Selected, peer reviewed papers the Fifth China International Conference on High-Performance Ceramics (CICC-5), Changsha, China, May 10 ~ 13, 2007
Buch, Englisch, 2000 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3800 g
ISBN: 978-0-87849-473-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Sponsors
Preface
Luminescence Sensing of Temperature in Oxides
Investigation on the Effects of Zn on PbTiO3
Preparation and Characterization of (1-x)BiScO3-xPbTiO3 Ceramics by Two-Step Sintering
Influence of Varying the Powder Loading Content on the Homogeneity and Properties of Extruded PZT-Fibers
Effect of PbO Concentration on the Templated Grain Growth of PMN-32.5PT Ceramics
Pulsed Power Supply of Ferroelectric Ceramics by Shock-Induced Depoling
Electrical Behavior of PSZT Ferroelectric Ceramic under Shock Wave Compression
Preparation and Characterization of Relaxor-Based Ferroelectric Thick Films with Single Perovskite Structure
Fabrication of Spark Plasma Sintering on Pb(Mg1/3Nb2/3)O3–PbTiO3 Ceramics Layers Prepared by Tape Casting and TGG Method
Preparation and Characterization of Perovskite Pb(Mg1/3Nb2/3)O3-PbTiO3 by a Modified Polymerized Complex Process
Characterization of the Bismuth-Based Piezoelectric Ceramic System (1-x)Bi(Mg1/2Zr1/2)O3-xPbTiO3
Preparation of Mg and Ti Co-Doped NiO-Based Ceramic and its High Dielectric Properties
Liquid Phase Sintering of Barium Titanate Ceramics for High Energy Density Capacitors
Effects of Processing on Microstructure and Dielectric Properties of Ultrafine- Grained Barium Titanate Based Ceramics for BME-MLCC Applications
Synthesis, Characterization and Electrical Properties of Barium Titanate Films Fabricated by Hydrothermal Method
Preparation of Barium Strontium Titanate Nanopowders by a Sol-Gel Hydrothermal Synthesis Method
Low Temperature Hydrothermal Synthesis and Sintering of Ba0.6Sr0.4TiO3
Effect of Annealing Temperature on the Microstructure of Barium Strontium Titanate Films
Microstructure and Dielectric Properties of Ba0.5Sr0.5TiO3 Ceramics by Spark Plasma Sintering
Dielectric Behavior of (1-X)BaTiO3-XCaCu2.94Mn0.06Ti4O12 Composite Ceramics
Influence of Excess Bi2O3 on the Characteristics of (Na0.5Bi0.5)TiO3-BaTiO3 Ceramics
Effects of Mn-Doping on the Piezoelectric and Ferroelectric Properties of (Na0.8K0.2)0.5Bi0.5TiO3 Ceramics
Effects of Mn Doping on Dielectric Properties of BSTN Ceramics
Electrical and Physical Characteristics of Ba(Zr0.1Ti0.9)O3 Thin Films under Oxygen Plasma Treatment for Nonvolatile Memory Devices Application
Nano-Precipitation in SrTiO3-Based Functional Ceramics
Electrical Characterization and Microstructures of Tb-Doped Bi4Ti3O12 Thin Films
Cation Distribution and Structural Instability in Pr-Doped Bi4Ti3O12
Electrical Characteristics and Microstructures of (Gd, Dy)-Doped Bi4Ti3O12 Ceramics
Electrical Characteristics and Microstructures of Ce-Doped Bi4Ti3O12 Films
Effect of Tb Substitution on Electrical Characteristics and Microstructures of Bismuth Titanate Ceramics
Preparation and Dielectric Properties of the Layered Perovskite Sr4Bi4Ti7O24 Ferroelectric Ceramics
Ferroelectric Properties of Sol-Gel Derived Ca1-xSrxBi4Ti4O15 Thin Films
Synthesis of Nanocrystalline 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 Powder by a Citrate Method
Processing and Properties of Ferroelectric Bi4-x La xTi3O12 Ceramics
Bi4-xLaxTi3O12 Ferroelectric Thin Films Prepared by RF Magnetron Sputtering
Preparation and Magnetic Property of Bi2Fe4O9 Nanoparticles by Hydrothermal Method
Molten Salt Synthesis of CaCu3Ti4O12
Effects of the Replacement of Ti by Zr on the Dielectric Properties of CaCu3Ti4012 Ceramics
Effects of CuO on the Preparation, Microstructure and Dielectric Response of CaCu3Ti4O12
Preparation and Characterization of CaCu3Ti4O12 Ceramics by Cold Isostatic Press Forming
Preparation and Properties of CaCu3Ti4O12 Thick Film by Aerosol Deposition Method
Dielectric Properties of Zr-Doped CaCu3Ti4O12 Ceramics
Low-Temperature Sintering of Ba5(Nb1-xVx)4O15 Ceramics with H3BO3
The Characteristics of Ferroelectric Sr0.4Ba0.6Nb2-xVxO6 Dielectrics
Preparation and Morphological Controlling of Nanophase NaNbO3 by Sol-Gel Method
Difference in Ordering Ability Between Ca(Al1/2Nb1/2)O3 and Ca(Fe1/2Nb1/2)O3
Synthesis of (1–x) CaTiO3–xNdAlO3 Ceramic Powder via Ethylenediaminetetraacetic Acid Precursor
DC and AC Electrical Properties of Sr2-xLixFeMnO6 Compound
Microwave Dielectric Ceramics and Devices for Wireless Technologies
Tailoring of the Dielectric Properties of Some Low Sintering Temperature Ceramics
Sintering and Microwave Dielectric Characteristics of ZnTa2-xxNbxO6 Ceramics
Preparation and Characterization of Citrate Sol-Gel Derived CaLa4Ti4O15 Microwave Dielectric Ceramics
Low Temperature Sintering Ba3Ti5Nb6O28 Ceramics with Tunable Temperature Coefficient of Dielectric Constant
Preparation and Dielectric Properties of BaO-Sm2O3-4TiO2 Microwave Ceramics with B2O3 and CuO Addition Sintered in Low Temperature
Low Temperature Sinter-Ability of Microwave Dielectric Ceramics 0.4(Ca0.61Nd0.26)TiO3-0.6(Li0.5Sm0.5)TiO3
Low Temperature Sintering and Microwave Dielectric Properties of Zinc Titanate Ceramics for LTCC Applications
Change of Microwave Dielectric Loss during the Solid-Reaction Synthesis of SrFeCo0.5Oy
Structure and Microwave Properties of NaxCa1-xAl2-xSi2+xO8 (0 < x < 0.67) Plagioclase Feldspar
Microwave Characteristics of ZnO-Doped CeO2 Dielectric Resonators
Synthesis of Cordierite Powders by Low Temperature Combustion Method
Automatic Multimode Measurement for Microwave Ceramics
Accurate FEM/BEM Simulation of Wireless Passive Surface Acoustic Wave Sensors
A Micro Piezoelectric Motor with a Disk-Pivot Structure
Ultrasonic Linear Motor with a High Stiffness Support Mechanism for Precision Control
A Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric Ceramics
A Considering Method of Density Distribution Factor for the Ceramic Motor with Soft Magnetic Composite Core
A Piezoelectric Micropump Based on MEMS Fabrication
Finite Element Analysis and Design of Monolithic Multilayer Piezoelectric Micromanipulator
A Novel Piezoelectric Nebulizer
Fabrication of Piezoelectric Cantilever Beam Based on Nanostructured PZT Film
Magnitude Versus Frequency Performance of Vibration Acceleration Sensor Based on Cymbal Transducer
Effects of the Top-Electrode Annealing on the Ferroelectric Properties of BiFeO3 Thin Films
Electrical Characteristics of Fluorine Passivated MOCVD-TiO2 Film on (NH4)2Sx Treated GaAs
Interfacial Behavior of SiC-Based Boundary Layer Capacitors
Microwave Sintering of YSZ Electrolyte Materials for SOFC
Properties of YSZ Electrolyte Sintered at 1250°C
Fabrication and Conductivities of CeO2-Based Oxygen-Ion Conductors Doped by M2O3 (M=La, Nd, Sm and/or Ga)
Synthesis of Nanocrystalline Ce0.8Sm0.2O1.9 by Citrate Gel Method
Electrical Conductivity of Ceria Co-Doped with Zr and Re (Re=La,Y)
Low-Temperature Combustion Synthesis and Characterization of Ce1-xPrxO2-d Solid Solutions
Effect of Moisture on Chemical Stability and Hydrogen Permeability of Ni-BaCe0.9Y0.1O3-d Cermet
Preparation of SrFe0.6Cu0.3Ti0.1O3-d Mixed Oxygen-Ionic and Electronic Conductor
Limiting Current Oxygen Sensors with LSM as Dense Diffusion Barrier
Novel Mg Sensors for Application in Molten Al
Preparation and Characterization of Gd1-xSrxCoO3-d
Transformation from Monoclinic LiMnO2 to Spinel LixMn2O4 during Electrochemical Cycling
Effect of Mn–Doping Content on the Microstructure and Crystallite Size of LiNi0.85-xCo0.15MnxO2 Cathode Materials
Structural Studies on Ceria-Carbonate Composite Electrolytes
Preparation and Structural Characterization of a Needlelike Carbon from the Refined Coal Tar Pitch
Fabrication of Ni-Based Anode Supported SOFCs by Aqueous Tape Casting
Manufacture of Electrolyte Component of SOFC
Rate Capability Fade of 18650 Li-Ion Cells
Solution Combustion Synthesis of LiMn2O4 with Different Starting Reactant Compositions
Effects of Fuel Content and Calcination Procedure on Phase Composition and Microstructure of LiMn2O4 Prepared by Solution Combustion Synthesis
Effect of Heating Time on the Structural and Electrochemical Properties of LiFePO4 by Molten Salt Method
Effect of Annealing on Laser-Ablated K3Li2-xNb5+xO15+2x Thin Films
Structure and Optical Properties of SrBi2Nb2O9 Thin Films Fabricated by Pulsed Laser Deposition
Pulsed Laser Deposition and Characterization of InZnO Alloyed Thin Film
Influence of Mechanical Milling and Annealing Atmosphere on the Photoluminescence Properties of ZnS:Cu,Cl Phosphors
Effect of Doping Mode on the Photoluminescence Property of CaS:Eu Phosphor
Ultraviolet Photoluminescence on Nano-Crystalline 6H-SiC
Gallium and Nitrogen Co-Doped ZnO Thin Films by Pulsed Laser Deposition
Synthesis and Characterization of AZO Thin Films by Sol-Gel Process: The Influences of Precursors and Dopants
Preparation and Spectral Properties of PVP-Modified ZnO Nanorods
Preparation of Sm2O3 Optical Thin Film by Hydrothermal Process
Photochromic Properties of WO3 Thin films
Effects of Microstructure and Relative Density on the Dielectric Constant of Porous Silica
Preparation and Characterization of Porous Silica Obtained by Hydrochloric Acid Selective Leaching Metakaolinite
Manganite-Based Heterojunction Position-Sensitive Detectors
Optical Scattering Mechanisms of Functional Nano-Material Films on Transmission Display Screen
Development of A Novel Elasticoluminescent Material with Calcium Aluminosilicate
Elastico-Luminescent Nanoparticles Prepared via Polymer-Coated Precursor Formed in Reverse Micelles
Blue-Greenish Light Emission from Stress-Activated SrCaMgSi2O7:Eu
Luminescence Property of Eu2+ Doped Strontium Silicate Yellow Phosphor for White Light Emitting Diode
VUV Spectral Properties of MBPO7 Co-Doped with Tm3+ ,Gd3+
Luminescence Properties of LnZr(BO3)2:Re (Ln=Ba, Sr; Re=Eu, Ce,Tb)
Luminescent Properties of Re2SiO4:Tm3+ (Re=Mg,Ba,Sr) Under VUV
Preparation and Luminescent Properties of Zn2SiO4:Mn2+
Sol-Gel Deposition and Luminescence Properties of Spherical Phosphors Ca2Y8(SiO4)6O2:Eu3+
Preparation and Luminescent Properties of SrAl2O4:Eu2+,Dy3+
Preparation and Characterization of SrAl2O4: Eu,Dy Powders
Synthesis of Ultrafine GSAG:Ce Phosphor by Solution Combustion
Fabrication and Luminescence Properties of Y2SiWO8:Dy3+ Phosphors via Sol-Gel Process
Synthesis and Properties of Ca0.85(W1-xMox)O4:Eu0.15 Rare Earth Phosphors
Preparation of Upconversion Luminescent NaYF4 Co-Doped with Yb3+/Er3+ via Hydrothermal Synthesis
Enhancement of Blue Emission via Upconversion in Solid-State Synthesized Hexagonal NaYF4:Ln3+
Preparation and Characterization of Transparent Nanocrystalline Ceramics
Synthesis of Ultrafine MgAl2O4 Powders by Nitrate-Citrate Sol-Gel Combustion Process
Preparation and Growth Mechanism of Hexagonal MgAl2O4 Spinel Fibers
Dielectric Properties of MgAl2O4 Transparent Nano-Ceramic
Highly doped Mn:MgAl2O4 Transparent Ceramics
Optical Properties and Microstructure of Mn: MgAl2O4 Transparent Ceramic after HIP Treatment
Fabrication of High Transparent YAG Ceramics by Vacuum Sintering at Low Temperature
Sinterability of Nd:YAG Powder Prepared by Alcohol-Water Co-Precipitation Method
Sintering of Transparent Polycrystal Nd:YAG with MgO as Additive
YAG:Ce3+ Nanopowders: Synthesis, Characteristics and Luminescent Properties
Preparation of Transparent Nd:Gd2O3-HfO2 Ceramic
Preparation of Aluminum Oxynitride Powder by Solid State Reaction Method
Influence of Raw Materials on the Carbothermal Synthesis of Single-Phase Aluminum Oxynitride Powder
A New Method for the Preparation of Transparent AlON Ceramic
Preparation of Transparent AlON Ceramics Using Single-Phase Powder Obtained from Carbothermal Reduction
Preparation of Transparent AlON Ceramics Using Powder Synthesized from Nano-Sized Al2O3 and AlN
Hot-Pressed Translucent Aluminum Oxynitride (AlON) Ceramics
Nanopowder and Fine-Grained Ceramics for Multilayer PTCR Elements
Microstructure and Electrical Properties of BaTiO3-Based PTC Ceramics Prepared from Nanopowders
Preparation of Bi-Based High Curie Temperature PTCR Ceramic
Influence of Liquid Phase on Grain Growth of Ba0.998La0.002TiO3 Ceramics
Influence of Rare Earth on the Electrical Properties and Microstructure of Barium Titanate Ceramics
Fabrication of BaTiO3-Based Semiconducting Ceramic Thick Films by Aqueous Tape Casting
One-Step Electrodeposition of CIGS Thin Films from Alcohol Solution on Flexible Substrate
Preparation of ZnO Nanopowder by Chemical Liquid-Phase Method with Polyethylene Glycol Additives
Roles of Dopants in Sintering Behavior of ZnO-Based Varistor
Corrective Effect of Average Grain Size on Grain Boundary Number of ZnO Varistors
Modification of Electrical Properties of T-ZnO Whisker by Doping Fe
Influences of Twin Boundaries on Microstructural Characteristics of ZnO Varistors Simulated by Voronoi Network
The Nonlinear Characteristics of Different Additives Added V2O5-ZnO Varistor
Effect of B2O3 Doping on the Microstructure and Electrical Properties of ZnO-Based Varistors
Influence of Pr6O11 on the Characteristics and Microstructure of Zinc Varistors
Influences of Dopants on the Microstructural Nonuniformity of ZnO Varistors
Effect of Ho2O3 Doping on Performance of ZnO Varistor
A New Model for Simulating AC and Surge Properties of ZnO Varistors Based on Microstructural Characteristics
Properties of ZnO Varistors Prepared with Nano-Sized Powders
Investigation of Electron Traps in SnO2 Based Varistor Ceramics
Nanocrystalline Tin Oxide Thick-Film Gas Sensor for H2S Detection
Co-Doped Tin Oxide Thin Films by Spin Coating
Synthesis of TiO2 Nanotube Arrays Through Multistep Anodization
Self-Organized High Aspect Ratios Titanium Oxide Nanotube Arrays Prepared by Anodization
Fabrication of Mn2O3 Nanowire with Ultra Fine Morphology via an Electrospinning Technology
XPS Research on SrTiO3-Based Voltage-Sensitive Material
Thermoelectric Properties of Bi2Te3 Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering
Preparation of Bi2Te3 Nano-Powders via an Aqueous Chemical Method
Effect of Dopant on N-Type Bi2Te2.7Se0.3 Thermoelectric Materials Fabricated by Spark Plasma Sintering
Thermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone Melting
Preparation and Thermoelectric Properties of AgPb18SbTe20 Materials via Hydrothermal Synthesis Method
Synthesis and Thermoelectric Properties of Ba8Ga16+xSbxGe30-2x (x=0,1) Clathrate Single Crystals
Preparation of Nanosized La2CuO4 Particle by Chemical Precipitation Method and its Thermoelectrical Properties
Preparation and Thermoelectric Properties of (Ca1-x-yKxBiy)3Co4O9 Ceramic
Preparation and Thermoelectric Properties of Al2O3-Doped ZnO Ceramics
Dipole Cluster State and Dielectric Relaxation in Relaxor Ferroelectrics
Properties and Numerical Simulation of Electromagnetic Meta-Materials (SRR) Based on Ceramic Substrate
Cofiring Behavior of Ferroelectric Ferromagnetic Composites
Microwave-Assisted Synthesis of Hexagonal Barium Ferrite Powders with Nano-Particle
Hydrothermal Synthesis of Sodium-Potassium Niobate Nanopowders
Synthesis of YIG Nanopowders by Sol-Gel Method
Magnetic and Dielectric Properties of BST-YIG Composites
Solid Phase Synthesis and Sintering Properties of Yttrium Iron Garnet
Complex Permeability Spectra of Co-Substituted Lithium Zinc Perminvar Ferrite
Synthesis, Microstructure and Magnetic Properties of Nanocrystalline Ni-Zn Ferrite by a Modified Wet Chemical Method
Influence of Different Calcination Conditions on the Microstructure and Phase Constitution of Nickel-Zinc Ferrite Nanocrystalline Powders Prepared by a Sol-Gel Auto-Combustion Method
Preparation and Magnetic Properties of Dense NiCuZn Ferrite by Spark Plasma Sintering
Synthesis, Characterization and Magnetism of Nanosized Copper Ferrite
Preparation of Nanosized Barium Ferrite Spinel by a Sonochemical Method
Nano-Crystalline Barium Hexaferrite Powders Prepared by Mechanical Alloying Using Acetate Precursor
Effect of the Combination of HTR and NTR Processes on the Magnetic Properties of Strontium Hexaferrite
Preparation and Characterization of Nanometer Iron Oxide by Sol-Gel Method and Supercritical Fluid Drying Technology
Preparation of Zn1-xCoxO Diluted Magnetic Semiconductor by Hydrothermal Method
Low Temperature Synthesis of BiFO3 Film by Hydrothermal Method
Structure and Magnetic Properties of BaLa0.5Fe11.5O19/ SiO2
Electromagnetic Property of MnZn Ferrite/SrTiO3/PTFE Composites
Structure of Gd(5-x)HoxSi4 Solid Solutions
Synthesis of Y2BaCuO5 Nanopowder by Co-Precipitation under Ultrasonic Irradiation
Effect of Pre-Treatment on the Microstructure and Superconducting Properties of Bi-2223/Ag Tapes
Effect of Lead Oxide Compounds on the Microstructure and Properties of Bi-2223/Ag Tapes
Study on the Opening and Modifying of MWNTs
Synthesis and Hydrogen Storage Capacity of SiC Nanotube
Field Emission Characteristics of Orthorhombic Boron Nitride Films
Electrical Properties of Sb-Doped BaPbO3 Ceramics
An Aqueous Photocrosslinkable Chitosan-PVA (Polyvinyl Alcohol) Binder for Tapecasting Alumina Substrates
Dielectric Performance of Alumina Ceramics Sintered at Different Temperatures
Synthesis of CuFeO2 Powder by Sol-Gel Method
P-Type Transparent Conductivity of Cu1-xAlS2 (x = 0 ~ 0.08)
A Novel Temperature Induced Gelation Forming Method
Formation of Regular Hexagonal Dislocation Network in Chemical-Furnace Sintered Alumina
Phase Transition Activity Characteristics of Nanosized AlOOH in the Hydrothermal Synthesis of Nanosized a-Al2O3
Rheological Behavior of Modified Starch-Alumina Oxide Suspensions
Preparation of High-Purity Ultrafine a-Al2O3 by Solid-State Reaction at Room Temperature
On the Sintering Activation Energy of a-Al2O3
Control of Ceramic Material Microstructure with Super High Magnetic Field
Synthesis Processes of Nano Alumina Abrasive
Effects of Rare Earth Oxides on the Microstructure and the Mechanical Properties of High-Purity Alumina Ceramics Sintered at Low Temperature
Controlling Porosity and Pore Size Distribution of Alumina Ceramics in Consolidation Forming Process Using Modified Starches
Electro-Mechanical and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites
Influence of Processing Parameters on Manufacturing Al2O3 Parts by Extrusion Gelation Freeform Fabrication
Study on Alumina Ceramics for Dechlorinating Reactor Lining
Mullite Fiber Reinforced Alumina Ceramic Matrix Composites
Experimental and Numerical Researches of Dynamic Failure of a High Strength Alumina/Boride Ceramic Composite
Mechanical Properties and Microstructure of Al2O3/(W, Ti)C Nanocomposite
TiN/Al2O3 Composite Material Synthesized by Aluminothermic Reduction Process in Reductive Atmosphere
Properties of In Situ Synthesized Alumina Ceramic Core Composites
Precision Grinding of Concave Spherical Surface of High-Alumina
Influence of Cosurfactant on the Structure and Properties of ZrO2 Nano-Powders Prepared in Microemulsion System
Water Debinding for Zirconia Powder Injection Molding
Kinetics for Supercritical CO2 Debinding of Injection Molded ZrO2
Rheological Properties and Gelcasting Behavior of Ultrafine ZrO2 Suspension
Wear Properties of Y-TZP Ceramics Dispersed with Second Phase Particles
Low Temperature Sintered CaTiSiO5-CaTiO3 Dielectric Ceramics Doped by 2ZnO-B2O3
Phase Composition, Mechanical and Thermal Properties of (MgO)0.1-x(YO1.5)x(ZrO2)0.9 and (MgO)0.1-x(CaO)x(ZrO2)0.9 Ceramics
Low Temperature Synthesis and Characterization of CaO and MgO- Stabilized Nanocrystalline Tetragonal Zirconia by Citrate Gel Process
Fabrication of Porous Zirconia Ceramics by Injection Molding Method
Preparation and Characterization of Zirconia-Based Multi-Phase Nanocomposite
Effect of Temperature on the Synthesis of ZrO2-Mullite Powders in Molten Sodium Sulfate
Effects of Substitution SiC for SiO2 on Microwave Heating of ZrO2-Al2O3-SiO2 System Composites
Microstructures, Properties and In Situ Toughening of Rapidly Solidified Al2O3/YSZ Composite Ceramics Prepared by Combustion Synthesis
Preparation of SiCw/3Y-ZrO2/Al2O3 Composites
Preparation and Performance of AlN-ZrO2 Multiphase Material
Preparation and Characterization of Pr-CeO2 Nano-Powders by Co-Precipitation-Hydrothermal Method
Influence of Preparation Temperature on Performance of Ce1-xPrxO2 Ultrafine Powder Prepared by a Microemulsion Process
Preparation and Characterization of SiO2 Nanoparticles by Microemulsion Method
Fabrication of the Monolithic Silica Aerogels Using Sodium Silicate and its Network Strengthening
Preparation of Silicon Dioxide Fiber via Sol-Gel Process
Synthesis of Core@Shell Composites with Gold Nanoparticles Trapped inside Ceramic Silica Shells by the Sol-Gel Method
Effect of Heat Treatment on the Microstructure of TiO2 Nanofibers Prepared by Refluxing in Basic Solution
Synthesis of Mullite Nanocomposite from Natural Kaolin
Hydrothermal Synthesis of Nanosized Mullite Powders
Preparation and Structure Characterization of Mullite Fiber Porous Ceramic
Catalyst-Free Synthesis of Mullite Nanosticks
Microstructure and Mechanical Properties of Mullite Composites via Pressure Molding and by Oxidation of an Al-Si Alloy Powder
A Novel SiC Precursor with High Ceramic Yield: Antimony-Substituted Polysilane (APS)
Preparation of Ultrafine SiC Powders by Carbothermal Reduction
Synthesis of Silicon Carbide Platelets by Double-Heating Technique
Preparation and Properties of SiC Fibers Containing Yttrium and Aluminum
Synthesis of Silicon Carbide Whiskers in Electric Field Furnace
Preparation of RBSC Green Bodies by Gel-Casting
Transpirational Performance of Oriented Porous SiC Transpiration Cooling Materials
High Porosity SiC Ceramics with a Narrow Pore Size Distribution
SiC Micro-Threads Prepared within the Carbon Fiber Felt
Effects of Deposition Temperature on the Growth Characteristics of CVD SiC Coatings
Microstructure and Mechanical Properties of C/SiC Composites Prepared at Low Temperatures
Properties of SiC/Fe Composites Prepared by Coating Process and Powder Metallurgy Method
Surface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Comparison of As-Received Powders
Selective Laser Sintering of Si3N4 and Al2O3 Ceramic Powders
Properties of Mechanical Activation Combustion Synthesied High a-Content Silicon Nitride Powders and Sintered Bulk Ceramics after Iteration Reactions
Combustion Synthesis of ß-Si3N4 and ß-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO3 and NH4F
Synthesizing Silicon Nitride Whiskers by Solvothermal and Carbothermal Methods
Texturing of Si3N4 Ceramics via Strong Magnetic Field Alignment
Fabrication of Thick Silicon Nitride Substrates by Tape Casting
Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction
Preparation of Si3N4 Ceramics by Aligning a-Si3N4 Whiskers
Oxidation and Corrosion of Silicon Nitride at 1200°C and 1500°C
Synthesis of Rod-Like a-SiAlON by Carbothermal Reduction-Nitridation
Optimization of a-SiAlON Microstructure by Heat Treatment
Abrasive Erosion Comparison for a Ceramics and a High Chrome Cast Iron Applied in a Slurry Pump
Preparation of In Situ Synthesized SiC Particles Reinforced Highly Porous Si3N4 Ceramics by Gel-Casting
Surface Oxidation of Carbon Fiber and its Influence on the Properties of Carbon Fiber Reinforced BN-Si3N4 Composites
Sintering Temperature Study of Hot-Pressed Y-SiAlON Ceramics
Multi-Step Sintering Method Study of HP Y-SiAlON Ceramics
Preparation of ß-Sialon from Fly Ash by Carbothermal Reduction-Nitridation Reaction
Si3N4-BN-SiO2 Based Microwave-Transparent Materials
Wear Property of Superfine Grained Si2N2O-Si3N4 Composites
Preparation of SiOC Foam Ceramics Using Polysiloxane
Fabrication of MgSiN2 Powders via Combustion Synthesis Process
Preparation of SiBCN Microtubes from Melt-Spinnable Polymers
Layer Structure Growth of Orthorhombic Boron Nitride Thin Films by RF-PEPLD
Preparation of Microcrystalline CBN Abrasive
Property and Microstructure of Machinable B4C/BN Nanocomposites
Spark Plasma Sintered AlN-BN Composites and its Dielectric Properties
Micro Pattern Making Method on AlN-hBN Composites Using Powder Blasting Process
Machining Characteristics of AlN-hBN Composites in End-Milling and Precision Lapping Processes
Synthesis of SiCW/(Mo,W)Si2 Composite by the "Chemical Oven" Self-Propagating Combustion Method
Microstructure Change of Molybdenum Disilicide Heating Unit in Nitrogen Atmosphere at 1700°C
Sintering and Properties of MoSi2 Matrix Composites Reinforced by Carbon Nanotubes
Wear Behaviors of MoSi2 at Elevated Temperatures
Preparation of Titanium Diboride Reticulated Porous Ceramics
Influence of Microwave Sintering Environment on the Preparation of AlN Powder and Ceramic
Densification of Aluminum Nitride Ceramics with CaF2 Additive
Microstructure and Properties of AlN Matrix Composites Fabricated by Reaction Synthesis
Microstructure and Phase Composition of AlN/Al Composite Fabricated by Directed Melt Nitridation
Ablation Performance and Surface Texture of the Nitride Composites Reinforced by the Braided Silica Fibers
Fabrication of High-Content Ti3AlC2 Powders by Mechanical Alloying
Mapping of Composition, Phase Transitions and Properties in Oxidized Ti3SiC2
Preparation of Composites from Al and Ti3AlC2 and its Tribo-Chemistry Reactions against Low Carbon Steel
Synthesis, Structure and Properties of Ti3(SixAl1-x)C2 Solid Solutions
Synthesis of Ti3Si0.4Al0.8C1.8 Solid Solution
Pressureless Sintering and Properties of Cu/Ti3AlC2 Composites
Argon-Arc Welding of Cu/Ti3AlC2 Cermet
Fabrication of Ti2AlC/TiAl Composites with the Addition of Niobium by Spark Plasma Sintering
Preparation and Microstructural Evolution of Sol-Gel-Derived Enstatite Fibers
Wear Properties of Basalt Fibers Reinforced Composites
Preparation of Mg,Al-Hydrotalcite/PE-EVA Flame-Retardant Nanocomposite
Effects of CVD C or SiC on the Mechanical and Chemical Properties of Carbon Fibers
Damage of T300 Carbon Fiber during Precursor Pyrolysis
Effects of Pyrolysis Temperatures on the Microstructure and Mechanical Properties of 2D-Cf/Si-O-C Composites
Effects of Molding Pressure on the Microstructure and Mechanical Properties of 2D-Cf/SiC Composites by PIP Routes
Complex Permittivity of 3D Textile SiC/C/SiC Composites Fabricated by Chemical Vapor Infiltration at X-Band Frequency
Preparation of 3D C/SiC-Cu Composites via Precursor Pyrolysis and Property Investigation
Evaluation of the Microstructure of 3D-Cf/SiC Composites Fabricated by Precursor Infiltration and Pyrolysis
Improvement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon Composites
Influence of Carbon Cloth Filaments Upon the Properties of 2D C/SiC via Precursor Infiltration and Pyrolysis Process
Online-Joining of C/SiC-C/SiC via Precursor Infiltration and Pyrolysis Process
Preparation and Properties of Hot Pressed 2D C/SiC Composites
Preparation and Properties of 2D Carbon Cloth Reinforced Ultra-High Temperature Ceramic Matrix Composites
