2-vols. Set
Buch, Englisch, 1600 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3100 g
ISBN: 978-0-87849-288-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Hydraulik, Pneumatik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Elastizität, Plastizität, Rheologie
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Festigkeitslehre, Belastbarkeit
Weitere Infos & Material
Conference Committees, AdvisoryEditorialBoard
Sponsors
Foreword
Chapter 1: Biomaterials and Integration of Materials into Biological Systems
Biomimetic and Smart Polymeric Surfaces for Biomedical and Biotechnological Applications
Chlorapatite Conversion to Hydroxyapatite under High Temperature Hydrothermal Conditions
Electrochemical Formation and Corrosion Properties of Porous TiOx Biomaterials
Preparation of Chitosan Scaffolds for Tissue Engineering Using Supercritical Fluid Technology
Bioactivity and Viscoelastic Characterization in Physiological Simulated Conditions of Chitosan/Bioglass® Composite Membranes
New Composite Membranes Containing Bioactive Glass-Ceramic Nanoparticles and Chitosan for Biomedical Applications
Simulating Human Physiological Response with a Thermal Manikin Testing Different Non Active Medical Devices
Improvement of the Mechanical Properties of Glasses Based on the 3CaO.P2O5-SiO2-MgO System after Heat-Treatment
Mechanical Behaviour of ZrO2-Bioglass Dental Ceramics under Cyclic Fatigue Loading
Ordered Mesoporous Silica Materials for Protein Adsorption
Analysis of Fibrous Composition for Hygienic Purpose – Recommendations for Application on Feminine Underwear
Effect of Heat Treatments on Mechanical Properties and Fatigue Resistance of Ti-35Nb Alloy Used as Biomaterial
Tri-Block Copolymers Obtained by RAFT Polymerization: A Promising Material for Drug-Delivery Systems
Study of Adhesion Relationship of Hydroxyapatite-Titania Coating Obtained by HVOF
Chapter 2: Ceramics
Impedance Spectroscopy Evolution upon Sintering of Alumina Bodies Containing Al-Rich Anodizing Sludge
Influence of Yttrium Oxide in the Volatilization of the Silica Contained in Zircon
Cordierite Foam Supports Washcoated with Zeolite-Based Catalysts for Volatile Organic Compounds (VOCs) Combustion
Lead Free CaTiO3-Based Ceramics: Sintering, Phase Transitions and Dielectric Properties
Kinetics of Defect-Induced Cation Redistribution in (CoxMg1-x)2SiO4 Olivines
Influence of Surface Area on the Flowability Behaviour of Self-Flow Refractory Castables
Fine-Grained Si3N4-Containing Ceramics from Nanopowders
Structural Characterisation and Mechanical Stability of Titanium Substituted Mesoporous Materials
Corrosion Resistance of Alumina-Sialon Refractories for Application in Aluminium Industry
The Effect of Synthesis Parameters on the Structure and Properties of Metakaolin Based Geopolymers
Synthesis and Characterisation of Slag Based Geopolymers
Thermal Conductivity of Porous Alumina-Zirconia Prepared by Foam Technique for Applications in Cooling Systems of Artificial Satellites
Chapter 3: Composite Materials
Machinability of Al-4%wt Mg-Al2O3-Graphite Composites Produced by Compo-Casting Technique
Nanocrystallite Characterization of the MMC 316L-0.3%wtY2O3-3%wtTaC by Rietveld Refinement Method
The Properties and Structure of Infiltrated High Speed Steel-Tungsten Carbide-Copper Composites
The Effect of Ti Addition on the Properties of Al-B4C Interface: A Microstructural Study
Fabrication and Characterization of Halogen-Free Flame Retardant Polyolefin Foams
Drilling of Carbon Fibre Reinforced Laminates – A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and Delamination
Glass/Polyvinyl Chloride Composites
Production of Thermoplastic Towpregs
Ecodesign Applied to Components Based on Sugarcane Fibers Composites
Strength Prediction of Adhesively-Bonded Scarf Repairs in Composite Structures under Bending
Mechanical Behaviour Analysis of Polymer Mortars Reinforced with Jute and Piassava Natural Fibres under Alkaline Environments
Mechanical Behaviour of Sandwich Beams Manufactured with Glass or Jute Fiber in Facings and Cork Agglomerates as Core
Thermo-Mechanical Treatment to Improve Properties of Sisal Fibres for Composites
Exploring the Use of Cork Based Composites for Aerospace Applications
Suitability of Corkrubber Gaskets in Gasoline-Ethanol Blends
Chemical and Thermal Characterization of Road Bitumen Ageing
Viscoelastic Properties Assessment of Syntactic Foams by Dynamic Mechanical Analysis
Shock Resistance and Compression Analysis of Concrete in Expanded Polystyrene Formworks (EPSFWs)
Chapter 4: Electronic, Magnetic and Photonic Materials
Combinatorial Study of New Materials Sensing High Temperature
Ytterbium/Yttrium Oxide Superlattices Sensing Strain under High Temperature
Investigations on Humidity Sensing Properties of Thick Films of the TiO2:WO3 System
Humidity ITO Thick Film Sensing Behaviour Investigated by Impedance Spectroscopy
Computational Study of the Influence of Polymer/Polymer Interface Formation on Bilayer-LED Functioning
Theoretical Study of the Influence of Chemical Defects on the Molecular Properties of Semiconducting Polymers
Influence of Oxygen Stoichiometry and Cation Ordering on Magnetoresistive Properties of Sr2FeMoO6±d
Synthesis and Optical Characterization of Pr3+ Doped UV Emitting Luminescent Ceramics
Technology of PLZT Material Used for Photovoltaic Driven Piezoelectric Transformers
Properties of Co Substituted Bismuth Ferrite System by Rapid Liquid Phase Sintering
Effect of the Nanostructure Control on the Novel Optical Properties of Silica Photonic Glass Synthesized by VAD Method
Electrical and Mechanical Examination of PLZT/PZT Graded Structure for Photovoltaic Driven Piezoelectric Transformers
Highly Luminescent CdTe Nanocrystals Synthesized in Aqueous Solution and Self-Assembled on Polyelectrolyte Multilayers
Synthesis and Characterization of Novel Donor-Acceptor Oligothiophenes as Efficient and Thermally Stable Second-Order Nonlinear Optical Chromophores
Synthesis and Characterization of New Push-Pull Anthraquinones Bearing an Arylthienyl-Imidazo Conjugation Pathway as Efficient Nonlinear Optical Chromophores
Piezoelectric PZT Thin Films on Flexible Copper-Coated Polymer Films
Piezoelectric and Ultrasonic Studies of Mixed AgxCu1-xInP2(S,Se)6 Layered Crystals
Structural and Magnetic Properties of Sm(CobalFe0.1Ni0.12Zr0.04B0.04)7.5 Melt Spun Ribbons
Optical and Structural Characterization of ZnO Films Deposited by Chemical Bath and Activated by Means of Microwaves
Synthesis of ZnO Particles by Electrolysis
Nitrogen Effects on Optical and Electrical Properties of Amorphous Carbon
Electrical Method to Study the Weak Molecular Movements at Nanometric Scale in Low Mobility Materials
Medium Electric Field Electron Injection/Extraction at Metal-Dielectric Interface
PL Properties of SiOx Obtained by HFCVD Technique
Effect of Annealing on the Optical and Structural Properties of TiO2 RF Sputtered Thin Films
Chapter 5: Metals and Alloys
The Backing Bar Role in Heat Transfer on Aluminium Alloys Friction Stir Welding
SEM Characterization of Al3Ni Intermetallics and its Influence on Mechanical Properties of Directionally Solidified Hypoeutectic Al-Ni Alloys
Optimization of Ageing Parameters of a Low Nickel Maraging Steel
Intermetallic Phase Precipitation in Duplex Stainless Steels during High Temperature Exposition
Short Term Oxidation of a Ti-46Al-8Nb Alloy at 700°C in Air
Effect of Heat Treatment on the Corrosion Behaviour of a Mg-Y Alloy in Chloride Medium
Redesign of Exhaust Systems for Naval Gas Turbines: Usage of a New Cr-Mn Austenitic Stainless Steel
EBSD Study of Grain Boundary Evolution after Different Cold Rolling Reduction in Duplex Steel
Effect of Ti on the Corrosion Behaviour of In Situ Mg2Si Particle Reinforced Al–12Si-20Mg-XTi Alloys
Characterizing Precipitation Defects in Nickel Based 718 Alloy
Effect of Carbon Equivalent on Graphite Formation in Heavy-Section Ductile Iron Parts
Composition and Microstructures of Imperial Brass Chinese Coins
Texture and Microstructure of Invar® Deformed by Asymmetrical Rolling
Effect of Mechanical Activation on Ti-50Ni Powder Blends Reactivity
Morphologies of Widmanstätten Structures and Mechanism Formation in Steels
Characterization of the Diffusion Zone Developed in a Bimetallic Steel-Bronze at Interface
Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe Alloy
A Study on CuO-Al2O3 Infiltration by Aluminium
The Relation between the Plunge Pressure and the Mechanical Properties of Friction Stir Welded 3mm Thick AA6082-T651 Sheets
Oxide Inclusions in Steel Welds of Car Body
Welding with High Power Fiber Laser API5L-X100 Pipeline Steel
Microstructural Signatures of Bronze Archaeological Artifacts from the Southwestern Iberian Peninsula
Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels
Secondary Carbide Precipitation in Low Silicon Hot Work Tool Steels
Textural Modifications during Recovery in Ti-Rich Ni-Ti Shape Memory Alloy Subjected to Low Level of Cold Work Reduction
Microstructural Evolution Modelling of Nickel Base Superalloy during Forging
Modifications of Alloying Elements in Martensitic 8-10%Cr-Steels and its Influence of Neutron Irradiation on Material Properties
Microstructure and Hardness of Friction Stir Welds in Pure Copper
Microstructural Development in a Ternary Al-Cu-Si Alloy during Transient Solidification
A Study of Point Defects in the B2-Phase Region of the Fe-Al System by Mössbauer Spectroscopy
The Effect of Widmanstätten and Equiaxed Microstructures of Ti-6Al-4V on the Oxidation Rate and Creep Behavior
Chapter 6: Nanoscaled Materials
Mechanics of Turbostratic Carbon Nanotubes Filled with Ga-Doped ZnS
Tailoring of the Magnetic Properties of Co, Fe and Ni Nanocrystallites
Effect of Surface Modification of Multiwall Carbon Nanotubes on their Electrical and Surface Properties
Consolidation of Cu-nDiamond Nanocomposites: Hot Extrusion vs Spark Plasma Sintering
Crystallization Behaviour of TiO2 Nanoparticle Reinforced Polypropylene
Preparation of YAG Nanoparticles and their Characteristics
Carbon Nanotubes Grown with Non-Ferromagnetic Catalysts in Alcohol CVD
Synthesis and Characterization of Nanoparticles and Nanocrystalline Functional Films
Synthesis and Characterization of Nitrogen Doped Carbon Nanotubes
Synthesis of Carbon Nanotubes on Zeolite Substrate of Type ZSM-5
Vanadium(V) Oxide – Metal Organic Nanocomposites as Electrochemical Sensing Materials
Chapter 7: Polymers
Biodegradable Agar Extracted from Gracilaria Vermiculophylla: Film Properties and Application to Edible Coating
Semi Crystalline Behaviour of Cassava Starch Films Plasticized with Glycerol
Physical Properties of Gelatin Films Plasticized with Glycerol, Studied by Spectroscopic Methods
Light-Induced Functionalization of Amphiphilic Block Copolymers: Application to Nanoparticles for Drug Targeting
Tuning Active Magnetorheological Elastomers for Damping Applications
Role of Ultraviolet Absorbers (UVA) and Hindered Amine Light Stabilizers (HALS) in ABS Stabilization
Modified Polysaccharides as New Commodity Materials and for Light-Converting Systems: Syntheses, Characterization and Processing
Shear Modulus and Strength of an Acrylic Adhesive by the Notched Plate Shear Method (Arcan) and the Thick Adherend Shear Test (TAST)
Preparation and Characterization of Amorphous Silica Organofunctionalised with 2-Mercaptobenzimidazole
Investigations of the Correlation between the Preparation Method and the Properties of Anilinic Derivative Functionalised Polymer Thin Films for Non-Linear Optical Applications
Modification of Poly(Ethylene Terephthalate) Track Membrane Properties by Plasma Chemical Method
Polymer Composite Nanomembranes with Asymmetry of Conductivity
Synthesis of Biodegradable Copolymers Based on Ethylene Vinyl Acetate and Polylactic Acid
Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres
Modelling of the Thermal Behaviour of Free Form Extrusion
The Morphology during Extrusion of PA6/PP Blends in the Presence of Nanoclays
Surface Modification on Polyamide 6.6 with Double Barrier Discharge (DBD) Plasma to Optimise Dyeing Process by Direct Dyes
Chapter 8: Materials for Energy Production, Transport and Storage
Absorption Enhancement of Solar Concentrators via New Surface Photonic Designs
Plasmon-Enhanced Luminescence Useful for Wavelength Shifting in Solar Cells
Advanced Multi-Metallic SOFC Anode Development by Mechanical Alloying Route
Synthesis, Characterization and Electrical Properties of Single Phase La0.9Sr0.1Ga0.8Mg0.2O3
Structural and Hydrogenation Properties of Zr0.9Ti0.1Cr1.2-xV0.8Nix (x=0, 0.4) Compounds
Effect of V Substitution on the Composite Zr-Ti-Cr-V-Ni Intermetallic Hydrides
Catalytic Activity of Ni3Al Foils in Methanol Reforming
Synthesis of La1-xSrxCoO3-d by a Polymeric Precursor Route Using Microwave Heating
Wet Chemical Synthesis of La1-xSrxGa0.8Mg0.2O3-d (x=0.1, 0.2, 0.3) Powders
Chapter 9: Powder Materials and Powder Technology Processes
Influence of Sn Addition on the Amorphization and Thermal Stability of CuTiZrNi Powders Processed by Mechanical Alloying
Fe K-Edge XAFS Study of Slate Powders Heat Treated up to 1000°C
Powder Metallurgical Processes for NiTi Shape Memory Alloys
Effect of Milling Energy Modulation on the High Temperature Synthesis of FeTi
X-Ray Diffraction and Mössbauer Studies of Sigma-FeV Alloys Ball-Milled in Vacuum
Microwave Sintering – A Novel Approach to Powder Technology
Reduction-Carburization of the Oxides of Ni and W towards the Synthesis of Ni-W-C Carbides
Chapter 10: Surface Modification, Thin Films, Coatings and Corrosion
Growth Defects and Surface Roughness in TiN-Coated Tool Steel at Various N2 Gas Flow Rates Using Cathodic Arc PVD Technique
Surface Structure of NiTi Alloy Passivated by Autoclaving
Surface Topography of Coated Papers: From the Evaluation Process to the Quality Improvement
Surface Protection of the Steel Sheet with Zn-Fe Alloys
Effect of RF Power on the Properties of Magnetron Sputtered ZnO:Al Thin Films Deposited at Room Temperature
Corrosion Protective Properties of Hydrotalcites Doped Hybrid Sol-Gel Coatings on Aluminium Substrates
Influence of Surface Finishing on Corrosion Behaviour of Mg-Al Hydrotalcite Doped Hybrid Sol-Gel Coatings on Al Alloy in Saline Environment
Structure and Properties of Nickel Aluminide Layers on INCONEL 100
Modification of the Surface Layers of Fluoropolymer Films by DC Discharge for the Purpose of the Improvement of Adhesion Properties
Evaluation of Metallic Corrosion Caused by Alcohol Fuel and Some Contaminants
Some Long Term Corrosion Patterns in Archaeological Metal Artefacts
The Hydrogen Evolution Reaction on Electrolytic Nickel-Based Coatings Containing Metallic Molybdenum
Structure and Corrosion Resistance of Zn-Ni and Zn-Ni-W Coatings
The Production and Properties of Electrolytic Zn-Ni Layers Deposited by Pulse Current Method
The Influence of Sodium Molybdate on the Properties of Zn-Ni Layers Obtained by Electrolytic Deposition
Long-Term Efficiency of Two Organic Corrosion Inhibitors for Reinforced Concrete
Large Surface Area of HMDS Plasma Polymerized Thin Film Used for Production of Miniaturized Structures
Perfluorocompound and Hexamethyldisilazane Thin Film Composite Material Used for Surface Modification
Zn-TiO2 and ZnNi-TiO2 Nanocomposite Coatings: Corrosion Behaviour
Structural Characterization of Intermetallic NiTi Coatings Obtained by Thermal Spray Technologies
Low Energy High Current Pulsed Electron Beam (LEHCPEB) Treatment: An Effective Way for Improving Surface Microstructure and Properties
Characterisation of Ti/Al Multilayered Structures with Slow Positron Beams Applying a Simplified Positron Depth Distribution Model
Chapter 11: Simulation and Modelling of Materials and Structures
Obtaining an Optimum Weight for a Composite Pressure Vessel
Finite Element Modelling of Ni-Ti Shape Memory Alloys
Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel Samples
Material Parameter Identification of Cazacu’s Model for Ti6Al4V Using the Simulated Annealing Algorithm
3D-FEM Simulation and Design Optimization of the Diamond Cutting Tools under Various Loading Conditions
Modelling of Low Cycle Fatigue Initiation of 316LN Based on Crystalline Plasticity and Geometrically Necessary Dislocations
Analytical Solution for Free Vibration of Sandwich Structures with a Functionally Graded Syntactic Foam Core
Taguchi Analysis of the Effect of Process Parameters in Friction Stir Welding
Strength Prediction and Experimental Validation of Adhesive Joints Including Polyethylene, Carbon-Epoxy and Aluminium Adherends
Laser Hardening of XC42 Steel: Numerical Analysis of Quenched Area
Fatigue Crack Growth Modeling in Stiffened Panels Considering Residual Stress Effects
Application of the Dang Van Fatigue Criterion to the Rail/Wheel Contact Problem
Determination of Stress-Strain Curve through Berkovich Indentation Testing
A Numerical Study on the Mechanical Behaviour of Hard Coatings with Ductile Interlayers under Depth-Sensing Indentation
An Experimental Characterization of Cork Storage Modulus for Cork-Steel Applications in Vibration Attenuation
Modelling of a Piezoelectric Polymer Film System for Biosensing Applications
Chapter 12: Aggregate, Petrous and Cementitious Materials
Elastic Work and Fracture Energy of Concretes Made with Crushed Stones and Pebbles Aggregates
New Construction Materials: Calcined Paper Sludges as Active Additions
The White Cement Behaviour with Different Materials Addition Submitted to UltraViolet Light Exposure
Nucleation of Portlandite Clusters in Cement Paste at Very Early Stage of Hydration
Determination of Calcium Ions in Hydrated Cement Paste at Early Stage
Quartzite Quarry Waste Recovery: A Case Study
Role of Combined Water for Determining the Mechanical Behaviour of Class C Fly Ash Belite Cements
Characterization of Portuguese Historical Gypsum Mortars: A Comparison between Two Case Studies
The Application of Fluorescence Microscopy and Scanning Electron Microscopy in the Detection of Delayed Ettringite Formation in Concrete
Influence of Mineral Additions in the Inhibition of Delayed Ettringite Formation in Cement Based Materials – A Microstructural Characterization
Air Lime Mortars: The Influence of Calcareous Aggregate and Filler Addition
Addition of Calcareous Quarry to Bricklaying Mortars - Analysis of the Properties in Fresh State
Alteration Features of Stones Applied in Underground Metro Stations
“White” Crusts on Recent Buildings
Microtomography-Based Pore Structure Modelling of Geologic Materials Used as Building and Dimension Stones
Assessment of the Flexural Behavior of Concrete Block Masonry Beams
Influence of the Geometry of Units and of the Filling of Vertical Joints in the Compressive and Tensile Strength of Masonry
Behaviour of Cement and Polymer Mortar Materials to Rapid Freeze-Thaw Cycling
Analysis of Strength Scaling Effect in Portuguese Limestone: Comparison between Three- and Four-Point Bending Tests
Study of Aggregate Size Effect on Fracture Toughness of Petreous Macrocomposites (Concrete)
The Effect of Chlorides on the Thaumasite Form of Sulfate Attack in Limestone Cement Concrete
A Study on the Chloride Diffusion into Portland Limestone Cement Concrete
Chapter 13: Recycling, Eco Friendly Materials and Processes
Development of Permeable Reactive Barrier for Phosphorus Removal
Malayaite Ceramic Pigments Prepared from Industrial Wastes: Formulation and Characterization
Photocatalytic Decolourisation of Orange II Aqueous Solutions by TiO2 and ZnO Active Layers Screen Printed on Ceramic Tiles
Characterization of the Surface of Activated Carbons Produced from Tire Residues
Hydrothermal Synthesis of Na-LTA, Na-X and HS Zeolites from Tunisian Sand and Aluminum Scraps
Incorporation of Coating Plaster Residues in the Formulation of Red Ceramic Mass
Designing Activated Carbons from Natural and Synthetic Raw Materials for Pollutants Adsorption
Synthesis and Characterization of Biodiesel from Coconut Oil Using Homogeneous Catalyst
