Advances in Mechanical Engineering

Collection of selected, peer reviewed papers from the International Conference on Mechanical and Manufacturing Engineering (ICMME-2015), April 2-3, 2015, Kanchipuram, India.The 210 papers are grouped as follows:Chapter 1: Materials EngineeringChapter 2: Technologies of Materials Processing in Manufacturing EngineeringChapter 3: Fluids and Thermal EngineeringChapter 4: Engines and FuelsChapter 5: Research and Design of Industrial Equipments and MachinesChapter 6: Industrial Engineering
2. Auflage 2015
ISBN: 978-3-03835-664-6
Verlag: Trans Tech Publications

Buch, Englisch, 1249 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2100 g

Collection of selected, peer reviewed papers from the International Conference on Mechanical and Manufacturing Engineering (ICMME-2015), April 2-3, 2015, Kanchipuram, India.The 210 papers are grouped as follows:Chapter 1: Materials EngineeringChapter 2: Technologies of Materials Processing in Manufacturing EngineeringChapter 3: Fluids and Thermal EngineeringChapter 4: Engines and FuelsChapter 5: Research and Design of Industrial Equipments and MachinesChapter 6: Industrial Engineering

Autoren/Hrsg.

Rajmohan, T.

Arumugam, S.

Palanikumar, K.

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface & Committees
Chapter 1: Materials Engineering
A Short Review on Effect of Heat Treatment on Microstructure and Mechanical Properties of ADC12/SiC Metal Matrix Composite
A Review on Composite Materials with Ferrous, CNT and Powder Metallurgy
Characteristic Investigations on Loofah, Jute and Glass Fiber Reinforced Sandwich Polymeric Composites
Degradation of Hybrid Metal Matrix Composites Reinforced with Boron Carbide and Graphite Particles due to Pit Corrosion
Effect of Chemical Treatment on Mechanical Properties of Banana and Abaca Fiber Reinforced Composites
Effect of Chitosan Particle Addition on the Tensile and Flexural Strength of Coir Fiber Reinforced Polyester Composites
Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of As-Cast Al-B4C Composite
Effect of Nano TiO2/Clay on the Erosive Wear Behavior of Basalt-Epoxy Hybrid Composites at Elevated Temperatures
Evaluation of Lamina Properties and Fractographic Studies on Glass/Epoxy, Carbon/Epoxy and Kevlar/Epoxy Composites
Evaluation of Mechanical Properties of Acacia-Jute-Sisal-Glassfibrereinforced Composite
Fabrication and Mechanical Properties of Hybrid Natural Composite
Influence of MoS2 on Microstructure and Mechanical Behaviours of Al6061-Al2O3 Hybrid Composite
Influence of WC Particulate Reinforcement on the Mechanical Properties and Sliding Wear of Al6061 Alloys
Mathematical Model Development to Predict Wear Rate of Al6061/TiCp Composites under Lubricant
Mechanical Characterization of Low Cost Natural Fiber Particles Reinforced with Polymer Composites
Mechanical Properties of Hot Extruded Al (Mg)-MnO2 Composites
Mechanical Properties of Multi Axially Forged Hybrid Composite
Optimization of Electroless Ni-P-Nano-TiO2 Coating Parameters Using Taguchi Method for Corrosion Performance
Properties Investigations on Metallic Fiber Reinforced Sandwich Composites
Structural Response and Remaining Life of Damaged Composites
Study of Slurry Erosive Wear Behavior of Titania-30 Wt% Inconel-718 Plasma Sprayed Mild Steel Using Taguchi Technique
Study on Mechanical Properties of Aluminium Based Metal Matrix Composites by Hybrid Reinforcement
Synthesis of Metal Matrix Hybrid Composites and Evaluation of Mechanical and Tribological Properties
Tensile Behaviour of Nanoparticle Reinforced Epoxy-Polyurethane Composite Water Pipeline
Development of Corrosion Resistance Coating for AISI 410 Grade Steel
Characterization of Hydroxyapatite Coated SS316L for Biomedical Application
A Review on Defects in Carbon Nanotubes
A Study of Corrosive Behavior of Al6061 Plasma Sprayed with Titania and Inconel 718
Application of Sericin on Polyester Fabric
Determination of Mechanical Properties on Aluminium with 5% Copper Powder Metallurgy Route Compacts through Equal Channel Angular Pressing
Determination of Transformation Temperatures of SMAs by Varying the Force Using Dead Weight Method
Effect of Alkali Treatment on Tensile and Physicochemical Characterization of Cissus quadrangularis Fiber
Friction Force Behavior in Dry Sliding of Inconel 600 Alloy Using Taguchi Method and Regression Analysis
Material Response Changes due to Varied Loadings in Three Composites
Measurement of Hardness and Wear Properties of Al Alloy with Addition of Ni
Mechanical and Morphological Studies of Al6061-Gr-SiC Hybrid Metal Matrix Composites
Mechanical Properties and Corrosion Resistance of Friction Stir Welded Dissimilar Aluminum Alloys 2219 to 5083
Mechanical Properties of Al2O3 Reinforced Cast and Hot Extruded Al Based Metal Matrix Composites
Microstructure and Shape Memory Effect of Cu-Al-Be-Mn Quaternary Shape Memory Alloys
Optimization of Dry Sliding Wear Parameters of MWCNT Reinforced Poly-Ether-Ether-Ketone (PEEK) Composites
Structural Properties of Size Variation of Nanocrystallites
Study on Mechanical Properties of Al 7075 Hybrid Metal Matrix Composites
Synthesis and Characterisation of Multi Wall Carbon Nano Tubes (MWCNT) Reinforced Poly-Ether-Ether-Ketone (PEEK) Composites
Synthesis and Characterization of Cu-Al-Be-Mn Quaternary Shape Memory Alloys Prepared by Induction Melting Technique
Variation in Transformation Temperature and Shape Memory Effect in Cu-Al-Be Shape Memory Alloys with the Effect of Quaternary Elements
Wear Behaviour of Polyurethane Coated Aerospace Aluminium Alloy (7075)
Development and Analysis of Automotive Component Using Aluminium Alloy Nano Silicon Carbide Composite
Microwave Characterization of Ecosand for Electromagnetic Interference (EMI) Shielded Construction
Chapter 2: Technologies of Materials Processing in Manufacturing Engineering
Effect of Geometries of Die/Blank Holder and Punch Radii in Angular Deep-Drawing Dies on DP Steel Formability
A Review of Micro Hardness Measurement in Turning Operation
Analysis of Tool Wear while Milling Hybrid Metal Matrix Composites
Comparison of Optimum Cutting Parameters for AISI1042 in Turning Operation by Genetic Algorithm and Particle Swarm Optimization
Determining the Effect of Process Control Parameters on Tool - Chip Interface Temperature during Hard Turning of AISI D3 Tool Steel in Dry Condition
Effect of Cutting Parameters on Feed Force in Machining AISI 1018 Steel
Effect of Powder Concentration in EDM Process with Powder-Mixed Dielectric (PMD-EDM)
Electro Discharge Machining of WC/Ni Mixed Ceramic
Evaluation of Cutting Force and Surface Roughness in Turning of GFRP Using Coated Carbide Insert
Experimental Investigation and Analysis of Machining Parameters in Drilling of Fly Ash Filled Carbon Fibre Reinforced Composites
Experimental Investigation and Parameter Optimization of Micro Holes Machining on Ti-6Al-4V Alloy
Experimental Investigation of Soyabean Oil Based Cutting Fluid during Turning of Hardened AISI 4340 Steel with Minimal Fluid Application
Finite Element Analysis and Experimental Investigation of Drilling of Titanium Alloy (Ti6Al4V)
Improving Machinability in Conventional Turning of Ti-6Al-4V Using Work Piece Pre-Heating with Standard Cutting Tools
Multiple Performance Optimization in WEDM Parameters Using Desirability Analysis
Multiple Performance Optimization in WEDM Parameters Using Grey Relational Analysis
Optimization and Prediction of Cutting Force and Surface Roughness in End Milling Process of AISI 304 Stainless Steel
Optimization of Machining Parameters in Rotary EDM Process Using Copper Tungsten Electrode
Optimization of Machining Parameters of Valve Steel SUH03 (X45CrSiMo10-2) Using Gray Based Taguchi Method
Parameteric Optimization of Surface Roughness in End Milling of Aluminium Rock Dust Composite
Performance Analysis of Cylindrical Grinding Process Parameters Using Grey Relational Technique
Process Optimization of Electric Discharge Machining Using Response Surface Methodology
Review of Composite Machining and Related Optimization Techniques
Tool Wear Analysis in Turning Using Different Inserts and Different Lubrication Systems
Comparative Study of Constant Current and Pulsed Current GTA-Welded Al-B4C Stir Cast Composite
Comparison of ANN and Regression Modeling for Predicting the Responses of Friction Stir Welded Dissimilar AA5083-AA6063 Aluminum Alloys Joint
Dissimilar Welding of SS 409 and Mild Steel by Gas Tungsten Arc Welding (TIG) Method by ER 309 L Electrodes
Effect of Friction Stir Welding Process Parameters on Temperature Profile and Tensile Strength of Dissimilar Aluminum Alloys
Effect of Friction Stir Welding Process Parameters on the Mechanical Properties of AA 6061 Aluminum Alloy Using Taguchi Orthogonal Technique
Influence of Stick-Slip Effect on Gas Metal Arc Welding
Multi Response Optimization of Process Parameters on AA8011 Friction Stir Welded Aluminium Alloys Using RSM Based GRA Coupled with DEA
Multiple Performance Characteristics Optimization for AA8011 on Friction Stir Welding by RSM Based DEA
Optimization of GMAW Parameters to Improve the Mechanical Properties
Parameter Optimization for Friction Stir Welding AA1100
Prediction of Weld Strength of PC-TIG Welded Al-8% SiC Metal Matrix Composite – An Empirical Model (EM) Approach
Sensitivity Analysis for Process Parameters in Cladding of Austenitic Stainless Steel by Pulsed Metal Inert Gas Welding Process
Studies on Mechanical Properties, Fracture Morphology and Corrosion Behavior of Pulsed MIG Welded AZ31B Magnesium Alloy Sheets
Weld Properties of Low Carbon Steel Using Shielded Metal Arc Welding
A Review on Optimization of Friction and Wear Parameters (Al Alloy-B4C) Composite Using Taguchi Technique
An Approach on Fuzzy and Regression Modeling for Hard Milling Process
Analysis of Surface Roughness in Drilling of Fly Ash Filled Carbon Fibre Reinforced Composites
Studies on Parametric Optimization for Plasma Sprayed Fly Ash - Al2O3 Composite Coatings
An Innovation into Reuse of Risers for Energy Conservation in Metal Casting
Effect of Current and Deep Cryogenic Treated EDM Electrodes on Surface Roughness of AISI D3 Steel
Examination on Surface Roughness in EDM of Aluminium 6061 Reinforced with 5% SiC Using Design Experiments
Experimental and Numerical Study of Multi Hole Extrusion Process
Experimental Investigations of Material Behaviour in Forward Micro Extrusion
Investigation of Friction Using Non-Newtonian Lubricant Model in Hydrostatic Extrusion of Tungsten Alloy
Neural Network Based Breakout Prediction System in Continuous Casting Shop
Numerical Simulation of Al 6062 Alloy Deformation Behavior Using Equal Channel Angular Extrusion Process with Different Die Angles
Optimization of Process Parameters in Hot Forging of Medium Carbon Micro-Alloyed Steel
Performance Evaluation of Cryogenically Treated Tungsten Carbide Insert on Face Milling of Grey Cast Iron
Performance Test of Cryogenically Treated and Coated Tungsten Carbide Cutting Inserts
Process Optimization for Pore Defect in Casting – A Review
Simulation of Shock Wave Assisted Free and Shape Forming of Metallic Plates in a Shock Tube
Room Temperature Consolidation of Al and B4C Composite Powder by Equal Channel Angular Pressing
Determination of the Effect of Nickel Content on Hardness, Optimum Aging Temperature and Aging Time for Spinodal Bronze Alloys Cast in Metal Mould
Optimization of Process Parameters of Al-10% Cu Compacts through Powder Metallurgy
Optimizing the Coating Parameters for Coated Aluminium Alloy 2024 T351 by Using Factor Analysis Method
Parametric Optimization of Age Hardenable Aluminum Alloys Using TGRA Coupled with PCA
Preparation and Characterization of Hybrid Aluminum Matrix Composites Reinforced with MWCNT Using Powder Metallurgy Process
Effect of Nanoparticles in Reinforced Metal Matrix Composite on the Machinability Characteristics - A Review
Springback Studies on Different Grades of Steel Sheets
Swirling Fluidized Bed Polishing: A New Non-Conventional Method of Surface Modification
Chapter 3: Fluids and Thermal Engineering
A Very Efficient Class of HOC Schemes for the One-Dimensional Euler Equations of Gas Dynamics
Analysis of the Fluid Flow in 3D Symmetric Enlarged Channel
Analysis of Two Fluid Four-Channel Heat Exchanger Using Finite Element Method
Coupled Field Transient Thermo - Structural Analysis of Inhibited Sintering Process
Design and Development of V-Grooved Natural Convection Solar Air Heater for Odisha
Effect of Geometrical Parameters on Flow Mal-Distribution in a Wavy Microchannel
Effects of Heat Transfer, Magnetic Field and Space Porosity on Peristaltic Flow of a Newtonian Fluid in a Tapered Channel
Enhancement of Heat Transfer of Rectangular Saw Tooth Shaped Micro Channel Heat Sink with Water Nano Fluid/Aluminium Oxide
Enhancement of Productivity on Double Slope Single Basin Solar still by Flat Plate Collector and Sponge
Enhancement of Thermo-Oxidative Stability of Vegetable Oil Based Lubricant via Chemical Modification Techniques
Modeling and Simulation Assessment of Solar Photovoltaic/Thermal Hybrid Liquid System Using TRNSYS
Numerical Analysis of Natural Convective Heat Transfer over a Vertical Cylinder Using External Fins
Numerical Analysis on Hollow Cylindrical Pin Fins - Natural Convection
Numerical Analysis on the Dynamic Behaviour of Fluidized Bed Reactor
Numerical Investigation of Fluid Flow and Heat Transfer in Finned Micro-Channels with Nanofluids
Numerical Investigation of Forced Convection Heat Transfer from Offset Square Cylinders Placed in a Three Dimensional Confined Channel
Numerical Investigation on Visualizations of Confined Air Flow in a Slot Jet Inside a Rectangular Channel
Numerical Modeling of Solar Radiation Heat Transfer for a Truck Cabin
Numerical Investigation of Natural Convection in a Square Enclosure with a Baffle Mounted on Vertical Wall
Numerical Study on Heat Transfer Enhancement in a Circular Dimpled Surface by Using Inline and Staggered Pattern at Laminar Flow Regimes
Preheating Metal Scrap in Foundries Using Solar Thermal Energy
Thermal Conductivity of Fabrics
Transient Heat Transfer Solution Using Improved Lumped Model
Waste Heat Recovery from Castings and Scrap Preheating by Recovered Heat Using an Intermediate Heat Transfer Medium
Experimental Investigation of Heat Transfer in Coated Microchannels for MEMS Applications
Review on Thermal Conductivity of Fabrics
Thermo Mechanical Modeling of Selective Inhibition Sintered Thermoplastic Parts
Chapter 4: Engines and Fuels
An Experimental Study on Performance and Emissions of a CI Engine Fueled with Soybean Biodiesel with Antioxidant
Automobile Emission Reduction with Wet-Scrubber Technology
Biodiesel Production from Dairy Scum Oil by Using Heterogeneous Catalyst and its Performance Test on CI Engine
Comparison of Physicochemical Properties of Simarouba Glauca, Dairy Scum and Karanja Biodiesel of Various Blends with Diesel
Effect of Exhaust Gas Recirculation on Emissions of a Diesel Engine Fuelled with Castor Seed Biodiesel
Effect of Mahua Biodiesel Blends on the Combustion Characteristics of Direct Injection CI Engine at Various Compression Ratios
Experimental Studies on Diesel Engine with Piston Crown Modification Using an Optimum Alternative Fuel
Experimental Study on Mahua Bio-Diesel – An Alternative Source of Green Energy
Generation of Electricity from the Waste Heat of an IC Engine Using Thermo Electric Device
Modeling the Spray Characteristics of Biodiesel
Performance and Emissions Analysis of a Diesel Engine Using Various Bio-Fuels
Performance of SI Engine to Improve the Combustion Characteristics by Using Methanol Blended Petrol
Study on Rheological Characteristics and Molecular Interaction Properties of Annona Squamosa (Custard Apple) Seed Biodiesel
Thermodynamic Modeling of Single Cylinder Direct Injection Compression Ignition Engine in Simulink
Investigation and Analysis of Wear Reduction in Piston Rings through Coating
Automation in Spillcut Marking
A Conversion and Tribology Investigation on Used Ayurvedic Oil
Chapter 5: Research and Design of Industrial Equipments and Machines
Finite Element Analysis of Leaf Spring with Comparative Study Using Alternative Materials
Finite Element Analysis of Active Magnetic Bearing with Different Leg Shapes
Finite Element Model Development for Structural Integrity of Shafts with Circumferential and Arbitrary Oriented Cracks
Modal Analysis of Annular Plate with Crack and its Effect on Natural Frequency
Static and Dynamic Analysis of Motor Cycle Wheel Designs
A Comparison of Porous Structures on the Performance of a Slider Bearing with Surface Roughness in Couple Stress Fluid Film Lubrication
A Novel Walking-Aid for Paralytic Patients Caused due to Stroke
Automobile Gearbox Fault Diagnosis Using Naive Bayes and Decision Tree Algorithm
Brake Characteristics and Cooling Methods – A Review
Comparative Analysis of Chosen Tolerance Stackup Methods and Development of an Improved Tolerance Analysis Method
Controlling the Additives in Lubricating Oil to Minimize the Pitting Failure of Gear Teeth
Design and Analysis of Commercial Automotive Vehicle Brake Pedal
Design and Analysis of Electronic Controller Based Robot Arm
Design and Development of Drainage Inspection and Anti-Clogging Robot
Design and Fabrication of Rice Transplanter Adopting System of Rice Intensification (SRI) Technique
Design for Combining Oil Seal and Bush Pressing
Design of Two-Axis Automatic Sun Tracking System Assisted with Manual Control through LabVIEW
Determination of Constant Orientation Workspace of a Stewart Platform by Geometrical Method
Experimental Analysis of MR Fluid by Magneto-Rheological (MR) Damper
Experimental Studies on Air Foil Thrust Bearing Load Capabilities Considering the Effect of Foil Configuration
Health Monitoring of a Gear Box Using Vibration Signal Analysis
Hydrodynamic Study of Bubbles in a Bubble Column Reactor Part I – Image Processing
Hydrodynamic Study of Bubbles in a Bubble Column Reactor Part II – Numerical Study
Modelling and Workspace Analysis of Parallel-Serial Hybrid Manipulator
Multi Objective Design Optimization of Helical Gear Pair Using Adaptive Parameter Harmony Search Algorithm
Numerical Study about Combined Effect of Distributed Initial Imperfections and Dent on Ultimate Strength of Square Plates under Uni-Axial Compression
Study of Free Vibration Characteristics of Carbon Epoxy Based Composite Beams
Workspace Analysis and Optimization of 3-RRR Planar Parallel Manipulator
Computer Aided Stress and Deflection Analysis of Inspection Robot at Different Postures
A Study on the Classification Ability of Decision Tree and Support Vector Machine in Gearbox Fault Detection
Numerical Study on the Effect of Free Rotating Vaneless Diffuser of Exit Diameter to Inlet Diameter Ratio 1.3 with Speed Ratio 0.50 on Centrifugal Compressor Performance
Design and Performance Prediction of Low Cost Vertical Axis Wind Turbine
Analysis of Fluid Structure Interaction in High Pressure Elbow Pipe Connections
Experimental Investigation of Composite Desiccant Wheel Dehumidifier
Geometrically Nonlinear Analysis of Smart Sandwich Plates
Improving the Mechanical Properties of the Propeller Shaft by Using Composite Materials
Investigation of Engineering Properties of Paddy Grown in the Coastal Climate of Eastern India
Acoustic Signature Based Weld Quality Monitoring for SMAW Process Using Data Mining Algorithms
Cyclic Behaviour of High Performance Concrete Beams Strengthened with GFRP Sheets
Marked Graph of Four Work Station Automated Manufacturing System and Sign Incidence Matrix
Geotechnical Investigation, Field Load Test and Analysis of Full-Scale Bored Pile
Chapter 6: Industrial Engineering
Analytic Hierarchy Process to Select Environmentally Conscious Suppliers for Sustainable Supply Chain Management: A Case Study in a Public Sector Transport Corporation
Application of Lean Six Sigma Tools for Reduction of Defects in Pump Manufacturing
Employee Involvement and Management Commitment in Lean Implementation
Factors Affecting Leadtime in Spinning Mills
GEN-PRODIS Approach for Determining Total Cost in Disassembly Sequencing Problem
Implementation of Lean Tools-Value Stream Mapping & SMED for Lead Time Reduction in Industrial Valve Manufacturing Company
Knowledge Gap and its Impact on Product and Process Quality
Minimizing Makespan in Job Shop Scheduling Problem Using Genetic Algorithm
Multi-Objective Optimization Problems in Taguchi Parameter Design – A Literature Review
Multi-Agent Based Disassembly Sequencing and Planning for End-of-Life Products
Reduction of Rejections in Main Shaft Machining Operations
Solving a Reverse Supply Chain TSP by Genetic Algorithm
Supply Chain Performance Measurement: A Review and Reflection

Über Autor(innen)

Eds. T. Rajmohan, S. Arumugam and K. Palanikumar