Sonstiges, Englisch, Band Volume 941, 2604 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
10th International Conference on Processing and Manufacturing of Advanced Materials
Sonstiges, Englisch, Band Volume 941, 2604 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-0357-2208-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Effect of Mo, Nb and V on Hot Deformation Behaviour, Microstructure and Hardness of Microalloyed SteelsExtended Application of Hardness Prediction System for Temper Bead Welding of A533B Steel to Various Low-Alloy SteelsCracking and Failure in a High Strength Low Alloy Steel during SolidificationEffect of Annealing Conditions on the Dissolution Process of Complex Carbonitrides in a V-Nb-Ti Microalloyed SteelThe Effect of Test Temperature on Deformation Microstructure and Fracture Mechanisms in CrMn High-Nitrogen Steels Alloyed (0-3 wt.%) with VanadiumCharacterisation of Precipitation and Coarsening of Carbides during Tempering in a Low Alloyed Quenched and Tempered SteelOn the Microstructural Characteristics of UFG Microalloyed Steel Influencing the Mechanical Behavior under Dynamic LoadingCritical Strain for Complete Austenite Recrystallisation during Rough Rolling of C-Mn Steel and Nb-Ti-V Microalloyed SteelEffect of Quenching and Partitioning Processing on Microstructure and Mechanical Properties of a Low Alloyed SteelOptimization of Pulse-Step Method for Liquid Steel Alloying in One Strand Slab TundishInduction Hardening of a 0.40 % C Novel Microalloyed Steel: Effects of Heating Rate on the Prior Austenite Grain SizeMicroalloying Additions to Commodity C-Mn Structural Steels: Fundamental Strengthening Mechanisms Leading to Improvements in Mechanical Properties, Alloy Optimization, Reduced Alloy Costs and Robustness of Hot Rolling ProcessingAn Integrated Model for Rolling Schedule Design of Microalloyed SteelsInfluence of Aluminium on Castability of V-Microalloyed SteelsThrough-Scale Analysis of Strain Path Effects in Microalloyed Austenite Subjected to Reverse RollingModelling of the Influence of Prior Deformation of Austenite on the Martensite Formation in a Low-Alloyed Carbon SteelHigh Strength High Ductility Low Alloyed SteelEffect of Ti on the Microstructure and Mechanical Properties of a Hot Rolled Advanced High Strength Steel StripSurface Defect Formation in Steel Continuous CastingMicrostructure, Texture, Mechanical and Corrosion Performance of the Stainless Duplex Steel UNS S32205 Submitted to Warm RollingPrediction of the Hydrogen-Induced Damage to Ultra-High Strength Steel ConceptsNucleation Effect of Ca-Oxysulfide Inclusions of Low Carbon Steel in Heat Affected Zone by WeldingRecrystallization and Grain Growth Phenomena in Stainless Steels for Different Thermo-Mechanical ProcessesEvaluation of Nanosize NbC Precipitates in HSLA Steel through Microstructural Analysis and Small Angle Neutron ScatteringTMP as an Effective Technique to Produce Ultra-Fine Grained SteelsCritical Conditions of Cold Cracking in High Strength Steel Weld Based on the Local Stress Distribution and Hydrogen AccumulationEffect of Gap between Steel Sheet and Electrode on Resistance Spot WeldingEffect of Coiling Temperature on the Hardening Mechanisms of a High-Ti SteelNovel Hot-Rolled Structural Plate Steels with Yield Strength of 700 Mpa and Excellent UsabilityDeformation Structures in a Duplex Stainless SteelDevelopment of the Projection Welding Technology for High-Strength Steel SheetsDeformation Properties of Austenitic Stainless Steels with Different Stacking Fault EnergiesUnderstanding Hot vs. Cold Rolled Medium Manganese Steel Deformation Behavior Using In Situ Microscopic Digital Image CorrelationEffect of Original Microstructure on Microstructure and Mechanical Properties of High Strength Steel WHF1500H during Hot FormingCrystal Plasticity Simulation Considering Microstructures of Austenitic Stainless Steel on Macroscopic Yield FunctionAnalyses of Texture and Deformation Mechanism in Fine-Grained Austenitic Stainless Steels by Electron Back Scatter DiffractionMicrostructures and Mechanical Properties of Welded Joints of Several High Tensile Strength SteelChange in Yield Strength of Nb-Bearing Ultra-Low Carbon Steels by Temper-RollingVC-Precipitation Kinetics Studied by Small-Angle Neutron Scattering in Nano-SteelsInfluence of Nb Addition on Impact Toughness of As-Quenched Martensitic Stainless Steel for Automotive ApplicationsFerrite-Martensite Dual-Phase Steel Produced by a Modified Quenching and Partitioning ProcessTemperature Dependent Mechanical Behavior of ODS SteelsInvestigation of the Local Austenite Stability Related to Hydrogen Environment Embrittlement of Austenitic Stainless SteelsNumerical Simulation of Residual Stresses due to Multipass Welding in High Strength Steel Plates and Validation against Experimental MeasurementsMagnetic Barkhausen Noise Characterization of the Recrystallization of a Non-Oriented Electrical Steel after Cold Rolling at Different Angles to the Hot Rolling DirectionNumerical Analysis of Temperature Rise during Dynamic Loading for Dissimilar Steel Joint SpecimenLow Density Steels for ForgingEffect of Al on the Microstructure and Mechanical Properties of Hot-Rolled Medium-Mn SteelMechanical Behavior of High-Mn Steels Processed by Hot RollingInfluence of Starting Microstructure on Dilatation Behavior during Tempering of a High Strength SteelEffect of Tempering on Hardness of Q&T Steel PlateIntegration of Press-Hardening Technology into Processing of Advanced High Strength SteelsMicrostructural Evolution and Deformation Behavior of Cold-Rolled Fe-Mn-Al-C Low-Density SteelIsothermal Transformation, Microstructure and Mechanical Properties of Ausformed Low-Carbon Carbide-Free Bainitic SteelEffect of Precipitation State on Strength and Toughness of Precipitation Hardened Hot Rolled Steel SheetCreep Property of Boron Added 9Cr Heat Resistant Steels after WeldingMicrostructure Evolution and Change in Mechanical Properties of Medium Mn Steels during Thermomechanical ProcessingDesign and Properties of 1000 MPa Strength Level Hot-Formed Steels Possessing Dual-Phase and Complex-Phase MicrostructuresEffect of Different Microstructures on the Performance of Air-Cooled Forging Steel 46MnVS5 Fracture Splitting Connecting RodThe Effect of Heating Rate and Temperature on Microstructure and R-Value of Type 430 Ferritic Stainless SteelHydrogen-Assisted Fracture Mechanisms in Ultrafine-Grained CrNi Austenitic Stainless Steels with Different Initial MicrostructuresEvaluation of Microstructural Characteristics in Low-Cycle Fatigued Austenitic Stainless Steel Using X-Ray Line Profile AnalysisProcessing and Mechanical Properties of Highly Formable Ferritic High Strength Steel Containing Titanium Nanocarbides for Automotive ApplicationsChallenges of Nb Application in Thermomechanical Processes of Steels for Long ProductsAn Integrated Model for Predicting Hierarchical Microstructure Evolution of Steel during Hot RollingEffect of Ausforming on Creep Strength of G91 Heat-Resistant SteelEnvironment-Induced Degradation in Maraging Steel Grade 18Ni1700Microstructures and Properties of DP 600 Steel Conventionally Treated and Intercritically Annealed from As-Quenched MartensiteNotched Creep Damage Assessment Based on EBSD Observation for Austenitic Stainless SteelPorosity Developments within 9Cr-1Mo Steel Exposed to CO2The Effect of Surface Preparation on Surface Damage and Sigma Formation in Duplex Stainless SteelPhysical Simulation Methods Applied to Hot Rolling of Linepipe SteelsPossibilities with Use of Electron Beam Welding of Very High Strength SteelMiddle Shelf During Ductile to Brittle Transition on Ferrite + Pearlite Structure Steel SheetCharacterization of Hot Deformation Behavior in a 13% Chromium SteelMicrostructures and Mechanical Properties of Tough Ductile Ultrahigh-Strength Steels Processed through Direct Quenching and PartitioningEffect of Tempering on Bendability and Impact Property of Hot Rolled Low-Carbon Martensitic SteelSimulation Study on Shear Crack of Steel PlateThe Effects of Hot Deformation of Austenite on the Bainite Transformation in a Fe-C-Mn-Si-Cr SteelThe Study in Improvement of Hole Expansibility for High-Strength Steel of 980MPa GradeEstimation of Impact Toughness Transition Temperatures of As-Quenched SteelsAn Application of Jominy Test Results in Computer Simulation of Steel QuenchingBendability of Shot Blasted Ultrahigh-Strength SteelsThe Study on Welding Technology of 9Ni SteelLink between Microstructure and Mechanical Behavior of Double Annealed Medium Mn SteelMicrostructure Characterization of Quenching and Partitioning SteelsEffect of Gas Tungsten Arc Welding Condition on Hydrogen Absorption in a Duplex Stainless Steel3rd Generation AHSS: Mechanistic Responses Enabling Cold Deformation during StampingPlastic Deformation Simulation of Sintered Ferrous Material in Cold-Forging ProcessEffect of Heat Treatmemt in (a+?) Range on Mechanical Properties of Austempered Spheroidal Graphite Cast IronInfluence of Annealing Conditions on the Austenite Size at the End of SoakingToward the Development of AHSS for Wear Resistant ApplicationsStrengthening Mechanisms in Low Carbon Lath Martensite as Influenced by Austenite ConditioningMicrostructure and Damage Mechanisms in Thermomechanically Treated Si-Solution-Strengthened Spheroidal Graphite Cast IronCharacterisation of Long Term Aging in Esshete 1250 WeldsLow-Temperature Fracture of Ultrafine-Grained IronProperties of Induction Reversion-Refined Microstructures of AISI 301LN under Monotonic, Cyclic and Rolling DeformationReheat Furnace Thermodynamic, Kinetic and Combustion Considerations for TMCP ProcessingBehavior of Fatigue Cracks Generated from a Small Artificial-Defect in Plain Specimen of Copper Processed by Equal Channel Angular PressingAustenite Grain Growth Simulation in Welding Heat-Affected Zone3rd Generation AHSS by Thin Slab TechnologyDynamic Transformation of Austenite at Temperatures above the Ae3Effect of the Austenite Interface on Pearlite Transformation BehaviorStudy on Bainite/Martensite Transformation in Reheated Weld MetalsExperimental Analysis about Heat Treatment Distortion in Bearing RaceSupply Chain Quality Management of Magnesium Components: Concept, Examples and RecommendationsCast Iron Metalworks in European Urban Furniture Dating Back to the 19th and the Early 20th CenturiesMicrostructural Evolution and Wear Behavior Involving the K-Carbides Precipitation of a Fe-25Mn-6.6Al-1.3C Austenitic SteelNumerical Simulation of GMAW Process from the Heat Source to the Weld Pool FormationHot Cracking Susceptibility in Duplex Stainless Steel WeldsInfluence of Cu Addition on Microstructure and Mechanical Properties of Fe-0.08C-1Mn-2.5Ni SteelImpact of L12-Ordered Precipitation on the Strength of Alumina-Forming Austenitic Heat-Resistant SteelsWater Atomized 17-4 PH Stainless Steel Powder as a Cheaper Alternative Powder Feedstock for Selective Laser MeltingHot Straining and Quenching and Partitioning of a TRIP-Assisted Steel: Microstructural Characterization and Mechanical PropertiesAustenitization and Tempering Temperatures Effects on EUROFER 97 SteelEffect of Number of Roughing Passes on the Dynamic Transformation of Austenite during Simulated Plate RollingEffect of Heat Treatment on Impact Properties of TC10 Titanium AlloyTitanium Alloys Anodic Oxidation: Effect of Experimental Parameters on Surface ColouringUltrasonic Spot Welding of an Aluminum Alloy for Automotive ApplicationsElemental Segregation and O-Phase Formation in a Gamma-TiAl AlloyEffect of a2 Precipitation on Creep and Tensile Properties of Ga-Added Near-a Titanium AlloysMicrostructural Comparison of an Al-8.0Zn-1.8Mg-2.0Cu Alloy with Typical T6 and T76 TempersDegradation of Hardness of Alloys from Phase CoarseningFormation of Secondary Phases in the Boundary between Surface Defect Grains and Matrix in Third Generation Nickel-Based Single Crystal Superalloy Turbine BladesStrengthening of a CoCrFeNiMn-Type High Entropy Alloy by Regular Arrays of NanoprecipitatesTechnical Advancement in Fabricating Dispersion Strengthened Copper Alloys by Mechanical Alloying and Hot Isostatic Pressing for Application to Divertors of Fusion ReactorsForging Process Design and Simulation Optimization of a Complex-Shaped Aluminium Alloy ComponentEffect of Grain Size on Mechanical Properties of Mg-0.3at.%Y Dilute AlloyInvestigation of Quench Sensitivity in 6xxx Aluminum AlloysMicrostructural Characterization of Mg-TM (TM=Ni or Cu) - Y Alloys and their Mechanical PropertyStrengthening of Magnesium Alloy WE43 by Rotary SwagingInvestigation and Constitutive Modelling of High Strength 6xxx Series Aluminium Alloy: Precipitation Hardening Responses to FAST (Fast Light Alloys Stamping Technology) and Artificial AgeingTwinning and Detwinning Mechanisms in Beta-Ti AlloysMicrostructures of Ternary Eutectic Refractory Me-Si-B (Me = Mo, V) Alloy SystemsMicrostructure and Texture of Cold Rolled and Recrystallized CrNoNi Medium-Entropy AlloyMechanical Behavior of Titanium Alloys under Different Conditions of LoadingLaser Welding of Titanium Alloys with an Yb: YAG Disk SourceConsolidation of Magnesium and Magnesium Alloy Machine Chips Using High-Pressure TorsionImpact of Initial State during Calibre Rolling: Investigating Microstructure and Mechanical Properties of AZ80 Magnesium AlloyInfluence of Initiation Site and Lamellar Divergency on the Overall Kinetics of Cellular Growth and Coarsening in Aged U-Nb AlloysModification of LPSO Structure in Mg-Ni-Y Alloy with StrontiumPrediction of Magnetostrictive Properties of Fe-Ga Alloy Based on Internal Energy Model with Magnetomechanical EffectApparent Poisson?s Ratio for Fe-Ga Alloy Single Crystal due to MagnetostrictionInvestigation of the Effect of Homogenization Practice of 6063 Alloy Billets on Beta to Alpha Transformation and of the Effect of Cooling Rate on Precipitation KineticsUnique Effect of Carbon Addition on Development of Deformation and Recrystallization Textures in Heavily Cold-Rolled Fe-3%Si AlloysControl of Dispersolds in 7475 Aluminum AlloySolidification and Microstructural Control in Selective Electron Beam Melting of Co-29Cr-10Ni-7W AlloyEffect of Different Shot Peening Treatments on Fatigue Life in Ti AlloyMagnetostrictive Property and Magnetic Domain Structure of Fe-Ga Alloy Single Crystal under Tensile StrainUse of Novel Welding Technologies for High-Entropy Alloys JoiningStructural Stability of Novel Multicomponent AlZn-Based Cast AlloyMicrostructure Development and Related Mechanical Behavior of the ZEW200 Mg Alloy Processed by Differential Speed Rolling and Equal Channel Angular PressingDevelopment of Al-Fe-(Cu) Series Alloys for Aluminum Cables and the Related Annealing BehaviorsPhase Transformations in the Brazing Joint during Transient Liquid Phase Bonding of a ?-TiAl Alloy Studied with In Situ High-Energy X-Ray DiffractionEffect of One-Step and Two-Step Aging Treatments on Microstructure and Properties of an Al-9.0Zn-2.0Mg-2.0Cu AlloyEffect of Alloy Composition and Pre-Ageing on the Stretch Formability of 6xxx Automotive Sheet AlloysCharacterization of Precipitation Evolution in a Zn-Added Al-Mg-Si-Cu Alloy during Artificial Aging at 170 ?CConnecting the Microstructure Stability of Ni Based Superalloys to their Chemical CompositionsMechanical and Microstructural Characterization of Powder Medium Entropy AlloyEffect of Deformation Temperature on Microstructure and Mechanical Properties of Low-Alloyed Copper AlloyExperimental Investigation of Temperature Distribution during Wire-Based Laser Metal Deposition of the Al-Mg Alloy 5087Creep Features of Ti-600 Alloy at the Temperature of 650?CMicrostructural Characteristics of Laser Metal Deposited Magnesium Alloy AZ31Nucleation and Growth of Oxide Particles on Fe-Mn (1 Wt.%) Binary Alloy during AnnealingEffect of Heat Processing Technique on Microstructure and Mechanical Properties of Extrusion Beta Titanium Alloy Tube BlankEvolution of Texture during Hot Rolling of a New Magnesium AlloyThermal Analysis for the Prediction of Grain Refinement: An Experimental Investigation on an AlSiMg Foundry AlloyThe DSC Investigation on Phase Transformations of Directionally Solidified (DS) and Powder Metallurgy (PM) Ni-Base SuperalloysInfluence of Precipitation on Twinning in a Mg-Al-Zn AlloyAn Innovative Industrial Process for Forging 7050 Al AlloyCharacterization of Powder Metallurgy High-Entropy Alloys Prepared by Spark Plasma SinteringDeveloping Superplasticity in High-Entropy Alloys Processed by Severe Plastic DeformationStrain Ratio Effect on the Low Cycle Fatigue Behavior and Microstructure of High-Mn Austenitic Alloy Undergoing the Strain-Induced e-Martensitic TransformationEffect of Sn Content on Heat Resistance of Mg-3%Al-1%Si Alloy for CastingAnnealing on Anisotropy and Mechanical Properties of an Al-Mg-Si AlloyTwo-Step Aging Behaviour of Solution Treated A356 System AlloyCost-Effective Production of High-Property Titanium Alloy from PowderEvaluation on Residual Stresses in Thick Titanium Welded AlloysYb: YAG Laser Welding of Aeronautical AlloysRelationship between Microstructure and Mechanical Strength of Dental Semiprecious Alloys Subjected to Solution TreatmentEffect of Al Content on Microstructure and Properties of AlxMoNbTiV RCCA?s AlloysMicrostructure and Crystallography of ? Phase Formed through Electric Current Pulse (ECP) Treatment in Cold-Rolled Cu-40%Zn AlloyMeasurement of Thermal Expansion Coefficient of MgZnY Alloys with Synchronized Long-Period Stacking Ordered PhaseThe Effect of Crystal Orientation on Damping Capacity in Rolled AZ31 Magnesium AlloyCold Swaging and Recrystallization Annealing of Ti-Nb-Ta-Zr-O Alloy - Microstructure, Texture and Microhardness EvolutionAl, Cu and Zr Addition to High Entropy Alloys: The Effect on Recrystallization TemperatureEffect of Si Content on the Fatigue Fracture Behavior of Wrought Al-xSi-0.7Mg AlloyLaser Beam Welding of IN792 DS SuperalloyNatural Aging Behavior of Double-Sided MIG Welded A7N01-T5 Aluminum AlloyCharacterization and Modelling of the Precipitation Sequence of an Al-Mg-Si Alloy with Silicon Excess for the Prediction of the Mechanical Properties during AgeingMicrostructure and Mechanical Properties of a Cu-Pd-Ag Alloy Wire with Aging TreatmentThe Relationship between Mg Content and Extra-Hardening in Ultrafine Grained Al-Mg Alloy by SPDEffect of Aluminum Concentration on Damping Capacity during Annealing in AZ-Series Magnesium AlloyInhomogeneous Precipitation of the a-Phase in Ti15Mo Alloy Deformed by ECAPMicrostructure Evolution and Texture Formation Behavior during High-Temperature Deformation in M1 Magnesium AlloyEffect of Voltage on Mg-Li-Al Alloy Anodic Oxide FilmTexture Formation Behaviour during High-Temperature Plane Strain Compression Deformation in AZ91 Magnesium AlloyInfluence of Cr Content on Cellular Precipitation Behaviour of Ni-38Cr-3.8Al Alloy with Lamellar StructureInfluence of Grain Size and Thermo-Mechanical Conditions on the Activation Energy for Super Plastic Flow in Ti-6Al-4V AlloySuperplastic-Like Elongation by Transition of Deformation Mechanism from Grain Boundary Sliding to Solute Drag Creep in Fine-Grained Al-Mg Solid Solution AlloySpontaneous Microstructural Evolution and Magnetic Properties of Nano-Scale Particles Comprising Ferromagnetic Element Atoms in Cu-Ni-Fe and Cu-Ni-Co AlloysPhase Stability and Mechanical Properties of Metastable Ti-X-Sn-Zr (x=Cr, Nb or Fe) AlloysSynthesis and Characterization of Nanostructured Mechanical Cu-Fe-Co AlloyMicrostructure of Co-Cr-Fe-Mn-Ni-Cu and Co-Cr-Fe-Mn-Ni-Ag High Entropy Alloys with Liquid Phase SeparationActivities of Non-Basal Slips in Deformation of Magnesium Alloy Single and Poly CrystalsStudy of Mechanical Degradation and Microstructural Characterization in a Ni-Based Superalloy Component of a Gas TurbineDevelopment of Low-Cost Titanium-Manganese Shape Memory AlloysFabrication of the Beta-Titanium Alloy Rods from a Mixture of Pure Metallic Element Powders via Selected Laser MeltingFrom Pre-Alloyed Rod to Gas-Atomized Powder and SPS Sintered Samples: How the Microstructure of an Nb Silicide Based Alloy EvolvesForming Behaviour at Elevated Temperature of a Laser Heat-Treated AZ31 Magnesium Alloy SheetUltra-Fine Grained Ti-15Mo Alloy Prepared by Powder MetallurgyThe Influence of Alloy Composition and Heat-Treatments on the Shape Memory Properties in a Cu-Sn-X AlloyResidual Stress Analysis of A362 Aluminum Alloy Gear Case Using Neutron DiffractionBehavior of Hydrogen in Tensile-Deformed Aluminum AlloysMelting and Solidification Behavior of High-Strength Aluminum Alloy during Selective Laser MeltingWide Scale Approach in Aluminium Alloys Microstructure Analyses from Component to Atom Scale in Order to Understand Behavior of New AlloysPreparation of TiAl Intermetallic Alloy Precursor Using Slow Reaction Synthesis ProcessImpact of Hydrogen Content on the Thermal Stability of Hydride Phases in Zirconium AlloysRelationship between Microstructure and Magnetic Properties of Nano-Scale Particles Formed in Cu-Ni-(FeCo) AlloysStudy of Asymmetric Rolling to Improve Textures and r-Values of Aluminium Deep Drawing AlloysA Subsurface Fatigue Crack Generation Model in near Alpha Titanium at Low TemperatureDynamic Recrystallization during Warm Accumulative Asymmetric Roll Bonding (AARB) of the AA1050 AluminiumEvolution of Young?s Modulus of Cold-Deformed Pure Aluminium in a Tension TestNumerical Analysis of Horizontal Twin-Roll Casting for Mg-AZ31Effects of Mo Addition on Deformation Behavior of Metastable Beta-Type Ti-Mn Single CrystalsEffects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam MeltingDeformation Behavior of Fe-Al Single Crystals Containing Fe2AlTi PrecipitatesTransport and Thermodynamic Properties of CeRu2Al10 Controlled by Pressure at around Critical PressureThermo-Mechanical Treatment of Titanium Based Layered Structures Fabricated by Blended Elemental Powder MetallurgyHot Deformation and Dynamic Recrystallization in Titanium AluminideCryogenic Sheet Metal Forming - An OverviewDevelopment of an Optimised Shielding Strategy for Laser Beam Welding of Ti6Al2Sn4Zr2MoPrecipitation Kinetics of AA6082: An Experimental and Numerical InvestigationMicrostructure and Texture of MX20 after Conventional Rolling and Rolling from Twin Rolled Cast StripSimulation of Thermal Phenomena in Reverse Strip-Rolling ProcessMagnesium Twin-Roll Casting Technology for Flat and Long Products - State of the Art and FutureMicrostructure Characterization of AlSi10Mg Fabricated by Selective Laser Melting ProcessMicrostructure Evolution of Ti-5Al-5V-5Mo-3Cr after Hot Deformation at Large and Moderate StrainsMaterial Flow in Lap Joint of Dissimilar Metallic Foils by Friction Stir Diffusion Bonding with Micro IndentationAnalytical Design of Superelastic Ring Springs for High Energy DissipationAn In Situ Observation of Slip Deformation in a Compressed Ti-Mo-Al Single CrystalSimultaneous Prediction of Bendability and Deep Drawability Based on Orientation Distribution Function for Polycrystalline Cubic Metal SheetsTemperature Dependence of the Yield Stress in a-Titanium Investigated with Crystal Plasticity AnalysisTemperature Dependence of Mechanical Properties in Dual Phase Ti-6Al-4VAdvanced Titanium Aluminides - How to Improve the Creep Resistance via Compositional and Microstructural OptimizationStrain Softening of Aluminum in Shear at Elevated TemperatureMicro-Scale Mechanical Behavior of Ultrafine-Grained Materials Processed by High-Pressure TorsionSuperplastic GBS Constitutive Equation Incorporating Average Grain Misorientation DependenceOrientation Dependence on Fatigue Fracture Behavior of Pure Mg Single CrystalsCube{100} Grains Nucleation during Annealing of S-Oriented Aluminum Single CrystalEffect of Shearing Distance on Mechanical and Electrical Properties for Cu-11Mn-4Ni Thin Plate Formed by Compression Shearing Method at Room TemperatureDeformation Twinning and Change in Mechanical Properties of Cu-15at%Al in Multi-Pass Cold RollingEffects of Homogenization-Free on the Microstructures of an Al-Mg-Si-Cu Hot-Rolled Plate for Automotive PannelThe Effect of Vibration Condition for Magnesium Dry Gravity Sorting by Vibrating Particulate BedCold Spray Manufacturing for Structural Materials for High Field Magnet ProductionTraveling Waves Induced by Sweeping Flows on Solidification InterfacesParameters Affecting Energy Absorption in Metal FoamsExplosion Welding: Process Evolution and Parameters OptimizationThe Effect of Oxygen on the Phase Composition and Heat Treatment Behavior of Ti-V AlloysFabrication of Cu-Al-Ni Shape Memory Alloy by Selective Laser Melting ProcessSelective Laser Melting of Inconel 718 under High Power and High Scanning Speed Conditions
In Situ Synchrotron Analysis of Twinning Stresses in an Aged Mg-4.5Zn AlloyThe Influence of Powder Particle and Grain Size on Parts Manufacturing by Powder Bed FusionDeformation Twinning Behavior in High Ni-Austenitic MaterialsMicrostructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam MeltingMicro-Alloyed Steel for ForgingsUltrasonic Rheocasting for Refinement of Mg Alloys Reinforced with LPSO PhaseMicrostructure and Properties of Cu-Cr-Zr-Ag AlloySynthesis of Cu-Ni-Al Shape Memory Alloy by Powder MetallurgyControlling Silver Ion Release from Ag-Based Nanocoatings by Plasma Surface EngineeringStress Gradient Determination in Anti-Corrosion Multilayer CoatingInvestigation of the Splat Deposition Behavior onto a Composite Coating in Cold SprayCladding of Stellite-6/WC Composites Coatings by Laser Metal DepositionHigh Pressure Cryogenic Nitrogen Jet for Clean Coating Removal: Experimental Study of Polyamide AblationStudy and Development of a Multilayered Coating to Improve Hard Metal Cutting Tools PerformancesSuperhydrophobic and Corrosion Protective Coating on AluminiumDry Surface Preparation Using Supercritical Cryogenic Nitrogen Jet Improves the Adhesion Strength of Cold Gas Sprayed Coatings (SCNCS)Au-Ni and Rh Electroplated Coatings Evaluation for ITER Ion Cyclotron Resonance Heating Radio-Frequency Sliding ContactsResponse of Cold Sprayed Ti6Al4V Coatings to Solid Particle Erosion and Micro-Scratch Wear ProcessesOscillating Contact Wear in Cold Sprayed Ti6Al4V Coatings for Aeronautical RepairsThe Effect of Potential on Surface Characteristic and Corrosion Resistance of Commercial Pure Titanium Processed by Anodic Oxidation TreatmentNovel Methodology for the Selection, Dosing and On-Line Control of Corrosion Inhibitors for Industrial Acid PicklingThe Effect of Flue Gas Environment on the Corrosion Behavior of the Sulfuric Acid Dew-Point Corrosion Resistant SteelInfluence of Rolling Force on Corrosion Resistance of Interstitial-Free Auto Sheet SteelAn Experimental Method to Evaluate the Effect of Welding Residual Stress on Corrosion Fatigue Properties of Structural Steel in Synthetic SeawaterMechanical Fields on Cross-Shaped Specimens for Stress Corrosion Cracking of Cold-Worked Austenitic Stainless SteelsElectrochemical-Based Characterization of the Corrosion Fatigue Behavior of Creep-Resistant Magnesium Alloys DieMag422 and AE42The Influence of Ni Content on the Corrosion Resistance of Cu-Ni-Sn-C-P Sintered Alloys in Poor Quality FuelRelationship between Microstructure and Exfoliation Corrosion in Mg-14mass%Li-3mass%Al Cold-Rolled AlloyHot Corrosion of Alloy 617 OCC in Simulated USC Power Plant EnvironmentChange of Intergranular Corrosion Behavior along the Thickness in a Friction-Stir-Welded 7N01-T5 Aluminum AlloyEffect of Sn, Zn and Bi Addition on Corrosion Characteristics of Magnesium Alloys Sintered by Spark Plasma SinteringMicrostructure and Corrosion Behavior of Extruded Mg-Zn-Er AlloysCleaning Optimization of Hot-Dip Galvanized Steel Surfaces in Preparation for Paint ApplicationImprovement of the Surface Properties of Low Temperature Plasma Nitrocarburized Martensitic Precipitation-Hardening Stainless Steel by Aging TreatmentEffect of Gas Content and Treatment Temperature on the Characteristic of Surface Layers of Low Temperature Plasma Nitrided 316L Austenitic Stainless SteelEffects of Post-Drawing Surface Heat Treatments on the Strength and Torsional Ductility of High Strength Steel WireFirst-Principles Study of Chlorine Adsorption on Clean Aluminum SurfaceMicro-Nanostructured Silicone Rubber Surfaces Using Compression MoldingSimple Fabrication of Superhydrophobic Surfaces Using Atmospheric-Pressure PlasmaEffects of Surface Treatment for A5052 Aluminum Alloy on Adhesiveness between A5052 Aluminum Alloy and Engineering PlasticsEffects of Surface Structure and Hydrogen on the Fatigue Strength of Electroless Nickel-Phosphorus Plated Al-2%Cu AlloyMechanical Property of Magnesium Alloy Surface with Dense OxideA Laser Shock Approach to Cold SprayEffect of Interface Damage on Loosening Behavior of Acetabular Cup Subjected to Cyclic LoadingAmorphous Alumina Films Efficiently Protect Ti6242S against Oxidation and Allow Operation above 600 ?CSerial Production Applications and Application Development with Focus on Cold Spraying at Obz InnovationControl Quality on Process of Laser Heat TreatmentUnderstanding Cold Spray for Enhanced Manufacturing SustainabilitySuperhydrophobic Coating Bioinspired on Rice Leaf: A First Attempt to Enhance Erosion Resistance Properties at Environmental Conditions with Ceramic ParticlesCorrosion Mechanisms of New Wrought Mg-Al Based Alloys Alloying with Mn, Zn and SnCoating Toughness Estimation through a Laser Shock Testing in Ni-Cr-B-Si-C CoatingsCold Spray of Mixed Sn-Zn and Sn-Al Powders on Carbon Fiber Reinforced PolymersMass Transfer in Yb Silicate Environmental Barrier Coatings at High TemperaturesDevelopment and Properties of Cast TiAl Matrix In Situ Composites Reinforced with Carbide ParticlesElaboration of Architectured Copper Clad Aluminium Composites by a Multi-Step Drawing ProcessFoaming and Compressive Properties of A359/SiCP Metal Matrix CompositesCompetitive Reactions and Formation Mechanism of Microstructures in Mg/Cu Super-Laminate Composites during Initial HydrogenationOn the Study of a TiB2 Nanoparticle Reinforced 7075Al Composite with High Tensile Strength and Unprecedented DuctilityEvaluation of Effective Thermal Conductivity of Metal Matrix Composites by Using Image-Based CalculationEffect of Slit Shape on Joinability of Zircaloy - SiC/SiC Composite Tube Joint with Titanium PowderEffect of Processing Route on Microstructure and Mechanical Properties of a Ti-3Al-2.5V/TiB CompositeDevelopment of Tool Steel Matrix Composites with High Thermal ConductivityTensile Fracture of TiB Whisker Reinforced Ti Alloy Matrix CompositesMetallic Composites as Form-Stable Phase Change AlloysStructural Stability of Hafnia-Based Materials at Ultra-High TemperatureJoining of AlN and Al with Compositional Graded Layer by Centrifugal Mixed-Powder MethodTribological Properties of Aluminum and Silicon Borides at High TemperaturesSpark Plasma Sintering of High-Energy Ball-Milled ZrB2 and HfB2 Powders with 20vol% SiCMultilayer and Fiber Metal Laminate Materials Hydro-BulgingRapid Synthesis of Li2O-(Nb/Ta)2O5-TiO2 Solid Solution Having Superstructure by Smart Processing TechniquesTexture and Mechanical Properties of IF Steel/Polyethylene/IF Steel LaminatesCopper Effect on Mechanical Properties of Al-CNF Composite Material Elaborated by Liquid Metallurgy with Induction MeltingDislocation Densities in Dispersion-Strengthened Copper with Aluminum Oxide from X-Ray Line Profile AnalysisComparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4VControl of Mechanical Properties of Functionally Graded Dual-Nanoparticle-Reinforced CompositesDevelopment of Ultra-High Temperature Ceramics: From Monoliths to CompositesWear Behavior of Cenosphere Dispersed Titanium Composite Foam Developed by Powder Metallurgy RouteCharacteristics and Formation Mechanism of the Interface of Mg/Al Bimetallic Composites Prepared by Lost Foam CastingParticle Distribution and Mechanical Properties of Nano-SiCP/Al-Cu CompositesInvestigation of Crack Initiation in Glass Substrate by Residual Stress AnalysisEffect of Cooling Rate on Intermetallic Compounds Formation in Sn-Ag-Cu-In SolderTensile and Fatigue Properties of Miniature Size Specimen of Sn-3.5Ag-0.5Cu-0.07Ni-0.01Ge Lead-Free SolderA Study on Reliability of Pillar-Shaped Intermetallic Compounds Dispersed Lead-Free Solder JointEffects of Sputtering Pressure on (ZnO)x(InN)1-x Crystal Film Growth at 450?CPhotoluminescence of (ZnO)0.82(InN)0.18 Films: Incident Light Angle DependenceCross-Correlation Analysis of Fluctuations of Interactions between Nanoparticles and Low Pressure Reactive PlasmasDifferences in Morphologies of GaN-Based Nanocrystals Grown on Metal-Foils and Multi-Crystalline Si SubstratesInternal Stress Evaluation on SiC Dices after SLID ProcessElectron Diffusion Length and Charge Separation Efficiency in Nanostructured Ternary Metal Vanadate PhotoelectrodesTowards Additive Manufacturing: Pumping Flow Rate with Time-Dependent Material Rheology in 3D Cementitious Material PrintingAdditive Manufacturing of Titanium Parts Using 3D Plasma Metal DepositionOne Photon 3D Polymerization via Direct Laser WritingSignificant Benefits of 3D Screen Printing for Manufacturing Micro-Channel Heat ExchangersDesign of Additively Manufactured Lattice Structures for Tissue RegenerationHeat Treatment Behavior of the 18Ni300 Maraging Steel Additively Manufactured by Selective Laser MeltingCompositional Optimization of In718 Superalloy Powder for Additive ManufacturingAdditive Manufacturing of a CNT/Al6Si Composite with the Nanolaminated Architecture via Cold Spray DepositionDirect Laser Additive Manufacturing of Ceramics by Powder DepositionFabrication and Tailoring Interface Structure of Diamond/Al(and Al12Si) Composites for Heat Sink Applications by Vacuum Hot Pressing and Selective Laser MeltingDeveloping New Materials for Electron Beam Melting: Experiences and ChallengesThree Dimensional Smart Processing by Ultra Violet Laser Lithography of Ceramic Additive ManufacturingHydrogen Release from Oxidized Titanium HydrideIncreasing the Electrical Conductivity of Layered Double Hydroxides by Intercalation of Ionic LiquidsNickel Supported Modified Ceria Zirconia Lanthanum/ Praseodymium/Yttrium Oxides Catalysts for Syngas Production through Dry Methane ReformingEngineering Solutions in Scale-Up and Tank Design for Metal HydridesThe Influence of Gas Diffusion Media Morphology on Hydrogen Fuel Cell PerformanceSuperhydrophobic and Highly Oleophilic Polystyrene Fibers (PS) with Delayed Freezing Time and Effective Oil AdsorptionNew Sustainable Hybrid Porous Materials for Air Particulate Matter TrappingSynthesis of Fluorescent Ag Nanoclusters for Sensing and Imaging ApplicationsPolymer Interphases in Adhesively Bonded Joints ? Origin, Properties and Methods for CharacterizationA Theoretical Analysis of the Rheological Parameters Associated with DDRXThe Avrami Kinetics of Dynamic Recrystallization in Nickel-Niobium AlloysForensic Analyses of Stress-Strain Diagrams to Evaluate Contributions from MicrostructureA Numerical Thermal Analysis of the Heating Process of Large Size Forged IngotsPrediction of Steel Transformation Temperatures Using Thermodynamic Modeling and Design of Experiments (DOE)Multiscale Approach for the Modeling of Chemo-Magneto-Thermo-Mechanical Couplings ? Reversible FrameworkEnergy of Small Angle Tilt Boundary in AlStructural, Electronic and Mechanical Properties of Perovskite Oxides LaMO3 (M = Mn, Ni) Compounds in the High and Low Symmetric Phases by First Principle CalculationMastering of the Filling Stage in Low Pressure Sand Casting ProcessUse of a Zener Approximation for Heat Transfer Analyses of Quasi One-Dimensional Welding ProblemsDuctility and Stability in Metallic MaterialsHot Forming Optimization of ZK30 Magnesium AlloyEvaluation of a Characteristic Temperature in the Relaxation of Metallic Glass Forming LiquidsDevelopment of an Anti-Trapping Current for Phase Field Models Using Arbitrary CALPHAD ThermodynamicsOn the Challenges and Prospects of the Superplastic Forming ProcessA First-Principles Study of the Al (001)/Fe(0-11) InterfaceMetaheuristic Ab Initio Optimum Search for Doping Effects in Nanocarbons3D FEM Simulation of the Effect of Cooling Rate on SDAS and Macrosegregation of a High Strength SteelWear Behaviour of Two Different Cemented Carbide Grades in Turning 316 L Stainless SteelStudy on the Statistical Errors in X-Ray Stress Measurement with Two-Dimensional DetectorEvaluation of Railway Rails Suffered from Rolling Contact Fatigue Using X-Ray Generalized cosa MethodPortable System for the Measure of Efficiency in Arc Welding ProcessesProving the Preclusion of Data Manipulation Using Parallel Data Acquisition in ChromatographySteBLife ? The Enhanced Short-Time Evaluation Procedure for Materials Fatigue Data GenerationMicrostructure Characterisation of Advanced Materials via 2D and 3D X-Ray Refraction TechniquesStudy of Consistency between Two-Dimensional, sin2?, cosa and Fourier Transformation Methods for X-Ray Residual Stress Measurement by Debye Ring SimulationRecycle Processor for Commercial Aircraft Wing TrimmingsStrength and Axial Behavior of Cellular Lightweight Concrete-Filled Steel Rectangular Tube Columns under Axial CompressionImplementation and Use of a Laser-Ultrasonic System in a Deformation- and Quenching DilatometerQuality Assessment of Friction Stir Welded Joints ? Using the Fundamental Anti-Symmetric Lamb Wave ModeValidation of Material Parameters of Collagen Compositions for the Application as a BioinkImproved Syringe Extruder for Improved Processing of Biological MaterialsFabrication and Validation by Micromilling for Bioreactor PrototypingAnalyte Tracking for Novel Bio-ApplicationsMechanical Performance of Titanium Alloys with Added Lightweight Interstitial Element for Biomedical ApplicationsMicrostructure, Texture and Mechanical Properties after Cold Working and Annealing in a Biomedical Ti-Nb-Ta AlloyManufacturing of Biomedical Ti-Based Alloys with High Oxygen Content and Various Amount of Beta-Stabilizing ElementsThe Improvement of Durability of Biodegradable Magnesium Alloy by Using Bio-Inspired CoatingBiofunctionalization of Ceramic Implant Surfaces to Improve their Bone Ingrowth BehaviorLaser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium AlloysTissue Engineering Strategies to Promote Bone RepairOnline Glucose Measurement in DMEM for In Vitro Cell CultureControl of Cell Adhesion on Titanium Dioxide by Light IrradiationMonitoring of Cytotoxic Induced Cellular Displacements by Utilizing Electronic Speckle Pattern InterferometrySample Analysis for Novel Medical ApplicationsDevelopment of a Smartphone Based Reader for the Quantitative Analysis of Lateral Flow AssaysOxidative Plasma Treatment of Fluorocarbon Surfaces for Blood-Contacting Applications
