xGdxO2-x/2 Solid SolutionsStructural and Morphological Transformation of NaX Zeolite Crystals at High TemperatureA Study on SrCe0.9Y0.1O3-a Synthesized by Solid State Reaction and the Liquid Citrate MethodHigh Performance Low Temperature Ceramic Fuel Cell with Zinc Doped Ceria-Carbonates Composite ElectrolyteLimiting Current Oxygen Sensors with LSF as Dense Diffusion BarrierStructure and Ionic Conductivity of Ln2Zr2O7-Type Rare Earth ZirconatesElectrical Conductivity of Mixed Conductors (YO1.5)x-(CeO2)y-(ZrO2)1-x-yNovel Catalytic Electrodes for High Performance Solid Oxide Fuel Cells Operated at Intermediate TemperaturesFabrication of YSZ/Ni Composites by GelcastingMicrostructure and Electrical Conductivity of Ni-YSZ Cermets Prepared by Combustion Synthesis MethodNiO-SDC Powder for Solid Oxide Fuel Cell Anode Applications by Buffer Solution MethodPreparation and Characterization of Sm1-xSrxCoO3 Ceramics by the Gelcasting ProcessPreparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm2O3, Gd2O3, Eu2O3 and CeO2) for La2O3 in LaOn the Sealing Materials for SOFCInvestigation on Structure and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 for Lithium Ion BatteriesElectrochemical Performance of Al2O3-Coated LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-Ion BatteriesSynthesis and Electrochemical Properties of a LiNi0.7Co0.3O1.9Cl0.1 Cathode Material for Lithium-Ion BatteryImprovement of the Electrochemical Performance of LiFePO4 Cathode Composite Material Using a In Situ Pyrolysis Carbon Synthesis ProcedurePreparation and Electrochemical Characterization of Mn/Pb Composite Oxides for SupercapacitorsDesign and Preparation of Nano-Electrodes for Dye-Sensitized Solar CellPreparation of Spherical Spinel LiMn2O4 Cathode Material for Lithium Ion BatteriesUltra Stable Sealing Glass for Intermediate Temperature Solid Oxide Fuel CellsPreparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel CellsFuel Cell Studies Using the CeO2-La2O3 Based ElectrolytesNovel AC-MO-CSC Anode for Direct Methanol Low Temperature Ceramic Fuel Cells Manufacturing Processes of Solid Oxide Fuel Cell ComponentsElectrochemical Performance of AA Size MCMB/LiCoO2 Lithium-Ion Battery Using Three-Electrode CellLiNiO2 Thin Films Fabricated by Diffusion of Li on Ni TapesImprovement of Electrochemical Properties of LiFePO4/Carbon Composite Doped by Al3+ IonsSpinel Li4Ti5O12/C Composites as Potential Anode Materials of Lithium BatteriesAl2O3 Coating of Spherical LiNi0.8Co0.2O2 for Li-Ion BatteriesFine Lithium Iron(II) Phospho-Olivine Prepared by Different MethodsFine-Particle Lithium Iron Phosho-Olivine Synthesized by a Novel Modified Solid-State ReactionThe Effect of Silicate Layers on Electrochemical Properties in Nanocomposite Solid Polymer ElectrolytesLow Temperature Electrolyte for Li-Ion BatteriesPoly(Acrylonitrile-Methyl Methacrylate) Based Microporous Gel Electrolyte for Li-Ion BatteryNovel-SiO2-Doped Proton Exchange Membrane for Self-Humidifying Fuel CellNano Sulfur Composite for Li/S Polymer Secondary BatteriesOptical Property of Spark Plasma Sintered Translucent AlN CeramicsModification of Optical Waveguide Material PMMA with Nano-Silicon by Sol-Gel ApproachSynthesis and Second-Order Optical Nonlinearity of Inorganic-Organic Hybrid Films Bearing Y-Type NLO Active ChromophoreOptical Properties of Nanocrystalline Ag Doped Silica Inverse OpalsLarge Nonlinear Optical Property of SrBi2Nb2O9 Thin Films Prepared by RF Magnetron SputteringUp-Conversion Luminescence in Thulium Doped Barium Titanate Inverted OpalDependence of Electrical and Optical Properties of the Al Doped ZnO for Transparent Conductors Deposited by rf?Magnetron Sputtering on the O2/Ar Gas Flow RatioCrystallinity and Photoluminescence Properties of ZnO Films on Zn Buffer Layers Deposited by rf Magnetron SputteringFabrication, Properties and Theoretical Simulation of Multi-Layer Ceramic Structure Meta-MaterialsInfluence of Coumarin Dyes on the Laser Performance of Pyrromethene and Perylene Dyes Co-Doped into ORMOSILsGrowth and Characterization of Zinc Oxide Films by Pulsed Laser Deposition for Ultraviolet DetectionEnhancement of the Quality of the ZnO Thin Films by Optimizing the Process Parameters of High-Temperature RF Magnetron SputteringPreparation and Characterization of ZnO Thin Film Doped with Eu via Sol-Gel MethodZinc Oxide Thin Films with Reduced Native Compensative Defects Grown by Ultrasonic Spray Pyrolysis at AtmosphereSynthesis and Characterization of Y2O3:Eu3+ Film Derived by Sol-Gel ProcessingLuminescence Properties of MO-Re2O3-B2O3:Eu3+ (M= Mg, Sr; Re=Y, Gd ) under VUV ExcitationPreparation and Properties of Ti, Eu Co-Doped Y2O2S:0.06Ti,0.08Eu Phosphor with Red Long AfterglowLuminescence Reducing Mechanism of Cd Doped Y2O2S:Ti,Cd Long Afterglow PhosphorModification of Ce-Doped YAG Phosphor with Flux and Ion SubstitutionSynthesis of Green-Emitting Phosphor Y3Al5O12: Tb, Ce, Gd by Sol-Gel MethodStudy on the Synthesis of Long Afterglow Nano-Phosphors SrAl2O4:Eu,Dy by Microemulsion MethodPreparation of a New Red Long Afterglow Phosphor Strontium Aluminate CompositionLuminescence Properties of Spherical Phosphors SrSiO3:Eu3+Luminescence Properties of M2MgSi2O7: Re (M = Ba, Sr, Ca) (Re = Eu2+, Ce3+, Tb3+)Luminescent Properties of Sr2B5O9Cl Phosphor Doped with EuSynthesis and Luminescent Properties of Ce3+-Activated SrGa2O4 and Sr(Ga-Al)2O4Microstructural and Micromorphological Studies on ZnSe Single Crystals Using AFM/FE-SEM/RO-XRDGa2O3 Films Grown on Sapphire by the Thermal Evaporation of GaN PowdersSynthesis of Ultrafine Lu2Hf2O7/Tb Phosphor by Solution Combustion ProcessWhite Anodic Coatings on Aluminum Alloy with Low Ratio of Solar Absorptance to Infrared EmittanceNear-Infrared Luminescence and Energy Transfer Characteristics of Dy3+-Tm3+ Co-Doped Selenide GlassesEffects of Glass Frits on the Properties of Luminescent CeramicsStrong Near-Infrared Luminescence from NiSi2-Passivated Silicon Nanocrystals Embedded in SiOx FilmsAnnealing Environment Effect on the Nanocrystalline Silicon Related Photoluminescence in Silicon Rich Alumina FilmsOn the Multilayered Chip-Type PTC Elements Prepared by Roll-Forming ProcessLiquid Desiccant Drying Method for Gelcasting PTC Ceramics Based on BaTiO3Microwave Synthesis of BaTiO3 from BaCO3 and TiO2Relations between the Morphology of ZnO Powders and the Electrical Performance of ZnO VaristorsEquivalent Model of Modified Bismuth Oxides Described by Fractional DerivativesMicrostructure and Electrical Properties of ZnO-Pr6O11-Dy2O3-Based Varistor Ceramics Doped with La2O3Preparation and Acetone Sensitive Characteristics of Pure and Cu2+-Doped LaFeO3 Semiconductor Thin FilmsSynthesis of La-Mn Substituted M-Type Ba Hexaferrites by Sol-Gel MethodFerromagnetic Properties of Ni0.2Cu0.2Zn0.6Fe2O4-PZT CompositesA New Low-Temperature Sintering Method for NiCuZn FerriteAn Investigation on the Optimum Conditions for Preparation of Pure Mn-Mg-Zn Ferrite PowderOptimization of the Effective Parameters on the Synthesis of the Mn-Zn Ferrite Powder with a High Saturation Magnetization Using Different Iranian Routs of Iron OxideEffect of Phase Formation on Magnetism of Sol-Gel Derived PbTiO3/(Ni, Pb) Ferrite Composite PowdersComplex Impedance Spectroscopy of Bi-Substituted Yttrium Iron Garnet (YIG)Application of Rare Earth Permanent Magnet on Magnetic Abrasive MachiningGrowth and Characterization of BaZrO3 Buffer Layer for Textured YBCO Thin Films Growth on MgO (00l) SubstrateThe Stability Range of Lead Oxide Compounds in Bi-System High Temperature Superconducting MaterialsSynthesis of MgB2 from Anhydrous B2O3 by Ball Milling Method and Determination of Superconductivity PropertiesCeO2 Buffer with (200) Preferential Orientation on R-Cut Sapphire by a Solution Deposition TechniquePreparation of BaRuO3 and BaIrO3 Films by Laser AblationEffects of Different Antimony Dopants on ZnO-V2O5 Based Varistor CeramicsFabrication of High Performance Multilayer ZnO Varistors with Chemically Synthesized Doped Zinc Oxide PowderEffect of V2O5 Additive on the Microstructure and Electrical Properties of Mn-Co-NiO NTC ThermistorModification of Thick-Film Conductors Used in IP Technology for Reduction of Warpage during Co-Firing of LTCC (Low Temperature Co-Fired Ceramic) ModulesMorphologies and Microstructures of Antimony-Doped Tin Oxide Films Derived by Sol-Gel Dip-Coating ProcessingThe Optical and Electrical Properties of Antimony-Doped Tin Oxide Transparent Conducting Thin Films Prepared by Sol-Gel Dip-Coating TechniqueImproved Electrodeposition of CuIn1-xGaxSe2 FilmsStudy of In2O3 Thin Films Prepared on TiN Substrates Using a Triethylindium and Oxygen MixtureResistivity-Temperature Properties of La(TixMn1-x)O3 CeramicsControl of Shrinkage Behavior and Thermal Expansion Coefficient in BaTiO3-Added Ni ElectrodesFabrication of Heater Element in Release SystemA Novel Ceramic Pressure SensorEffect of Treatment Process on the Structure and Properties of Sr0.48Ba0.24Ca0.28TiO3-Based Varistor CeramicsMicrostructure and Properties of Ni0.5Zn0.5Fe2O4-BaTiO3 CeramicDielectric Properties of LTCC System of Al2O3 and Borosilicate GlassFabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic PressingEffect of Raw Materials on the Thermal Conductivity and Microstructure of Aluminum NitrideSrTiO3 Based Dual-Functional Ceramics with Nano-AdditivesDielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma SinteringPreparation and Properties of Ni-Si-O Thin Film Prepared by Sol-Gel MethodNa-Site Doping of NaCo2O4 Thermoelectric MaterialsPreparation and High Temperature Thermoelectric Properties of [Ca2(Co0.65Cu0.35)2O4]0.624CoO2 CompoundLarge Thermoelectric Response of Ti-Containing Perovskite OxidesProgress in Researches on the Layered Cobalt Oxides for Thermoelectric DevicesModulated Structure of Bi1.8Sr2.0Rh1.6OxPreparation and Properties of Zinc Oxide and Titanium Oxide Ultra-Fine Composite Particles for Attenuation of Ultraviolet RadiationStatic and Dynamic Characteristics of Thermoelectric CeramicsSynthesis and Thermal Properties of Nanoscale Skutterudite via Cross-CoprecipitationMicrostructure and Thermoelectric Properties of CoSb3 Synthesized by MA-SPS MethodSynthesis and Lattice Thermal Conductivity of Double Atoms Filling p-Type CamCenFexCo4-xSb12 CompoundsHigh Temperature Thermoelectric Property of Sr-Filled Skutterudite SryCo4Sb12Influence of Extrusion Temperature on the Thermoelectric Properties of p-Type Ag Added (Bi0.25Sb0.75)2Te3 Alloys Prepared by MA-PDSPreparation of AgxPbmSbTe2+m-Based Thermoelectric Materials by MA-SPS Method and Evaluation of their Thermoelectric PropertiesThermoelectric Properties of Ag1-xPbmSbTe2+m CompoundsHigh Temperature Thermoelectric Properties of AgPb18+xSbTe20Annealing Effects on Powder Metallurgy Based Pb1-xSnxTe Materials for Thermoelectric ApplicationsThermoelectric Properties of Bismuth Telluride Based Materials Prepared by Powder Metallurgy ProcessingElectrical Properties of P-Type Thermoelectric AgxBi0.5Sb1.5-xTe3 (x=0.05~0.4) Alloys Prepared by Spark Plasma SinteringTemplate Synthesis of Bismuth Porous Films and Networked X-Shape NanowiresThe Influence of Oxygen on the Electrical Properties of Bulk and Thin Films of PbTe SemiconductorsStructural Evolution of Nb/NbC Multilayer CoatingsHeat to Electricity Conversion Efficiency Measurement for Thermoelectric UnicoupleHigh-Efficiency Thermoelectric Air-ConditionerNovel High-Intensity Thermoelectric Generator and its Application on Hybrid Electric VehiclePreparation and Characterization of Sr, Ba Filled Type-I Ge Clathrate Single CrystalsThermoelectric Properties and Mechanism on Porous Silicon WaferStructural and Optical Ceramics: Yesterday, Today, and TomorrowOn the Progress of Combustion Synthesis of Si3N4 Ceramic: From Laboratory Research to Industrial ProductionFabrication and Characteristics of Al2O3/Cu Composite Particles by MA & PCSPreparation of Submicron Silica Powders from Sodium Silicate Using Ultrasonic EnergyPreparation of Mullite Powder by Aluminum Sulfate and Silica in Molten Sodium SulfatePreparation of Ultrafine ?-Sialon Powder by Citrate Sol-Gel and Carbothermal Reduction NitridationPreparation of (Ca+M) (M=Mg, Yb, Sr) Co-Doped a-SiAlON Powders by Combustion SynthesisPreparation of Sialon Using Fly Ash with High Content of Al2O3Combustion Synthesis of Magnesium Silicon Nitride Powders in the Mg-Si-N SystemSiC Platelets Synthesized by Powder-Heating TechniqueSynthesis of Sialon-Mullite Composites Using Fly Ash by Carbon-Thermal Reduction NitridationCarbothermal Preparation of Ultra-Fine TiB2 Powders Using Solution-Derived Precursors via Sol-Gel MethodLarge-Scale Fabrication of Ti3AlC2 Powder with High-PurityStudy of Ti3Si1.2-xAlxC2 (x = 0~1.2) Solid Solution via X-Ray DiffractionMechanically Activated Low-Temperature Synthesis of Ti2SnCFabrication and Mechanical Properties of High-Pure Ti3SiC2 Bulk Materials Directly by Hot-Pressing its PowderSurface Coating of Anhydrite Powders with CaCO3 Nano-Particles Prepared in Ca(OH)2-H2O-CO2 SystemTribochemical Effects of MoSi2 Powder in Ball MillingPreparation and Characterization of Ca0.8Sr0.2ZrO3 Powders Prepared by Soft Chemical RouteSynthesis of Mixed Conducting Oxides SrFeCo0.5Oy Powder by Citrate MethodA New Homogeneous Precipitation Route to Ammonium Aluminum Carbonate HydroxideA Novel 3D Patterning Technique for Forming Advanced CeramicsApplication of Acetate Starch to Colloidal In Situ Consolidation Molding Process of Alumina CeramicRheological Behavior of Alumina Aqueous Suspension for Extrusion Gelation Freeform FabricationRheological Properties of Boron Nitride-Silica Composite SuspensionsEffect of Various Dispersants on the Gel-Casting of Silicon NitrideEffect of SiC Powder Characteristic on the Rheological Properties of FeedstockSimulation of Ceramic Injection Molding for Zirconia Optical FerruleSuperplastic Deformation of Nano-Sized a-Sialon CeramicsForming of Large Thin Walled Fused Silica Shapes by GelcastingStudy on Processing Parameters of Ceramic Injection MouldingA New Dewaxing Method and its Effect on the Properties of Low-Pressure Injection Molded CeramicsInjection Molding of Zirconia Ceramics Using Water-Soluble BinderThe Influences of Solid Loading and Molding Variables on Alumina Injection MoldingOn the Defects in Injection-Moulded Technical CeramicsEffects of Different Debinding Atmosphere on the Properties of Powder Injection Molded AlN CeramicsNear-Net Shaping of Microwave Ceramics by Gel-Casting with CarrageenanExtrusion Forming of Cordierite Honeycomb with Hexagonal Open CellsPreparation of PZT Slurry with High Solids Loading and Low Viscosity for GelcastingMagnetic Alignments of Ba-Ferrite Particles in SuspensionSynthesis of Fine Grain Ti3SiC2 by Spark Plasma Sintering with Additive of AluminumFabrication of TiAl Intermetallic by Spark Plasma SinteringSpark Plasma Sintering of CBN-WC-10Co CompositesPreparation of Porous Alumina Ceramics by Spark Plasma SinteringComparison of Spark Plasma Sintering and Hot Pressing of MgAlONLiquid Phase Sintering of a-Si3N4 by Spark Plasma SinteringEffect of Aluminum on Fabrication of Ti3SiC2 by Mechanical Alloying and Spark Plasma SinteringLiquid Phase Sintering Behavior of Amorphous Nano-Sized Silicon Nitride PowdersMicrowave Sintering of Alumina-Silicon Carbide NanocompositesFabrication and Characterization of Porous TiB2 Ceramic with Three-Dimensional Interconnected SkeletonSynthesis of a Novel B3CN3 Compound by Pyrolysis of PrecursorThe Effect of Diluent on Combustion Synthesis of Si3N4-SiC-TiN Ceramics with Small DiameterPreparation of Porous Si3N4 Based Ceramics by Combustion SynthesisLow Temperature Fabrication and Characterization of Porous SiC Ceramics Using Polycarbosilane as BinderProcessing and Characterization of Carbothermal Reduction and Nitridation from Kaolinite-Polyacrylamide Intercalation CompoundFabrication of Reticulated Porous Ceramics with Controlled Structure by Centrifuging ProcessPreparation of Porous Ceramic Support with Inorganic Filtration MembranePreparation of Porous Wollastonite Ceramics for FiltrationFabrication of Porous Silicon Nitride with High PorosityProperties and Application of Oriented Porous SiC as Transpiration Cooling MaterialsFabrication of Porous Cellular SiC Ceramics from Wood by Embedding in Si/SiO2 Powder MixtureStudy of Affecting Factors on Porosity in Gel-Casting FoamPreparation and Characterization of ZrO2 Microspheres by Internal Gelation ProcessPreparation and Microstructure of Bauxite Ceramic MicrosphereHomogeneity of Aqueous Al2O3/3Y-TZP Feedstock by Plastic KneadingEffects of Adding Form of Additives on the Structure and Properties of High-Purity Alumina CeramicsPreparation and Properties of Al2O3-Mullite-SiC Nano-Composite by Slip Casting in a High Magnetic Field and Reaction SinteringPreparation of Zirconia-Toughened Alumina Ceramics through the Dispersal Basic Carbonate PrecursorsStructural Characterization, Crosslinking and Pyrolysis Investigation of Carbosilane OligomersRB-SiC Ceramics Derived from the Phenol Resin Added with StarchTiC/Ti Composite Layers Fabricated by Laser Surface AlloyingFabrication of Lightweight SiC Space MirrorAdvanced Engineering Ceramics for Semiconductor Package TechnologyUltra-High Temperature Ceramics (UHTCs) via Reactive SinteringEffects of Rapid Heat Treatment on Microstructure and Mechanical Properties of Ti2AlC/TiAl CompositeMicrostructure and Properties of Carbon-Ceramic Composite Prepared by Hot-Pressing SinteringMicrostructural Evolution and Mechanical Properties in Yb2O3?Fluxed Silicon Nitride CeramicsProcessing and Properties of Highly Textured Si3N4 MaterialsA Comparison Study on Microstructure and Mechanical Properties of Si3N4 Ceramic Prepared from MACS PowdersMicrostructure of Different Rare-Earth-Doped a-Sialon CeramicsThe Influence of Sintering Process on the Microstructure of Submicron Alumina Fabricated by GelcastingLow Temperature Degradation of Yttria Stabilized ZirconiaEffect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low TemperatureMicrostructure and Phase Composition of (Ce, Mg)-PSZ CeramicsMicrostructure and Mechanical Properties of Ce-Y-TZP Ceramic Composites for Ceramic Plunger and Ball ValveEffect of HIP on the Properties and Microstructure of Transparent Polycrystalline SpinelProcessing of Zinc-Based MgAl2O4 Composite and Effect of Fly Ash AdditionA Study on Toughening and Strengthening of Mg-Al Spinel Transparent CeramicsStudy on the Properties of Alumina Ceramics after Implanted by Titanium Ions with MEVVA SourcesMicrostructures and Mechanical Properties of Nano-Composite Ti(C,N)-Based CermetsPreparation of Amorphous Si-B-C-N Powders and Nano-Sized CeramicsSynthesis and Properties of Ternary Carbide Ti3AlC2 CeramicsPreparation of ZnSe by CVD with the Solid Starting MaterialsNovel Visible-Band Transparent Ceramic Laser Material Mn:MgAl2O4Synthesis, Characterization of Perhydropolysilazane and its Application in the Preparation of 3D SiO2f/Si 3N4 CompositesInfluence of Pressure on the Crystallization in SiO2f/SiO2 CompositesAblated Transformation and Dielectric of SiO2/SiO2 Nanocomposites Dipped with Silicon ResinPreparation and Property Study of 3D Cf/Si-Ti-C-O Composites Fabricated with Polytitanocarbosilane by PIP ProcessMechanical Properties of C/SiC Composites via Precursor Pyrolysis with Pretreated Carbon FiberMicrostructure of Cf/SiC Composite with Precursor of Hexamethyldisilazane by Chemical Vapor InfiltrationProcessing and Properties of 2D Cf/Si-O-C Composites Using Silicone ResinFabrication and Mechanical Properties of SiCf/SiC Composites via Polycarbosilane PyrolysisFabrication of SiC/SiC Composites Using both Chopped Fiber and a Hybrid Reinforcement of Chopped and Continuous FibersTransient Liquid Phase Bonding of 2D Fiber Reinforced Carbon-Carbon CompositesEffect of the Formation of SiC Whisker on the Properties of Al2O3-ZrO2-C MaterialsDielectric and Mechanical Properties of Unidirectional SiC Fiber-Reinforced Aluminum Phosphates CompositeMicrostructure of Pyrolytic Carbon Matrix in Carbon/Carbon Composites after GraphitizationTensile Behavior of Aluminum Matrix Composites Reinforced by Aluminum Borate Whiskers and Magnetic Ceramic ParticlesCNTs/Si3N4 Composites Fabricated by Reaction Bonded ProcessingPhase Evolution of Aluminum-Chromium-Phosphate Binders during Heat-TreatmentEffect of PCS Pyrolysis Process on C Fiber in Cf/SiC CompositeEffect of Oxygen on the Mechanical Properties of Polymer-Derived Si-Al-C-O FibersEffect of Heat Treatment on the Microstructure and Mechanical Properties of Cf/SiC CompositesSilicon Carbide Whiskers Synthesized by Double-Heating TechniqueComposition, Structure and Properties of Low Oxygen Content SiC FibersSAXS Characterization of Nanochannels in Polymer-Derived SiC FibersEffect of Catalyst on the Preparation of Silicon Carbide Whiskers from Silica and CarbonSynthesis of the Fiber Coating by FP-CVI ProcessMicrostructural Characterization of In Situ TiB Whiskers in Ti MMCs Fabricated by SPSPreparation and Morphology of Mullite Whiskers by Sol-Gel MethodThe Preparation of Fibrous MCM-41 Using Microwave HeatingInfluence of Fabricated Process on Mechanical Properties of Porous SiC-Particle/Si3N4 CompositesEffect of Second Sintering on Intragranular Structure and Mechanical Properties of 10vol%Al2O3/3Y-TZP CompositesSynthesis of Aluminum Titanate Solid Solution by Solid State Reaction of Fine Commercial Al2O3, TiO2 and MgO PowdersPreparation of LiTaO3 Ceramic PowdersEffect of Aluminium Sol on Microstructure and Properties of Corundum-Mullite CeramicFabrication of Al2O3-SiC-Mullite Composites from Fly AshPreparation of TiB2 Nanoparticles Reinforced Cu-Matrix Composite by Direct Combustion SynthesisPreparation of Warm Compacted and Sintered WC/Carbon Steel Composite and its Wear-ResistanceThe Preparation and Properties of Si3N4-Filled Epoxy Resin Composites for Electronic PackagingPreparation and Properties of ?-Si3N4/Epoxy Matrix CompositeManufacturing of Polymer Matrix Composite Material Using Marble Dust and Fly Ash Performance Analysis and Experimental Verification for FBG Sensors Applied for Smart StructureMultilayer SiC/Si Composites Derived from PapersAn Investigation of the Reaction Hot-Pressing Synthesis of MoSi2/Ti3SiC2/Al CompositesReaction Path and Microstructures of Ti3SiC2/SiC Composite by Spark Plasma SinteringInterformational Exfoliation of Ti3Al2 Induced by CuThe Reaction between Ti3AlC2 and Cu in the Synthesis Process of Cu/Ti3AlC2 CompositesHigh Performance Composite of Silicon Carbide/ BismaleimideIn Situ Formation of TiC Reinforced Intermetallic-Matrix Composite Layers Produced by Laser CladdingEffect of Ti3SiC2 Content on Mechanical Properties of Ti5Si3-TiC-Ti3SiC2 CompositesSlip Casting of Green Compact of SiAlON Multiphase Ceramics from River SandSteel-Bonded Cemented Carbide GT35 by In Situ Reduction of Natural IlmeniteUnusual Microstructures and Strength Characteristics of Cu/Ti3AlC2 CermetsReaction Synthesis of TiAl-Al2O3 CompositeSynthesis and Structure of Sol-Gel Derived PST/Bi2Ti2O7 Composite Thin FilmsPreparation and Characterization of Copper-Coated Alumina PowdersManufacture and Microstructures of Fe-Cr-C Hypereutectic In Situ CompositesMicrostructure and Mechanical Properties of Heat-Resistant Silicon Carbide CeramicsDefect and its Influence on Mechanical Property of Titanium Diboride-Copper Matrix CompositeMechanical Properties of Al2TiO5 CeramicsHigh Temperature Creep Strength of Si3N4-Y2Si2O7 Ceramics by Stress Relaxation Based on a New Interpretation ModelMechanical Properties and Microstructure of Al2O3-TiC Composite by Hot-PressingPreparation and Properties of BN-SiO2 Composite CeramicsSpark Plasma Sintered ZrO2(Y2O3)-Al2O3-SrSO4 Self-Lubricating Nanocomposites for High Temperature Tribological ApplicationsEffect of Y2O3 on Properties of Al/Ti3SiC2 CompositeA New Ti3AlC2/Cu Cermet Exhibiting Excellent Tribological PropertiesEffect of Micro-Pores after Sintering on Wear Behavior of Zirconium Silicate Composite MicrobeadsFabrication of TiC Particles Reinforced Hadfield Steel Matrix Composite and its Wear-ResistancePlating Copper on Al2O3 Powder in CeramalA Study on the Grinding Performance of Y-TZP/Al2O3 CeramicsPrecision Machining of Si3N4 Refrigerator Friction Couple Based on FEAGrinding of TZP/Al2O3 Composite with Vitrified CBN WheelsHigh Speed Lapping of SiC Ceramic Material with Fixed AbrasiveMicro Groove Machining Characteristics of Si3N4-hBN CompositesWear Characteristics of Twist Drills in Machining FluorophlogopiteSurface Behaviors of ELID Ground Engineering CeramicsIn-Process Electrolytic Dressing Lapping (IEDL) of Al2O3-BN Machinable CeramicsFabrication of SiCN MEMS by UV Lithography of PolysilazaneThermodynamic Properties of GangueProperties of Sol-Gel Bonding CastablesFabrication and Characterization of Mullite Whisker-Reinforced Porous RefractoryColloidal Processing of Alumina-Carbon Ceramic RefractoriesDensification of Unfired Alumina Refractories by the In Situ Spinel Formation during ApplicationPreparation and High Temperature Performance of ?-Sialon Bonded Corundum Multiphase MaterialFabrication of Fe-Al Intermetallic/TiC-Al2O3 Ceramic Composites from Ilmenite by Reaction SinteringPreparation of Nanoporous Super Thermal Insulation Material Compounded with Xonotlite-SiO2-Aerogel and Characterization of the Pore StructureSynthesis and Properties of Silica Aerogel by Using Acid Silica Sol and TEOS as Silicon SourcesThermal Shock Resistance and Ablation Behavior of TiB2-Cu-Ni Composite via Combustion SynthesisA Novel Approach to Prepare Ni-Coated TiB2 CermetMicrostructure and Properties of (Ti,W)(C,N)/(Ni,Mo) Cermets after a Heat-Treatment at High Nitrogen PressureEffect of Cr2C3 Addition on Microstructure and Mechanical Properties of Ti(CN)-Based CermetsResidual Stress Field of Ellipsoidal Ceramic Particles Ni-Base Alloy Composite CoatingFEM Analysis on Thermal Stress of Desulphurization Injection LanceInvestigation on the Porous Biomaterial for Bone Reconstruction with Addition of Bio-Mimetic Nano-Sized Inorganic ParticlesInhibitory Effect of Synthetic Nano-Hydroxyapatite on Dental CariesApatite Formation on the Surface of Dense HA/TCP in Animals' SerumsIn Vitro Degradation of ?-TCP/PLLA Scaffolds with Different Proportions of ?-TCPApplication of Multilayer Collagen/HA Scaffold in Cartilage Tissue EngineeringAFM Study on the Surface Dissolution of HydroxyapatiteSolution Behavior of CaO-MgO-SiO2 System Bio-Soluble Refractory Ceramic FibersThe Interface Reaction between an Ag+-Doped TiO2 Film and Stainless Steel SubstratePreparation of Antibacterial Ceramics with Silver-Carrying Nano-HydroxyapatiteEffect of Reaction Conditions on Pore Configuration and Mechanical Property for Porous Hydroxyapatite Prepared by Polymer Sponge MethodFactors Affecting the Pore Size in Porous Hydroxyapatite Produced by Stir-Froth-Polymerization MethodBiomimetic Fabrication and Characterization of BG/COL/HCA Scaffolds for Bone Tissue EngineeringFCVA-Synthesized Tetrahedral Amorphous Carbon Films for Biomedical ApplicationsA Study on Biomineralization Behavior of Silk Fibroin FilmMicroCT Aided Scaffold Design and PreparationMechanical Properties of Machinable Zirconia Dental CompositesMicrostructure and Crystallization Behavior of Glasses in the ZrO2-ZnO-Al2O3-SiO2 SystemLow-Temperature Sintering of 3Y-TZP/Glass Composites as All-Ceramic Dental MaterialsStructure and In Vitro Bioactivity of Si Enriched Hydroxyapatite/TiO2 Coatings on Pure Titanium by Micro-Arc OxidationMicrostructure Analysis of a Composite System Composed of Zirconia/Alumina Composites and Vita Alpha Coating-Glass for Dental ApplicationsEffect of Surface Roughness on Matching Properties between Ceramic Framework and Coating-Glass for Dental ApplicationsEffect of CNTs on Property of Calcium Phosphate CementPreparation of Unsintering Calcium Phosphate Macroporous Materials with Hydroxyapatite Nanowhisker In Situ GrowthPorous Hydroxyapatite Bioceramics Prepared by Polymeric Sponge Impregnation ProcessSelf-Setting Biphase Porous Calcium Phosphate CementCharacterization of Porous Calcium Phosphate Bioceramics Modified by PorosifierEffects of Setting Liquid on a-Calcium Phosphate-Tetracalcium Phosphate Bone CementIn Vivo Behavior of Injectable Fast-Setting Calcium Phosphate CementImprovement of Anti-Washout Performance of Calcium Phosphate Cement Using Modified StarchElectrochemically Assisted Co-Precipitation of Electrically Conducting Polymer with Calcium Phosphate Coatings on Ti AlloysDegradation Behavior of Calcium Sulfate/?-Tricalcium Phosphate Composites in TrisExploring the Osteoinductivity of Calcium Phosphate Ceramics/PLA or Collagen CompositesPreparation of ?-TCP/HAP Composite BioceramicsPreparation and Characterization of Biodegradable ?-TCP-Based Composite Microspheres as Bone Tissue Engineering ScaffoldsDegradation Behavior of ?-Ca3 (PO4)2/?-Ca2P2O7 BioceramicsPhysicochemical and Mechanical Properties of Composite of Chitosan Microspheres/Calcium Phosphate CementRheological Properties of an Injectable Calcium Phosphate Bone Cement and their Relationship with the Phase EvolutionRepairing the Dog's Femoral Defect with the Autologous Osteoblast Integrated the Nano-Calcium Phosphate/Zirconia ScaffoldBone Formation in Non-Osseous Tissues of Biphasic HA/?-TCP Bioceramics Sintered by Different WaysHydroxyapatite Coatings Deposited on Titanium Substrate by Pulsed Laser DepositionPreparation of Bioactive ?-Tricalcium Phosphate Scaffold with Bone-Like StructureTEM Analysis on Bio-Functional Gradient Hydroxyapatite/ZrO2 CoatingsImprovement of Biocompatibility and Osteointegration of Zirconia Implants by Means of Bioactive Glass Coating: An Experimental Study in AnimalBioactive Ceramics - New Processing Technologies for Immobilization of Microorganisms for Filtration and Bioreactor ApplicationsPreparation of Biphasic Calcium Phosphate Porous Ceramics Prepared from Fine Powders with Different Particle Size and its Dissolution Behavior in Simulated Body FluidApatite Forming on the Surface of Apatite-Wollastonite/?-Tricalcium Phosphate Bioactive CeramicSimulation In Vitro of Subsonic Flame Sprayed Titanium/Biological Glass Composite CoatingBiomimetic Synthesis of PEC-HA Composite Analogous to BoneDevelopment of Ultrafine Fibrous Hydroxyapatite/Polymer Scaffold by ElectrospinningExperimental Study of Biomimetic Mineralization on the Surface of Piezoelectric Pulp-Cap FilmBisphosphonate Pamidronate Modifying Hydroxyapatite Bioceramics for Hard Tissue RepairMicrostructure and In Vitro Bioactivities of HA/Ti Composites Prepared by Hot Isostatic PressingImprovement in the Sensitivity of the Response of Diamond Thin Films to X-RayMicrostructure of Ceramic Layer in Composite Pipe Made by SHS-Gravitational ProcessMicrostructure and Properties of In Situ Synthesis of TiC Particle Reinforced Composite Coating by Induction CladdingAdhesion of Diamond Film to Co- Deficient Cemented Tungsten Carbide SubstrateWear Behavior of Plasma Sprayed Ni-WC Composite CoatingsMicrostructure and Dry Sliding Tribological Behavior of Microarc Oxidation Coating Formed on Ti6Al4V against SteelPreparation of DLC Scratch-Resistant Coating on PC Glass LensesMicro-Tribological Behavior of Boron Carbide Self-Mated PairsFrictional Performance of Brake Pads against Al Metal Matrix Composites with Different Sizes of SiC ParticlesEffects of Pre-Oxide Layer Thickness on Thermal Cyclic Behavior of Thermal Barrier CoatingsCyclic Oxidation Behavior of Thermal Barrier Coatings in Environments Containing Water VaporDesign and Properties of Fire-Proof Coating for TunnelsInfluence of Infiltration Additives on the Phase, Microstructure and Oxidation Resistance of SiC Coating for Graphite MaterialsThermal Cycling Behavior of Lanthanum-Cerium Oxide Thermal Barrier Coatings Prepared by Air Plasma SprayingA Promising Sm1.9Ca0.1Zr2O6.95 Ceramic for Thermal Barrier CoatingsLow Thermal Conductivity Ceramics for Thermal Barrier CoatingsFabrication and Isothermal Oxidation Behavior of the Co-Deposited EB-PVD (NiAl + YSZ) CoatingA Comparative Study of Two-Layer NiAl Bond Coat TBC and its Failure MechanismThermophysical Properties of Samarium-Cerium Oxide for Thermal Barrier Coatings ApplicationA Comparison of the Surface Properties of DLC and Nanocrystalline DiamondInfluence of Impurities on the High-Temperature Water-Vapour Corrosion of Environmental Barrier Rare-Earth SilicatesAnalysis of Heat Transfer and Thermal Stress in Thermal and Environmental Barrier CoatingsInvestigation of YSZ Thin Films on Silicon Wafer and NiO/YSZ Deposited by Ion Beam Sputtering Deposition (IBSD)Influence of Agglomerate Size on the Properties of Al2O3-Al2Cu3 Multiphase Ceramic CoatingsEffect of Heat Treatment on Coloration of Ag Doped TiO2-SiO2 FilmsPhoto-Hydrophilicity and Photo-Catalysis of TiO2-SiO2 Coating on CeramicsAFM Investigation of Nano Particle Incorporated Sb Doped SnO2 FilmsDevelopment and Characterization of Nano-TiO2/HA Composite Bioceramic Coating on Titanium SurfaceInterface Biomechanical Properties between Femora and Bioactive Ceramic Coatings Prostheses during the Initial Implant StageTwo-Steps Digital Image Correlation and Application to Studies of Micromechanics Behavior of Coating InterfaceAdsorption of Human Serum Proteins on Carbonaceous MaterialsThermal Shock Experiment and Simulation of Ceramic/Metal Gradient Thermal Barrier CoatingMechanisms and Kinetics of Silica-Rich Binary Na2O-SiO2 Glass Corrosion in 100?C Water at pH=7Effect of Heat Treatment on the DC Conductivity and Activity Energy of Li2O-Fe2O3-P2O5 GlassesCrystallization of a SiO2-MgO-Al2O3-K2O-Fe2O3-F GlassMaking Fluorophlogopite Ceramics through Ceramic ProcessingPreparation of Decorative Building Glass-Ceramics by Using Cracked-Glass Panel as PrecursorSintering and Crystallization of Glass-Ceramics for Optical Fiber FerruleManufacture Process of Light Calcium Carbonate from LimestoneUpconversion Emission of Infrared Excited Er3+-Doped Transparent Glass Ceramics Containing CaF2 Nano-CrystalsStructuration and Fabrication of Sensors Based on LTCC (Low Temperature Co-Fired Ceramic) TechnologyFabrication of Ba-Ti-B-Si-O Glass-Ceramics for LTCCCrystallization of Cordierite-Based Glass-Ceramics Adding with Fe2O3-TiO2The Influence of Li+ on the Sintering of Cordierite Glass CeramicComposition and Properties of the LZS Glass-Ceramics Used as Anodic Bonding MaterialPreparation of SiO2-TiO2 Films of High Photo-Catalytic Activity in the Electric Field Heating-TreatmentSintering AlN Ceramics Below 1500?C with MgO-CaO-Al2O3-SiO2 Glass AdditionSynthesis of Glass Ceramic from Goldmine TailingsMethod for Estimating the Critical Cooling Rate for Glass Formation from Isothermal TTT DataEffect of Phenolic Resin on the Basic Properties of Woodceramics and Biomorphic SiC CeramicsManufacturing Process of Activated Magnesia from Bittern and DolomiteActivated Alumina Adsorbent Developed from Waste Aluminum SludgeA New Method for Effective Utilization of Melted Solid WasteDevelopment of Glass Ceramic by Sintering and Crystallization of Glass from Phosphorus SlagSialite Technology and Cycle EconomyPreparation and Characterization of Porous Cordierite Ceramics from Coal Fly AshPhoto-Catalytic Properties of Ceramic Coating of TiO2Microporous Ceramics Made by Silicon Carbide WhiskersClay Minerals as a Feasible Additive to Stabilize Cadmium in Contaminated SoilsPreparation and Photocatalytic Performance of Ag-Doped Titanium Dioxide WhiskersA Novel Hydroxyapatite Carrier for Enrichment of Hydrocarbon Degradation BacteriaPractice of Simulation to Formation of Rock TheoryEffect of Deposition Conditions on TiO2 Thin Film on Silica Glass Fibers by Liquid Phase DepositionEffects of Boron-Doped on Photocatalysis and Hydrophilicity of TiO2 FilmPreparation of Sialon from Solid Wastes by Colloidal ProcessOxidation Resistance of Mild Steels Coated with Ce4+-Modified TiO2 NanofilmsHierarchically Nanostructured Porous Functional CeramicsPreparation and Photocatalytic Property of Platinum-Modified TiO2 Ceramic Film Using Different Compound TechniquesPreparation and Photocatalytic Properties of Nanosized La3+ and Co2+ Co-Doped TiO2 by MicroemulsionsPreparation of Rare-Earth Element Doped Titanium Oxide Thin Films and Photocatalysis PropertiesInfluence of La3+ Ions on the Photo-Catalytic Activity of TiO2 Films Prepared by Micro-Plasma Oxidation MethodDispersion and Electrophoretic Deposition of Titania ParticlesPhoto-Catalytic Activity of Fe3+/Sn4+ Co-Doped Titanium Dioxide Nano-Crystalline Thin Films for Methyl Orange DegradationPreparation of TiO2/SiO2/(?-Fe2O3-SiO2) Magnetic PhotocatalystPreparation of N-Doped TiO2 Photocatalytic Paint and its Sterilization Performance under Visible-Light IrradiationFactors Influencing the Photocatalytic Efficiency in the Experimental for the TiO2 Powder Slurry SystemsPhotocatalytic Degradation of Methylene Blue Aqueous Solution under Visible Light Irradiation by Using N-Doped Titanium DioxideGrowth of TiO2 Thin Film on Glass Substrate by Air-Opened MOCVDPreparation of WOx-TiO2 and the Photocatalytic Activity under Visible IrradiationPhotocatalytic Degradation of Methyl Orange on ZnO in AqueousPhotocatalytic Properties of Nanocrystalline Tin Oxide Synthesized by Using Molten Boric Acid as a FluxEffects of Heat Treatment Temperature on the Photocatalytic Properties of TiO2 Prepared by Melt-Phase Separation ProcessEffect of CeO2 Supports on CO Oxidation Activity of Pd-Cu CatalystSynthesis and Catalytic Activity Studies of V/K/Ca and V/Ks/Ce Based Catalysts for Diesel Soot OxidationPreparation of Nanosized Ca-Zn Ferrite Particles by a Sol-Gel Method and its Magnetic PropertiesSynthesis of Bi4-xYbxTi3O12 Nanopowders by a Modified Sol-Gel ProcessSynthesis of Ce0.8Gd0.05Y0.15O1.9 NanopowdersNano-Scaled Anatase Phase Titanium Oxide Converted from Ammonium Oxotrifluorotitanate Prepared by Aqueous Solution of Ammonium Hexafluorotitanate and Boric AcidEffect of Low Frequency and Power Ultrasonic Treatment on the Surface Adsorbed Organics and Visible Light Photocatalysis Activity of Nanosized TiO2 PhotocatalystEffect of Drying Methods on Photocatalytic Activity of Nanosized Titanium DioxidePreparation of Nanosize Anatase TiO2 Powders by Hydrothermal SynthesisSynthesis of VO2 Nanocrystalline via Hydrothermal MethodSynthesis of LaMnO3 via a Mechanochemical Activated ProcessSynthesis and Characterization of Regular Hexagonal NiCo2O4 NanosheetsPreparation and Characterization of CdSe Synthesized from Non-Aqueous MediaPreparation and Characterization of CdSe Nanoparticles Prepared by Using Ultrasonic IrradiationSynthesis of Hollow Sphere CdSe from CdCl2 Aqueous Solution Containing EthylenediaminePreparation and Characterization of Gallium-Doped Zinc Oxide Nanopowders with High Electrical ConductivityPreparation of Conductive Composite Particles by Impact Coating ProcessThe Preparation of Alumina Nanopowders from Solution Derived Precipitates through Polymer Gel MethodPreparation of Nanoscale High-Purity a-Alumina PowdersEffect of Phase of YAG Powder Synthesized by Co-Precipitation on Transparent Ceramic SinteringA Novel Preparation Route of YAG:Ce via Polymer Gel PrecursorA Novel Non-Aqueous Solvent Chemical Process to Synthesize Nano-ZrO2Preparation of Pottery from ShaleEffect of Novel Bivalent Mineralizers on the Synthesis of Nano-Sized Y2O3 Doped ZrO2 Powder by Hydrothermal MethodColoring Mechanism of Pr-CeO2 Nano-Crystalline Red Lanthanide Pigments Prepared by Low-Temperature Combustion SynthesisPreparation and Thermal Decomposition Mechanism of Zn2+-Doped Mg,Al-Hydrotalcite NanocrystallinePhotoluminescence and Structural Properties of Si Nanoparticles Embedded in SiO2 Matrix by Reactive RF Magnetron SputteringPreparation and Synthetic Mechanism of Silicon Carbide Nanometer WhiskersSynthesizing Nano-Scale Titanium Nitride Powders by Solvothermal and Carbothermal MethodsPreparation and Some Properties of Ni-TiN and Ni-TiC Nanocomposite Particles by DC Arc-PlasmaSynthesis of WC Nanosized Powder by the Plasma Arc Discharge ProcessPreparation and Property of Self-Dispersed Nanometer ?-AlOOHInfluence of Ultrasonic Irradiation Power on the Synthesis Kinetics of Nano-Hydroxyapatite Prepared by a Wet Chemical ProcessEffects of Acidic Amino Acids on Hydroxyapatite MorphologySurface Nano-Particle Coating of Fly AshMicrostructure and Mechanical Properties of Silica Xerogels Doped with SiC Whisker and Short Carbon FiberPreparation of Nanocrystalline Nickel Powders by Chemical Reduction in Nonaqueous MediaPreparation and Characterization of Nano-Sized Ni Powders inside a Nonionic Polymer NetworkPreparation of Nano-Ag Particles and Antibacterial Dope Loaded SilverEffect of Dispersant on the Particle Size Distribution of Cu Powders Prepared by Wet-Reduction ProcessGrowth of Oxide Nanorod, Nanotube and Nanocable Arrays through Template-Based Sol Electrophoretic DepositionOne-Dimensional Oxide Nanomaterials through Rheological Self-AssemblingSynthesis and Electrochemical Properties of V2O5 NanostructuresCatalyst-Assisted Pyrolysis of Polymeric Precursors: A New Method to Synthesize Low-Dimensional NanomaterialsCorrosion Resistance Properties of Carbon Nanotube Reinforced Electroless Composite CoatingSelf-Assembled Monolayer of Silver Nanorods for Surface-Enhanced Raman ScatteringSynthesis and Characterization of La2(MoO4)3 Microcrystals via Hydrothermal MicroemulsionSynthesis of Yttrium Oxide Hydroxide Nitrate Nanorods by Hydrothermal MethodPreparation of PPy Nanowires and its Amperometric Response to NitrateStructural and Optical Properties of Lead Titanate Nanowires Synthesized by Hydrothermal MethodSnO2 Nanowires with Branched Structures Synthesized by Thermal Evaporation of Sn PowdersSynthesis of Sulfide Nanowire Arrays through Template-Assisted ElectrodepositionSynthesis and Characterization of Boron Carbide NanobeltsLarge-Scale Fabrication of ZnO Hexagonal Rods Arrays by a Simple Chemical Solution MethodLuminescent Properties of Aluminum Doped Zinc Oxide Nanofibers Prepared by ElectrospinningInfluence of pH on the Morphology of Yttrium Oxide Hydroxide Nitrate NanocrystalFabrication of LaNiO3 Chain-Like Ceramics from Nanocable PrecursorsPreparation and Characterization of Cerium Hydrate FiberPreparation of a Novel Carbon Nano-Material Studded Iron Granules from Needle Coke by Arc MethodSynthesis and Characterization of Refluxed Sols and TiO2 Thin Films Using TiOSO4Preparation of TiO2 Nanocrystalline Films by Electrophoretic Deposition and their Application in Dye-Sensitized Solar CellsDye-Sensitized Nanocrystalline TiO2 Ceramic Film and its Photoelectricity PropertyIn Situ Template Synthesis of TiO2 Nanotube Array FilmsAnticorrosion Behaviours of the TiO2 / WO3 Composite Photoelectrodes for 304 Stainless SteelHydrothermal Conversion Deposition of ZnFe2O4 Doped TiO2 Thin Films and their Photovoltaic ResponseThe Photo-Induced Cathodal Protection of 304SS with Graded Bandgap Ferrite/TiO2 NanostructuresMicrostructure and Resistivity of Iridium Oxide Thin Films by Pulsed Laser Deposition TechniqueEffects of Nanosized Iron Oxide with Different Morphology on Nanomechanical Properties of Nanocomposite CoatingTransparent and Compact Zinc Oxide Thin Films via Two-Step Electrodeposition from Aqueous SolutionMicrostructure and Mechanical Properties of Cr-C-N, Cr-Si-N and Cr-Si-C-N Coatings by a Hybrid Coating SystemStructure and Optical Properties of Si Films Deposited by Inductively Coupled Plasma CVD at Room TemperatureMicrostructure Control and Phase Structure Study of Porous Alumina MembraneFabrication and Characterization of the Multilayer Film Containing Polyoxometalate with Pendant Support-LigandSurface Morphology of Thin Film Deposited on Rotating Substrate by EB-PVDNanocomposites ? Toughened CeramicsMultifunctional BN/Si3N4 and TiN/Si3N4 Nanocomposites Prepared by In Situ Nitridation MethodMicrostructure and Mechanical Properties of SiC-Al2O3 Nanocomposite Prepared by Surface Modified SiC NanopowdersPreparation and Properties of Al2O3 Particle Dispersed 3Y-TZP Nanoceramics Doped with TiO2Microstructures and Multi-Toughening of ZrO2 Nano-Micron Fibers Self-Toughening Al2O3 Ceramics from In Situ Growth in the Melts Produced by Combustion SynthesisMicrostructures and Properties of Al2O3/ZrO2 Composite Ceramics from In Situ Growth in the Melts Produced by Combustion SynthesisFrom Kaolins (with Addition of Al2O3) to Mullite Composite Nanocrystals: Experiments and AnalysisSpectroscopic Study of Rod-Like Mesoporous ZnO-SiO2 CompositesRole of Amorphous Silicon Carbide in Microstructure and Mechanical Properties of nc-TiC/a-SiC Nanocomposite Coatings Prepared by PECVDPreparation and Characterization of CdSe/SiO2 Nanocomposites by Sol Gel Method and In Situ GrowthProperties of Nano-Hybrid Sol-Gel Materials Synthesized from Colloidal Silica-Silane Containing Epoxy SilanePreparation and Structural Characterization of SiO2-ZrO2 AerogelsSynthesis and Structural Characterization of SiO2-Al2O3 XerogelsInfluence of Binder Additives on the Sintering of Nano-3Y-TZPSintering Behavior of Pure and Nb-Doped BaTiO3 Powder Prepared by High-Gravity Reactive PrecipitationPreparation of MgAl2O4 Transparent Nano-Ceramics and their Light Transmission PropertiesProcessing and Properties of Nanocrystalline Tetragonal ZirconiaAnalysis of the Surface Adsorbed Organics of Nanosized TiO2 Photocatalyst with High Visible-Light Photocatalysis Activity by Ultrasonic Treatment under Water and Ethanol SolutionLow-Temperature Synthesis and Micro-Morphology Observation of Transparent MgAl2O4 Nano-CeramicsEvaluation of a Shoe Cushioning System Using Shock Absorber by BiomechanicsPhase Transformation Behavior of ZrO2-TiO2 Thin Films in Electric FieldPhase-Transformation Kinetics of TiO2 in TiO2/(O'+?')-Sialon Multi-Phase CeramicsEffect of Er3+ Doping on Crystallization of PbF2-SiO2 Based Bulk XerogelsPhase Evolutions of High Energy Ball Milled Ni-66.7at% SiThermal Expansion Behavior of Solid Solution Y1.9R0.1Mo4O15 (R = Sm, Nd, Dy)Thermal Expansion Coefficients of Sm2Zr2O7 Doped with MgOImproved Stability of Mn-Doped WO3 Varistor via Doping Cr2O3Effect of the Addition of Ti3+ into TiO2 Film on the Performance of Dye Sensitized Solar CellsReaction Process of Al-TiO2-C-Ti-Fe Multiphase System during Combustion SynthesisSintering Behavior of Fe-Si Composite Powder by DPR TechniqueReaction Process of Al2(1-x)MgxTi1+xO5 Composite Powder by Chemical Co-Precipitation and Subsequent SinteringPreparation and Investigation of TiO2 Sol Containing Nanometer Anatase Crystalline GrainsPressure Sensitivity of SiC/Cu Composites Prepared by SPSSintering Kinetic of Fine a-Alumina Powder with ZrO2 ImpurityOn the Grain Size Distribution of MnO Doped ZnO CeramicsEffect of Sintering Process on Microstructure of Al2O3/LiTaO3 Composite CeramicsKinetics Model for the Initial Stage of Spark Plasma SinteringStudy on the Critical Time and Diffusion Coefficient in Grain-Boundary Segregation of PhosphorusFabrication of Highly Microstructure Controlled Ceramics by Novel Colloidal ProcessingShrinkages during from Liquid to Solid in Colloidal FormingSuspension Characteristics and Rheological Properties of Aqueous Alumina/Zirconia Freeze Casting SlurriesThe Stability of TZP-YSZ Binary SuspensionsSilicon Nitride Ceramic Prepared by Colloidal ProcessMechanical Properties of Filler Metal in Si3N4/Austenitic Stainless Steel/Si3N4 Joints as Measured by Nanoindentation and its Relationship to the Interfacial StrengthJoining of SiC Ceramic by High Temperature Brazing Using Ni-Cr-SiC Powders as FillerJoining of SiC Ceramic by Hot Pressing Reaction Joining Process Using Ni-51Cr Powders as FillerFractal Dimension of Al(OH)3 Particle and Fractal Simulation of Boundary Micro-TopographyEvaluating Mechanical Properties of Ceramics by Relative MethodsThe Compressive Strength of Ceramic MicrobeadsSpherical Indentation on Glass-Coated Al2TiO5-Mullite CompositesIndentation Fracture Toughness and Hardness of Solid Oxide Fuel Cell Electrolyte MaterialDescription of the Nanoindentation Unloading Behavior of Brittle Ceramics with a Modified SurfaceCyclic Fatigue of Alumina Ceramics as Evaluated by Modified Small Punch TestsDynamic Fatigue of Y-TZP Ceramics at the Room TemperatureCracking Stress of Nano-Fibers Composite CeramicsExperimental Study of Micro Displacement Field of Microstate of Crack Tips of Ceramics Plasticized with Zirconia and Stabilized by Yttrium Oxide ? Application of Digital Image Correlation Method Based on Analysis by Scanning Electron MicroscopeLower and Upper Bounds of Mechanical and Thermal Properties of Ceramic/Metal CompositesFracture Enhancement of Mixed Mode I-II Transformation Toughened CeramicsCrack Healing, Reopening and Thermal Expansion Behavior of Al2TiO5 Ceramics at High TemperatureCorrosion Resistance of the Ceramic Coating Formed by Micro-Plasma Arc Oxidation on AZ91D AlloyInfluences of Duty Ratio on Structure and Corrosion Resistance of Ceramic Coatings on Ti-6Al-4V by Micro-Plasma Oxidation
Preparation and Wet Erosive Wear Characteristics of Porous Al2O3 CeramicsErosive Wear Performance and Mechanism of Engineering Ceramic MaterialsErosion Wear Characteristics and Mechanism of Si3N4 Ceramics: Effect of Impact AngleEffect of Testing Parameters on Wear Properties of Alumina Strengthen 3Y-TZP CeramicsDry Friction Behaviour of Reaction-Bonded Silicon Carbide at High TemperatureWear Mechanism of Ceramic Microbeads as Grinding MediaOxidation Behavior and Mechanical Property of Si3N4 Ceramics with Rare Earth Oxide AdditionInfluences of Calcination Ambiences on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti?6Al?4V Alloy by Micro-Plasma OxidationGeometric Design of Cycloidal Drives with Ceramic Ball Meshing ElementsDesign of Ceramic Composite Based on the Impact Resistance and its Machining ApplicationParallel Simulation of Ceramic Grain Growth on the Platform of MPIQuantitative Evaluation for New Bone Growth of Bone Repairing Biomaterial Based on Color Image SegmentationApplication of Improved BP Neural Network in the Preparation Processing of the SrTiO3 NanocrystallineFinite Element Method for Thermal Analysis and Ablative Calculation of Heat Protection MaterialsLifetime Control and Prediction of ZrO2/CePO4 CompositesFirst-Principles Study of Nonmetal-Doped Titanium OxidesFirst Principle Study on Electronic Structure of Nanocrystalline BaTiO3 CeramicsA Method to Evaluate the Elastic Properties of Ceramics-Enhanced Composites Undertaking Interfacial DelaminationFirst-Principles Calculations on Crystal Structure and Thermodynamic Properties of CeramicsAdsorption of the Au Atom on Si(001) SurfaceArea-Perimeter Relation of the Grains in Stabilized Cubic ZirconiaEffective Stiffness of Nano and Transformation Composite CeramicsLambdoidal Layup of Aragonite Sheets in Conch ShellSerial Simulation of Ceramic Grain Growth Based on Ternary-Tree Structure and Space PartitionElectronic Structure Study of Ni/Al2O3/Ni from First-PrinciplesAssessment of the Surface Morphology of Diamond Film Based on FractalEffects of Ceramic Fillers on Light Reflectance and Arc Resistance of PTFE for Circuit BreakerPreparation of Yellow Color Pearlescent Pigments of CeO2-MicaStudy of Carbonizing Processes for Sintered DolomitePreliminary Analysis of the Citations to Articles Published in Two Academic JournalsGrain Characteristics of Nanocrystalline ZrO2 PowdersAnalysis of Capacity to Make Profits in Chinese Listed Ceramic CompaniesStructural Micro-Layered Ceramics with Surfaces under Tension and Compression with Increasing Apparent Fracture ToughnessResearch on Morphology and Phase Structure of Al/Cu Interfaces Formed by Explosive CladdingFabrication of Layered Ti3SiC2/a-SiAlON MaterialMicrostructure and Optical Characterization of Au/SiO2 Nano-Composite Multilayer FilmsZrO2-Ni Functional Gradient Bonding InterlayerMicrostructure and Mechanical Properties of Freeze Cast Alumina/Silicon Carbide Layered CompositesMechanical and Electrical Properties of Boron-Oxygen-Nitrogen Film as Buffer LayerCharacteristics of Surfactant-Zirconium Phosphate Composites with Expanded Interlayer SeparationResistance of the Transitional Region of Laser-Clad Coating on Electrolytic Low Titanium Aluminium Alloys to Multiple Impact LoadingDevelopment of Functionally Structured Materials: Ceramic Photonic Crystals and FractalsFunctionally Graded Thermoelectric MaterialsMicrostructure and Properties of WCP Reinforced Ferrous Gradient CompositesFunctionally Graded Piezoelectric Ceramics for Ultrasonic TransducersPreparation of Functionally Graded Cu/AlN/Cu Electrode Materials for Thermoelectric DevicesA New Silver-Based Graded Composite as Electrical Contact MaterialBending Behavior of Functionally Graded Piezoelectric Laminated Actuators under Electric FieldsThermal Shock Behavior of Nano-Structured Functionally Graded Thermal Barrier Coatings Deposited by Supersonic Plasma SprayNumerical Simulation Method of Heat-Resistant Hetergeneous Graded Ceramics Structure on VehicleExperimental Study and Modeling of a Differential SMA Spring ActuatorMicrostructure and Dielectric Properties of LiTiNiO Thin FilmsEffect of Ti Content on Microstructure and Dielectric Properties of Li and Ti Co-Doped NiO Thin FilmsFabrication and Characterization of Ceramic/Metal Gradient Thermal Barrier CoatingMicrostructure and Corrosion Behaviour of Ni/Al-Al2O3 Gradient Ceramic Coatings on Q235 SteelMacro-Residual Stress in 304 Stainless Steel Coated with ZrO2-CeO2 Thin Films by Sol-Gel ProcessXPS Studies on Composite ZrO2-CeO2 Thin Films Deposited on Metal Substrate by Sol-GelPreparation of Copper Particles Coated with Amorphous TitaniaInterfacial Cracks Control of Y-TZP/Stainless Steel FGM Fabricated by Slip CastingSurface Aluminizing and Internal Oxidation of Cu-Al-Y Alloy
