Buch, Englisch, 942 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1860 g
Buch, Englisch, 942 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1860 g
ISBN: 978-3-0357-1432-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Chapter 1: Properties and Behaviour of Structural and Functional Materials
Application of Rietveld Refinement and Williamson Hall Analysis in Ultra-Low Carbon to High Carbon Steels
Properties of Three Phase Magneto-Electro-Thermo-Elastic Composites
Anodic Polarization Behavior of Cold-Worked Austenitic Stainless Steel: A Newer Approach
Correlating Tensile Properties with Microstructures of Various Regions in Gas Tungsten Arc Welded AA2014 Alloy
A Study on Influence of Underwater Friction Stir Welding on Microstructural, Mechanical Properties and Formability in 5052-O Aluminium Alloys
Studies on Susceptibility of Alloy 617 to Solidification Cracking
Influence of Different In-Process and Building Materials with Varying Hardness on Impact Sensitivity of the Matchhead Composition
Experimental Study of High Velocity Oxygen Fuel Sprayed Cr3C2- Ni-Cr-B-Si Coatings on Inconel 718 Using Design of Experiments
Influence of Temperature on Impact Sensitivity of Matchhead Composition while in Contact with Different Process Materials
Thermo-Mechanical Treated High Strength AA-7xxx Aluminium Alloy by Cold and Cryo-Rolling Study their Mechanical Properties Corrosion and Microstructure Correlation
Synthesis of Al5083 Alloy by High Energy Ball Mill and Densification through Equal Channel Angular Pressing (ECAP)
Tribological and Morphological Evaluation of Ni-P and Ni-P/D Coatings
Fracture Behaviour of Fibre Reinforced Rubcrete
High-Temperature Wear Behavior of the ZE41 Mg Alloy
Microstructural and Corrosion Studies by Immersion in 3.5% NaCl Solution on Aged Mg-9Al-1Zn-XCa Alloy
High Entropy Based Composites - An Overview
X-Ray Diffraction and Microstructure Analysis of EN47 Spring Steel at Various Soaking Period of Time
Evaluation of Wear Rate of Aluminium Hybrid Composites Fabricated through Stir Casting Technique
Bending Analysis of Piezoelectric Functionally Graded Material Plates Using HSDT
Influence of Sic and Al2O3 Particulate Reinforcement on the Mechanical Properties of ZA27 Metal Matrix Composites
A Comparative Study of Wave Excitation in Plates Using Piezoelectric Transducers Operating at Different Modes
Investigation on Effect of Fibre Volume and Fiber Orientation on Erosive Wear Behavior of Carbon Fiber Reinforced Epoxy (CFRP) Composites
Dry Sliding Wear of Unidirectional Short Castor Oil Fiber Reinforced Epoxy Composite
Thermal and Impact Sensitivity of Pyrotechnic Compositions Containing the Potassium Perchlorate, Aluminium and Graphite
Mechanical Characterization of the Natural Fiber Reinforced Polystyrene Composite
Comparison of Erosion Wear of Bidirectional and Multidirectional Oriented Glass Fibre Epoxy Composites
Tribological Analysis by Concentration Effect of Boron Carbide and Graphite on the Aluminum Composites
Synthesis, Structural Analysis of Cadmium Sulphide Nanocrystallites
Study of Corrosion Behavior of Carbon Fiber Reinforced Plastics (CFRPs)
Investigation of Energy Absorption Behaviour of Square Aluminium Tubes with Cutouts under Axial Compression
Development of Models for Predicting Strut Efficiency Factors for Conventional and Steel Fibre Reinforced Concrete Deep Beams
A Review of Contemporary Fatigue Analysis and Biomaterials Studies in Endodontics
Effect of Hydrofluorocarbons and Hydrofluoroolefins in a Household Refrigerator as a Substitute for R134a
Characterization of Microstructure and Mechanical Properties of AA2219-O and T6 Friction Stir Welds
Microstructure Characterization of Superalloy 718 during Dissimilar Rotary Friction Welding
An Overview of Quasicrystal Reinforced Magnesium Metal Matrix Composites
Effect of Geosynthetic Reinforcement on Strength Behaviour of Weak Subgrade Soil
Responses of Aluminium Alloy Pistons under Mechanical and Thermal Loads
Cadmium Sulphide Nanocrystallites for Optoelectronic Devices
Evaluate Mechanical Behavior of Alumina Coated Aluminum Alloy Using Slow Strain Rates Test in 3.5% of NaCl Solution
Torsional Behavior of Irregular RC Building under Static and Dynamic Loading
Effect on the Mechanical Properties of Aluminum-Based Hybrid Metal Matrix Composite Using Stir Casting Method
Fabrication of Solution Combustion Based Transparent Semiconducting Titanium and Zinc Co-Doped Indium Oxide (ITiZO) Films
Tensile and Hardness Properties of Sheep Wool Fiber Reinforced Polyester Composite
Enhanced Tensile and Wear Properties of CFRP Composites Manufactured Using Vacuum Infusion Process
Smart Materials for Sustainable and Smart Infrastructure
Reduction of AWJ Induced Delaminations by Impregnated Nanoclay GFRP Composites
Flexural Behaviour of GGBS-Dolomite Geopolymer Concrete Beams under Cyclic Loading
Evaluation of Microstructure and Mechanical Properties of Multi Axial Forged LM2 Aluminum Alloy
Determination of Crack Pattern in Concrete Structures Using Applied Element Method
Effect of Type and Concentration of Aqueous Solutions on Corrosion Behaviour of Plasma Electrolytic Oxide Films on ZM21 Mg Alloy
A Three Dimensional Fracture Analysis of an Edge Crack in FGM Using XFEM
Comparative Evaluation of Quasi-Static Indentation Behaviour of Glass Fiber Reinforced (GFRP) and Carbon Fiber Reinforced (CFRP) Laminates
Shear Strength of BC-Soil Admixed with Lime and Bio-Enzyme
Tribological Properties of Basalt Fibers - A Review
Performance Comparison of a Low GWP Refrigerants as Alternatives to R134a in a Refrigerator with and without Liquid-Suction Heat Exchanger
Critical Review of Design Procedures for Reinforced Concrete Slabs as per IRC 112-2011
Optical Investigations of In2Se2.7Sb0.3 Thin Films Prepared by Thermal Evaporation Technique
Analysis of the Tribological Properties of Commercial Pure (CP) Aluminum Developed by Chip Consolidation through Equal Channel Angular Pressing (ECAP)
Polypyrrole/Alumina-Iron Oxide Nanocomposite for Removal of Copper Ions from Aqueous Solutions
Development of Al7075 Reinforced with Multiwalled Carbon Nanotubes for Strength Evaluation and FE Static Analysis of Idealized Brake Rotors
Synthesis and Evaluation of Biocompatibility of Cu-Al-Mn Shape Memory Alloy
Influence of Neodymium on Microstructure and Mechanical Properties of Mg-9Li-3Al Alloy
Effect of Multiaxial Cryoforging on Wear Properties of Cu-1.5%Ti Alloy
Determination on the Effect of Al2O3/B4C on the Mechanical Behaviour of Al-6.6Si-0.5Mg Alloy Cast in Permanent Mould
Effect of Calcium Phosphate on Tensile and Rheological Properties of Polylactic Acid (PLA)
Investigation on Electromechanical Properties of Solid Silicone Rubber Composites with Conductive Carbon Filler
Development of Bronze Metal Matrix Composite for Automobile and Marine Applications
Effect of Titanium Dioxide (Tio2) Nano-Fluid on Performance and Emission Features of a Diesel Engine Operated on Aphanizomenon Flos Biodiesel-Diesel Blend
Effect of Soaking Time on Evolution of Microstructure and Hardness during Annealing of EN-47 Spring Steel
Characterization of MnS Thin Films Deposited by Chemical Bath Deposition
Fullerene (PCBM) Modulated MEH-PPV Photoactive Material for Plastic Solar Cells
Thermal Performance of Acrylonitrile Butadiene Styrene (ABS) Copolymer Blended with PTFE Particle/Polymer Composite
Combustion Characteristics of Single Cylinder Diesel Engine Fueled with Blends of Thumba Biodiesel as an Alternative Fuel
Experimental Investigation of Proton Exchange Membrane (PEM) Fuel Cell Using Different Serpentine Flow Channels
Selection of High Entropy Alloy for Solid Solution Using Multi-Criteria Decision Making Tool
Mechanical and Microstructure Study of the Self Healing Bacterial Concrete
Numerical Modelling of Nanocomposites Using GA and FD Techniques
An Investigation on the Suitability of Al-Mg Binary Hypo-Eutectic and Eutectic Aluminium Alloys as a Metal Matrix for Polymer Reinforced Composites and Lightweight Applications
Improvement in Mechanical and Metallurgical Properties of Friction Stir Welded 6061-T6 Aluminum Alloys through Cryogenic Treatment
Microstructure Characterization in Dissimilar TIG Welds of Inconel Alloy 718 and High Strength Tensile Steel
Effect of Fiber Orientation on the Flexural Properties of Glass Fiber Reinforced, Epoxy- Matrix Composite
Finite Element Analysis and Mechanical Behavior of 316L Stainless Steel Processed by Room Temperature Rolling
Investigating the Effect of Friction Stir Welding on Microstructure and Corrosion Behaviour of Al-Zn-Mg Alloy
Computational Fluid Dynamic Analysis on PEM Fuel Cell Performance Using Bio Channel
Influence of Lung Channel Design Bipolar Plate on Performance of PEMFC Using Computational Fluid Dynamic Analysis
Chapter 2: Technologies of Materials Synthesis and Processing
Optimization of Process Parameters Using Surface Response Methodology for Laser Welding of Titanium Alloy
Forming of AA2xxx and AA7xxx Sheet Alloys and their Studies on Microstructural and Mechanical Properties of Cold and Cryo Rolled Aluminum Alloys
Prediction and Optimization of Deformations in Coupling Mechanism Based Laser Forming of Sheet Metals
Parameter Optimization for Laser Welding of High Strength Dissimilar Materials
Effect of Back Pressure on the Consolidation Behaviour of Titanium Sponge Particles Processed by ECAP
Experimental Analysis of SA213 Tube to SA387 Tube Plate Welding by Using Close Fit Technique in Absence of Supporting Plate
Mechanical and Tribological Properties of A7050 Hybrid Composite Reinforced with Nano Al2O3/Micro ZrO2 Particles by Stir Casting Method
Bead Modelling and Deposition Path Planning in Wire Arc Additive Manufacturing of Three Dimensional Parts
Optimization of Process Parameters for Improved Corrosion Resistance and Microstructural Exploration in Friction Stir Welding of AA2024 - AA6061
Challenges and Opportunities in ECH of Gears
Effect of Mechanical Properties and Corrosion Behaviour of Martensitic Stainless Steel 410 1.6mm Butt Welded by Plasma Arc Welding
Surface Roughness Prediction Modelling for WEDM of AA6063 Using Support Vector Machine Technique
Effect of Process Parameters and Heat Input on Weld Bead Geometry of Laser Welded Titanium Ti-6Al-4V Alloy
Effect of Microstructure and Mechanical Properties of Austenitic Stainless Steel 1.6mm Butt Welded by Plasma Arc Welding
Parametric Optimization of Dissimilar TIG Welding of AISI 304L and 430 Steel Using Taguchi Analysis
Optimization of Cutting Conditions for Surface Roughness in VMC 5-Axis
Performance Evaluation of Yield Function and Comparison of Yielding Characteristics of SS 304 in Annealed and Unannealed Conditions
Analysis of Dimensional Accuracy (Over Cut) and Surface Quality (Roughness) in Electrical Discharge Machining of Inconel-718 Alloy
Some Preliminary Experimental Investigations on Inconel-718 Alloy with Rotary Tool-Electrode Assisted EDM
Effects of Wire-EDM Machining Variables on Surface Roughness of D2 Steel Material
Effect of Milling Time on Consolidation of Al5083 Nanocomposite by Equal Channel Angular Pressing
Investigation of a Hollow Shaft to Determine the Maximum Angular Velocity Regarding the FGM Properties
Analysis and Optimization of Wire EDM Process of Titanium by Using GRA Methodology
Cold Metal Transfer (CMT) Welding of Dissimilar Materials: An Overview
Optimization of Friction Surfacing Process Parameters on Low Carbon Steel Using Taguchi Approach
Remediation Technologies - A Comparative Study
Formability Analyses on Single Point Incremental Sheet Forming Process on Aluminum 1050
Metal Joining Technique of SA 213 Tube and SA 387 Tube Plate Grade Materials Using Backing Block by Clearance Fit Condition
Experimental Investigation of Sunflower Oil as Dielectric Fluid in Die Sinking Electric Discharge Machining Process
Evaluation of Microstructure and Mechanical Properties for Friction Stir Welding of Aluminium HE-30 Plates
Processing of Nickel-Copper Coated Carbon Fibre Rods Reinforced Al6082/4% Al2O3/2%Gr Matrix Composites
Investigation on Effects of Cutting and Jet Parameters in Turning of AISI 4140 Hardened Alloy Steel
Electrical Discharge Machining Characteristics of ECAP Copper Electrode
Parametric Studies on TIG Welding of 316L Stainless Steel by RSM and TLBO
Modelling of Tool Wear for Ti64 Turning Operation
Optimization of Process Parameters in the Turning Operation of Inconel 625
Investigation of the Impact of Cutting Parameters on Surface Integrity in the End Milling of Inconel 625
TIG Arc Welding - Brazing of Dissimilar Metals - An Overview
Optimization of Injection Moulding Process Parameters for Manufacturing Plastic Components (PBT) Using Taguchi Method (TM)
Multi-Objective Optimization of Machining Process Parameters in Wire-Cut Electric Discharge Machining of Inconel X750 Alloy by Combinatorial Approach
Mechanical and Abrasive Wear Behaviour of Waste Silk Fiber Reinforced Epoxy Biocomposites Using Taguchi Method
Effect of Grain Refiners and/or Modifiers on the Microstructure and Mechanical Properties of Al-Si Alloy (LM6)
Application of Machine Learning Techniques for Multi Objective Optimization of Response Variables in Wire Cut Electro Discharge Machining Operation
Effect of Various Welding Parameters on the Mechanical Behaviour of 316L Stainless Steel-Galvanized Steel Weld
Elucidation on the Microstructural and Mechanical Properties of Tailored VAL12 Hybrid Composites with ZrO2 Dispersoids Fabricated by Squeeze Casting Technique
Finite Element Modeling of Back-to-Back Built-Up CFS Un-Lipped Channels under Axial Compression
Optimization of Welding Process Parameters in Novel Friction Stir Welding of Polyamide 66 Joints
Effect of Welding Speed on the Microstructure and Corrosion Properties of Weld and Heat Affected Zones in GTA Welded AA2014 Alloy
A Review on Fabrication of Surface Composites on Magnesium Alloys by Friction Stir Processing
Investigation on Machining of Hybrid Metal Matrix Composite
Scale down Approach to Solve Distortion Problem in Case of Wind Turbine Tower Fabrication
Thermal Analysis of Dissimilar Materials Diffusion Bonding Using Finite Element Method
Optimization of Friction Stir Processing Parameters for the Development of Cu-W Surface Composite
Study on Effect of Tool Overhang on Machining Characteristics of Al 7075-T6 in Orthogonal Turning Process
Analysis of Product Quality through Mechanical Properties and Determining Optimal Process Parameters of Untreated and Heat Treated Aisi 1050 Alloy during Turning Operation
Fabrication of Light Weight Metal Matrix Nanocomposites Using Ultrasonic Cavitation Process: A State of Review
Recent Studies on the Fabrication of Magnesium Based Metal Matrix Nano-Composites by Using Ultrasonic Stir Casting Technique - A Review
The Influence of Gas Tungsten Arc Welding Parameters on Mechanical and Microstructure Properties of the TC4 Titanium Alloy
Numerical Analysis of Constrained Groove Pressing and Mechanical Behaviour of Processed 316L Stainless Steel
