Buch, Englisch, 1100 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2000 g
Buch, Englisch, 1100 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2000 g
ISBN: 978-0-87849-220-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Committees and Foreword
POWDER METALLURGY Characterization
Interstitial Control in Titanium Alloys Produced by Powder Metallurgy
Titanium Nitride Deposition in Titanium Implant Alloys Produced by Powder Metallurgy
Processing of AISI M2 HSS with Addition of NbC by Mechanical Alloying Using two Different Types of Attritor Mills
Effect of Different Concentrations and Sizes of Particles of Rice Husk Ash - RHS in the Mechanical Properties of Polypropylene
Microstructure and Microanalysis Studies of Copper-Nickel-Tin Alloys Obtained by Conventional Powder Metallurgy Processing
Microstructural and Electrical Investigation of Cu-Ni-Cr Alloys Obtained by Powder Metallurgy Method
Structural and Electrical Properties of Copper-Nickel-Aluminum Alloys Obtained by Conventional Powder Metallurgy Method
The Influence of the Velocity of Filtration in the Formation and Removal the Dust Cake
Influence of Fuel in the Synthesis of ZnAl2O4 Catalytic Supports by Combustion Reaction
Influence of the External Heating Type in the Morphological and Structural Characteristics of Alumina Powder Prepared by Combustion Reaction
Electrical Conductivity and Microstructure by Rietveld Refinement of Doped Cu-Ni Powder Alloys
Thermal Interdiffusion Products of U-10Mo in Al Matrix
Fertilizer Drying in a Concurrent Rotary Dryer
Efficiency Evaluation of ZrB2 Incorporation in the MgB2 Matrix Phase Using High-Energy Milling
The Role of Particle Shape on the Sintering of Clay Based Ceramics
Characterization of Proton Exchange Membrane Fuel Cell Cathode Catalysts Prepared by Alcohol-Reduction Process
Comparison of Porosity Measurement Techniques for Porous Titanium Scaffolds Evaluation
Cutting Performance of Diamond Coated Si3N4 Tool During Turning
Ti-13Nb-13Zr Production for Implant Applications
Isochronal Sintering of Ti-35Nb-7Zr-5Ta
Influence of the Particle Size on Phase Transformation Temperatures of Ni-49at.%Ti Shape Memory Alloy Powders
Hydrogenation and Discharge Capacity of a La0.7Mg0.3Al0.3Mn0.4Co0.5Ni3.8 Alloy for Nickel-Metal Hydride Batteries
The Effect of High Charging Rates Activation on the Specific Discharge Capacity and Efficiency of a Negative Electrode Based on a LaMgAlMnCoNi Alloy
Determination of the Crystal Alignment of Pr-Fe-B Magnets Using the (105) X-Ray Pole Figure
Microstructural Analysis of Hardmetal Using WC Nanometric Powders
Microstructural Evolution of Ti-10NB and Ti-15NB Alloys Produced by the Blended Elemental Technique
Comparison of Particle-Wall Interaction Boundary Conditions in the Prediction of Cyclone Collection Efficiency in Computational Fluid Dynamics (CFD) Modeling
Quantitative Determination of the Crystalline Phases of the Ceramic Materials Utilizing the Rietveld Method
Sintering of B4C by Pressureless Liquid Phase Sintering
Effect of Hydrogenation Pressure on Microstructure and Mechanical Properties of Ti-13Nb-13Zr Alloy Produced by Powder Metallurgy
Cobalt-Based Binders and the Efficiency of Diamond Saw Blades
Characterization of HDH Titanium Powder for Biomaterial Applications
Gelcasting of Stainless Steel Powder: An Alternative to Injection Molding
POWDER METALLURGY – Corrosion & Mechanical Properties
Study through Potentiodynamic Techniques of the Corrosion Resistance of Different Aluminium Base MMC´s with Boron Additions
Investigation on the Corrosion Resistance of PIM 316L Stainless Steel in PEM Fuel Cell Simulated Environment
Influence of Silane Films in the Zinc Coating Post-Treatment
Creep Behavior of the Titanium Alloy with Zirconia Plasma Sprayed Coating
Comparation between PIII Superficial and Ceramic Coating in Creep Test of Ti-6Al-4V Alloy
Comparation between Pulsed Nd:YAG Laser Superficial Treatment and Ceramic Coating in Creep Test of Ti-6-4V Alloy
Evaluation of Heat Treatment and Ceramic Coating in Creep of Ti-6Al-4V
POWDER METALLURGY – Heat Treatment
Oxidation Kinetics of the Sintered Iron Parts Steam Treated in an Industrial Continuous Furnace
Covering Steel Surface with Carbon Black by CO2 Laser
Sulfur Dioxide Production from Phosphogypsum: Thermodynamic Analysis and Experimental Results
Biomass Pyrolysis: Use of Some Agricultural Wastes for Alternative Fuel Production
POWDER METALLURGY – Magnetic Materials
Curie Temperature, Microstructure and Magnetic Properties Analysis of Fe-6.5wtSi Alloy Spray Formed as Function of Process Parameters
The Effect of Cu, P, Ga and Gd on Microstructure and Magnetic Properties in the PrFeCoBNb HD Sintered Magnets
The Critical Volume for Nucleation
Effect of Grain Size on the Coercivity of Sintered NdFeB Magnets
Optimizing the Heat Treatment of Rare Earth-Transition Metal Sintered Magnets
The Influence of Praseodymium Content on the Hydrogen Absorption Capability of PrFeCoBNb Magnetic Alloys
Effect of Variables the HDDR Processing on Magnetic Properties and Microstructure in Permanent Magnets Based on Pr-Fe-B
Crystallite Size and Magnetic Properties of HDDR Powders Obtained from PrFeCoBNb Alloys
POWDER METALLURGY – Mechanical Alloying
Effect of the Reinforcement Volume Fraction on Mechanical Alloying of AA2124 – SiC Composite
High-Energy Mechanical Milling of Ultra-High Molecular Weight Polyethylene (UHMWPE)
An Investigation on the Mechanical Alloying of TiFe Compound by High-Energy Ball Milling
The Effect of Mechanical Activation of Elemental Powders on Combustion Synthesis of NbAl3
Formation of Si0.80Ge0.20 Solid Solution by Mechanical Alloying
Synthesis of PbTe Intermetalic Compound by Mechanical Alloying
The Influence of the Milling Environment on the Structure of a W-Cu Composite
POWDER METALLURGY – Metal Matrix Composites
Is Ni a Good Substitue for Co in PM Diamond Cutting Tools?
New Integrated Cermet Powder Preparation and Consolidation Method–Ni-ZrO2 Case
POWDER METALLURGY – Nanomaterials
Effect of Cr3C2-NiCr Powder Characteristics on Structure and Properties of Thermal Sprayed Nanostructured Coatings
Synthesis and Characterization of TiO2 Nanoparticles by the Method Pechini
Porous 3-D Titanium Substrates Obtained by Powder Metallurgy for Nanodiamond Film Growth
POWDER METALLURGY – P/M Application
Preparation of Cutting Inserts with Binder of UHCS
Beta Ti-45Nb and Ti-50Nb Alloys Produced by Powder Metallurgy for Aerospace Application
POWDER METALLURGY – Processing
Fluid Dynamic Study of the Fluidized Bed Wit Jambu Seeds (Sphilantes oleracea L.)
Effect of Process Variables on Efficiency and Particle Growth of Spilanthes oleracea Seeds Coating
Study of the Viability to Obtain Quasicrystal in the Composition AlCuFe Using High-Energy Milling, Followed by Pressing and Sintering
Coating of Granular Polymeric Spacers with Copper by Sputter-Deposition for Enhancing Cell Wall Structure of Sintered Highly Porous Aluminum Materials
Production of Milk of Lime for Sugar Cane Industry: Study of Factors Influencing Lime Slaking
Synthesis of Niobium Carbide (NbC) by Powder Metallurgy High Energy Milling Technique
Mixture of Particles' Influence in Computer Simulations of a Spouted Bed
TIG Welding of Sintered AISI 316 L Stainless Steel
POWDER METALLURGY – Properties
Performance of Thermally Sprayed Coatings under Reciprocal Sliding Test
Wear of Diamond Composites Applied as Inserts in Drilling Tools
POWDER METALLURGY – Sintering
A Novel Method for Obtaining Polycrystalline Diamond Cutters
Automatic Computer Controlled Process for Superhard Materials Production
Study on WC-Co-Diamond-Based Composites Used in Cutters of Drill Bits
Sintering of a SiC-Diamond Composite with a New Setup for the Reactive Cell
POWDER METALLURGY – Spray Forming
Mechanical Properties Evaluation of a Spray Formed AA-6082 Aluminum Alloy
POWDER METALLURGY – Miscellaneous
Application of CFD in the Study of Performance the Cyclone with Different Shapes
Fluid Dynamics Study of the Influence of Direction of the Gas Flow in Fabric Filter
Prediction of Performance of a Hydrocyclone with Filtering Cylinder
Numerical Methodology for Orifice Meter Calibration
Use of a Short Duration Electronic Flash in the Study of the Trajectory of Liquid Jet in a Pease-Anthony Venturi Scrubber
Structural and Morphology Characterization ZSM-5 Zeolite by Hydrothermal Synthesis
Film Fraction and Droplet Size inside of a Rectangular Venturi Scrubber
Evaluation of the Influence of Process Variables on Flotation of Phosphate
Synthesis and Characterization of the Catalysts 5 wt.% and 10 wt.% Co/SBA-15
Influence of Crystallization Time on Structural and Morphological Characteristics the Precursor of Zeolite MCM-22
Coating of Particles in Spouted Bed: Flow Regime and Stability
Effect of the Salt Solution Concentration in the Number and Size Distribution of Atomized Nanometric Aerosol Particles
Solidification of Eutectic Bi32.5In51Sn16.5 Alloy under Microgravity Using a Drop Tube
Pyrolysis of Sugarcane Bagasse: A Consecutive Reactions Kinetic Model from TGA Experiments
Plasma Etching of Stearic Acid in Ar and Ar-O2 DC Discharges
Cost Reductions - Materials
A Comparative Study of the Corrosion Resistance of Stainless Steels Obtained by Powder Metallurgy Techniques for Application in Dental Prosthesis
Effect of Compacting Pressure on Liquid Phase Sintering of ASTM 2124 Alloy
CERAMICS – Ceramic Electric-Electronic
Preparation and Characterization of YSZ Closed-End Tubes for Oxygen Sensors
Strontium Dopant Concentrations Influence on Nd1-xSrxMnO3±d Structural and Electrical Conductivity
Microstructure, Crystalline Phase, and Dielectric Property Analyses of TiO2 Composition with ZrO2 Addition
Sintering Temperature Influence on Microwave Dielectric Properties of TiO2-ZrO2 Ceramics
Effect of Rare Earth Addition on Electrical Properties of Zirconia Based Ceramics
Intermediate Oxide Layers for Direct Bonding of Copper (DBC) to Aluminum Nitride Ceramic Substrates
CERAMICS – Ceramic Matrix Composites
Ceramics Composites Derived From Polysiloxane / Al2O3 / Ti
CERAMICS – Ceramic Processing
Use of Nepheline-Syenite, Talc and Kaolinitic Clay to Obtain Ceramic Tiles
Incorporation of Petroleum Coke into Red Ceramic
Use of Steel Slag into Clayey Ceramics
Electrical Porcelain Containing Ornamental Rock Waste: Microstructural Development
Development and Characterization of Si3N4 Coated AlCrN Ceramic Cutting Tool
102213 Use of High Energy Ball Milling on the Sintering Optimization of Alumina Ceramics
Elaboration of Yttria-Stabilized Zirconia Films on Porous Substrates
Rheological Study of Yttrium Oxide Aqueous Suspensions
Characterization of Clays Used in the Fabrication of Traditional Brazilian Ceramic Pans: Culture and Technique
Development of Ceramic Cutting Tools for Future Application on Dry Machining
Green Stoneware Containing Waste Metals
CERAMICS – Ceramic Structural
Diffusion Study of Alumina Gray Cast Iron Pair
Crystalline Structure and Microstructural Characteristics of the Cathode/Electrolyte Solid Oxide Half-Cells
Incorporation of Civil Construction Rejects Materials in Structural Ceramic
Mechanical Properties of Nanostructured Zirconia
CERAMICS – Nanomaterials
Evaluation of the Behavior of Brazilian Bentonite Clays with Different Quantity of Quaternary Ammonium Salt
Evaluation of NiFe2O4 Spinel, Synthesized by Combustion Reaction, as a Catalyst for Selective CO Oxidation
Use of Brazilian Clay in Nylon 6 with Different Molecular Weight Nanocomposites
Membranes from Nylon 6/Regional Bentonite Clay Nanocomposites
Hydrothermal Synthesis of Nanostructured Titania
Nanocomposite Microcapsules from Powders of Polyhydroxybutyrate (PHB) and Smectite Clays
CERAMICS – Sintering and Properties
Influence of the Sand Addition on the Processing, Properties and Microstructure of Red Ceramic
Two-Step Sintering of Samaria-Doped Ceria
Activation Energy for the Sintering of Clay Based Ceramic Powder
Two-Steps Sintering of Alumina-Zirconia Ceramics
Influence of the Sintering Conditions on the Mechanical Properties of Nanosized TZP Ceramics
Influence of Heat Treatment on the Anelastic Properties of MgB2
Effect of the Pressure and Temperature Cycling in the Sintering of Cubic Boron Nitride Composites under HPHT Conditions
A Method for an Improvement in the Quality of Diamond Composite Thermostable Material
Effect of Nanodiamond Addition on the Mechanical Properties of Polycrystalline Metallic and Polymeric Composites
Electrosintering Production of Novel Grade Diamond Composites
Use of Eucalyptus Firewood Ash into Clayey Ceramic
Porcelain: Convencional and Microwave Sintering
CERAMICS – Synthesis & Biomaterials
Application of the Atomic Absorption Technical to Available the Concentration of Silver Ions Incorporated in Glass Matrix by Ionic Exchange Process
Effect of pH and Fluoride on Behavior of Dental ZrO2 Ceramics in Artificial Saliva
Unidirectional Infiltration Method to Produce Crown for Dental Prosthesis Application
CERAMICS – Synthesis of Ceramic Powders
Use of Microwave Energy for Obtaining the Mullite
Evaluation of the Cu Doping Effects in CeO2 Catalytic Supports Obtained by Combustion Reaction
Morphologic and Structural Characterization of the CoFe2O4 Synthesized by Combustion Reaction
Ni-Zn Nanoferrites Synthesized by Microwave Energy: Influence of Exposure Time and Power
Evaluation of Glycine Excess over NiAl2O4 Catalysts Prepared by Combustion Reaction for Steam Methane Reforming
Development of Polyamide 6/Ferrite Composites for Absorbers of Electromagnetic Radiation
Synthesis of a-Alumina Powder Obtained from Irradiated Pseudoboehmites
Obtaining of Mullite by Rapid Sintering from Bentonite Clay
Synthesis of Ni-Zn Ferrite Catalysts by Combustion Reaction Using Different Fuels
Synthesis of Fine B4C Powder Using B4C Seeding in Carbothermal Reduction Process
Obtaining Tetracalcium Pohosphate and Hydroxyapatite in Powder Form by Wet Method
The Effect of Hydrothermal Treatment on Samaria and Gadolinia Doped Ceria Powders Synthesized by Coprecipitation
Study of Crystallite Size of Yttria-Stabilized Zirconia Powders by Rietveld Method
Synthesis Characterization and Sintering of Cobalt-Doped Lanthanum Chromite Powders for Use in SOFCs
Synthesis of Nickel Oxide - Zirconia Composites by Coprecipitation Route Followed by Hydrothermal Treatment
Hydrothermal Treatment of Coprecipitated YSZ Powders
Quantitative Phases Determination of Zirconia Ceramics via Rietveld Method
Effects of Dependence between Solid Solution and Surface Excess in Nanoparticles
CERAMICS - Miscellaneous
Use of Sludge as Ceramic Materials
Combustion and Pyrolysis of a Sludge Form Wastewater Treatment Plant
The Effect of Anionic Sorption on the Metakaolinite
Comparison of Thermal Analysis, Micro Structural and Compositional of Archeological Indigenous Ceramic (Caninhas Site of Canas - SP) with Actual Clay/Ceramic of Region
Study of Abrasive Ceramic Powders on the Fine Polishing of Metallic and Polymeric Surfaces
Swelling of Brazilian Organoclays in Some Solvents with Application in the Petroleum Industry
Comparative Study of Organophilic Clays to be Used in the Gas & Petrol Industry
Characterization of Civil Construction Waste and its Incorporation to Mortar
Characterization of Sugarcane Bagasse Ash for Use in Ceramic Bodies
Chemical-Environmental Characterization of Waste Coming from Petroleum Industry for Application in Clay Ceramics
Synthesis of Zeolite Membrane (Y/a-Alumina)
Influence of Alkaline Activation over Swelling and Cation Exchange Capacity on Bentonites
Analysis of Used Vegetable Oils Treated with Paraíba/Brazil Clays by Kinematic Viscosity
A Study of the Behavior of Phosphatic Concentrate in Gas Filtration Cake Formation
Polysulfone Activated Carbon Composite Membranes
Study of Oxide Layers in Creep of Ti Alloy
Synthesis and Characterization of Organophilic Clay from Cuban Chiqui Gomez Bentonite
Investigations Hydrodynamics of the Bed Vibrofluidized Rectangular
Physical Characterization and Biomass Fluidization (Fume Powder)
Strontium-Doped Neodymium Manganite Powder Obtained by the Solids Mixture Technique
Filtration of Electrified Solid Particles in a Fibrous Filter
Technology Characterization of Organo-Clays Obtained from Bentonites of the State of Paraiba
Evaluation of S/S Process of Tannery Waste in Cement by Structural and Mechanical Analysis
Applications of Ultra High-Pressure Powder-Abrasive Waterjet
Determining the Lanthanum Chromite Zeta Potential in Aqueous Media
