Buch, Englisch, 436 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 900 g
Buch, Englisch, 436 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 900 g
ISBN: 978-3-03835-413-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface, Committee and Sponsors
Chapter 1: Residual Stresses - Measurement Methods and Analysis
Utilisation Possibilities of PhotoStress Method in Determination of Residual Stresses
2D Residual Stress and Hardness Maps in Steel Laser Weld with Filler Wire
Neutron Diffraction Studies of Residual Stress Distribution in the Vicinity of the Single Pass Fillet Steel Welds
Analysis of Differential Method Used for the Evaluation of Uniform Residual Stresses by the Ring-Core Method
Uncertainties of the Evaluation of the Hole Drilling Residual Stress Measurement According to the ASTM E837 Standard
Residual Stress Analysis in Containers for Transport of Radioactive Materials
Theory of Hole-Drilling Strain-Gage Method for the Using of Semiconductor Strain Gauges
Chapter 2: Development of Experimental Methods of Analysis in Mechanics of Materials
Experimental Investigation of Mechanical Properties of Textile Glass Reinforcement
Numerical and Experimental Analysis of Multilayer Mine Protection
Experimental Analysis of Hydrothermal Curing Influence on Properties of Fiber-Cement Composite
Experimental Determination of Mechanical Properties for the Purposes of Numerical Simulations of Car Bumper Tests
Effectiveness of the Modified Fatigue Criteria for Biaxial Loading of Notched Specimen in High-Cycle Region
Wiles of Using Hollow Specimens for Fatigue Tests
Digital Image Correlation as a Measurement Tool for Large Deformations of a Conveyor Belt
Development of Mechanical Properties of Cement Paste with Different Addition of Polyvinyl Alcohol
Experimental and Numerical Investigation of Critical Buckle Load of Composite Specimens
Experimental and Numerical Study of Uniaxial and Multiaxial Stress-Strain Behaviour of R7T Wheel Steel
Experimental Analysis and Numerical Modelling of Interphase Interfaces of New Environmental Low-Energy Composites
Experimental and Numerical Investigation of Sheet Metal Behavior under Cyclic Tension-Compression Loading
Mechanical Properties of New and Recycled PIM Feedstocks
Influence of Combined Mean Stresses on Lifetime under High-Cycle Fatigue
Effects of High Temperature Treatment on the Mechanical Properties of Basalt Fiber Reinforced Aluminous Composites
Micromechanical Properties of Spruce Tissues Using Static Nanoindentation and Modulus Mapping
Performance of Stabilized and Non-Stabilized PVA Nanofiber Textiles Subjected to Tension
Impact of Anisotropy on the Elastic Modulus of Basic Woven Fabric Structure
The Analyses of Pure Shear Behaviour of E-Glass Woven Fabrics by Picture Frame Test
A Semi-Analytical Prediction of Wear Rate of an Inductively Hardened Wheel Steel under Rolling Contact
Experimental Study of Mechanical Behavior of HPL Composites
Stress-Controlled Fatigue Testing of E-Glass Epoxy Composite: Monitoring of Micro-Damage
Chapter 3: Development of Experimental Methods of Analysis in Biomedical Engineering
Characteristics of PU Foam at Long Term Static and Dynamic Loading
About the Verification of External Fixators Applied in Traumatology and Orthopaedics
Effect of Polyvinyl Alcohol Concentration on the Mechanical Properties of Collagen/Polyvinyl Alcohol Blends
FEM Modelling and Experimental Analysis of Mechanical Properties of Artificial Blood Vessel
Chapter 4: Methods and Means of Analysis the Static and Dynamic Loads of Mechanical Structures and Machines
Estimation of Crack Depth and Profile Using DCPD Method in Full Scale Railway Axle Loaded by Rotating Bending
Static and Dynamic Experimental Stress-Strain Analysis of Axles Loaded by Rotation Bending
The Influence of Facet Size and Filtering on the Results of Strain Fields’ Investigation Performed on Small Surfaces Using Digital Image Correlation
Identification of Coupled Mode Shapes Based on Complex Mode Indicator Function
Creep Deformation of High Pressure Steam Turbine Part
Driver Seat Differential Pneumatic System with Air Damping
Experimental Analysis of the Operational Loads on Agricultural Machine
Comparison of Various Means of Attachment of High Temperature Strain Gauge
Experimental Determination of Wheel and Guiding Forces on the Tracks
Damage and Localized Corrosion in Steam Turbines
Development of the Bus Sandwich Roof Experimental and Numerical Approach
Analysis of the Operational Loading of the Strip Mine Conveyer Drive
Numerical Modelling and Experimental Measurement of Lifting Platform Construction for Car Relocation
Stress and Motion Analysis of Tram Gearbox Hinge
Measurement of Aircraft Propeller Dynamic Loading
Experimental Analysis of Gear Loading in Planetary Transmission
Analysis of the Tailgate Frame Composite Tube Mechanical Properties
Experimental and Numerical Investigation of Response of Sandwich Composite Beam Subjected to Low-Velocity Impact
Modal Parameter Analysis for Underdamped Mechanical Systems
Vibroisolation of Vibratory Conveyors
Experimental Tests and FEM Simulations of Flank Breakage on Tooth of Gears with Respect to Different Nitrided Depths
Experimental and Numerical Analysis of Vibration of the Test Stand
Investigation of the Dynamic Behaviour of Fibres Using Simple Mechanical Systems
Use of MBD Programs in Solving General Unbalance Simple Mechanical System
Design and Implementation of Testing Stand for Gearboxes of Railway Vehicles
Dynamic Operational Testing of Agricultural Trailer on a Testing Polygon
Vibration and Noise Reduction Analysis of Sheet Metal Structures with Damping Layer
Assessment of Reliability and Overall Life-Time of the Turbo Generator in the Kamy´k Power Station
Assessment of Reliability and Overall Life-Time of the Turbo Generator in the Lipno Power Station
On the Performance of Single-Lap Bonded Joints with Embedded Optical Fibers
Failure Probability of Structure and its Model
Probabilistic Verification of Structures with Respect to Durability
Chapter 5: New Methods of Researching and Designing in Structural Mechanics and Mechanics of Constructions
Non-Destructive Testing of Composite Gypsum Material Properties – Long Time Measurement
Probabilistic Parametrical Assessment of FRC Specimens
Non-Destructive Testing during the Hardening of Alkali-Activated Slag
Experimental Evaluation of Tensile Forces in Short Steel Rods
Use of Digital Image Correlation to Track Strain Evolution in Compressed Masonry Piers
Flexural Strength of Float Glass
Experimental Verification of a Computing Model
Do we still Need an Experiment at All?
Dependence of Load Bearing Capacity on Homogeneity of Steel Fiber Distribution
Finite Element Transient Dynamic Analysis of Laminated Composite Plates
Effect of Distribution of Knots on the Strength of the Glued Laminated Timber Beams
Methods of Non-Destructive Assessment of Timber
Influence of Adhesive Type on Flexural Properties of Sandwich Structures
Characteristics of Fiber Reinforced Cementitious Composites in Dependence on Casting Direction
To Monitoring the Degradation of UHPC Boards with Textiles Armatures
Creep of Cement Pastes with Content of Fly Ash one Year Old
Determination of Permeability Properties of Concrete Surface Modified by CPF
Compression Testing of Gypsum-Based Composite Reinforced by Recycled Wires from Automobile Tires
Cohesion of Composite Reinforcement Produced from Rovings with High Performance Concrete
Experimental Study of Primary Lining Tunnel Concrete after Thirty Years of Operation
Optimization of Fly Ash Properties for the Use in Cement and Concrete
Estimation of Water Absorption Capacity of Hardened Concrete with Recycled Aggregate Based on Experimental Determination
Chapter 6: Innovation in Teaching of Applied Structural Mechanics
New Ways of Teaching Statics and Applied Structural Mechanics to Architects
