Sonstiges, Englisch, Band Volumes 512-515, 2120 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
Sonstiges, Englisch, Band Volumes 512-515, 2120 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
ISBN: 978-3-03795-245-0
Verlag: Trans Tech Publications
This special volume presents the latest advances in the science and technology of high-performance ceramics. More than 600, already-excellent, contributions were further refined, using a strict peer-review process, to yield the almost 400 manuscripts included in this collection. The result is an incomparable guide to the subject-matter of the title.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preparation and Characterization of High Purity ?-SiC PowderSynthesis of Fiber-Like Si? by Carbothermal Reduction of Used Silica BricksMicrowave Synthesis of Nano SiC Doping Mg(B1-2x(SiC)x)2 Superconductor and SuperconductivityPreparation of Both Reactive a-Si3N4 and SiC Mixed Powder in Flame-Isolation Nitridation Shuttle KilnSynthesis of AlN Powder from Precipitation Precursor by Carbon Thermal Reduction in Flowing NitrogenSingle Phase Ti2AlC Powder Synthesized from Ti-Al-0.6~0.9TiC-0.1Sn MixtureSynthesis of Ti(C,N) Powder via CRN Method from Rutile/Carbon MixturesInfluence of the Dispersant on the Bead Milling of AluminaSynthesis and Surface Characterization of a Silica White Prepared from High Si:Al Fine PowderExtraordinary Adsorption Properties of Nano Porous Hydrophobic Silica AerogelsPreparation of Mullite Nanocomposites Powders by the Hydrothermal Crystallization Method from Coal GangueEffects of Solvents on Synthesis and Dispersion of Zircon Powder via Non-Hydrolytic Sol-Gel RoutePreparation of Rare-Earth Doped Zirconia Nanoparticles via Supercritical Hydrothermal Method for Luminescence PropertiesFabrication of Graphene/Zirconia Nanocomposite by Mixing Graphite Oxide and Zirconia Nanopowders and Pressureless SinteringStudy on Properties of Slurry for Making Zirconia FiberSynthesis of Amorphous Al2O3-ZrO2 Powders Prepared by Citric Acid Gel ProcessLow Temperature Molten Salt Synthesis of Nano Crystalline MgAl2O4Synthesis and Characterization of Magnetite Particles by Co-Precipitation MethodSynthesis and Characterization of Spinel-Type NiCr2O4 NanocrystallineEffect of MgO and NH4OH on Formation of 5Mg(OH)2?MgSO4?3H2O WhiskersHydrothermal Synthesis of Yttrium Hydroxide NanotubesPreparation and Thermodynamic Study of Self-Dispersal Nano-AIOOHSynthesis and Optical Properties of Single-Crystalline Silicon Nitride Nanowires with Controlled DimensionalityPreparation and Characterization of Calcium Silicate Slag Based Lightweight Wall MaterialsPreparation and Properties of Nano-Hydroxyapatite Derived from Sol-Gel Method for Cu2+ Polluted WaterReverse Microemulsion Synthesis of Hydroxyapatite Nanoparticles and Adsorption Performance StudyPhase Behaviors of Talc Minerals in Carbothermal Reduction ProcessCryomilling and Characterization of Metal/Ceramic PowdersSynthesis of Cubic Ni Nanoparticles by Electric Current Heating Method Using Ni WireEffects of Different Reducing Agents and Protective Agents on the Preparation of Nano-Silver PowderSynthesis and Characterization of Silver-Coated Copper Powder LayerSynthesis and Characterization of Nanocrystalline PZT Powders by a Simple Sol-Gel MethodEffect of Dispersant Content on Nanograined BME MLCC Powder Prepared by Aqueous Chemical Coating MethodPreparation of Ultra?Fine La3NbO7 Powder by Solid State ReactionSynthesis of Cobalt Sulfide Nanocrystallites via an Efficient Microwave Hydrothermal ProcessSolvothermal Growth of Cobalt Oxide Hexagon NanodiscsSynthesis of n-Hexadecylphosphonic Acid-Coated Monodisperse Fe3O4 Superparamagnetic NanoparticlesStructure and Luminescence Characteristics of Terbium Hydroxide Nanosheets Doped with Eu3+Luminescent Properties of MgLaLiSi2O7:Eu3+ Phosphors via Sol-Gel ProcessPreparation and Luminescence of ZnAl2O4:Mn PhosphorsPreparation and Photo-Catalysis Properties of Fe3O4/TiO2 NanocompositeTiO2 Whisker Prepared with Tataniferous Blast-FurnanceHydrothermal Synthesis and Characterization of LiZr2(PO4)3Effect of Acticarbon on the Electrochemical Characteristics of LiFePO4 Battery Powder by Microwave HydrothermalEffect of Cd2+ Concentration on the CdS Crystallites Prepared by Microwave Hydrothermal ProcessSynthesis of V2O5 Powders by EDTA Assistance Ultrasound Sol-Gel ProcessSynthesis of In2Se3/CuSe Composite Powder by Solvothermal MethodSynthesis and Characterization the Intercalation Compound of SnS2-Ethylenediamine by Hydrothermal ReactionSynthesis and Characterization of SnS Flake-Like Microcrystals with a Microwave Hydrothermal ProcessingInfluence of S/La Molar Ratio on the Morphology and Optical Property of La2S3 Microcrystalline Prepared by Microwave HydrothermalSynthesis of LiV3O8 Crystallites via an Improved Citric Acid Assisted Sol-Gel MethodEffect of pH Value on Preparation of La2CuO4 Microcrystallites Synthesized by Sol-Gel ProcessPhase Control of Nanosized NaYF4 Upconversion ParticlesPreparation and Property Characterization of Talc/Phthalocyanine Blue Composite PowderPreparing and Characterization of Hollow Ceramic MicrospheresBa?Ferrites Hollow Microspheres Prepared by Self?Reactive Flame Spraying MethodFabrication and Characterization of ZrO2 Hollow SpheresPreparation of Nanometer Carbon Spheres by Hydrothermal Synthesis MethodEffect of Dispersant on the Measurement of Particle Size Distribution of Titanium DioxideControlled Synthesis of Hierarchical Flower-Like CuS Spheres by a Facile Microwave Hydrothermal MethodPreparation of ZrO2 Micro Beads by Sol-Gel MethodSynthesis of Carbon Nanotubes from Silicalite-1-Coated SubstratesPreparation and Properties of Rigid Polyurethane Foams Reinforced by Sepiolite Minerals NanofibersPreparation and Characterization of Coated Carbon Black PigmentWet Foam Stabilized by Amphiphiles to Tailor the Microstructure of Porous CeramicsPreparation of M-AlN Suspensions for Aqueous GelcastingReaction Formed SiC Prepared by Room Temperature Freezing CastingThe Preparation and Assessment of the Rigid Aerogel Insulation CompositesSynthesis of Si-N-C Ceramic Composites by Pyrolysis of Polysilazane and PolycarbosilaneHigh-Strength Porous YSZ Ceramics Fabricated by TBA-Based Gelcasting with High Solid Loading SlurryPreparation and Microstructures of Nano-Porous SiO2 Thermal Insulation Materials by Freeze-Casting of SiO2 in TBA/H2O SuspensionsMaking Nano-Porous SiO2 Insulation through Filter-Pressing of Foamed SlurryPreparation of Thin Cordierite Sheets by Aqueous Tape CastingCalculation of Tape Thickness for Ceramic Tape CastingNovel Zn-Doped SnO2 Hierarchical Architectures: Facile Synthesis, Structural Characterization and Enhanced Photocatalytic PropertyAlumina Ceramic Texturing Induced by High Magnetic Field and its MicrostructureMicrostructures and Properties of Solidified TiC-TiB2 Ceramic Composites with Increasing Cr Metallic Binder Prepared by Combustion Synthesis in High-Gravity FieldFabrication of Bulk Ceramics by High-Gravity Combustion SynthesisFusion-Induced Diffusion Joints of Solidified TiC-TiB2 Ceramic with Stainless Steel and Ti-6Al-4V Alloy Achieved by Combustion Synthesis in High-Gravity FieldFabrication of Bi-2212 Films on Ag Substrate by Dip-Coating MethodStructural and Optical Properties of TiO2 Nanoarray Films Prepared by Liquid Phase DepositionInfluence of pH Value on the Phases, Morphologies and Optical Properties of Sm2S3 Thin FilmsEnhanced Performance of Alkaline Niobate-Based Ceramics Manufactured by Two-Step SinteringEffects of Sintering Process on the Properties of Ti3SiC2/Cu CompositeMicrowave Sintered Porous Mullite CompositePhase Transformation Temperature Adjustment of Calcium Chloride HexahydrateDirect Write Assembly of 3-Dimensional Structures with Aqueous-Based Piezoelectric InksGel Casting of Large-Sized, Complex-Shaped RBSC ComponentGelcasting of Fused Quartz Crucible with Large ScalePreparation and Mechanism of Interconnected Mesoporous Carbon Monoliths from Phenolic Resin/Ethylene Glycol MixturesSuperplastic Forming of Oxide Ceramic CompositeThe Effects of Different Slurry on the Joining Characteristics of SiC Green BodyMicrostructure and Mechanical Performances of C/C Composite and TC4 Alloy Brazed JointsEffect of Additive Silicon Powder on Physical Property of Cold Ramming Paste for Aluminum ElectrolysisPrediction of Critical Pressure in the Preparation of Composites by Vacuum - Pressure Infiltration ProcessDebinding Behaviors and Mechanism of Injection Molded ZrO2 Ceramics Using Kerosene as SolventsAging Properties of Yttria-Stabilized Zirconia CeramicsThe Influence of Y2O3 Calcined Temperature on the Performance of ZrO2Zirconia Fiber Memberance Prepared by ElectrospinningBond Strength of Different Adhesive Luting Materials to Zirconia CeramicsSolid Particle Erosion Behavior of NiCr-Al2O3-ZrO2 (8Y) Ceramic CompositesMechanical Properties of ZrO2?LaMgAl11O19 CeramicsFabrication and Optical Properties of Sm2Zr2O7-NiCr2O4Modeling the Cracking Process of the YSZ Thermal Barrier Coating under the Thermal Shocking LoadsDesign, Preparation and Thermal Properties of (La0.4Sm0.5Yb0.1)2Zr2O7 Ceramic for Thermal Barrier CoatingsElastic Properties of Spark Plasma Sintered (SPS) ZrB2/SiC-Sm2Zr2O7 CompositesThe Gibbs Energy Description of Nd:YAG SystemA Simple Laminated Alumina Based Composite with High Work of FractureCASTEP Calculation of Surface Energy of a-Al2O3Anti-Bullet Property of Encapsulated AD95 Al2O3 CeramicEffect of Different Composite Additives on Thermal Conductivity of Corundum CeramicsFormation and Evolution of Tribo-Layer on Al2O3 and Al2O3-Based Ceramics in Sliding against Si3N4 under Dry SlidingCorrosion Behavior of Al2O3 Ceramics in the Acid and Alkaline SolutionsHydrothermal Corrosion of Alumina Ceramics under Static and Quasi-Dynamic ConditionsInfluence of the Two Metal Dopant Improves the Specific Surface Area of Alumina in Catalyst SupportFabrication and Dielectric Properties of Fe-CNT/Al2O3 Bulk Composite MaterialsResearch the Performance of Alumina Insulation Material by Freeze-DryingThe Screening of Modifying Alumina Used in Automotive CatalystEffect of Calcination Temperature on Phase Transformation and Microstructure of Al2O3/GdAlO3 Compound Powder Prepared by Co-Precipitation MethodFabrication and Properties of CaAl12O19-Al2O3 Composite CeramicsThe Effects of Density on Thermal Conductivity of Al2O3 Fiber Composite PapersDielectric Properties of Silica Fiber Reinforced Silica CompositesEffect of Al3+ Additions on the Properties of Quartz Ceramics3D Interconnetive Porous Silica Ceramics Prepared by Gel Casting with Egg White Protein as a Foaming AgentDisposing of Silica Fiber? SurfaceSynthesis of Methacryloxypropyltrimethoxysilane Grafting Silica Cryogels Using Xylene as SolventSynthesis of Plugged Mesoporous SBA-15-Type Silicas from Sodium SilicateEffect of Pyrophyllite on the Mullite Generation in Ternary Porcelain SystemFabrication of Porous Mullite Ceramics with High Porosity Using Foam-GelcastingFabrication and Properties of Mullite Fiber-Reinforced Porous Mullite CeramicsFabrication and Properties of Porous Anorthite/Mullite CeramicsReinforcement of Porcelain by Mullite Fiber for Power ApplicationsA Novel Way to Synthesis Magnesium Aluminate Spinel Powders by Polymer Gel ReactionProperties of Boehmite AlO(OH) Nanoparticles as the Coatings and FillersThermal Properties of Magnesium Hydroxide Using First-Principles MethodRare Earth and Perovskite Composite Ceramics Applied for the Thermistor with Wide Temperature RangePreparation and Properties of MgAl2O4-CaAl12O19 High Temperature CompositeHollow Multiphase Ceramic Microspheres of Al+Cr2O3+SiO2 System Prepared by Self-Reaction Quenching TechnologySynthesis and Characterization of Double Pore Size Multiphase Materials from Waste Aluminum Slag and Activated CarbonEffect of Al2O3 Addition on Microstructure, Thermal Expansion and Mechanical Properties of Ta2O5 CeramicsHigh-Temperature Chemical Stability of Hf6Ta2O17 Ceramic for Thermal Barrier CoatingsMicrostructure and Properties of Laser Cladding Cu-TiB2 Composite Coating on CopperIon Irradiation Effects on Ho2+xTi2-xO7-x/2 (x=0, 0.4 and 0.67)Study on Mineral Composition and Main Mineral Morphology of Bauxite from ZhongXiang, HuBei ProvinceMineral Compositions and Textures of Jadeite Orebody and its Country Rock in Nammaw, MyanmarColorimetry Study on Red Tourmaline Color GenesisPreparation and Characterization of Activated Sericite Modified by Fluorosilicate and AcidEvaluation of Firing Temperature of the Bangsan PorcelainSynthesize Ti3SiC2 and Ti3SiC2-Diamond Composites at High Pressure and High TemperatureSynthesize Ti3SiC2 from TiH2 by Pressureless SinteringFabrication and Properties of Cf/Ti3SiC2-SiC Composites Using Ti3SiC2 as Inert FillerMicrostructures, Properties and Fracture Behavior of Solidified TiC-TiB2 Composites with Increasing Content of TiB2Crystal Growth, Fracture Behavior and Toughening of Rapidly-Solidified TiC-TiB2 Prepared by Combustion Synthesis in High-Gravity FieldTheoretical Calculation of Crystal Cohesive Energy of (ZrTi)B2 Solid-SolutionsTailoring Plate-Like Grained ZrB2 Ceramic via a Strong Magnetic Field Alignment Method Followed by Spark Plasma SinteringEffect of BN Short Fiber Content on Mechanical Properties of ZrB2-SiC UHTCsAblation Property of ZrB2-SiC Composite Sharp Leading Edges with Varying Radiuses of Curvature under Oxy-Acetylene TorchFabrication of ZrC-SiC Powders by Means of Liquid Precursor Conversion Method Using ZrC Precursor and PolycarbosilanePreparation and Assessment of C/C-ZrB2-SiC Ultra-High Temperature CeramicsEffect of High-Energy Ball Milling of ZrB2 Powder on the Microstructure and Mechanical Properties of ZrB2-SiC CeramicsStudy on ZrB2-SiC Prepared by Field Assisted SinteringEffect of Adding Phase on the Properties of ZrB2 Based Ultra-High-Temperature CeramicsPreparation and Properties of ZrB2-Cu Composites by Spark Plasma SinteringElectrical and Mechanical Properties of ZrB2-Based Composite CeramicInvestigation of Microstructure and Thermal Shock Resistance of the B4C/BN Composites Fabricated by Hot-Pressing ProcessA Multilayer Coating Method to Prepare Borosilicate Glass-Aluminum Composite Coating on Cubic Boron Nitride ParticleInfluence of the Content of B4C on Microstructure and Oxidation Resistance of Carbon/Carbon Composites Modified by a Sol-Gel/Solvothermal ProcessEffect of Carbon Fibers? Surface Modification on the In Situ Growth of Carbon NanotubesInfluence of Adding ?-Si? on the Performance of a-Si? Pressureless Sintering CeramicsEffect of Aging pH Value on the Properties of Porous SiC Ceramics Produced through Coat-Mix ProcessImproved Oxidation Resistance of Si?-Based Ceramic Matrix Composites by In Situ Reaction with Si3N4 FillerThe Dispersion of SiC Nanopowders in EthanolPreparation and Properties of SiC Nanocrystallite Reinforced Amorphous Si?B?C?N CeramicsSilicon Carbide Composites Deposited in Silicon Carbide Whiskers by CVI ProcessEffects of Carbon Fiber Dispersion on Bending Property of Cf/SiC Brake MaterialsMechanical Properties of Short Carbon Fiber-Reinforced SiC-Matrix Composites and Correlation to FibersPreparation of Cf/SiC Composites by Chemical Liquid-Vapor Deposition ProcessDesign on Thermal Protection Structure of C/SiC Lattice Composite MaterialsMicrostructures and Mechanical Properties of SiC-TiB2 Composite Prepared by Pressureless SinteringFabrication of High Strength a-SiAlON/BN Composition Ceramics by Hot PressingPorous Si3N4 Fabricated Using Benzoic Acid as Pore-Forming AgentPreparation of Silicon Nitride Porous CeramicsPreparation and Properties of Porous Si3N4/SiO2/BN Composite CeramicsElectric Conductive Si3N4/TiN Composite Ceramic Manufactured by Liquid-Qhase SinteringDispersion of Si3N4 Powders in Tert-Butyl AlcoholSintering Behavior and Properties of Si3N4 Ceramics with Yttrium Chloride AdditivePorous Nitride Ceramic Composites with Low-Dielectric PropertiesDielectric and Mechanical Properties of Porous Si3N4-BN Ceramic CompositesPreparation & Characterization of h-BN Coatings on Ti-Based Substrate Synthesized via the PDCs Route: Tribological Applications in Severe ConditionsFirst-Principles Investigation of Electronic Structural and Optical Properties of Rare Earth Doped ?-Si3N4 CrystalsHigh Performance Porous Wave-Transmitting Silicon Nitride Ceramics by Gel-Casting TechniquePressureless Sintering of Silicon Nitride Porous Ceramics with High Porosity and Bimodal Pore StructureThe Influence of Sintering Temperature on Properties and Microstructure of TiN/Si3N4 CompositeFirst Principles Investigation of Electronic Structure, Chemical Bonding, Elastic and Optical Properties of Novel Rhenium NitridesThermal Expansion of Anti-Perovskite Mn3Zn1-xSnxN CompoundsSynthesis of Polyceriborosilazane via Substitution and Polymerization and Pyrolysis to SiBCN(Ce) CeramicsFabrication and Properties of AlN/CNT Composite CeramicsHigh Frequency Dielectric Properties and Thermal Conductivity of AlN-BN Composites by Spark Plasma SinteringFabrication and Properties of Al2O3-SiC/Sialon Composite RefractoriesFabrication of the SiOC/HfO2 Ceramic Composites by the Sol-Gel MethodCarbon Fiber Reinforced Phosphate Porous Ceramic CompositesStudy on Thermal Insulating Behavior of Silica Glass Fiber/Aluminum Phosphate CompositeUltrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma SinteringWC-Ni-SiCw Alloys Prepared by Hot-Pressed SinteringTiCN-Based Cermets Strengthened with SiC Nano-Whiskers by Spark Plasma SinteringPreparation and Properties of Polyalcohol Phase Change Material for InsulationPreparation of Calcium Hexaluminate Using Al2O3 and White Beach Sand from Western Australia Preparation and Characterization of Amorphous SiO2 Coating SiCp/Cu CompositesThe Effect of SiC Surface Treatment on the Interface Bonding Behavior of SiC/Cu Composite ParticlesTwo Fracture Dynamics Problems of Fiber Reinforced CeramicsEvaluating Adhesion of Ceramic Coatings by Scratch TestingThe Pyrolysis Processing of Polycarbosilane Studied by TG, XRF, IR, XRD, and XPSGIAXD and XPS Characterization of sp3C Doped SiC Superhard Nanocomposite FilmAnisotropic Mechanical and Thermal Properties of Nd2SrAl2O7Experimental Study and Numerical Simulation on Fatigue Crack Growth Behavior of GH4133B SuperalloyThermophysical and Mechanical Properties of Carbonated HydroxyapatiteThermal Stability and Structure of Tellurite GlassPreparation of Light-Weight Forsterite Insulation Materials Through Extrusion ProcessingPreparation of Light-Weight Alumina-Spinel Refractory by Foaming ProcessInfluence of Calcium Addition on the Chemical Durability of the Model Alumino-Silicate Glasses in Aqueous SolutionsTransparent Oxyfluoride Glass-Ceramics Containing CaF2 Nano-Crystalline PhaseCharacteristics of CAS and Bi-Based Glass Frit as the Inorganic Binder of Alumina Insulation SlurryPreparation and Properties of Sintering Brick from Iron TailingsPreparation of Superhydrophobic SiO2 Coating on Stainless Steel SubstrateFabrication of Superhydrophobic Surface of TiO2 through Sol-Gel Process on Stainless Steel SubstrateStructure and Growth Kinetics Features of Ceramic Coatings Produced on Ti-6Al-4V Alloy by Plasma Arc OxidationMicrostructural Evolution and Mechanical Properties of Vertical-Cracked Thermal Barrier Coatings in Thermal ExposureEffect of Anisotropic Conductive Properties on Heat Transfer and Temperature Distribution of Coatings and SubstratesModeling Dynamic Behaviors of Reticulated Ceramic/Metal Composites (RCMC)Thermal Cycling Behavior of Sm2Zr2O7 Ceramics Thermal Barrier Coatings by APSPreparation and Investigation of High Emissivity Coatings Prepared by Plasma SprayingInfluences of Calcination Ambiences on Morphologies, Phase Composition and Contents of the Elements of Ceramic Coatings on Ti Alloy by Micro-Arc OxidationZrSiO4/SiC Oxidation Protective Coating for Carbon/Carbon Composites Prepared by Hydrothermal Electrophoretic DepositionSilica Coatings Pigmented with Core-Shell Particles for High-Temperature Radiation Heat ShieldsInfluences of Argon Ambience on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti Alloy by Micro-Arc OxidationThe Composition and Hardness of the Coating Containing Zirconia Produced by Micro-Arc Oxidation on Aluminium AlloyFabrication of Superhydrophobic Coatings on Copper SubstrateKinetic Analysis of Sulfation of Fe-Ca Based Sorbent for FGDThe Comprehensive Evaluation on Financial Performance of the Ceramic Company Based on Principal Component AnalysisMicrostructural Characterization of Diamond/SiC Composites Fabricated by RVIHot-Pressed Sintered SiC-Based Composites for Microwave Absorbing ApplicationDevelop Dual-Mode DGS Bandpass Filters Using High Quality Factor Aluminum Oxide Ceramic SubstratesEffects of Technique Parameters on Gelating Process of Cordierite Ceramics Derived from Sol-Microemulsion-Gel MethodEffective Electro-Magnetic Parameters for Microwave Absorbing CeramicsAnalysis of Absorption Properties for Magnetism-Absorbing Agents Mixed with Semiconductor ParticulateComparison Analysis of Absorption Properties for Microwave AbsorbentPreparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering MethodsThe Preparation of Flexible Substrate Using BaTiO3/Polymer Composites for Application in High Frequency DevicesEffect of Bi2O3-B2O3-CuO Additives on Dielectric Properties and Energy Storage of BaTiO3 CeramicsAntimony Doping Effect on Barium Strontium TitanateMicrowave Properties in BaO-TiO2 System Added by ZrO2 and WO3Synthesis and Characterization of BaTiO3-(Bi0.5Na0.5)TiO3 Solid Solution Based Dielectric CeramicsOn Preparation of SrTiO3 Thin Films with Self-Assembled Monolayers by Liquid Phase Deposition and its Dielectric PropertiesEffect of Annealing Treatments on the Physical Characteristics of (Ca0.8Sr0.2)TiO3 Thin Films by Sol-Gel MethodSynthesis of Bismuth Titanate Thin Films by Liquid-Phase Self-Assembled MonolayersSynthesis and Characteristics of MgO Coated BST-Mg2TiO4 Composite CeramicsInfluence of ZnO and Nb2O5 Additions on Sintering Behavior and Microwave Dielectric Properties of (Mg0.95Ca0.05 )TiO3 CeramicsEffect of P-Zn-La-Si-Al-N-Mg-Yb Oxides Additives on Sintering and Microwave Dielectric Behaviors of Nd(Co1/2Ti1/2)O3 CeramicsApplication of AC Impedance Spectroscopy for Characterization of BiNbO4 CeramicsPreparation and Microwave Dielectric Properties of Ca(Sm0.5Nb0.5)O3 CeramicsEffect of Sintering Temperature on Structure and Dielectric Properties of BZN CeramicsSAW Properties on X,Y,Z-Cut of Sr3(Nb,Ta)Ga3Si2O14 and Ca3(Nb,Ta)Ga3Si2O14 Piezoelectric CrystalFabrication and Study of BiNbO4 CeramicsEffect of Pre-Calcined Method on Dielectric, Ferroelectric, and Piezoelectric Properties of Lead-Free Piezoelectric Lix(K0.5Na0.5)1-x(Nb0.8Ta0.2)O3 CeramicsEffects of CuO Addition on the Microstructure and Microwave Dielectric Properties of MgTa2O6 CeramicsStudies on Structural, Microwave Dielectric Properties, and Low-Temperature Sintering of 1.52Li2O-0.36Nb2O5-1.34TiO2 CeramicZnTiO3 Doping Effect on Dielectric Properties of CCTO Ceramics via a Molten Salt ProcessDielectric Properties and Photocatalytic Activity of Single Phase BFO Prepared by Chemical CoprecipitationPreparation and Dielectric Properties of Cr Doped Multiferroic BiFeO3Properties of BiFeO3 Thin Films Prepared with Self-Assembled Monolayers by Liquid Phase DepositionPreparation of Nd and Co Co-Doped BiFeO3 Thin Films Co-Doping Nd and Co by Sol-Gel MethodDensity-Functional Studies of Cr Adsorbed on Polar ZnO SurfacesStudy on Electronic Properties of ZnO Doped with Cr, Mn and Co by First PrinciplesLa Doped Layered Structure Low-Voltage ZnO VaristorSolid-State Reaction and Gas Sensor Properties of Porous SnO2-In2O3 CompositesDonor Solid Solubility and Microstructure of Nb-Doped TiO2 Ceramic VaristorB2O3-Doped ZnO-Pr6O11 Based Varistor CeramicsFabrication and Electrical Properties of Vanadium Pentoxide FibresFailure Behavior of PZT 95/5 under Direct Current, Pulsed Electric Field and Shock CompressionSynthesis and Electrical Properties of PZT/BaFe12O19 Multiferroic CeramicsDesign of the PTO/PZO Ferroelectric Superlattice AssemblyEffect of Glass Additive on Electrical Properties of PLZST Antiferroelectric CeramicsThe Electrocaloric Effect in BaTiO3 Thick Film Multilayer Structure at High Electric FieldInfluence of Lanthanum Concentration on Properties of BLT ElectroceramicsElectrical Characteristics and Microstructures of Pr6O11-Doped Bi4Ti3O12 CeramicsElectrical and Physical Properties of the Bi3.25La0.75Ti3O12 Ferroelectric Thin Films Prepared by Conventional Temperature Annealing ProcessFerroelectric and Physical Characteristic of the La and V Doped on Bi4Ti3O12 Thin Film Prepared by RF Magnetron Sputtering MethodFerroelectric Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 Thin FilmsElectrical Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 CeramicsFerroelectric Properties of Bismuth Titanate Ceramics by Sm3+/V5+ SubstitutionPiezoceramic Stack Actuators for Micropositioning StageDamping Properties of Epoxy-Embedded Piezoelectric CompositesMicrostructure and Electrical Properties of Porous PZT Ceramics with Unidirectional Pore Channel Structure Fabricated by Freeze-CastingElectrical and Physical Properties of Lead-Free (Na0.5K0.5)NbO3- Bi0.5(Na0.93K0.07)0.5TiO3 CeramicsSol-Gel Derived Li2O Doped BNT-BKT-BT Ceramics: Microstructure and Piezoelectric PropertiesPreparation and Mechanical Energy Harvesting of BaTi0.9Zr0.1O3 Ceramic NanofibersPhase Transitions, Dielectric and Piezoelectric Properties of BiScO3-PbTiO3 Ceramic Solid SolutionsEnhanced Piezoelectric Properties of CaBi2Nb2O9 with Eu Modification and Templated Grain GrowthProcessing and Electrical Properties of Ta and Li-Modified KNN-Based Lead-Free Thin Films Prepared by the RF Sputtering TechnologyImpedance-Frequency Spectrum and Soft/Hard Doping Characteristics of Lead-Free K0.5Na0.5NbO3-LiSbO3-BiMnO3 Piezoelectric CeramicsInfluence of Sintering Conditions on Electric Performance of Textured 92BNT-6BT-2KNN CeramicsPiezoelectric and Strain Properties of Strontium-Doped BZT-BCT Lead-Free CeramicsEnhanced Piezoelectric Properties of (Na0.535K0.485)0.905Li0.095(Nb0.94Ta0.06)O3 ?(Na0.5Bi0.5)TiO3 Lead-Free Piezoelectric Ceramics in the MPB CompositionSynthesis of Single-Crystalline Plate-Shaped K0.5Na0.5NbO3 Particles by Multi-Step Molten Salt MethodInfluence of Ta5+ Doping on the Piezoelectric Properties of KNN CeramicsStudy on the Pressureless Sintering and Properties of (K0.5Na0.5)1-xLixNb1-yTayO3 Lead-Free Piezoelectric CeramicsDoping Effect of W6+ Ions on Microstructural and Magnetic Properties of Mn-Zn FerritesCalcium Behaviors in MnZn Ferrite at Different TemperaturesEffects of Eu3+ Substitution on Nanosized Mn-Zn Ferrite Powders Synthesized by Combustion ProcessingMolten Salt Synthesis of Ni0.5Zn0.5Fe2O4 FerritesEffect of SiO2 Content on the Electromagnetic Properties of CoZn-Z Type Barium Ferrite Prepared with Ferrous Micro-BeadsFabrication of Iron Carbide and Nitride Ceramics with Controlled Magnetic Properties by the Non-Oxide Sol-Gel ProcessThe Structure and Ferromagnetic Properties of the Single Phase Bi0.95Eu0.05Fe0.95Co0.05O3 Nanoparticles Prepared by Sol-GelRoom-Temperature Ferromagnetism in Co-Doped SrTiO3 NanofibresStudy on Magnetic Liquids Properties for Sensor DesignStudy on Magnetic Fluid Static Seal of Large GapStructure Design of Magnetic Fluid Static Seal at Large Diameter FlangeThe Experimental Study of the Magnetic Fluid Damper Based on the Principle of Second-Order BuoyancyExperimental Study on the Second-Order Buoyancy of Magnetic FluidProperties of Fluorinated Surfactant and Wetting Effect on Fe3O4 NanoparticlesStudy on the Structure of the Magnetic Fluid DamperEffects of Magnetic Fluid on Magnetic Fluid DamperPhotoluminescence of ZrO2-ZnO Hybrid Nanotube Arrays Produced by ElectrodepositionEffects of Sm3+ Doping on the Photoluminescence Properties of Ca9Eu1-xSmx(VO4)7 Red-Emitting PhosphorsEffects of PEG on Properties of SrAl2O4:Eu2+, Dy3+ Long Afterglow Phosphors Prepared by Combustion SynthesisThe h-BN Protective Method Used for the Synthesis of Highly Uniform Spherical Si-Based Oxynitride PhosphorsZinc Oxide Films Doped with Aluminum, Gallium or Tin Prepared by Dip Coating Process Using Ethanol SolutionThe Synthesis of TiO2 Nanoarray Films on Glass Substrate by Anodic Oxidation MethodPhotoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET SubstratesLuminescent Properties of Ce Doped LuAG Thin Films Prepared by Pechini Sol?Gel MethodPreparation and Characteristic Development of Nano Zn2SiO4: Mn Green Phosphors by La2O3 DopingRelationship between Infrared Radiant Properties in Different Waveband and Structure of Fe?Co?Ni?Cr SpinelsRelationship between Structure and Infrared Radiation of Fe?Mn?O CeramicsThe Preparation of ZnO Nanopowders and Dye Sensitized Solar Cells By Sol-Gel MethodLight Scattering Properties for PLZT Transparent Ceramics of Different Zr/Ti RatiosRecovery and Separation of Si and SiC in Wire Cutting Waste Slurry from Photovoltaic SiliconFabrication of ZnO Nanospheres and Application to Dye-Sensitized Solar CellsProperties of Yttria-Stabilized-Zirconia Based Ceramic Composite Abradable CoatingsPreparation and Performance of Ni-YSZ/YSZ Co-Ceramic Using Multiple Gel-Tape CastingFabrication and Properties of Ba(Zr0.63Ce0.27)Y0.1O3-d/ZnO Electrolyte MaterialsElectrical Conductivity and Characterization of CeO2 Doped 8YSZ Electrolyte with 2%wt CuO DopingFuel Processing in Direct Methanol and Carbon Deposition Behaviour on Ni/CeO2-ZnO Anodes for Solid Oxide Fuel CellA Study on Electrical Resistivity of BaO?CaO?SiO2?Al2O3 Seal Glass Used in Solid Oxide Electrolytic Cell (SOEC)Application of Rape Pollen in Anode Substrates of Solid Oxide Fuel CellSynthesis of Sr2Fe1-xMnxNbO6-d Powders and their Stability as Electrode of Solid Oxide Electrolysis CellHydrothermal Synthesis of Li2MnSiO4 Powders as a Cathode Material for Lithium Ion CellsMixtures of TiO2?0.2H2O and LiFePO4 as Li-ion Battery Cathode MaterialsApplication of Electrochemical Impedance Spectroscopy in Organic Solar Cells with Vertically Aligned TiO2 Nanorod Arrays as Buffer LayerMagnetron Sputtering of Tantalum Oxide Thin Electrolyte Film for Electrochromic ApplicationsApplication of Three-Dimensional ZnO Inverse Photonic Crystal in Dye-Sensitized Solar CellsPhotovoltaic Performance Optimization of Natural Trollius Sensitized Solar CellsStability of Dye Sensitized Solar Cells with Glass Frit SealantEffects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure DryingManufacturing Technology for Niobium Oxide Electrolytic Capacitor and Several Correlative MechanismsAn Energy Storage Material Fabricated by Coating Ba0.40Sr0.60TiO3 Nano Particles with Aluminum Oxide Doped with Zinc Oxide ShellFacile Synthesis of Hierarchically Macro/Mesoporous Carbons by Polymerization-Induced Phase Separation Combined with Starch TemplateThe Thermoelectric Performance Enhancement of N-Type BiTeSe Alloys by Addition of ZnAlOThe Influence of RuO2 Addition on the Thermoelectric Properties of BiSbTe AlloysInfluence of Operational Parameters on Oil-Water Separation Efficiency of Titanium Oxide Modified Alpha-Alumina Microfiltration MembraneFacile Fabrication of Open-Ended High Aspect-Ratio Anodic TiO2 Nanotube Films and their ApplicationsThe Effect of Acid Etching Process on Surface Morphology and Electrocatalytic Capability of RuO2-IrO2-TiO2/Ti AnodeThe Effect of Sintering Temperature on Microstructure and Electrocatalytic Capability of RuO2-IrO2-TiO2/Ti AnodeSynthesis of Nano-Sized SrTiO3 Photocatalyst by Sol-Gel MethodPhotocatalytic Enhancement in Methylene Blue Degradation of TiO2 Photocatalysts via Graphene HybridizationInfluence of Microwave-Hydrothermal Temperature on Synthesis of TiO2 Thin Films on PMMA Substrates from Colloidal Anatase Aqueous SolutionsLoad TiO2 or TiO2-N on the Porous CarbonPores Formation Mechanism of Undoped TiO2 CeramicsFabrication of Oxide Compound Nano-Films Materials by LBL Self-Assembly TechnologySuper-Hydrophilic Lu3+-Doped TiO2 Photocatalysts for Self-Cleaning ApplicationsEffect of Testing Conditions on ZnFe2O4 Film Photoelectrocatalytic PropertiesEnhanced Visible Light Activity of Ag-Loaded TiO2 Nanotube Arrays by AC ElectrodepositionPreparation of Nano-ZnFe2O4 Doped TiO2 Photocatalytic Films on Porous HaydditesFabrication of Li2TiO3 Ceramic Pebbles by Gelcasting MethodZrC Oxidization Mechanism in AirBiomimic Enamel Remineralization by Hybridization Calcium- and Phosphate-Loaded Liposomes with Amelogenin-Inspired PeptidePreparation of Patterned BiFeO3 Thin Films on the Functional Silicon Substrates SurfaceEffects of Annealing Temperature on Morphology and Dielectric Property of BiFeO3 FilmsPreparation of Mineralized Electrospun PCL/Gelatin Scaffolds via Double Diffusion SystemFabrication and Mechanical Properties of Chitosan-Montmorillonite Nano-CompositeMatching Ability of Dental Shaded Zirconia Ceramics and Veneering PorcelainInfluence of Low Temperature Aging on the Flexural Strength of Y-TZP CeramicsAffection of Post-Core Materials on the Resultant Color of Lithium Disilicate Ceramic RestorationsEffect of Zirconia Surface Roughness on Shear Bond Strength to Resin CementsEffects of Alveolar Bone Loss and Post-Core Design on Stress Distribution of Severely Damaged CanineRelative Translucency of Dental Lithium Disilicate Ceramic RestorationsIn?uence of Thickness on Residual Stress Pro?le in Veneering Ceramic Layered: Measurement by Hole-DrillingMasking Ability of IPS e.max ALL-Ceramics System of HO SeriesThe Influence of Background Color to 3 All-Ceramic System Core MaterialsThe Transmittance Test of 3 All-Ceramic System Core MaterialsEffects of the Mechanical Properties of Veneering Porcelain on Stress Distribution of Dental Zirconia Layered Structure: A Finite Element Model StudyPreparation of Pigmented Glass for Infiltration and Investigation of its Physical and Mechanical PropertiesColorimetric Comparison of Two Kinds of VITA Shade GuidesCorrosion Behavior of Mesoporous Hydroxyapatite Coated AZ31 Magnesium AlloysImproving Bioactivity of Porous ?-TCP Ceramics by Forming Bone-Like Apatite Layer on the Surfaces of Pore WallsPreparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried ?-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering ScaffoldsInfluence of Surface Composition of Silicon-Based Material on their Bioactivity
