Buch, Englisch, 908 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1650 g
Buch, Englisch, 908 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1650 g
ISBN: 978-3-0357-1840-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Metals and Alloys, Metallurgical and Metalworking Technologies
The Formation Energy of Martensite Nuclei and the Phase Transition Kinetics under the Action of an External Magnetic Field
Research of Alternative Options for Strengthening Surface Treatment of Cast Iron Products
Predicting Strength of Titanium Alloys Using Aluminum and Molybdenum Equivalents at Operating Temperatures
Mechanism of EDM Intensification at Ultrasound Application
Investigation of Uneven Properties of Stainless Steel 12Kh18N10T Depending on the Thickness of the Sheet
A Study of the Influence of Local Heat Treatment on the Structure of Welded Titanium Pipelines
Truck Synchronizer Rings Recovery by Plastic Deformation Technology
Aspects of Superplasticity of Metals
Analysis of Remagnetization Processes of High-Anisotropic Alloy after Heat Treatment
Enhancing Mechanical Properties of Various Sintered Pellets with Nano-Additives
On Question of Metals’ Plasticity
Application of the Hydraulic Diameter of Interdendritic Space for Calculating the Ultimate Tensile Strength of Gray Cast Iron
Strains under Angular Pressing of a Strip from a Cylindrical Billet
Application of Thermodynamic Modeling for Optimization of the Composition of Nanostructured Low-Alloyed Hafnium Bronzes by High-Pressure Torsion
Study of the Main Reasons for the Consumption of Graphite Electrodes in Electric Arc Steel Furnaces
Improving Efficiency of Rolling Production by Predicting Negative Technological Events
Relationship between Kinematic Viscosity and Cluster Size in Multicomponent Metal Melts
Analysis of Defects at Laser Welding of Heat-Resistant Alloy KhN45VMTYuBR
Development of a Mathematical Model for a Workpiece Heating and Cooling in a Protective Medium while Treatment under Pressure
Microstructure Evolution and Mechanical Properties of Titanium Nickelide during Pressing in Equal-Channel Angular Matrix with Quasi-Small Angle of Channels Intersection
Nickel-Based Slag-Remelted Superalloy for Ti-Alloys Isothermal Forging Die-Tool
Explosive Stamping Goals and Objectives Historical Transformation (to the 70th Anniversary of KhAI Scientific School)
Determining the Metal Corrosion Rate by Various Techniques and Comparison of the Results
The Study of the Metal’s Flow Distribution during Rolling in Cutout Strikers for Different Schemes of the Stress State
Simulation of New Multilayer Waveguides by Explosion Welding
Research the Effect of Speed Mismatch during Continuous Rolling on the Plasticity Margin
Structure and Phase Transformations in High Nitrogen and High Interstitial Steels of Different Alloying Systems - Short Review
Technology of the Contact Wire Manufacture for High-Speed Railways
To the Issue of Low-Alloyed Copper Alloys for Contact Wires
Specific Features of Statistical Analysis of Relative Grain Boundary Energies Obtained by Scanning Tunneling Microscopy
Development of Advanced Technologies for the Production of Innovative Materials with a Submicrocrystalline Structure by Methods of Severe Plastic Deformation
Effects of Heat Treatment on Microstructure Parameters, Mechanical Properties and Cold Resistance of Sparingly Alloyed High-Strength Steel
Liquation and Crystallization Cracks in Aluminum Alloy AA2024 during Selective Laser Melting
The Repair of Defects in High-Manganese Steel Castings by Welding Technology
Phase Transformations and Microstructure of the Alloyed Steels for Mining Application
Mechanical Properties of a Mild-Alloy Steel for Aerospace Engineering
Simulation of Thermal Cooling Curves in the Process to Ordering Alloys by the Monte Carlo Method
Thermodynamic Analysis of Siderite Ore Carbonate Decomposition Process at Roasting
Use of Lebedinsky Mining and Processing Works Overburden Chalkstone for Iron-Ore Pellet Fluxing
Thermal Analysis of Al-5Ti1-1B Ligature
Study of the Boron Effect on the Physicochemical Properties of Ligatures
Methodology for Evaluation of Treated Steels and Alloys in Abrasive Processing
The Degassing Laws for Railway Wheel Steel in a Vacuum Tank Degasser
Improvement the Round Bloom Continuous Casting Technology at JSC “Ural Steel”
Solid-Phase Reduction and Separation of Iron and Phosphorus from Manganese Oxides in Ferromanganese Ore
Theoretical and Experimental Studies of Sulfur and Boron Distribution between the Slag of the CaO-SiO2-B2O3-MgO-Al2O3 System and the Metal
Effect of Basicity and Boron Oxide in Slags of the AOD Process on the Equilibrium Interphase Distribution of Sulfur and Boron
Influence of Rotary Friction Welding Parameters on Tensile Strength and Length of TMAZ of Dissimilar Welded Joints from 32G2 and 40KhN Steels
Investigation of the Influence of Ultrasound Action on Diffusion Processes in an Explosion-Welded Bimetal System Cu-Al during Heat Treatment
Technologies for the Production of Non-Annealed Pellets
Aging of the OT4-VT23, VT6-VT23, VT19-VT23 Titanium Welded Pairs
Microstructure, Phase Composition, Physical and Mechanical Properties of Titanium Alloy VT23 Hot-Extruded Tube
Research of the Process of Production of Steel Square Continuous Billets for Rolling Balls of Large Diameter
Regularities of the Influence of Substitutional and Interstitial Alloying Elements on the Corrosion Properties of Austenitic Stainless Steels
Analytical Evaluation of Strengthening, Local Internal Stresses and Microderformations in Welded Joint Metal during Wet Underwater Welding
Features of High-Temperature Synthesis in Clad Mechanocomposites of Ti-Al System
Surfacing of Ti-Al System Mechanocomposites by Magnetron Deposition
Influence of Residual Stresses on the Weld Metal Hardness of 5V Titanium Alloy
Determining Residual Stresses in Weld Joints of DN 850 Pipes by Spot Drilling Combined with Electronic Speckle Pattern Interferometry
Modeling a Free Burnishing of a Powder Hollow Cylinder
Development of Calibration Knives for Hot Cutting Shears
Chapter 2: Hydrometallurgy and Chemical Technologies
Hydrogenation of Para-Nitrotoluene on Catalytic Systems Containing Oxides of Rare Earth Elements
Nickel Sorption from Sulphate Solutions of Oxidized Nickel Ores Leaching
To the Issue of Mathematical Modeling of the Red Mud Thickening Process
Refining of Primary Aluminum from Vanadium
Fine Silver Powders Production
Fine Copper Powders Production
Granulometric Characteristics Study for the Particles of the Cu2-xS - Fex+1S System
Chapter 3: Surface Engineering and Coatings
Development of Hardening Technology for Oil and Gas Pumping and Compressor Equipment Using Laser Hardening
The Influence of Friction Deformation on the Microstructure and Hardening of Beryllium Bronze
Effective Wear Resistance Parameters of Ion-Plasma Tribological Coatings
Laser Hardening of Stamps in the Conditions of a Large Engineering Company
Hardness of the Powder Coating PG-CP4 Applied to Steel 40H13 and Subjected Laser Treatment
Contact Surfaces Preparation in Manufacturing of Bimetallic Strips CuZn10 Brass - C22E Steel - CuZn10 Brass
Targeted Alternation in Properties of Solid Amorphous-Nanocrystalline Material in Exposing to Nanosecond Laser Radiation
Multiple Reflow Influence over the FeCoCrAlTiCuNiMo Coating Obtained by Plasma Metallization on its Wear Resistance under Dry Friction
Friction Coefficient of the Coating PG-CP4 Sprayed to 40H13 Steel by Plasma and Processed by Laser
Mechanical Properties of Laser Treated Thin Sample of an Amorphous-Nanocrystalline Metallic Alloy Depending on the Initial Annealing Temperature
The Principle of Choosing the Composition of the Protective Coating for Die Casting Molds
Application of Multi-Element Targets for the Formation of High Entropy Coatings
Heat Resistance of Steel N8G6M3FTB Obtained by Surfacing Cored Wire
Modification of Titanium Surface by Ion Implantation
Structure and Phase Composition of the Al-Ti System Composites after Heat Treatment
Evaluation of the Heat Resistance of the Fe-Cr-Al System Coatings
Formation of the Diffusion Zone in Explosion Welded Composite Cr20Ni80 - AD1 at Liquid-Phase Interaction
Formation of TiO2 Coating by the Sol-Gel on Carbon Fibers
Effective Polymer Protective Coatings
Effect of Coatings on the Performance of Injection Molds
Effect of Heat Treatment on the Structure and Properties of the Carburized Layer of the Legs of Three-Ball Drill Bits
The Surface Hardening of Parts of Liquid Dampers Made of High-Strength Steels
Sacrificial Protection Efficiency Calculations Based on the Results of Stochastically Simulating the Parameters
Confirmation of Hydrogen Embrittlement Mechanism for Stress Corrosion Cracking of Gas Main Lines
Modeling Mechanical Properties of Multilayer Coatings TiAlN
Chapter 4: Polymers and Composites
Studies of the Influence of High Temperatures and Aggressive Media on the Performance Properties of O-Rings Used in the Automotive Industry
Mechanical Properties of Barley Straw/HDPE Composites Produced with Extrusion Process
The Usage of Modern Inorganic Composite Material in the Design of Insulation of Unheated Smoke-Free Stairwells
Influence of Fillers on the Viscosity Properties of One-Pack Polyurethane Sealants
A Study on Chemical Ageing of Composite Ribbed GFRP Bars under Load
Research of the Mechanical Properties of the Filament from the Percentage of Filling when Prototyping Machine Parts
Functional Properties of Elastomers Based on Butadiene-Nitrile Rubbers
Investigation of Deformation Work in Layers of Explosion-Welded Composite Al-Cr-St3
Mathematical Model for Determining the Colorimetric Characteristics of Composite Materials Based on PLA and Wood Filler
Experimental Study of Tensile Preloading Influence on the Mechanical Behaviour of Pseudo-Ductile Hybrid Composite under High-Velocity Impact
Experimental and Computational Study of Ultra-Low-Cycle Fatigue of Fabric-Reinforced GFRP
To Problem of Filler Failure in Processing of Fiber-Reinforced Materials
Composite Membranes with a Cellulose Acetate Working Layer on a Nylon Substrate
Comparative Analysis of the Physical and Mechanical Properties of Composites with Functional Fillers Based on Waste
Effect of Mechanical Activation and Gamma-Irradiation on Structural-Phase State of Ti-Al-C Powder Reagents
Mechanical Behavior of Active and Passive Strain Sections in CFRP Laminate under Uniaxial Tension
Ozone Resistance of Vulcanizates Based on XNB Rubber
Influence of Tool Blunting on the Value of the Axial Component of the Cutting Force and the Drilling Process
Chapter 5: Ceramics
Utilization of Porcelain Tile Polishing Residue
Felsite in Ceramic Materials Production
Structure and Phase Composition of Ceramics Made of Powder Obtained by Chemical Dispersion of V95 Alloy
Magnetic Study on Divalent Ion Substituted Barium Hexaferrites
Effect of Phosphorus on Crystallization of Alkaline Molybdenum-Containing Borosilicate Glasses
Thermodynamic Assessment of Phase Equilibria in the SrO-Al2O3 System
Milling Duration Influence on Strontium Hexaferrite Technological Characteristics
Chapter 6: Materials and Technologies in Opto- and Microelectronics
Features of Melt Droplet Formation during Electrical Destruction Aluminum Films on the Semiconductor Surface
Influence of Laser Radiation on Movement of Dislocations in Silicon Single Crystals
Collection of Laser Ablation Products by Means of an Electrostatic Field
Pulsed Laser Deposition of Thin-Film Coatings in an Electrostatic Field
Methods for Properties Analysis of Crystalline Materials Based on Solid Solutions of Silver and Thallium (I) Halides
Inorganic Composites Luminophors in Lithium-Borate Glasses with Rare-Earth Elements for White-Emitting Diodes
Chapter 7: Materials and Technologies in Construction
Fastness of Protective and Decorative Coatings Construction Products and Structures to the Action of Wind
The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant
Hyper-Pressed Composites from Recycling Products of Aerated Concrete Waste
Improving Water Resistance of Magnesium Binding Substances by the Introduction of Mineral Fillers
Composite Polymer Coatings for Repair of Concrete Linings of Channels
Innovational Construction Materials of LLP “EcostroyNII-PV” Production
Deformation and Strength Characteristics for the Calculation of Structures Based on Fiber-Reinforced Concrete Composites
Experimental Studies of the Physical and Mechanical Properties of Glued Building Materials Based on Modified Veneer
Glass-Crystalline Materials of a Cellular Structure, Formed by Vibration Foaming Technology
Modified Composite Fine-Grained Concrete
Polymer and Geocomposite Impervious Screen Reliability Assessment
Assessment of the Mechanism of Adhesive Destruction Coatings
Industrial Production Technology for Aluminium Paste
Chapter 8: Materials Properties Measurement and Testing Techniques
Research of the Wood’s Alloy Crystallization Process Using the Acoustic Method
Comparison of Non-Destructive Testing Techniques
The Spectrum of Crystallographic Misorientations of Intercrystalline Boundaries for BCC-HCP Phase Transformation in Additively Manufactured Ti-6Al-4V
Surface Texture Measurement with Profile Method Using Six-Axis Coordinate Measuring Machine
