Sonstiges, Englisch, 1600 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1600 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908454-87-8
Verlag: Trans Tech Publications
Chapter 1: biomaterials and integration of materials into biological systems (14 papers); Chapter 2: ceramics (12 papers); Chapter 3: composite materials (18 papers); Chapter 4: electronic, magnetic and photonic materials (25 papers); Chapter 5: metals and alloys (31 papers); Chapter 6: nanoscaled materials (11 papers); Chapter 7: polymers (17 papers); Chapter 8: materials for energy production, transport and storage (9 papers); Chapter 9: powder materials and powder technology processes (7 papers); Chapter 10: surface modification, thin films, coatings, and corrosion (22 papers); Chapter 11: simulation and modelling of materials and structures (16 papers); Chapter 12: aggregate, petrous and cementitious materials (22 papers); Chapter 13: recycling, eco-friendly materials and processes (12 papers); Chapter 14: fracture, fatigue, creep and wear (12 papers); Chapter 15: sensors and inspection techniques (4 papers).
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Biomimetic and Smart Polymeric Surfaces for Biomedical and Biotechnological ApplicationsChlorapatite Conversion to Hydroxyapatite under High Temperature Hydrothermal ConditionsElectrochemical Formation and Corrosion Properties of Porous TiOx BiomaterialsPreparation of Chitosan Scaffolds for Tissue Engineering Using Supercritical Fluid TechnologyBioactivity and Viscoelastic Characterization in Physiological Simulated Conditions of Chitosan/Bioglass? Composite MembranesNew Composite Membranes Containing Bioactive Glass-Ceramic Nanoparticles and Chitosan for Biomedical ApplicationsSimulating Human Physiological Response with a Thermal Manikin Testing Different Non Active Medical DevicesImprovement of the Mechanical Properties of Glasses Based on the 3CaO.P2O5-SiO2-MgO System after Heat-Treatment Mechanical Behaviour of ZrO2-Bioglass Dental Ceramics under Cyclic Fatigue LoadingOrdered Mesoporous Silica Materials for Protein AdsorptionAnalysis of Fibrous Composition for Hygienic Purpose ? Recommendations for Application on Feminine UnderwearEffect of Heat Treatments on Mechanical Properties and Fatigue Resistance of Ti-35Nb Alloy Used as BiomaterialTri-Block Copolymers Obtained by RAFT Polymerization: A Promising Material for Drug-Delivery SystemsStudy of Adhesion Relationship of Hydroxyapatite-Titania Coating Obtained by HVOFImpedance Spectroscopy Evolution upon Sintering of Alumina Bodies Containing Al-Rich Anodizing SludgeInfluence of Yttrium Oxide in the Volatilization of the Silica Contained in ZirconCordierite Foam Supports Washcoated with Zeolite-Based Catalysts for Volatile Organic Compounds (VOCs) Combustion Lead Free CaTiO3-Based Ceramics: Sintering, Phase Transitions and Dielectric PropertiesKinetics of Defect-Induced Cation Redistribution in (CoxMg1-x)2SiO4 OlivinesInfluence of Surface Area on the Flowability Behaviour of Self-Flow Refractory CastablesFine-Grained Si3N4-Containing Ceramics from NanopowdersStructural Characterisation and Mechanical Stability of Titanium Substituted Mesoporous MaterialsCorrosion Resistance of Alumina-Sialon Refractories for Application in Aluminium IndustryThe Effect of Synthesis Parameters on the Structure and Properties of Metakaolin Based GeopolymersSynthesis and Characterisation of Slag Based GeopolymersThermal Conductivity of Porous Alumina-Zirconia Prepared by Foam Technique for Applications in Cooling Systems of Artificial SatellitesMachinability of Al-4%wt Mg-Al2O3-Graphite Composites Produced by Compo-Casting TechniqueNanocrystallite Characterization of the MMC 316L-0.3%wtY2O3-3%wtTaC by Rietveld Refinement MethodThe Properties and Structure of Infiltrated High Speed Steel-Tungsten Carbide-Copper CompositesThe Effect of Ti Addition on the Properties of Al-B4C Interface: A Microstructural Study Fabrication and Characterization of Halogen-Free Flame Retardant Polyolefin FoamsDrilling of Carbon Fibre Reinforced Laminates ? A Comparative Analysis of Five Different Drills on Thrust Force, Roughness and DelaminationGlass/Polyvinyl Chloride CompositesProduction of Thermoplastic TowpregsEcodesign Applied to Components Based on Sugarcane Fibers CompositesStrength Prediction of Adhesively-Bonded Scarf Repairs in Composite Structures under BendingMechanical Behaviour Analysis of Polymer Mortars Reinforced with Jute and Piassava Natural Fibres under Alkaline EnvironmentsMechanical Behaviour of Sandwich Beams Manufactured with Glass or Jute Fiber in Facings and Cork Agglomerates as CoreThermo-Mechanical Treatment to Improve Properties of Sisal Fibres for CompositesExploring the Use of Cork Based Composites for Aerospace ApplicationsSuitability of Corkrubber Gaskets in Gasoline-Ethanol BlendsChemical and Thermal Characterization of Road Bitumen AgeingViscoelastic Properties Assessment of Syntactic Foams by Dynamic Mechanical Analysis Shock Resistance and Compression Analysis of Concrete in Expanded Polystyrene Formworks (EPSFWs)Combinatorial Study of New Materials Sensing High TemperatureYtterbium/Yttrium Oxide Superlattices Sensing Strain under High TemperatureInvestigations on Humidity Sensing Properties of Thick Films of the TiO2:WO3 SystemHumidity ITO Thick Film Sensing Behaviour Investigated by Impedance SpectroscopyComputational Study of the Influence of Polymer/Polymer Interface Formation on Bilayer-LED FunctioningTheoretical Study of the Influence of Chemical Defects on the Molecular Properties of Semiconducting PolymersInfluence of Oxygen Stoichiometry and Cation Ordering on Magnetoresistive Properties of Sr2FeMoO6?dSynthesis and Optical Characterization of Pr3+ Doped UV Emitting Luminescent CeramicsTechnology of PLZT Material Used for Photovoltaic Driven Piezoelectric TransformersProperties of Co Substituted Bismuth Ferrite System by Rapid Liquid Phase SinteringEffect of the Nanostructure Control on the Novel Optical Properties of Silica Photonic Glass Synthesized by VAD MethodElectrical and Mechanical Examination of PLZT/PZT Graded Structure for Photovoltaic Driven Piezoelectric TransformersHighly Luminescent CdTe Nanocrystals Synthesized in Aqueous Solution and Self-Assembled on Polyelectrolyte MultilayersSynthesis and Characterization of Novel Donor-Acceptor Oligothiophenes as Efficient and Thermally Stable Second-Order Nonlinear Optical ChromophoresSynthesis and Characterization of New Push-Pull Anthraquinones Bearing an Arylthienyl-Imidazo Conjugation Pathway as Efficient Nonlinear Optical ChromophoresPiezoelectric PZT Thin Films on Flexible Copper-Coated Polymer FilmsPiezoelectric and Ultrasonic Studies of Mixed AgxCu1-xInP2(S,Se)6 Layered Crystals Structural and Magnetic Properties of Sm(CobalFe0.1Ni0.12Zr0.04B0.04)7.5 Melt Spun RibbonsOptical and Structural Characterization of ZnO Films Deposited by Chemical Bath and Activated by Means of MicrowavesSynthesis of ZnO Particles by ElectrolysisNitrogen Effects on Optical and Electrical Properties of Amorphous CarbonElectrical Method to Study the Weak Molecular Movements at Nanometric Scale in Low Mobility MaterialsMedium Electric Field Electron Injection/Extraction at Metal-Dielectric Interface PL Properties of SiOx Obtained by HFCVD TechniqueEffect of Annealing on the Optical and Structural Properties of TiO2 RF Sputtered Thin FilmsThe Backing Bar Role in Heat Transfer on Aluminium Alloys Friction Stir WeldingSEM Characterization of Al3Ni Intermetallics and its Influence on Mechanical Properties of Directionally Solidified Hypoeutectic Al-Ni AlloysOptimization of Ageing Parameters of a Low Nickel Maraging SteelIntermetallic Phase Precipitation in Duplex Stainless Steels during High Temperature ExpositionShort Term Oxidation of a Ti-46Al-8Nb Alloy at 700?C in AirEffect of Heat Treatment on the Corrosion Behaviour of a Mg-Y Alloy in Chloride MediumRedesign of Exhaust Systems for Naval Gas Turbines: Usage of a New Cr-Mn Austenitic Stainless SteelEBSD Study of Grain Boundary Evolution after Different Cold Rolling Reduction in Duplex SteelEffect of Ti on the Corrosion Behaviour of In Situ Mg2Si Particle Reinforced Al?12Si-20Mg-XTi AlloysCharacterizing Precipitation Defects in Nickel Based 718 AlloyEffect of Carbon Equivalent on Graphite Formation in Heavy-Section Ductile Iron PartsComposition and Microstructures of Imperial Brass Chinese Coins Texture and Microstructure of Invar? Deformed by Asymmetrical RollingEffect of Mechanical Activation on Ti-50Ni Powder Blends ReactivityMorphologies of Widmanst?tten Structures and Mechanism Formation in SteelsCharacterization of the Diffusion Zone Developed in a Bimetallic Steel-Bronze at Interface Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe AlloyA Study on CuO-Al2O3 Infiltration by AluminiumThe Relation between the Plunge Pressure and the Mechanical Properties of Friction Stir Welded 3mm Thick AA6082-T651 SheetsOxide Inclusions in Steel Welds of Car BodyWelding with High Power Fiber Laser API5L-X100 Pipeline SteelMicrostructural Signatures of Bronze Archaeological Artifacts from the Southwestern Iberian PeninsulaPrecipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels Secondary Carbide Precipitation in Low Silicon Hot Work Tool Steels Textural Modifications during Recovery in Ti-Rich Ni-Ti Shape Memory Alloy Subjected to Low Level of Cold Work ReductionMicrostructural Evolution Modelling of Nickel Base Superalloy during ForgingModifications of Alloying Elements in Martensitic 8-10%Cr-Steels and its Influence of Neutron Irradiation on Material PropertiesMicrostructure and Hardness of Friction Stir Welds in Pure CopperMicrostructural Development in a Ternary Al-Cu-Si Alloy during Transient Solidification A Study of Point Defects in the B2-Phase Region of the Fe-Al System by M?ssbauer SpectroscopyThe Effect of Widmanst?tten and Equiaxed Microstructures of Ti-6Al-4V on the Oxidation Rate and Creep BehaviorMechanics of Turbostratic Carbon Nanotubes Filled with Ga-Doped ZnSTailoring of the Magnetic Properties of Co, Fe and Ni NanocrystallitesEffect of Surface Modification of Multiwall Carbon Nanotubes on their Electrical and Surface PropertiesConsolidation of Cu-nDiamond Nanocomposites: Hot Extrusion vs Spark Plasma SinteringCrystallization Behaviour of TiO2 Nanoparticle Reinforced PolypropylenePreparation of YAG Nanoparticles and their CharacteristicsCarbon Nanotubes Grown with Non-Ferromagnetic Catalysts in Alcohol CVDSynthesis and Characterization of Nanoparticles and Nanocrystalline Functional FilmsSynthesis and Characterization of Nitrogen Doped Carbon NanotubesSynthesis of Carbon Nanotubes on Zeolite Substrate of Type ZSM-5Vanadium(V) Oxide ? Metal Organic Nanocomposites as Electrochemical Sensing MaterialsBiodegradable Agar Extracted from Gracilaria Vermiculophylla: Film Properties and Application to Edible CoatingSemi Crystalline Behaviour of Cassava Starch Films Plasticized with GlycerolPhysical Properties of Gelatin Films Plasticized with Glycerol, Studied by Spectroscopic MethodsLight-Induced Functionalization of Amphiphilic Block Copolymers: Application to Nanoparticles for Drug Targeting Tuning Active Magnetorheological Elastomers for Damping ApplicationsRole of Ultraviolet Absorbers (UVA) and Hindered Amine Light Stabilizers (HALS) in ABS StabilizationModified Polysaccharides as New Commodity Materials and for Light-Converting Systems: Syntheses, Characterization and ProcessingShear Modulus and Strength of an Acrylic Adhesive by the Notched Plate Shear Method (Arcan) and the Thick Adherend Shear Test (TAST)Preparation and Characterization of Amorphous Silica Organofunctionalised with 2-MercaptobenzimidazoleInvestigations of the Correlation between the Preparation Method and the Properties of Anilinic Derivative Functionalised Polymer Thin Films for Non-Linear Optical ApplicationsModification of Poly(Ethylene Terephthalate) Track Membrane Properties by Plasma Chemical MethodPolymer Composite Nanomembranes with Asymmetry of ConductivitySynthesis of Biodegradable Copolymers Based on Ethylene Vinyl Acetate and Polylactic AcidDegradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres Modelling of the Thermal Behaviour of Free Form ExtrusionThe Morphology during Extrusion of PA6/PP Blends in the Presence of NanoclaysSurface Modification on Polyamide 6.6 with Double Barrier Discharge (DBD) Plasma to Optimise Dyeing Process by Direct DyesAbsorption Enhancement of Solar Concentrators via New Surface Photonic DesignsPlasmon-Enhanced Luminescence Useful for Wavelength Shifting in Solar Cells Advanced Multi-Metallic SOFC Anode Development by Mechanical Alloying RouteSynthesis, Characterization and Electrical Properties of Single Phase La0.9Sr0.1Ga0.8Mg0.2O3Structural and Hydrogenation Properties of Zr0.9Ti0.1Cr1.2-xV0.8Nix (x=0, 0.4) Compounds Effect of V Substitution on the Composite Zr-Ti-Cr-V-Ni Intermetallic HydridesCatalytic Activity of Ni3Al Foils in Methanol ReformingSynthesis of La1-xSrxCoO3-d by a Polymeric Precursor Route Using Microwave HeatingWet Chemical Synthesis of La1-xSrxGa0.8Mg0.2O3-d (x=0.1, 0.2, 0.3) Powders Influence of Sn Addition on the Amorphization and Thermal Stability of CuTiZrNi Powders Processed by Mechanical AlloyingFe K-Edge XAFS Study of Slate Powders Heat Treated up to 1000?CPowder Metallurgical Processes for NiTi Shape Memory AlloysEffect of Milling Energy Modulation on the High Temperature Synthesis of FeTiX-Ray Diffraction and M?ssbauer Studies of Sigma-FeV Alloys Ball-Milled in VacuumMicrowave Sintering ? A Novel Approach to Powder TechnologyReduction-Carburization of the Oxides of Ni and W towards the Synthesis of Ni-W-C CarbidesGrowth Defects and Surface Roughness in TiN-Coated Tool Steel at Various N2 Gas Flow Rates Using Cathodic Arc PVD TechniqueSurface Structure of NiTi Alloy Passivated by AutoclavingSurface Topography of Coated Papers: From the Evaluation Process to the Quality ImprovementSurface Protection of the Steel Sheet with Zn-Fe AlloysEffect of RF Power on the Properties of Magnetron Sputtered ZnO:Al Thin Films Deposited at Room TemperatureCorrosion Protective Properties of Hydrotalcites Doped Hybrid Sol-Gel Coatings on Aluminium SubstratesInfluence of Surface Finishing on Corrosion Behaviour of Mg-Al Hydrotalcite Doped Hybrid Sol-Gel Coatings on Al Alloy in Saline EnvironmentStructure and Properties of Nickel Aluminide Layers on INCONEL 100Modification of the Surface Layers of Fluoropolymer Films by DC Discharge for the Purpose of the Improvement of Adhesion PropertiesEvaluation of Metallic Corrosion Caused by Alcohol Fuel and Some ContaminantsSome Long Term Corrosion Patterns in Archaeological Metal ArtefactsThe Hydrogen Evolution Reaction on Electrolytic Nickel-Based Coatings Containing Metallic MolybdenumStructure and Corrosion Resistance of Zn-Ni and Zn-Ni-W CoatingsThe Production and Properties of Electrolytic Zn-Ni Layers Deposited by Pulse Current MethodThe Influence of Sodium Molybdate on the Properties of Zn-Ni Layers Obtained by Electrolytic DepositionLong-Term Efficiency of Two Organic Corrosion Inhibitors for Reinforced ConcreteLarge Surface Area of HMDS Plasma Polymerized Thin Film Used for Production of Miniaturized StructuresPerfluorocompound and Hexamethyldisilazane Thin Film Composite Material Used for Surface ModificationZn-TiO2 and ZnNi-TiO2 Nanocomposite Coatings: Corrosion BehaviourStructural Characterization of Intermetallic NiTi Coatings Obtained by Thermal Spray TechnologiesLow Energy High Current Pulsed Electron Beam (LEHCPEB) Treatment: An Effective Way for Improving Surface Microstructure and PropertiesCharacterisation of Ti/Al Multilayered Structures with Slow Positron Beams Applying a Simplified Positron Depth Distribution ModelObtaining an Optimum Weight for a Composite Pressure VesselFinite Element Modelling of Ni-Ti Shape Memory AlloysNumerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel SamplesMaterial Parameter Identification of Cazacu?s Model for Ti6Al4V Using the Simulated Annealing Algorithm3D-FEM Simulation and Design Optimization of the Diamond Cutting Tools under Various Loading ConditionsModelling of Low Cycle Fatigue Initiation of 316LN Based on Crystalline Plasticity and Geometrically Necessary DislocationsAnalytical Solution for Free Vibration of Sandwich Structures with a Functionally Graded Syntactic Foam CoreTaguchi Analysis of the Effect of Process Parameters in Friction Stir WeldingStrength Prediction and Experimental Validation of Adhesive Joints Including Polyethylene, Carbon-Epoxy and Aluminium AdherendsLaser Hardening of XC42 Steel: Numerical Analysis of Quenched AreaFatigue Crack Growth Modeling in Stiffened Panels Considering Residual Stress EffectsApplication of the Dang Van Fatigue Criterion to the Rail/Wheel Contact ProblemDetermination of Stress-Strain Curve through Berkovich Indentation TestingA Numerical Study on the Mechanical Behaviour of Hard Coatings with Ductile Interlayers under Depth-Sensing IndentationAn Experimental Characterization of Cork Storage Modulus for Cork-Steel Applications in Vibration AttenuationModelling of a Piezoelectric Polymer Film System for Biosensing ApplicationsElastic Work and Fracture Energy of Concretes Made with Crushed Stones and Pebbles AggregatesNew Construction Materials: Calcined Paper Sludges as Active AdditionsThe White Cement Behaviour with Different Materials Addition Submitted to UltraViolet Light ExposureNucleation of Portlandite Clusters in Cement Paste at Very Early Stage of HydrationDetermination of Calcium Ions in Hydrated Cement Paste at Early StageQuartzite Quarry Waste Recovery: A Case StudyRole of Combined Water for Determining the Mechanical Behaviour of Class C Fly Ash Belite CementsCharacterization of Portuguese Historical Gypsum Mortars: A Comparison between Two Case StudiesThe Application of Fluorescence Microscopy and Scanning Electron Microscopy in the Detection of Delayed Ettringite Formation in ConcreteInfluence of Mineral Additions in the Inhibition of Delayed Ettringite Formation in Cement Based Materials ? A Microstructural CharacterizationAir Lime Mortars: The Influence of Calcareous Aggregate and Filler AdditionAddition of Calcareous Quarry to Bricklaying Mortars - Analysis of the Properties in Fresh StateAlteration Features of Stones Applied in Underground Metro Stations?White? Crusts on Recent BuildingsMicrotomography-Based Pore Structure Modelling of Geologic Materials Used as Building and Dimension StonesAssessment of the Flexural Behavior of Concrete Block Masonry BeamsInfluence of the Geometry of Units and of the Filling of Vertical Joints in the Compressive and Tensile Strength of MasonryBehaviour of Cement and Polymer Mortar Materials to Rapid Freeze-Thaw CyclingAnalysis of Strength Scaling Effect in Portuguese Limestone: Comparison between Three- and Four-Point Bending TestsStudy of Aggregate Size Effect on Fracture Toughness of Petreous Macrocomposites (Concrete) The Effect of Chlorides on the Thaumasite Form of Sulfate Attack in Limestone Cement ConcreteA Study on the Chloride Diffusion into Portland Limestone Cement ConcreteDevelopment of Permeable Reactive Barrier for Phosphorus RemovalMalayaite Ceramic Pigments Prepared from Industrial Wastes: Formulation and CharacterizationPhotocatalytic Decolourisation of Orange II Aqueous Solutions by TiO2 and ZnO Active Layers Screen Printed on Ceramic Tiles Characterization of the Surface of Activated Carbons Produced from Tire Residues Hydrothermal Synthesis of Na-LTA, Na-X and HS Zeolites from Tunisian Sand and Aluminum ScrapsIncorporation of Coating Plaster Residues in the Formulation of Red Ceramic Mass Designing Activated Carbons from Natural and Synthetic Raw Materials for Pollutants AdsorptionSynthesis and Characterization of Biodiesel from Coconut Oil Using Homogeneous CatalystWaste Fibre Reinforced EcocompositesOn the Thermal Characterization of Fibers Prepared by Cryogenic Grinding of Scrap TiresCharacterisation of Cutting Systems on Physical Processing of Spent BatteriesPrinted Circuit Boards Recycling: Characterization of Granulometric Fractions from Shredding ProcessDemonstration of the Robustness of Maximum Likelihood Estimation to Distinguish Mixtures of Two Weibull Populations in Failure Data of Brittle MaterialsRepair Welding Effects on the Bending Fatigue Strength of AISI 4130 Aeronautical Steel Used in a Critical to the Flight-Safety StructureRelation between the Mechanical Behaviour of a High Strength Steel and the Microstructure in Gigacycle FatigueEvaluation of the Relationship between Diamond Tool Wear Performance and the Mechanical Properties of the Individual Metallic BindersSANS Investigation of ?? Precipitate Morphology Evolution in Creep Exposed Single Crystal Ni Base SuperalloyMechanical Behaviour of Functionally Graded Composite Vitreous Enamelled Steel SheetsFracture Behaviour of Brazed Soft Martensitic Stainless Steel Joints under Cyclic LoadingBehaviour of Membrane Construction Materials under Multi-Axial Tensile LoadingCreep and Low Cycle Fatigue Characterisation of IN718 TIG Butt-Welds at 620?CCharacterization of Fatigue Crack Growth Rate of AA6056 T651 and T6: Application to Predict Fatigue Behaviour of Stiffened PanelsInterlaminar Fracture Characterization of a Carbon-Epoxy Composite in Pure Mode IIEffect of Water Jet and Electroerosion Cutting on Fatigue Strength of Thick Al-Alloy SheetUse of Guided Waves for Inspection of Composite Skin-Honeycomb CoreApplication of Inverse Methods for Spatial Deconvolution of Pulsed Ultrasound Fields Radiated in SolidsFiber Bragg Grating Sensors Integrated in Polymeric FoilsUltrasonic Inspection of Composite Materials Using Minimum Entropy Deconvolution
