Sonstiges, Englisch, 2000 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 2000 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908453-96-3
Verlag: Trans Tech Publications
This special volume presents, discusses and reviews the latest advances in the science and technology of high-performance ceramics. The editors received more than 700 contributions from which, following a strict peer-review process, more than 598 manuscripts were chosen for inclusion in this collection.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Luminescence Sensing of Temperature in OxidesInvestigation on the Effects of Zn on PbTiO3Preparation and Characterization of (1-x)BiScO3-xPbTiO3 Ceramics by Two-Step SinteringInfluence of Varying the Powder Loading Content on the Homogeneity and Properties of Extruded PZT-FibersEffect of PbO Concentration on the Templated Grain Growth of PMN-32.5PT CeramicsPulsed Power Supply of Ferroelectric Ceramics by Shock-Induced DepolingElectrical Behavior of PSZT Ferroelectric Ceramic under Shock Wave CompressionPreparation and Characterization of Relaxor-Based Ferroelectric Thick Films with Single Perovskite StructureFabrication of Spark Plasma Sintering on Pb(Mg1/3Nb2/3)O3?PbTiO3 Ceramics Layers Prepared by Tape Casting and TGG MethodPreparation and Characterization of Perovskite Pb(Mg1/3Nb2/3)O3-PbTiO3 by a Modified Polymerized Complex ProcessCharacterization of the Bismuth-Based Piezoelectric Ceramic System (1-x)Bi(Mg1/2Zr1/2)O3-xPbTiO3Preparation of Mg and Ti Co-Doped NiO-Based Ceramic and its High Dielectric PropertiesLiquid Phase Sintering of Barium Titanate Ceramics for High Energy Density CapacitorsEffects of Processing on Microstructure and Dielectric Properties of Ultrafine- Grained Barium Titanate Based Ceramics for BME-MLCC ApplicationsSynthesis, Characterization and Electrical Properties of Barium Titanate Films Fabricated by Hydrothermal MethodPreparation of Barium Strontium Titanate Nanopowders by a Sol-Gel Hydrothermal Synthesis MethodLow Temperature Hydrothermal Synthesis and Sintering of Ba0.6Sr0.4TiO3Effect of Annealing Temperature on the Microstructure of Barium Strontium Titanate FilmsMicrostructure and Dielectric Properties of Ba0.5Sr0.5TiO3 Ceramics by Spark Plasma SinteringDielectric Behavior of (1-X)BaTiO3-XCaCu2.94Mn0.06Ti4O12 Composite CeramicsInfluence of Excess Bi2O3 on the Characteristics of (Na0.5Bi0.5)TiO3-BaTiO3 CeramicsEffects of Mn-Doping on the Piezoelectric and Ferroelectric Properties of (Na0.8K0.2)0.5Bi0.5TiO3 CeramicsEffects of Mn Doping on Dielectric Properties of BSTN CeramicsElectrical and Physical Characteristics of Ba(Zr0.1Ti0.9)O3 Thin Films under Oxygen Plasma Treatment for Nonvolatile Memory Devices ApplicationNano-Precipitation in SrTiO3-Based Functional CeramicsElectrical Characterization and Microstructures of Tb-Doped Bi4Ti3O12 Thin FilmsCation Distribution and Structural Instability in Pr-Doped Bi4Ti3O12Electrical Characteristics and Microstructures of (Gd, Dy)-Doped Bi4Ti3O12 CeramicsElectrical Characteristics and Microstructures of Ce-Doped Bi4Ti3O12 FilmsEffect of Tb Substitution on Electrical Characteristics and Microstructures of Bismuth Titanate CeramicsPreparation and Dielectric Properties of the Layered Perovskite Sr4Bi4Ti7O24 Ferroelectric CeramicsFerroelectric Properties of Sol-Gel Derived Ca1-xSrxBi4Ti4O15 Thin FilmsSynthesis of Nanocrystalline 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 Powder by a Citrate MethodProcessing and Properties of Ferroelectric Bi4-x La xTi3O12 CeramicsBi4-xLaxTi3O12 Ferroelectric Thin Films Prepared by RF Magnetron SputteringPreparation and Magnetic Property of Bi2Fe4O9 Nanoparticles by Hydrothermal MethodMolten Salt Synthesis of CaCu3Ti4O12Effects of the Replacement of Ti by Zr on the Dielectric Properties of CaCu3Ti4012 CeramicsEffects of CuO on the Preparation, Microstructure and Dielectric Response of CaCu3Ti4O12Preparation and Characterization of CaCu3Ti4O12 Ceramics by Cold Isostatic Press FormingPreparation and Properties of CaCu3Ti4O12 Thick Film by Aerosol Deposition MethodDielectric Properties of Zr-Doped CaCu3Ti4O12 CeramicsLow-Temperature Sintering of Ba5(Nb1-xVx)4O15 Ceramics with H3BO3The Characteristics of Ferroelectric Sr0.4Ba0.6Nb2-xVxO6 DielectricsPreparation and Morphological Controlling of Nanophase NaNbO3 by Sol-Gel MethodDifference in Ordering Ability Between Ca(Al1/2Nb1/2)O3 and Ca(Fe1/2Nb1/2)O3Synthesis of (1?x) CaTiO3?xNdAlO3 Ceramic Powder via Ethylenediaminetetraacetic Acid PrecursorDC and AC Electrical Properties of Sr2-xLixFeMnO6 CompoundMicrowave Dielectric Ceramics and Devices for Wireless TechnologiesTailoring of the Dielectric Properties of Some Low Sintering Temperature CeramicsSintering and Microwave Dielectric Characteristics of ZnTa2-xxNbxO6 CeramicsPreparation and Characterization of Citrate Sol-Gel Derived CaLa4Ti4O15 Microwave Dielectric CeramicsLow Temperature Sintering Ba3Ti5Nb6O28 Ceramics with Tunable Temperature Coefficient of Dielectric ConstantPreparation and Dielectric Properties of BaO-Sm2O3-4TiO2 Microwave Ceramics with B2O3 and CuO Addition Sintered in Low TemperatureLow Temperature Sinter-Ability of Microwave Dielectric Ceramics 0.4(Ca0.61Nd0.26)TiO3-0.6(Li0.5Sm0.5)TiO3Low Temperature Sintering and Microwave Dielectric Properties of Zinc Titanate Ceramics for LTCC ApplicationsChange of Microwave Dielectric Loss during the Solid-Reaction Synthesis of SrFeCo0.5OyStructure and Microwave Properties of NaxCa1-xAl2-xSi2+xO8 (0 < x < 0.67) Plagioclase FeldsparMicrowave Characteristics of ZnO-Doped CeO2 Dielectric ResonatorsSynthesis of Cordierite Powders by Low Temperature Combustion MethodAutomatic Multimode Measurement for Microwave CeramicsAccurate FEM/BEM Simulation of Wireless Passive Surface Acoustic Wave SensorsA Micro Piezoelectric Motor with a Disk-Pivot StructureUltrasonic Linear Motor with a High Stiffness Support Mechanism for Precision ControlA Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric CeramicsA Considering Method of Density Distribution Factor for the Ceramic Motor with Soft Magnetic Composite CoreA Piezoelectric Micropump Based on MEMS FabricationFinite Element Analysis and Design of Monolithic Multilayer Piezoelectric MicromanipulatorA Novel Piezoelectric NebulizerFabrication of Piezoelectric Cantilever Beam Based on Nanostructured PZT FilmMagnitude Versus Frequency Performance of Vibration Acceleration Sensor Based on Cymbal TransducerEffects of the Top-Electrode Annealing on the Ferroelectric Properties of BiFeO3 Thin FilmsElectrical Characteristics of Fluorine Passivated MOCVD-TiO2 Film on (NH4)2Sx Treated GaAsInterfacial Behavior of SiC-Based Boundary Layer CapacitorsMicrowave Sintering of YSZ Electrolyte Materials for SOFCProperties of YSZ Electrolyte Sintered at 1250?CFabrication and Conductivities of CeO2-Based Oxygen-Ion Conductors Doped by M2O3 (M=La, Nd, Sm and/or Ga)Synthesis of Nanocrystalline Ce0.8Sm0.2O1.9 by Citrate Gel MethodElectrical Conductivity of Ceria Co-Doped with Zr and Re (Re=La,Y)Low-Temperature Combustion Synthesis and Characterization of Ce1-xPrxO2-d Solid SolutionsEffect of Moisture on Chemical Stability and Hydrogen Permeability of Ni-BaCe0.9Y0.1O3-d CermetPreparation of SrFe0.6Cu0.3Ti0.1O3-d Mixed Oxygen-Ionic and Electronic ConductorLimiting Current Oxygen Sensors with LSM as Dense Diffusion BarrierNovel Mg Sensors for Application in Molten AlPreparation and Characterization of Gd1-xSrxCoO3-dTransformation from Monoclinic LiMnO2 to Spinel LixMn2O4 during Electrochemical Cycling Effect of Mn?Doping Content on the Microstructure and Crystallite Size of LiNi0.85-xCo0.15MnxO2 Cathode MaterialsStructural Studies on Ceria-Carbonate Composite ElectrolytesPreparation and Structural Characterization of a Needlelike Carbon from the Refined Coal Tar PitchFabrication of Ni-Based Anode Supported SOFCs by Aqueous Tape CastingManufacture of Electrolyte Component of SOFCRate Capability Fade of 18650 Li-Ion CellsSolution Combustion Synthesis of LiMn2O4 with Different Starting Reactant CompositionsEffects of Fuel Content and Calcination Procedure on Phase Composition and Microstructure of LiMn2O4 Prepared by Solution Combustion SynthesisEffect of Heating Time on the Structural and Electrochemical Properties of LiFePO4 by Molten Salt MethodEffect of Annealing on Laser-Ablated K3Li2-xNb5+xO15+2x Thin FilmsStructure and Optical Properties of SrBi2Nb2O9 Thin Films Fabricated by Pulsed Laser DepositionPulsed Laser Deposition and Characterization of InZnO Alloyed Thin FilmInfluence of Mechanical Milling and Annealing Atmosphere on the Photoluminescence Properties of ZnS:Cu,Cl PhosphorsEffect of Doping Mode on the Photoluminescence Property of CaS:Eu PhosphorUltraviolet Photoluminescence on Nano-Crystalline 6H-SiCGallium and Nitrogen Co-Doped ZnO Thin Films by Pulsed Laser DepositionSynthesis and Characterization of AZO Thin Films by Sol-Gel Process: The Influences of Precursors and DopantsPreparation and Spectral Properties of PVP-Modified ZnO NanorodsPreparation of Sm2O3 Optical Thin Film by Hydrothermal ProcessPhotochromic Properties of WO3 Thin filmsEffects of Microstructure and Relative Density on the Dielectric Constant of Porous SilicaPreparation and Characterization of Porous Silica Obtained by Hydrochloric Acid Selective Leaching MetakaoliniteManganite-Based Heterojunction Position-Sensitive DetectorsOptical Scattering Mechanisms of Functional Nano-Material Films on Transmission Display Screen Development of A Novel Elasticoluminescent Material with Calcium AluminosilicateElastico-Luminescent Nanoparticles Prepared via Polymer-Coated Precursor Formed in Reverse MicellesBlue-Greenish Light Emission from Stress-Activated SrCaMgSi2O7:EuLuminescence Property of Eu2+ Doped Strontium Silicate Yellow Phosphor for White Light Emitting DiodeVUV Spectral Properties of MBPO7 Co-Doped with Tm3+ ,Gd3+Luminescence Properties of LnZr(BO3)2:Re (Ln=Ba, Sr; Re=Eu, Ce,Tb)Luminescent Properties of Re2SiO4:Tm3+ (Re=Mg,Ba,Sr) Under VUVPreparation and Luminescent Properties of Zn2SiO4:Mn2+Sol-Gel Deposition and Luminescence Properties of Spherical Phosphors Ca2Y8(SiO4)6O2:Eu3+Preparation and Luminescent Properties of SrAl2O4:Eu2+,Dy3+Preparation and Characterization of SrAl2O4: Eu,Dy PowdersSynthesis of Ultrafine GSAG:Ce Phosphor by Solution CombustionFabrication and Luminescence Properties of Y2SiWO8:Dy3+ Phosphors via Sol-Gel ProcessSynthesis and Properties of Ca0.85(W1-xMox)O4:Eu0.15 Rare Earth PhosphorsPreparation of Upconversion Luminescent NaYF4 Co-Doped with Yb3+/Er3+ via Hydrothermal SynthesisEnhancement of Blue Emission via Upconversion in Solid-State Synthesized Hexagonal NaYF4:Ln3+Preparation and Characterization of Transparent Nanocrystalline CeramicsSynthesis of Ultrafine MgAl2O4 Powders by Nitrate-Citrate Sol-Gel Combustion ProcessPreparation and Growth Mechanism of Hexagonal MgAl2O4 Spinel FibersDielectric Properties of MgAl2O4 Transparent Nano-CeramicHighly doped Mn:MgAl2O4 Transparent CeramicsOptical Properties and Microstructure of Mn: MgAl2O4 Transparent Ceramic after HIP TreatmentFabrication of High Transparent YAG Ceramics by Vacuum Sintering at Low TemperatureSinterability of Nd:YAG Powder Prepared by Alcohol-Water Co-Precipitation MethodSintering of Transparent Polycrystal Nd:YAG with MgO as AdditiveYAG:Ce3+ Nanopowders: Synthesis, Characteristics and Luminescent PropertiesPreparation of Transparent Nd:Gd2O3-HfO2 CeramicPreparation of Aluminum Oxynitride Powder by Solid State Reaction MethodInfluence of Raw Materials on the Carbothermal Synthesis of Single-Phase Aluminum Oxynitride PowderA New Method for the Preparation of Transparent AlON CeramicPreparation of Transparent AlON Ceramics Using Single-Phase Powder Obtained from Carbothermal ReductionPreparation of Transparent AlON Ceramics Using Powder Synthesized from Nano-Sized Al2O3 and AlNHot-Pressed Translucent Aluminum Oxynitride (AlON) CeramicsNanopowder and Fine-Grained Ceramics for Multilayer PTCR ElementsMicrostructure and Electrical Properties of BaTiO3-Based PTC Ceramics Prepared from NanopowdersPreparation of Bi-Based High Curie Temperature PTCR CeramicInfluence of Liquid Phase on Grain Growth of Ba0.998La0.002TiO3 CeramicsInfluence of Rare Earth on the Electrical Properties and Microstructure of Barium Titanate CeramicsFabrication of BaTiO3-Based Semiconducting Ceramic Thick Films by Aqueous Tape CastingOne-Step Electrodeposition of CIGS Thin Films from Alcohol Solution on Flexible SubstratePreparation of ZnO Nanopowder by Chemical Liquid-Phase Method with Polyethylene Glycol AdditivesRoles of Dopants in Sintering Behavior of ZnO-Based VaristorCorrective Effect of Average Grain Size on Grain Boundary Number of ZnO VaristorsModification of Electrical Properties of T-ZnO Whisker by Doping FeInfluences of Twin Boundaries on Microstructural Characteristics of ZnO Varistors Simulated by Voronoi NetworkThe Nonlinear Characteristics of Different Additives Added V2O5-ZnO VaristorEffect of B2O3 Doping on the Microstructure and Electrical Properties of ZnO-Based VaristorsInfluence of Pr6O11 on the Characteristics and Microstructure of Zinc VaristorsInfluences of Dopants on the Microstructural Nonuniformity of ZnO VaristorsEffect of Ho2O3 Doping on Performance of ZnO VaristorA New Model for Simulating AC and Surge Properties of ZnO Varistors Based on Microstructural Characteristics Properties of ZnO Varistors Prepared with Nano-Sized PowdersInvestigation of Electron Traps in SnO2 Based Varistor CeramicsNanocrystalline Tin Oxide Thick-Film Gas Sensor for H2S DetectionCo-Doped Tin Oxide Thin Films by Spin CoatingSynthesis of TiO2 Nanotube Arrays Through Multistep AnodizationSelf-Organized High Aspect Ratios Titanium Oxide Nanotube Arrays Prepared by AnodizationFabrication of Mn2O3 Nanowire with Ultra Fine Morphology via an Electrospinning TechnologyXPS Research on SrTiO3-Based Voltage-Sensitive MaterialThermoelectric Properties of Bi2Te3 Alloy Prepared by Mechanical Alloying and Spark Plasma SinteringPreparation of Bi2Te3 Nano-Powders via an Aqueous Chemical MethodEffect of Dopant on N-Type Bi2Te2.7Se0.3 Thermoelectric Materials Fabricated by Spark Plasma SinteringThermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone MeltingPreparation and Thermoelectric Properties of AgPb18SbTe20 Materials via Hydrothermal Synthesis MethodSynthesis and Thermoelectric Properties of Ba8Ga16+xSbxGe30-2x (x=0,1) Clathrate Single CrystalsPreparation of Nanosized La2CuO4 Particle by Chemical Precipitation Method and its Thermoelectrical PropertiesPreparation and Thermoelectric Properties of (Ca1-x-yKxBiy)3Co4O9 CeramicPreparation and Thermoelectric Properties of Al2O3-Doped ZnO CeramicsDipole Cluster State and Dielectric Relaxation in Relaxor FerroelectricsProperties and Numerical Simulation of Electromagnetic Meta-Materials (SRR) Based on Ceramic SubstrateCofiring Behavior of Ferroelectric Ferromagnetic CompositesMicrowave-Assisted Synthesis of Hexagonal Barium Ferrite Powders with Nano-ParticleHydrothermal Synthesis of Sodium-Potassium Niobate NanopowdersSynthesis of YIG Nanopowders by Sol-Gel MethodMagnetic and Dielectric Properties of BST-YIG CompositesSolid Phase Synthesis and Sintering Properties of Yttrium Iron GarnetComplex Permeability Spectra of Co-Substituted Lithium Zinc Perminvar FerriteSynthesis, Microstructure and Magnetic Properties of Nanocrystalline Ni-Zn Ferrite by a Modified Wet Chemical MethodInfluence of Different Calcination Conditions on the Microstructure and Phase Constitution of Nickel-Zinc Ferrite Nanocrystalline Powders Prepared by a Sol-Gel Auto-Combustion MethodPreparation and Magnetic Properties of Dense NiCuZn Ferrite by Spark Plasma SinteringSynthesis, Characterization and Magnetism of Nanosized Copper FerritePreparation of Nanosized Barium Ferrite Spinel by a Sonochemical MethodNano-Crystalline Barium Hexaferrite Powders Prepared by Mechanical Alloying Using Acetate PrecursorEffect of the Combination of HTR and NTR Processes on the Magnetic Properties of Strontium HexaferritePreparation and Characterization of Nanometer Iron Oxide by Sol-Gel Method and Supercritical Fluid Drying TechnologyPreparation of Zn1-xCoxO Diluted Magnetic Semiconductor by Hydrothermal MethodLow Temperature Synthesis of BiFO3 Film by Hydrothermal MethodStructure and Magnetic Properties of BaLa0.5Fe11.5O19/ SiO2Electromagnetic Property of MnZn Ferrite/SrTiO3/PTFE CompositesStructure of Gd(5-x)HoxSi4 Solid SolutionsSynthesis of Y2BaCuO5 Nanopowder by Co-Precipitation under Ultrasonic IrradiationEffect of Pre-Treatment on the Microstructure and Superconducting Properties of Bi-2223/Ag TapesEffect of Lead Oxide Compounds on the Microstructure and Properties of Bi-2223/Ag TapesStudy on the Opening and Modifying of MWNTsSynthesis and Hydrogen Storage Capacity of SiC NanotubeField Emission Characteristics of Orthorhombic Boron Nitride FilmsElectrical Properties of Sb-Doped BaPbO3 CeramicsAn Aqueous Photocrosslinkable Chitosan-PVA (Polyvinyl Alcohol) Binder for Tapecasting Alumina SubstratesDielectric Performance of Alumina Ceramics Sintered at Different TemperaturesSynthesis of CuFeO2 Powder by Sol-Gel MethodP-Type Transparent Conductivity of Cu1-xAlS2 (x = 0 ~ 0.08)A Novel Temperature Induced Gelation Forming MethodFormation of Regular Hexagonal Dislocation Network in Chemical-Furnace Sintered AluminaPhase Transition Activity Characteristics of Nanosized AlOOH in the Hydrothermal Synthesis of Nanosized a-Al2O3Rheological Behavior of Modified Starch-Alumina Oxide SuspensionsPreparation of High-Purity Ultrafine a-Al2O3 by Solid-State Reaction at Room TemperatureOn the Sintering Activation Energy of a-Al2O3Control of Ceramic Material Microstructure with Super High Magnetic FieldSynthesis Processes of Nano Alumina AbrasiveEffects of Rare Earth Oxides on the Microstructure and the Mechanical Properties of High-Purity Alumina Ceramics Sintered at Low TemperatureControlling Porosity and Pore Size Distribution of Alumina Ceramics in Consolidation Forming Process Using Modified StarchesElectro-Mechanical and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina CompositesInfluence of Processing Parameters on Manufacturing Al2O3 Parts by Extrusion Gelation Freeform FabricationStudy on Alumina Ceramics for Dechlorinating Reactor LiningMullite Fiber Reinforced Alumina Ceramic Matrix CompositesExperimental and Numerical Researches of Dynamic Failure of a High Strength Alumina/Boride Ceramic CompositeMechanical Properties and Microstructure of Al2O3/(W, Ti)C NanocompositeTiN/Al2O3 Composite Material Synthesized by Aluminothermic Reduction Process in Reductive AtmosphereProperties of In Situ Synthesized Alumina Ceramic Core CompositesPrecision Grinding of Concave Spherical Surface of High-AluminaInfluence of Cosurfactant on the Structure and Properties of ZrO2 Nano-Powders Prepared in Microemulsion SystemWater Debinding for Zirconia Powder Injection MoldingKinetics for Supercritical CO2 Debinding of Injection Molded ZrO2Rheological Properties and Gelcasting Behavior of Ultrafine ZrO2 SuspensionWear Properties of Y-TZP Ceramics Dispersed with Second Phase ParticlesLow Temperature Sintered CaTiSiO5-CaTiO3 Dielectric Ceramics Doped by 2ZnO-B2O3Phase Composition, Mechanical and Thermal Properties of (MgO)0.1-x(YO1.5)x(ZrO2)0.9 and (MgO)0.1-x(CaO)x(ZrO2)0.9 CeramicsLow Temperature Synthesis and Characterization of CaO and MgO- Stabilized Nanocrystalline Tetragonal Zirconia by Citrate Gel ProcessFabrication of Porous Zirconia Ceramics by Injection Molding MethodPreparation and Characterization of Zirconia-Based Multi-Phase NanocompositeEffect of Temperature on the Synthesis of ZrO2-Mullite Powders in Molten Sodium SulfateEffects of Substitution SiC for SiO2 on Microwave Heating of ZrO2-Al2O3-SiO2 System CompositesMicrostructures, Properties and In Situ Toughening of Rapidly Solidified Al2O3/YSZ Composite Ceramics Prepared by Combustion SynthesisPreparation of SiCw/3Y-ZrO2/Al2O3 CompositesPreparation and Performance of AlN-ZrO2 Multiphase MaterialPreparation and Characterization of Pr-CeO2 Nano-Powders by Co-Precipitation-Hydrothermal MethodInfluence of Preparation Temperature on Performance of Ce1-xPrxO2 Ultrafine Powder Prepared by a Microemulsion ProcessPreparation and Characterization of SiO2 Nanoparticles by Microemulsion MethodFabrication of the Monolithic Silica Aerogels Using Sodium Silicate and its Network StrengtheningPreparation of Silicon Dioxide Fiber via Sol-Gel ProcessSynthesis of Core@Shell Composites with Gold Nanoparticles Trapped inside Ceramic Silica Shells by the Sol-Gel MethodEffect of Heat Treatment on the Microstructure of TiO2 Nanofibers Prepared by Refluxing in Basic SolutionSynthesis of Mullite Nanocomposite from Natural KaolinHydrothermal Synthesis of Nanosized Mullite PowdersPreparation and Structure Characterization of Mullite Fiber Porous CeramicCatalyst-Free Synthesis of Mullite NanosticksMicrostructure and Mechanical Properties of Mullite Composites via Pressure Molding and by Oxidation of an Al-Si Alloy PowderA Novel SiC Precursor with High Ceramic Yield: Antimony-Substituted Polysilane (APS)Preparation of Ultrafine SiC Powders by Carbothermal ReductionSynthesis of Silicon Carbide Platelets by Double-Heating TechniquePreparation and Properties of SiC Fibers Containing Yttrium and AluminumSynthesis of Silicon Carbide Whiskers in Electric Field FurnacePreparation of RBSC Green Bodies by Gel-CastingTranspirational Performance of Oriented Porous SiC Transpiration Cooling MaterialsHigh Porosity SiC Ceramics with a Narrow Pore Size DistributionSiC Micro-Threads Prepared within the Carbon Fiber FeltEffects of Deposition Temperature on the Growth Characteristics of CVD SiC CoatingsMicrostructure and Mechanical Properties of C/SiC Composites Prepared at Low TemperaturesProperties of SiC/Fe Composites Prepared by Coating Process and Powder Metallurgy MethodSurface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Comparison of As-Received PowdersSelective Laser Sintering of Si3N4 and Al2O3 Ceramic PowdersProperties of Mechanical Activation Combustion Synthesied High a-Content Silicon Nitride Powders and Sintered Bulk Ceramics after Iteration ReactionsCombustion Synthesis of ?-Si3N4 and ?-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO3 and NH4FSynthesizing Silicon Nitride Whiskers by Solvothermal and Carbothermal MethodsTexturing of Si3N4 Ceramics via Strong Magnetic Field AlignmentFabrication of Thick Silicon Nitride Substrates by Tape CastingEffects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal ReductionPreparation of Si3N4 Ceramics by Aligning a-Si3N4 WhiskersOxidation and Corrosion of Silicon Nitride at 1200?C and 1500?CSynthesis of Rod-Like a-SiAlON by Carbothermal Reduction-NitridationOptimization of a-SiAlON Microstructure by Heat TreatmentAbrasive Erosion Comparison for a Ceramics and a High Chrome Cast Iron Applied in a Slurry PumpPreparation of In Situ Synthesized SiC Particles Reinforced Highly Porous Si3N4 Ceramics by Gel-CastingSurface Oxidation of Carbon Fiber and its Influence on the Properties of Carbon Fiber Reinforced BN-Si3N4 CompositesSintering Temperature Study of Hot-Pressed Y-SiAlON CeramicsMulti-Step Sintering Method Study of HP Y-SiAlON CeramicsPreparation of ?-Sialon from Fly Ash by Carbothermal Reduction-Nitridation ReactionSi3N4-BN-SiO2 Based Microwave-Transparent MaterialsWear Property of Superfine Grained Si2N2O-Si3N4 CompositesPreparation of SiOC Foam Ceramics Using PolysiloxaneFabrication of MgSiN2 Powders via Combustion Synthesis ProcessPreparation of SiBCN Microtubes from Melt-Spinnable PolymersLayer Structure Growth of Orthorhombic Boron Nitride Thin Films by RF-PEPLDPreparation of Microcrystalline CBN AbrasiveProperty and Microstructure of Machinable B4C/BN NanocompositesSpark Plasma Sintered AlN-BN Composites and its Dielectric PropertiesMicro Pattern Making Method on AlN-hBN Composites Using Powder Blasting ProcessMachining Characteristics of AlN-hBN Composites in End-Milling and Precision Lapping ProcessesSynthesis of SiCW/(Mo,W)Si2 Composite by the "Chemical Oven" Self-Propagating Combustion MethodMicrostructure Change of Molybdenum Disilicide Heating Unit in Nitrogen Atmosphere at 1700?CSintering and Properties of MoSi2 Matrix Composites Reinforced by Carbon NanotubesWear Behaviors of MoSi2 at Elevated TemperaturesPreparation of Titanium Diboride Reticulated Porous CeramicsInfluence of Microwave Sintering Environment on the Preparation of AlN Powder and CeramicDensification of Aluminum Nitride Ceramics with CaF2 AdditiveMicrostructure and Properties of AlN Matrix Composites Fabricated by Reaction SynthesisMicrostructure and Phase Composition of AlN/Al Composite Fabricated by Directed Melt NitridationAblation Performance and Surface Texture of the Nitride Composites Reinforced by the Braided Silica FibersFabrication of High-Content Ti3AlC2 Powders by Mechanical AlloyingMapping of Composition, Phase Transitions and Properties in Oxidized Ti3SiC2Preparation of Composites from Al and Ti3AlC2 and its Tribo-Chemistry Reactions against Low Carbon SteelSynthesis, Structure and Properties of Ti3(SixAl1-x)C2 Solid SolutionsSynthesis of Ti3Si0.4Al0.8C1.8 Solid SolutionPressureless Sintering and Properties of Cu/Ti3AlC2 CompositesArgon-Arc Welding of Cu/Ti3AlC2 CermetFabrication of Ti2AlC/TiAl Composites with the Addition of Niobium by Spark Plasma SinteringPreparation and Microstructural Evolution of Sol-Gel-Derived Enstatite FibersWear Properties of Basalt Fibers Reinforced CompositesPreparation of Mg,Al-Hydrotalcite/PE-EVA Flame-Retardant NanocompositeEffects of CVD C or SiC on the Mechanical and Chemical Properties of Carbon FibersDamage of T300 Carbon Fiber during Precursor PyrolysisEffects of Pyrolysis Temperatures on the Microstructure and Mechanical Properties of 2D-Cf/Si-O-C CompositesEffects of Molding Pressure on the Microstructure and Mechanical Properties of 2D-Cf/SiC Composites by PIP RoutesComplex Permittivity of 3D Textile SiC/C/SiC Composites Fabricated by Chemical Vapor Infiltration at X-Band FrequencyPreparation of 3D C/SiC-Cu Composites via Precursor Pyrolysis and Property InvestigationEvaluation of the Microstructure of 3D-Cf/SiC Composites Fabricated by Precursor Infiltration and PyrolysisImprovement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon CompositesInfluence of Carbon Cloth Filaments Upon the Properties of 2D C/SiC via Precursor Infiltration and Pyrolysis ProcessOnline-Joining of C/SiC-C/SiC via Precursor Infiltration and Pyrolysis ProcessPreparation and Properties of Hot Pressed 2D C/SiC CompositesPreparation and Properties of 2D Carbon Cloth Reinforced Ultra-High Temperature Ceramic Matrix CompositesFabrication of Porous Transpiration C/SiC CompositesOxidation Resistance of 2D C/SiC Composites Fabricated by FCVIEffects of Processing Parameters of SPS on the Densification and Texture of LaPO4 CeramicsDevelopment of Ceramic Composites for Industrial Wood-Cutting ToolsPreparation and Characterization of Kaolinite-Glucose Intercalation CompoundThermal Conductivities of ?-Si3N4 and BN-Filled Epoxy Molding Compounds (EMC)Heat Storage Performance of a PCM Heat Exchanger with Calcium Chloride HexahydrateThermal Energy Storage System of Sulfate / Fiber Matrix CompositeTime-Dependent Mechanical Behaviors of Polyamide 6/Nano-SiO2 CompositeEffects of Microstructure on Cavity Nucleation in Creeping Ceramics Containing Viscous Grain Boundary PhaseHigh Temperature Tribology and Solid Lubrication of Advanced CeramicsWear Mechanism and Self Lubrication of Engineering Ceramics at Elevated TemperaturesWear-Resistant Property of SiCp/Al CompositesProperties of Carbide-Metal Cermets Prepared from Composite Powders by Direct Reduction and Carburization ProcessDegassing Behavior and Solid State Reaction of Nano-Ti(CN) Base Cermets in SinteringFabrication of Superfine Ti(C,N)-Based Cermet by Mechanical Alloying and Subsequent Liquid SinteringInfluence of C and Al Addition on Microstructure and Mechanical Properties of Ultrafine TiCN-Based CermetsA Comparative Research on the Compositions and Microstructure of the Ti(CN) Based Cermets in Different Sintering AtmospheresSynthesis of Aluminum Nitride by Nitridation of ?-Al2O3 Nanoparticles in Flowing AmmoniaEffects of Mo(Ni) on Valence Electron Structures of TiC/Fe CermetsPreparation and Phase Analysis of Fe-SiAlON-MoSi2 CompositesFeasibility Analysis of Self-Reactive Spray Forming TiC-TiB2-Based Composite Ceramic PreformsPreparation and Characterization of Ti0.6Cr0.4OxNy Nano-Sized PowderHydration Resistance of Al/AlN Bonded Corundum Based Multiphase MaterialWC-Co Tool Failure Mechanism in Titanium Alloys MachiningEffect of Carbon Source on In Situ Carbothermic Reduction Fabricating Steel-Bonded Cemented Carbide GT35 from IlmeniteIntermetallic Alloys Ni3Si and Ni3(Si,Ti): Microstructures and PropertiesThermal Conductivity of Sol-Gel Bonded CastablesGelcasting of Alumina-Spinel RefractoriesNumerical Simulation of Temperature Field and Thermal Shock Resistance Property of Permeable BrickAnalysis on Resistance Coefficients and Optimization of Structure and Properties of Porous Permeable RefractoryEffects of Rare Earth Oxides on Microstructures and Properties of Magnesia RefractoriesTissue Engineering Scaffolds of Bioceramics and New Bone GrowthPreparation and Characterization of ?-Tricalcium Phosphate via Wet Mechanochemical TreatmentSynthesis of Biomimetic Hydroxyapatite in Syntetic Body FluidsCalcium Polyphosphate Bioceramics with Different Ca/P RatiosSynthesis and Properties of Polyethylene Glycol Diacrylate /2-Hydroxyethyl Mathacrylate HydrogelsPreparation of Calcium-Deficient Carbonated Hydroxyapatite Nanoparticles by Microwave ProcessDense Calcium Phosphate Bioceramics Sintered by Microwave PlasmaGrowth of Apatite in Bovine Serums on Porous HA/TCP CeramicsStructure of Carbonated Hydroxyapatite Based on Rietveld MethodPreparation and Characterization of the Porous Hydroxyapatite/Silk Fibroin Composite Scaffolds with Interconnected DuctsBioactivity, Wear and Corrosion Resistant Properties of Rare Earth/Calcium Phosphate Composite CoatingsBioactive and Stability of Calcium Phosphate-Polypyrrole Composite Coatings by Electrochemical DepositionBioactive Porous Film Produced on Titanium Substrate by Micro-Arc OxidationFabrication and Biocompatibility of Gradient Bioceramic Coatings on Titanium Alloy Substrate by Laser Cladding
In Vitro Dissolution Behavior of Biphasic Tricalcium Phosphate Composite Powders Composed of a-Tricalcium Phosphate and ?-Tricalcium PhosphateInfluence of Applied Voltage on the Structure of Micro-Plasma Oxidized Titania-Based Coatings Formed in an Electrolyte Containing Nano-HA and Calcium Salts and PhosphateStudy on Porous Titanium Biomedical MaterialsPreparation and Characterization of APTES Modified BioglassBiomineralization Properties of Polyvinyl Alcohol/Bioglass Biocomposite HydrogelsPreparation of ZrO2(f)/PMMA-PMA Composites by a Suspension Polymerization ProcessPreparation of Porous Polycaprolactone Scaffolds by Using Freeze-Drying Combined Porogen-Leaching MethodsEffect of Carbonate on the Properties of Bone Cement Containing PCCP and DCPAImproved Principal Component Analysis on the Comprehensive Hemocompatibility Evaluation of BiomaterialsReconstruction of Cranial Bone Defects Using a Compound of Bone Marrow Stromal Cells and Hydroxyapatite-Tricalcium PhosphatePreparation of Hydroxyapatite Coatings on Carbon/Carbon Composites by a Hydrothermal Electrodeposition ProcessResidual Stress and Reliability of Glass/Alumina Dental Bi-Layer CeramicsEffect of Multiple Firing on Wear Behavior of Dental Veneering CeramicStrength and Fracture Mode for Dental Colored ZrO2 Ceramics Coated with Dental PorcelainMechanical Properties and Microstructure of Partially Sintered Zirconia CeramicsStudy on Dental Colored Zirconia RestorationBond Strengths of Alumina-Glass and Zirconia-Glass Composites to Opaque-Dentine Porcelain
In Vitro Biocompatibility Evaluations of Four Dental CeramicsBiological Performance of Dental Biphasic Calcium Phosphate Ceramics Modified by Cold PlasmaEffect of SnO Coatings on the Bond Strength between Titanium and PorcelainTribological Performance of Ultra-Hard Ceramic Composite Coatings Obtained through the Microplasma OxidationProperties of Al2O3-TiO2 Coating Prepared by Plasma Spraying with an Internally-Fed Powder SystemXPS Studies on ZrO2 Thin Films Deposited on Glass Substrate by Sol-GelMechanical Properties of Nanostructured Zirconia Coatings Fabricated by Air Plasma SprayingPreparation of TiO2-Ni Wear-Resistant Film on Metal SurfacePreparation of Molybdate Conversion Coatings on the Anodizing Surface of Aluminum AlloyHydrothermal Electrophoretic Deposition of Yttrium Silicates Coating on SiC-C/C CompositesFabrication and Evaluation of the Nano-Ceramics Modified Epoxy CoatingsCeramic Coatings on Graphite via Polymer Vapor Pyrolysis Deposition ProcessFabrication and Characterization of Ceramic/Metal Composite Wear Preventive CoatingFabrication of TiC Coating on Carbon Steel Surface by SHS/PHIPFriction and Wear Behavior of TiN/TiAlN Coated Ti(C,N)-Based CermetsAn Investigation of Structure and Wear Properties of TiN/NbN Films Deposited by Reactive Magnetron SputteringReactive Electric Spark Deposition of Ti(CN)?Based Ceramics Coating on Titanium Alloy SubstrateCharacterization of Laser Cladding WC-Ti Composite CoatingsEffect of Cr Additives on the Microstructures and Properties of Laser Cladded Ni3SiPreparation of Ceramic Composite Coatings on Ti-6Al-4V Alloy by Surface Nanocrystallization/Micro-Arc OxidationPerturbation Molecular Dynamics Simulation of Thermal Conductivity of ZirconiaA Promising LaSmZr2O7 Ceramic with Pyrochlore Structure for Thermal Barrier CoatingsThermal Conductivity of (La0.5Sm0.5)2(Zr0.9Ce0.1)2O7 Ceramic for Thermal Barrier CoatingsPreparation and Thermophysical Properties of (La0.4Sm0.5Yb0.1)2(Zr0.7Ce0.3)2O7 Ceramic for Thermal Barrier CoatingsModeling and Simulation of Ceramic/Metal Gradient Thermal Barrier CoatingCoupled Thermomechanical Analyses for Thermal Shock of Ceramic/Metal Gradient Thermal Barrier CoatingsResidual Stress and Stability of Thermal Barrier Coatings during Cyclic Thermal LoadingA XPS Study of Atmospheric Plasma Sprayed TiB2 Coatings
In Situ Formation of NbC Reinforced Ni3Si Intermetallic Compounds by Laser CladdingPressure-Dependent Characteristics and Properties of Al2O3-SiO2 Thin Films Deposited on PETEffects of SrAl2O4 Homo-Buffer Layer on SrAl2O4:Eu Phosphors Film Grown on Glass by RF SputteringTriboluminescence of SrAl2O4:Eu Film with Strong Adhesion Fabricated by a Combination of RF Magnetron Sputtering and Post-Annealing TreatmentMagnetite Nanoparticles Surface Coating SiO2 and Magnetic Properties EvaluationFabrication and Characterization of Bioactive Cancellous-Like Surface on TitaniumRapid Reversible Superhydrophobicity to Superhydrophilicity Conversion of HF-Tuned ZnO Flower-Like Micro-Sphere FilmsPreparation of Cu Coated ZrW2O8 Composite Powders via Heterogeneous Precipitation ProcessOn the Microstructure of Aluminum Titanate Powders Coated with Mullite SolStructure and Dielectric Properties of AlN Multilayered Film on Al SubstrateFormation of ZrO2-Al2O3 Coating Layers on SiC Fiber by Dip-Coating ProcessPreparation and Characterization of the Ordered SiO2 Colloidal Crystallization FilmsInterfacial Coatings on Inorganic Fibers for High Temperature Ceramic Matrix CompositesStudy on Coating Method to the Stainless Steel Substrate Top of Ag/Al2O3 Catalyst SystemA Novel Technique for Viewing Stress Distribution with Mechanoluminescence MaterialsInfluences of Alkaline-Earth Metal Oxides on the Properties of Vitrified BondInfluence of Nucleating Additions on the Crystallization in the CaO-MgO-Al2O3-SiO2 Glass-CeramicsEffects of Phosphorus and Fluorine on the Crystallization and Structure of CaO-A12O3-SiO2 System Glass-CeramicMicrostructure and Crystallization Kinetics Analysis of MO-B2O3-Al2O3-SiO2(M=Mg, Ca, Ba) Glass-CeramicsPhase Separation and Nanocrystal TiO2 Formation in Na2O-B2O3-SiO2-TiO2 SystemMicrostructure and Properties of Calcium Borosilicate and Borosilicate Glass-Ceramic CompositesUse of Angang Slag for the Production of Glass-Ceramic MaterialsEffect of ZrO2 on Mechanical and Biological Properties of Calcium Phosphate-Based Glass-Ceramics for Biomedical ApplicationsProperties and Structure of BaO-ZnO-B2O3 GlassesLi2O-Al2O3-SiO2 Glass-Ceramics Used As Anodic Bonding MaterialsLaser Induced Crystallization of LAS Glass System Doped with Samarium IonOptical Properties of Ag Nanoparticle-Glass CompositesElectrical Conductivity in Alkali Iron Phosphate GlassesComparison of the DC and AC Conductivities of Li2O-P2O5 GlassAnalysis of Electric Conductive Activation Energy from the Electric Conductivity of Silicate and Borate GlassesPreparation and Characterization of the Sol-Gel Derived Bioactive Glass-FibersThe Possibility of Glass Storage Device with Long Term Preservation and High Density Adopted Nd:YAG LaserMicrowave Hydrothermal Synthesis of Nanosize TiO2Preparation of Layered Potassium TitanateStructure Property of Titanium Dioxide Thin Films in Sintered Temperature by the Sol-Gel MethodPreparation of Titania Film by Pyrolysis of Chelated Tetrabutyl TitanatePreparation of Titania Film by Vapor Decomposition of Chelated Tetrabutyl TitanatePhotocatalyses of Nano-Scaled ZnSe/TiO2 and ZnS/TiO2 HeterojunctionsXPS Investigation on Nano-TiO2 Modified by Titanate Coupling AgentPreparation and Characterization of Raspberry-Like TiO2/Cu Composite ParticlesInfluence of Cu2+ Doping on the Photocatalytic Activity of TiO2 FilmVisible Light Photoreduction Properties of N-Doped TiO2 Nanostructured FilmsHydrothermal Synthesis of Fe/N Co-Doped Titanium Dioxide and its Sterilization Activity via E. Coli under Visible Light IrradiationSterilization of E. Coli by Fe-Doped TiO2 Modified Photocatalytic Paint under Visible Light IrradiationNanoporous TiO2/SiO2 Composite Prepared by a Combined Sol-Gel and Hybrid MethodPreparation and Photocatalytic Property of WO3-TiO2 /Ti Ceramic Film via Anodic Oxidation TreatmentA Series of Bi-Based Oxychlorides as Efficient PhotocatalystsTri-Metallic Catalyst for Mass Production of Quasi-Aligned Carbon Nanotubes by Thermal Chemical Vapor DepositionSelf-Organized Zirconia Nanotube Arrays Prepared by AnodizationPreparation and Characterization of Macroporous Pumice-Porcelain Composite FoamsPreparation of Molybdates with Antibacterial PropertyPreparation and Bactericidal Properties of Nano-SiO2 Grafted with Macromolecular Quaternary Ammonium Salts Derivative of Alkylated PolyethyleniminesPreparation and Characterization of CPC Interclating a-ZrP as VOCs AdsorbentCombustion Synthesis of Alumina-Based Multiphase Foam CeramicHigh Temperature Properties of Geopolymeric CeramicPhase Transformation of Tangshan Ironstone-Tailings at Different TemperaturesPreparation of Wear-Resistant Ceramics with Tangshan Ironstone-TailingsSynthesis of Aluminium Titanate Ceramics from Waste Sludge of Aluminium FactoryAdsorption of Soluble Metal Ions from Red Mud by Modified Activated CarbonEffect of Calcination Temperature on Mineral Composition of Carbide Slag, Lime Activity and Synthesized XonotlitePreparation and Characterization of Desulfurization Sorbent from Hydrated Lime and Blast Furnace SlagLocal Structures and Decomposed Phases of Laser-Melted ZrSiO4Effect of Calcination Temperature on the Microstructure and Morphology of Bi3.25La0.75Ti3O12 Powders Synthesized from Polymerized PrecursorsMass Loss in SiC Crystal Growth ProcessGrowth and Characterization of Silicon Carbide by SublimationReaction Processes and Thermodynamic Modeling for SiAlON Structural Ceramic Powders Synthesized from Nonmetallic MineSynthesis of Low Agglomerating Spherical a-Fe2O3 NanopowdersPreparation and Thermal Decomposition Mechanism of Sr2+-Doped Mg,Al-Hydrotalcite NanocrystallineFormation of Mg2Si - 10vol%Al Composite via Solid-State ReactionThermal Decomposition Kinetics of Ammonium Aluminum Carbonate HydroxideAnalysis of Mechanisms of Spark-Plasma SinteringPractical Evolutions and Computer Simulation of Pores in BaTiO3 Ceramics during Sintering ProcessApplication of Master Sintering Curve Theory to Predict and Control the Sintering of Nanocrystalline TiO2 CeramicEffect of Sn on the Sintering of Fe-Si AlloysJoining ZrO2 to Al2O3 Ceramics Using Al2O3-ZrO2-SiC SlurriesConsolidation of Porous Ceramics Using Protein Foam by Microwave HeatingStructure Design for the Joining of Ceramics and MetalJoining of SiC Ceramic to Graphite Using Ni-51Cr Powders as FillerExpansion Coefficient of Sealing Material for Ceramic Metal Halide LampsPhase Structure and Microstructure of the Interface between WC Steel Bond Hard Alloy and Carbon SteelJoining TiB2-Ni Cermets with Ti6Al4V by Pulse Current HeatingMicrowave Joining of 95Al2O3 Using Interlayer Containing SiCInterface Microstructure of TiC Cermets/Steel Explosive Cladding PlateOn the Interface between Porcelain and TitaniumWettability of Graphite/Ni plus Cr SystemStiffness of Cermets Containing Interfacial Arc-MicrocracksStrength Analyses of Interference Fit between Ceramic Column and Metal SleeveCorrosion Behavior of SrZrO3@SiO2 Composite in Sodium HydroxideMicrostructure and Thermal Shock Resistance of LaPO4-ZrO2Preparation and Characterization of Coated ZnO NanoparticlesEffect of Heat Treatment on Specific Surface Area of Si-C-O FibersPrediction of the Properties of an Alumina Green Body Using an Artificial Neural Network by a New PSO-Gain Backpropagation AlgorithmOptimal Design for Mechanical Properties of Composite with Combination of Genetic Algorithm and Artificial Neural NetworkStrength Model of Melt-Growth Composite CeramicsEnhanced Mechanism of Fracture Toughness in Cannon BoneDamage Model and Failure Stress of Ceramic Particle Ni Base Alloy CompositeDamage Finite Element Analysis of Nano- Composite CeramicsSize Dependent Thermal Expansion Coefficient of Rod-Shaped Oxide Eutectic CeramicNegative Thermal Expansion of Yb2Mo3O12 and Lu2Mo3O12Structure and Thermal Expansion Behavior of Dy2-xGdxMo4O15 Solid SolutionMulti-Scale Modelling of SinteringMonte-Carlo Simulation for the Grain Growth of Si3N4 during Sintering ProcessMolecular Dynamics Study of Diffusion Behavior in Amorphous Silica with Hydroxyl GroupApplication of Improved Back-Propagation Neural Network and Genetic Algorithm to the Preparation Processing of the Mg,Al-Hydrotalcite/Polymer NanocompositeModeling on Falling Velocity of Sodiumtetraborate Aqueous Solution Drops before the Gelation of PVA-TiO2 Suspensions by the Runge-Kutta Method in Matlab 6.5Flying Combustion Experiments and Numerical Simulation for Ti-B4C-C Agglomerated Particles during the Self-Reactive Spray Forming ProcessAtomistic Simulation of Defect Energy in Pyrochlores and its Effect on DisorderSimulation of the Grain Boundary Effects in PTCR CeramicsLambdoidal Reinforced Microstructure of Mactridae ShellAb-Initio Study on Adsorption and Diffusion of Au Atoms on Clean Si(001) and H-Si(001) SurfacePractical Advances on the Hot Wire TechniqueAn Original Process of Nanoporous Materials via Templating Nickel Phosphate Colloidal ParticlesPreparation and Heat Treatment of High Purity Al(OH)3 and Sr(OH)2 Composite PowderPreparation and Characterization of Silica-Alumina-Pillared Montmorillonites with High Surface AreaStudy of Different TiO2 Electrode Structures on Dye-Sensitized Solar CellAnalysis of Profitability in Chinese Listed Ceramic CompaniesCharacteristics and Mechanisms of Dynamic Oxidation for ZrB2-SiC Based UHTCEffect of Glass Phase on the Thermal Shock Resistance of ZrB2-SiC Ultra High Temperature CeramicMicrostructure and Mechanical Properties of SiC Whisker-Reinforced ZrB2 Ultra-High Temperature CeramicEfficient Synthesis/Sintering Routes to Obtain Fully Dense ZrB2-SiC UHTC MaterialsMicrostructure and Mechanical Properties of ZrB2-Based UHTC via Reactive Hot PressingEffect of the Rare Earth Oxides on Sintering Behavior and Microstructure of ZrB2-SiC CeramicsMicrostructure of ZrB2?SiC Composite Fabricated by Spark Plasma SinteringPressureless Sintering of Ultra-High Temperature ZrB2-SiC CeramicsOxidation Kinetics of ZrB2-SiC CompositesOxidation of Short Carbon Fiber Reinforced ZrB2-SiC Ceramics under Atmospheric and Oxyacetylene Torch ConditionsPreparation and Characterization of Stable ZrB2-Based Ultra-High Temperature Ceramics Slurry by Aqueous GelcastingReactive Synthesis and Mechanical Properties of ZrB2-SiC-ZrC CompositesProperties and Microstructure of an HfB2-HfC-SiC Ultra High Temperature CeramicsEffect of Iron Additive on the Sintering Behavior of Hot-Pressed ZrC-W CompositesCombustion Synthesis of Si3N4 from Si/NH4Cl at Low Nitrogen PressurePreparation and Properties of 2D C/SiC-TaC CompositesEffects of Oxygen Content on the Properties of Ultra-High-Temperature Resistant Si-Al-C FibersProcessing and Characterization of Ultra-High Temperature Oxide Fiber-Reinforced Oxide Ceramic Matrix Composites with Improved Thermomechanical PropertiesThermal Shock Resistance of Ultra-High Temperature CeramicsFracture Strength of Ultra-High Temperature CeramicsMicrostructure and Mechanical Properties of High Density PCBN AggregatesMechanical Properties Evaluation of Ultra-High Temperature CeramicsLayered and Graded Coatings as Plasma Facing Materials for Fusion in LSCPMToughness and Superplastic Deformation of Laminated CeramicEffect of Residual Stress on the Mechanical Capacity of Layered CompositeTransient Thermal Stress Analysis of a Plate with Double-Sided FGM CoatingsTemperature Dependency of Dielectric Properties in Epitaxially Grown SrBi4Ti4O15 Films with Different Orientation0.75SrBi2Ta2O9-0.25Bi3TiTaO9 Layered Structural Thin Films: Microstructure and Ferroelectric PropertiesMicrostructure and Dielectric Properties of LixTixNi1-2xO Thin FilmsA Stepwise Control Route for the Preparation of Mg-Al, Zn-Al, and Mg-Fe Layered Double Hydroxides (LDHs)Fabrication of ZrO2-SUS Functionally Graded Materials by Slip CastingPreparation of Nano-Laminated Composite by Electrophoretic DepositionPreparation of Glass-Alumina Functionally Gradient Materials by Rapid Prototyping TechnologyTi/Al2O3 and Ni/Al2O3 Laminates Prepared by Plasma Activated Sintering (PAS)TiN/Al2O3 Functionally Graded Material Fabricated by In Situ ReactionCorrosion Protection of Stainless Steel by ZrO2-CeO2 Sol-Gel CoatingsFabrication of SiC Dense-Porous Laminates by Electrophoretic Deposition ProcessEffect of Silicon Carbide Interlayers on the Mechanical Behavior of T800-HB-Fiber-Reinforced Silicon Carbide-Matrix CompositesDynamic Observation of Fracture Process in a Silicon Carbide- Matrix Laminated Ceramic CompositePreparation of Ternary Layered Ti3SiC2 Ceramic by SHS/PHIPFabrication and Mechanical Properties of B4C/BN Laminated CeramicsJoining CoSb3 to Metal Surface of FGM Electrode for Thermoelectric Modules by SPSSplat Formation of Plasma Sprayed Functionally Graded YSZ/NiCrCoAlY Thermal Barrier CoatingsPreparation and Characterization of Multilayered Mullite/Mo Functionally Gradient MaterialsPreparation of Mg-W Graded Materials by Spark Plasma SinteringCladding of WC-Cr3C2 Cermet Coating by Laser Controlled Reactive SynthesisMicrostructure and Mechanical Properties of Graded Materials Prepared by Field-Activated and Pressure-Assisted Combustion SynthesisMaterial Design of Alkaline Niobate Piezoelectric CeramicsPreparation of KNbO3 Powder by Modified Pechini Method from Layered Perovskite Aqueous SolutionPhase Development during Mixed?Oxide Processing of a [Na0.5K0.5NbO3]1-x -[LiTaO3]x PowderInfluence of Sintering Temperature and Sintering Aid on Electrical Properties of (K, Na)NbO3-LT CeramicsTemperature Dependence of Raman Spectrum of Lead-Free Piezoelectric (Na0.5K0.5)NbO3-LiNbO3 Ceramics(1-x)(K0.44Na0.52Li0.04)(Nb0.84Ta0.10Sb0.06)O3-xSrTiO3 Lead Free Piezoelectric CeramicsHydrothermal Synthesis of Na(Nb1-xTax)O3 Powder for Fabrication of Lead-Free Piezoelectric CeramicsFabrication and Characterization of Li2O Excess (Na0.49K0.49Li0.02)(Nb0.8Ta0.2)O3 Piezoelectric CeramicsPreparation and Characterization of High Textured KSr2Nb5O15 Lead-Free Piezoelectric CeramicsMorphotropic Phase Boundary Study of the BNT-BKT Lead-Free Piezoelectric CeramicsPiezoelectric and Dielectric Properties of (Bi0.5Na0.5)0.94(Ba1-xSrx)0.06TiO3 Lead-Free Piezoelectric CeramicsPiezoelectric and Dielectric Properties of Bi2O3-Doped (Bi0.5Na0.5)0.94Ba0.06TiO3 Lead-Free Piezoelectric CeramicsGrain Growth and Electric Properties of Lead-Free BaTiO3 Ceramics
