Sonstiges, Englisch, 1010 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1010 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908452-45-4
Verlag: Trans Tech Publications
This special collection covers the latest theoretical, computational and experimental research on fracture and damage mechanics, as well as on structural integrity and durability.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Anisotropic Fracture Behaviour of Progressively Drawn Pearlitic SteelFatigue Crack Growth in Adhesively Bonded Joints with Intermittent ImpactsFinite Element Analysis of Fretting Fatigue Using Different Pad?s Geometries and Compression ForcesEnvironmental Fatigue of 7075-T6 Aluminum AlloyLap Strength of Headed Steel Reinforcements with ConfinementEffectiveness of Linear Notch Mechanics under the Condition of Small Scale YieldingBending Fatigue Strength Evaluation of Notched Structural Steel Sheet Repaired by BoltDamage Identification Using Lamb WavesLife Time Estimation of the Multilayer Plastic PipesExpanded Uncertainty in Measurements of Vertical and Lateral Behaviors for the Rubber-Tired Light Rail VehicleMultiaxial Fatigue Evaluation of ST52-3N Structural SteelWave Radiation from a Stick-Slip-Like Moving SourceA Study on the Fracture Test in Running System of RailwayA Comparative Study of Different Biaxial Fatigue ModelsA Variational Meshless Method for Mixed-Mode Fracture ProblemsFlexural Behavior of Void RC and PC Slab with Polystyrene Forms3D Lattice Fracture Model: Application to Cement Paste at Microscale3D Lattice Fracture Model: Theory and Computer ImplementationStudy on Spins and Deformation Rate of Solid Circular Shafts at Finite Torsion DeformationWedge-Splitting Test ? Determination of Minimal Starting Notch Length for Various Cement Based Composites Part I: Cohesive Crack ModellingWedge-Splitting Test ? Determination of Minimal Starting Notch Length for Various Cement Based Composites Part II: Crack and Notch Fracture Mechanics ApproachesStructure Buckling Load Interval Analysis of Ventilated Supercavitating VehiclesOptimization for Cathodic Protection with Hierarchical Mesh Generation and Genetic AlgorithmFracture Process Zones in Polygranular Graphite in BendingAnisotropic Plastic Deformation and Damage in Commercial Al 2198 T8 Sheet MetalElastoplastic Seismic Response Analysis of Masonry Buildings with Variable Wall Thickness along HeightInvestigation and Analysis on Seismic Damage of Masonry Buildings Subjected to Wenchuan Ms=8.0 EarthquakeThe Effect on Dynamic Properties of Reactive Powder Concrete under High Temperature Burnt and its Micro-Structure AnalysisThe Steady-State Growing Crack-Tip Field Characteristics of Mode I Elastic-Viscoplastic/Rigid Interface CracksParametric Generation of Random Distribution of Fibers in Long-Fiber Reinforced Composites and Micromechanical FE AnalysisMechanical Behavior of Structural Concrete Made with Recycled Aggregates from Tunnel ExcavationCreep Behaviour of Reinforced Masonry Walls by CFRP Sheets and Structural MortarCyclic vs. Static Loading Behaviour of Masonry Blocks: An Approach to Evaluate the Long-Term BehaviourStudy on Non-Local Damage Constitutive Model of Concrete under Freeze-Thaw ActionThe Effect of Damage and Geometrical Variability on the Tensile Strength Distribution of Flax FibersAsymptotic Field near the Tip of a Mode I Quasi-Statically Propagating Crack in Rate-Sensitive MaterialsToughening Analysis of Mixed Cracks in Transformation Toughened Ceramics on Influence of SD EffectAnalysis of Thermo-Mechanical Behavior of Shape Memory AlloysRole of Rate and Temperature on Fracture and Mechanical Properties of PCDFatigue Crack Growth Rates of HPS 485W in ChinaFloor-Beam Web Cutout Shape Analysis to Improve the Fatigue Resistance in Orthotropic Steel Bridge DecksOut-Plane Distortion Induced Fatigue Analysis of Steel BridgesOptimum Design and Numerical Simulation of Automotive Front Side-Door Impact BeamComputational Analysis of the AFM Specimen on Mixed-Mode II and III FractureSelf-Oscillation Cavity Design and Flow Field Analysis of Pipeline SuperchargerMicrobiological Influenced Corrosion Behavior of Full-Coated and Nicked-Coated SpecimensNumerical Investigation of Penetration Performance of Segmented Rod Projectiles with Various ConnectorsEvaluation on Debonding along the Interface of Reinforced Concrete at Elevated TemperatureEvaluation for Expansive Strain of Degraded Mortar with Damage Mechanics ModelAnalysis on Fire Resistance of Reinforced Concrete Beams Base on the Failure ProbabilityComparison between Fatigue Life of Autofrettage and Nonautofrettage Cylinders Using Stress Intensity Factor (K?)Study on Mode I Quasi-Static Growing Crack Field in the Pressure-Sensitive Dilatant MaterialThe Approach on Making Empirical Earthquake Damage Matrix Complete Using Beta DistributionThe Application of Statistical Regression Method on the Seismic Building Economic Loss Evaluation of Yunnan ProvinceA Method for Earthquake Damage Prediction of Building Group Considering Building Vulnerability ClassificationThe Failure Mechanism Analysis on a Reinforced Concrete Frame Structure in Beichuan County - The Heavy Disaster Areas of Wenchuan 8.0 EarthquakeEvaluation of Failure Behavior and Strength of Fractured Rock Sample Using In Situ Triaxial Compression Tests and Expanded Distinct Element MethodStudy on Fracture Behaviors of Injection-Molded Bamboo Fiber/PBS CompositesThree-Dimensional Surface Heat Transfer Coefficient and Thermal Stress Analysis for Ceramics Tube Dipping into Molten MetalEffective Young?s Modulus of Spiral Accumulating Core Used for Permanent Magnet Motor Thermal Stress Analysis for Shrink Fitting System Used for Ceramics Conveying Rollers in the Process of SeparationSingle and Double Edge Interface Cracks in a Bonded Plate under Arbitrary Material CombinationStress Intensity Factors of a Crack on the Interface of Adhesive and AdherentsFatigue Damage Behavior Depending on the Bonding Interface Layer in Copper Film Bonded to Base MetalsA New Damage Variable and its Evaluation Law for Structured SoilMolding Conditions and Mechanical Properties of Jute Fiber Reinforced CompositeLow Cycle Fatigue Behavior of Cast Superalloy Inconel 713LC with Al Coating at 800 ?CFatigue Behavior of Bridge Steel in Very Long Life RegionDynamic Stress Intensity Factor for a Radial Crack on a Circular Cavity in a Piezoelectric MediumStochastic Microscopic Stress Analysis of a Composite Material via Multiscale Analysis Considering Microscopic UncertaintyThe Dynamic Mechanical Properties of CBF Composite Plate and its Sandwich Structure with Aluminum Foam CoreEffect of H2 Gas Environment on Low Cycle Fatigue Crack Initiation and Damage Accumulation of 304 Stainless SteelEffects of Grain Size on Fatigue Crack Propagation in Copper FilmAcoustic Fatigue Crack Growth Prediction in Coupled Air StructuresThe Effects of Trabecular Bone Microstructure on Compression Property of Bovine Cancellous BoneEffects of Stitching Parameters of Non-Crimp Fabrics on the Mechanical Properties of CFRTPThe Dynamic Mechanical Properties Study of Aluminum Alloy Honeycomb Material and its Numerical SimulationDevelopment of Optical Sensor for Detecting Micro Crack on Contact SurfaceMechanical Behavior of Environment-Friendly Green Composites Fabricated with Starch-Based Resin and Short MAO FibersFatigue Analysis of Penetration Assembly Joined by Multi-Pass WeldingOn Electrochemical Polarization Curve and Corrosion Fatigue Resistance of the AZ31 Magnesium AlloyFatigue Crack Propagation Rate in EUROFER 97 Estimated Using Small SpecimensScattering of Out-of-Plane Line Source Load by Shallow-Embedded Circular Lining Structure and Crack in Half SpaceCalculation on High Stress Concentration Field of Elliptical Hole Problems by the MFS Using Dissimilar Allocation of Source LoadsNumerical Simulation on Ultimate Bearing Capacity of FRP Reinforced Concrete Notched BeamsImage Based Displacement Vector Estimation Method around the Fatigue Crack TipArcan-Richard Specimens: Is there a Pure Shear Mode?Experiment Study on Size Effect of Concrete Compress Damage ParametersNumerical Analysis of the Effect of Cope Hole on the Fatigue Strength of Corrugated Web GirdersLinear Viscoelastic Modelling of Damage-Involved Structural Pounding during EarthquakesDetermination of Fatigue Limit by Mono-Axial Tensile Specimens Using Thermal AnalysisTest Study of Shear Strength of High Strength Stone MasonryModelling Aeronautical Composite Laminates Behaviour under Impact Using a Saturation Damage and Delamination Continuous Material ModelFatigue and Fracture Behaviour of Closed Cell Aluminium FoamDamage Evolution of Composite Laminates with Digital Image CorrelationNumerical Investigation on Polar Effects in Localized Shear ZoneExperimental Investigation and Numerical Simulation of Porous Volcano Rock Hypervelocity Impact on Whipple Shield of SpacecraftsFinite Element Analysis for Optimal Heating Condition in Thermal Stress Cleaving of Brittle Materials Using Laser IrradiationDetection of Plural Cracks in an Infinite Plate by PSO AlgorithmAnalysis of Fracture Behavior in Polymer Matrix Composites by Infrared ThermographyNovel Methods for Assessment of Three-Dimensional Constitutive Properties for CompositesAccurate Solutions of Stress Intensity Factors of Standard Fracture Test SpecimensTemperature and Geometry Dependence of Fracture Toughness in "Euro Fracture Dataset"An Analytical Solution for Dynamic Stress Intensity, Kd, under Impact LoadingCrack Width Evolution of R/C Structures Subject to Corrosion and FatigueLow Cycle Fatigue of Cast ?-TiAl Based Alloys at High TemperatureDetermination of Fracture Parameters for Non-Standard Wedge Splitting Specimen of ConcreteInvestigating Faulty Gear-Unit VibrationHigh Temperature Fatigue Behavior of 23Cr26Ni Heat Resistant SteelMixed-Mode Fatigue Characteristics of Composite/Metal InterfacesOn the Crack Initiated from the Bi-Material Notch TipGeneralized Linear Elastic Fracture Mechanics: An Application to a Crack Touching the Bimaterial InterfaceCase Study of Crack Initiation from Bi-Material NotchesMixed-Mode Delamination Failure of Z-Pinned Hybrid Laminated CompositesFracture Properties of PCBN as a Function of Loading Rate and TemperatureStatistical Analysis of Seismic Vulnerability for Various Types of Building Structures in Wenchuan EarthquakeNumerical Simulations on Shape Memory Effect of Shape Memory PolymerA Model of Steel Frame for Simulating Connection FracturesFinite Element Fracture Mechanics Study of Web Connections with Tapered Beam Flange PlatesBiocompatibility and Medical Application of Carbon MaterialAnalysis on Coupling Damage of Liquid Rubber Based Concrete under Fatigue and Impact LoadingAnalytical Solution of Elastic-Plastic Buckling of a Square Steel Tube Column under Axial Compressive Load and Bending MomentEvolution of Aggregate Surface Characteristics in Polishing ProcessEffect of Friction on the Stress Field Strength of Gear CracksThe Application of Neural Networks in the Reliability Evaluation of StructuresLocal Buckling Analysis for Large Diameter Underground Jacked Steel Tubes under External LoadMolecular Dynamics Simulations of Pre-Crack Effects on Deformation and Failure Mechanisms for Pure AluminumFinite Element Analysis of Embedded Parts with Big-Diameter Reinforcing Bar under Shear ForceComparative Analysis of Seismic Damage of the Earthquake Fortification and Non-Earthquake Fortification Masonry BuildingsTypical Seismic Damage Analysis of the Single-Story Reinforced Concrete Industrial Buildings in Hanwang Town in Wenchuan EarthquakeStudy on High Temperature Creep Behaviors of P92 SteelExperiment Research of Environment Effects on Fatigue Life of Carbon/Bismaleimide Composite Laminates with Central HoleInfluence on Scattering of SH-Wave by Surface Ground Isosceles Triangular Hill in Right-Angle Plane with Circular CavityStudy on Long-Term Expansive Deformation of Self-Stressing Concrete with Combined Restrictions of Steel Fibers and Steel BarFinite Element Analysis of Creep and Thermal Stress for Shape Memory Alloy JointFatigue Test and Stress Analysis of Threaded Connection of Arch Bridge Stainless Steel SuspenderEffect of Micro-Climatic Condition on Durability Performance of ConcreteOn Damage and Fracture Mechanics of Shaft Lining under Complicated Loads with Freezing MethodEvaluating Damage of Concrete with Nonlinear Ultrasonic and Acoustic Emission TechniquesExperimental Investigation of Damage Characteristics in Steel Honeycomb Sandwich BeamsCompensation of FSI Analysis to Develop an Alarm System for a Container CraneDamage Development in Hybrid Composite Laminates under Three-Point Bending at Cryogenic TemperaturesTowards a Model for Fresh Granular-Paste Systems Based on Discrete Element MethodDuctile Fracture Simulation of a Pipe under BendingNumerical Simulation of Stress Corrosion Cracking in a Pipe Using S-Version FEMThree-Dimensional Micro Flow-Stress-Damage (FSD) Model and Application in Hydraulic Fracturing in Brittle and Heterogeneous RocksAn Analysis of Non-Uniform Deformation of a Pantograph for Bellows ApplicationsA Numerical and Experimental Study of the RCF Behaviour of PVD-Coated Spur GearsAnalysing of Regularity Microseismic Technique for Warning Fractured Water Inrush in High-Head Mine CurtainEffects of Torsional Plastic Deformation on Fatigue Strength in Copper and AluminumHole Expansion by Using Al-Alloy Specimen and 0.45% Carbon Steel SpecimenFatigue Life Prediction Based on FS Criterion for Multi-Axial LoadingFatigue Characteristics of Bolted Joint under Transverse Vibration ~Influence of Bolt Tightening Conditions on Transverse Fatigue Strength~Finite Element Analysis on Structural Behaviours of Single Shear Cold-Formed Stainless Steel Bolted Connections with Two BoltsAn Experimental Study on Structural Behaviours of Single Shear Cold-Formed Stainless Steel Bolted Connections with Two BoltsA Constitutive Model for Ductile Damage EvolutionAnalysis of Crack-Tip Field of Particulate-Reinforced Composites Taking Account of Particle Size Effect and Debonding DamageCrack Width Analysis of Reinforced Self-Compacting Concrete BeamsFatigue Properties of Dynamically Loaded Self-Compacting ConcreteModeling of Crack Behavior in Austenitic Steel Influenced by Martensitic Phase TransformationSuppression of Fatigue Crack Growth in Austenite Stainless Steel by Cavitation PeeningThe Relationship between Shear Bands and Crack Growth Behavior in Ultrafine Grained Copper Processed by Severe Plastic DeformationFracture Analysis and Fatigue Remaining Life Prediction of Concrete Structural Components Accounting for Tension Softening and Size EffectsDamage Tolerance Evaluation of Cracked Tubular Joints Subjected to Fatigue LoadingCorrelation Analysis of Evaluation Indexes for Freeze-Thaw Damage of Lightweight Aggregate ConcreteThe Experimental Study on Fracture and Damage Mechanism of RC T-BeamFracture and Damage Mechanism of RC Pile Group Foundation under Low Reversed Cyclic LoadingInfluence of Steel Fibre Reinforcement on the Shear Resistance and Crack Pattern Formation of Self-Compacting Concrete BeamsStress Intensity Factors for Surface Semi-Elliptical Crack in Cylindrical Specimen under Combined Torsion and Axial CompressionInteraction of Multiple Circular Inclusions and a Linear Crack by SH-WaveElectrostatic Tractions at Crack Faces Taking into Account Full Piezoelectric Field CouplingHeat Transfer Analysis for FGMs Using SPH-CSPM3-Dimensional Finite Element Analysis of a Vibrating Bellows with a Large DiameterStudy on Spalling of Extremely Heated FRC by Free HexagonsVariation of Structural Capacity of Reinforced Concrete Slab Due to the Repeated Cyclic Loading Idealized for Thermal LoadComponent-Wise Meshing Approach and Evaluation of Bonding Strategy on the Interface of Components for Assembled Finite Element Analysis of StructuresRelaxation of Stress Concentration of a Crack by Stop Drilling Holes and Additional Holes and Its Practical PredictionStrength Analysis of Chassis Structure for Medium-Sized Low-Floor Vehicle under Dynamic Load CasesShear Response of Three-Dimensional Micro-Lattice StructuresEvaluation of Fundamental UHPC Properties According to the Shape of Steel FiberMechanical Characteristics Analysis of Alkali-Activated Fly Ash Cementitious MaterialsThe Influence of Chemical Admixtures on the Autogenous Shrinkage Ultra-High Performance ConcreteComputer Modelling of Crack Propagation in Porous Reactor Core GraphiteOptimum Mixture Design of Bottom Ash Based Alkali-Activated Mortar Using Artificial Neural Networks Relationship between Microscopic Structures and Compressive Strength of Alkali-Activated Fly Ash MortarInvestigation of Surface Crack Types under Axial Compression Loading for a Case-Hardening SteelEffect of Humidity on Fatigue Strength of Age-Hardened Al Alloy under Rotating BendingGiga-Cycle Fatigue Behavior of Notched Specimens for High Speed Steel
In Situ Observation of Crack Propagation in Epoxy Composite Reinforced with Crushed Silica ParticlesNonlinear Propagation of Amplitude-Modulated Ultrasonic Wave in Composite MaterialStereophotogrametric Determination of Crack Initiation and Propagation in Tooth RootRetrofitting Effect of Unreinforced Masonry Walls Using FRPsA Comparison of CMOD-Based CTOD and J-Conversion CTOD in Shallow Crack SpecimensFlexural Capacities of One-Way Hollow Slab with Donut Type Hollow SpherePunching Shear Strength of Biaxial Hollow Slab with Donut Type Hollow SphereExperimental Study on Behavior of Flexural Member with Lab-Spliced GFRP BarVariational Principle of Carbon Nanotubes with Temperature Changes Based on Nonlocal Euler-Bernoulli Beam ModelFatigue Life Prediction Strategies for High-Heat-Load ComponentsNumerical Analysis of the Effect of Added Hole on the Stress Concentration of a Perforated Plate and Determining of Its Optimum LocationMechanical Approach for Predicting Fretting Fatigue StrengthUnderstanding and Modeling of Stress Corrosion Cracking (SCC)Study on Fatigue Traffic Loading for Highway Bridges in ChinaMeasurement of Crystal Grain Size of Austenitic Stainless Steels under Low-Cycle Fatigue by EBSD TechniquesPreliminary Finite Element Analysis of Shot Peening for Austenitic Stainless SteelsResearch on the Propagation Pattern of 3-D Initial Crack in Rock-Like Material under Uniaxial TensionExperimental Investigation on the Residual Stresses Induced by a Plastic Forming ProcessModelling of Cyclic Plasticity and Crack PropagationMechanical Property Enhancement for Al Based Metal Matrix CompositesAcoustic Monitoring of Hydraulic Fracture Propagation in Pre-Fractured Natural RocksCalculation of Stress Intensity Factor under Mixed Mode Biaxial Tensile Load by Photoelastic Hybrid MethodEffect of Elevated Temperature on the Mechanical Behavior of Natural Aggregate ConcreteMolecular Dynamics Study on Interaction between Voids for Pure AluminumA Method of Fatigue Damage Analysis for Sandwich Panels on ShipMechanical Properties of Shape Memory Alloy Reinforced CompositeFatigue and Acoustic Emission Behavior of Plasma Sprayed HAp Top Coat and HAp/Ti Bond Coat with HAp Top Coat on Commercially Pure TitaniumModeling Fracturing in Rock Using a Modified Discrete Element Method with PlasticityNumerical Simulation of Rubber-to-Steel Bimaterial Bonded Interface Cracking Based on Cohesive ElementAnalysis Method of Crack Propagation Data by Genetic AlgorithmsPilot Study of Reliability Analysis of Damaged Piezoelectric StructureMechanism and Experimental Verification of Degradation of RC Beams Induced by Concrete/Rebar Bonding Failure
