Buch, Englisch, 684 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1290 g
The 17th International Conference on Fracture and Damage Mechanics (FDM 2018)
Buch, Englisch, 684 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1290 g
ISBN: 978-3-0357-1350-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Bending Fatigue Behavior of 7075-Aluminum Alloy
Effect of Water Temperature on Interfacial Shear Strength of Resin Particles Added CFRTP
Investigation on Damage and Failure of Vinyl Composite Plate under Tensile Load
Influence of Thickness on Tensile Property of Copper Foil
Trial Fabrication of Carbon Fiber-Reinforced Thermoplastic Honeycomb Sandwich Materials
Disappearance of Martensitic Strengthened-Micro-Texture in Modified 9Cr-1Mo Steel Caused by Stress-Induced Acceleration of Atomic Diffusion at Elevated Temperatures
Cyclic Loading Behaviour of Double Strap Bonded Joints with CFRP and Aluminium
A Simple Analytical Approach for Creep Analysis of EB-FRP Systems
Stress Intensity Factors for Cracks Emanating from a Notch under Shear-Mode Loading
Evaluation of the Apparent Interfacial Shear Strength of Nanocellulose/PVA Composites
Modelling Cracked Cross-Ply Laminates with Delamination Buckling
Characterization of Adhesion Properties by Delamination of Ceramic-Metal Interfaces in Four Point Bending
Determination of Mixed-Mode Cohesive Zone Failure Parameters Using Digital Volume Correlation and the Inverse Finite Element Method
Failure Analysis of the Restraining System of the Directional Rudder of an MD80 Aircraft
A Quasi-Static Delamination Model with Rate-Dependent Interface Damage Exposed to Cyclic Loading
Flexoelectric Effect for Cracks in Piezoelectric Solids
SEM Study of the Influence of Microstructure on Low Cycle Fatigue Crack Growth in Martensitic Steel I
Thermo-Mechanical Behaviour of a Composite Stiffened Panel Undergoing the Tail-Pipe Fire Event
A Numerical Study on Multi-Terrain Impacts of an Aeronautical Fuselage Section
Application of Singular Integral Equation to a Crack Moving near a Hole in a Two-Dimensional Infinite Plate
Interrelationship between Creep Deformation and Damage for Advanced Creep-Resistant Steels
Investigation on Strength and Damage Test of Composite Blade for Vertical Axis Wind Turbine
Transfer Matrix Analysis for Curved Beam Structure
Comprehensive Numerical Simulation of Stress and Damage Fields under Thermo-Mechanical Loading for TBC-Coated Ni-Based Superalloy
Mechanical Response and Damage of Woven Composite Materials Reinforced with Fique
Damage Assessment of Spinal Bones due to Prostate Cancer
Damage in Fibreglass Composite Laminates Used for Pipes
Evaluation of Tensile Properties and Damage of Continuous Fibre Reinforced 3D-Printed Parts
Cohesive Zone Modeling of Stable Crack Propagation in Highly Ductile Steel
Creep Damage Mechanisms in Cast Cobalt Superalloys for Applications in Glass Industry
Mixed-Mode Stress Intensity Factors in a Homogeneous Orthotropic Medium Loaded by a Frictional Sliding Rigid Flat Stamp
Theoretical Model to Adhesion Failure in Granular Materials
Finite Element Analysis for Palm Oil Bunches Press Shaft Fractured in Service
Investigation of Integral Composite T-Joints under Mixed Mode Loading
A Nonaffine Molecular Chain Network Model for Elastomeric Gel
Modeling, Simulation, and Experimentation of Fatigue Behavior in Amorphous Solids
Design Methodology for Gear Design of a Formula One Racing Car: A Modelling Procedure Based on Finite Element
Research on Strength Design of Channel Clips for Suspended Ceilings
An Influence of Tightening Torque Stored in Tightening Process on Fatigue Strength of Aluminum Bolts
Structural Health Monitoring of Scarfed Repaired Composite Panels Using Inject-Printed Patterns
Application of Embedded Element in the Short Fiber Reinforced Composite
The Role of Post Service Heat Treatment on the Contributions of Creep Deformation and Fracture to Service Life of AISI Type 316H Steel Components
A NURBS-BEM Application in Continuum Damage Mechanics
Effect of Stress Ratio on Stress Intensity Factor of Type I Crack in A7N01 Aluminum Alloy
The Effect of Explosion in a Tunnel Tube on its Damage
Computational Analysis of Crack-Like Defects Influence on the Open Cell Ceramic Foam Tensile Strength
Strength Development Characteristic of Cementless Mortar for Repair of Concrete
Study on Nondestructive Inspection Method of Single-Lap Adhesive Joints to Eliminate the Influence of Inspector's Behavioral Characteristics
Effect of Water Immersion on Interfacial Strength of a Metal/Epoxy Joint
Stressed Cylinder Dispersion Curves Based on Effective Elastic Constants and SAFE Method
Glass Bottle Fracture Behavior by Underwater Shock-Wave - Effect of Micro-Bubble on the Fracture Behavior -
Thermo-Mechanical Analysis of the Exhaust Manifold of a High Performance Turbocharged Engine
Mechanical Properties and Fatigue Resistance of 3D Printed Inconel 718 in Comparison with Conventional Manufacture
Experimental Verification of Dents Effect on the Structural Integrity of Pipeline DN 300
Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions
Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation
Effect of High Temperature Environment on the Tensile Strength of Carbon Fiber/Highly Heat Resistant Polyamide Resin
Guided-Waves in a Low Velocity Impacted Composite Winglet
Effect of the Type of Silica Fume and Filler on Mechanical Properties of Ultra High Performance Concrete
Convergence of the BEM Solution Applied to the CCFFM for LEBIM
Optimization of Dynamic Cornering Fatigue Test Process of Aluminum Alloy Wheels
Effect of Press Condition on the Mechanical Properties of GFRTP Molded by the Melted Thermoplastic-Resin Transfer Molding
Mixed-Mode Stress Intensity Factors for Tubes under Pure Torsion Loading
Simulation of Inner Rim Compression Test of Aluminum Alloy Wheels
Analysis of the Analytical and Numerical Studies for Crack Widening in Lamellar Metal-Ceramic Composites
A Model for High-Cycle Fatigue in Polycrystals
A Computational Study on Crack Propagation in Bio-Inspired Lattices
Cutting of a Thick Glass Plate by Using Hot Wire
Effect of CNT Grafting on Carbon Fibers on Impact Properties of CFRTP Laminate
Optimization of Design Parameters of Fracture Resistant Piezoelectric Vibration Energy Harvester
Bending Properties of CFRTP Laminate Using CNT Grafted Carbon Fiber
How Material Properties Affect the Thermal Distortion of a Mold for Continuous Casting of Steel
Influence of the Deformation Rate on the Delamination of Laminated Composite Materials
Key Aspects in 3D Fatigue Crack Closure Numerical Modelling
Prediction of the Critical Energy Release Rate of Nanostructured Solids Using the Laplacian Version of the Strain Gradient Elasticity Theory
Stress Sensitivity of the T(0,1) Mode Velocity for Cylindrical Waveguides
Measuring Wear in a Fretting Test with a Confocal Microscope
Characterization and Modelling of Multiple Intralaminar Cracking Initiation under Tensile Quasi-Static and Fatigue Loading
Numerical Analysis of the Pivot Node in Fracture Problems
A Microstructural Model for Micro-Cracking in Piezoceramics
Robust and Reliability-Based Design Optimization of a Composite Floor Beam
Cold-Drawn Pearlitic Steels as Hierarchically Structured Materials: An Approach to Johann Sebastian Bach
Meshfree Continuum Damage Model for Twill Composites
Prediction of Fatigue Life of Structural Steel S355-J2G3 with SK Critical Plane Model
Investigation of the Biaxial Behaviour of 316 Stainless Steel Based on Critical Plane Method
An Innovative Secondary Bonding of Sensors to Composite Structures for SHM Application
On the Thickness Dependence of ILTS in Curved Composite Laminates
An Effective Impact Detection Method for Composite Curved Panel
Effectiveness of RAPID and SSM Algorithms on Composite Scarf Repair
Development of Gun Bullet Protect Board - Gun Bullet Experiment and Analysis -
Strain Injection Techniques for Modeling 3D Crack Propagation
Shortening the Long Creep Strength Evaluation Period with the Assistant of Stress Relaxation Behavior
An Approach to Predict Creep Strain and Rupture Life of Heat Resistant Steels Based on ZC Parameter
Elastic Properties and Failure Behavior of Tiled Laminate Composites
Numerical Analysis of the Failure Behavior of a C50/60 Brazilian Disc Test Specimen with a Central Notch
A Thermodynamically Consistent CZM for Low-Cycle Fatigue Analysis
Accurate SIF Analysis of a Partially Cylindrical Side Crack Opened by Far-Field Tension
Fatigue Assessment of a Slender Footbridge Based on an Updated Finite Element Model
A FEM Simulation of the Mechanical Interaction between Asphalt Mixture and Geogrid at Micro-Scale
Comparison of Fracture Tests Numerical Models Created with Real Material Properties
Crack Surface Frictional Contact Modelling in Piezoelectric Materials
Statistical Inference of the Equivalent Initial Flaw Size Distribution Using the Boundary Element Method under Multiple Sources of Uncertainty
Corrosivity Evaluation of Steel Members near the Air-Liquid Interface Using a Ground Corrosion Sensor
A Boundary Element Model for Structural Health Monitoring Based on the S0 Lamb Wave Mode
A Phase Field Staggered Algorithm for Fracture Modeling in Heterogeneous Microstructure
Guided Wave Based Damage Detection in a Composite Plate with an Opening
Numerical Study of the Progression of the Micromechanical Debonding Damage in Composites
Modelling the Mechanical Response of Adobe Components under Uniaxial Loading
