Sonstiges, Englisch, Band Volume 657, 1128 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 657, 1128 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-971-8
Verlag: Trans Tech Publications
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 213 papers are grouped as follows:
Chapter 1: Advanced Machining Technologies and Surface Engineering,
Chapter 2: Forming Technologies,
Chapter 3: Electrophysical, Welding and Assembly Technologies in Manufacturing,
Chapter 4: Advanced Materials,
Chapter 5: Researching and Designing of Manufacturing Equipment, Machine Parts and Mechanisms,
Chapter 6: CAD/CAM/CAE Technologies in Design and Manufacturing,
Chapter 7: Flexible Manufacturing, Automation and Robotics in Technological Processes,
Chapter 8: Production Management and Product Design,
Chapter 9: Innovative Technologies in Engineering Education
Autoren/Hrsg.
Weitere Infos & Material
Research Regarding the Relationship of the Axial Cutting Force at Drilling of the Stainless Steel X15CrNiSi20-12Analysis of the Relationship of the Cutting Tool Wear at Drilling of the Stainless Steel X15CrNiSi20-12The Method of Design and Manufacturing of the Gear Hobbing Cutter with BulgesStudy of Residual Stresses Distribution Generated from Milling of Magnesium Alloy PartsInfluence of Cutting Parameters on Surface Morphology of Austenitic Stainless Steel after TurningSide Mill Tool Profiling for Generation of Helical Surfaces Determined by Reverse EngineeringEquipment for the Study of Machinability by Drilling under Constant Force FeedEffect of Minimum Quantity Cooling Lubrication (MQCL) on Chip Morphology and Surface Roughness in Turning Low Carbon SteelsInfluence of Minimum Quantity Cooling Lubrication (MQCL) on Chip Formation Zone Factors and Shearing Force in Turning AISI 1045 SteelContributions to Multi-Criteria Optimization of Cutting ProcessingExperimental Research of Effective Cutting Speed Influence on Surface Roughness in Ball End Milling of C45 Material with Hardness 34 HRCAspects Concerning the Possibility to Measure the Radial Deflection of a Work Piece Obtained into a Turning ProcessEstimation of Possibilities of the Productivity Rise at Turning of Hard-Processing MaterialsExperimental Study of Vibrations in Face Milling CuttingDetermination of Stressed-Deformed State of Fine Disc Tools with Inner Cutting Section under Conditions of their Pre-StressingDynamic Behavior of Long Turned WorkpiecesMachinability Aspects Investigations in Hard Milling of AISI W1 Hardened Tool SteelMachinability by Milling of Gray Cast IronA Review of the Main Modeling Methods for Ball Nose End Milling ProcessesDetermination of Optimal Working Parameters of the Combined Burnishing - Turning Process by Applying the Method of Response SurfacesResidual Stresses Generated by the Combined Burnishing - Cutting Process in the Worked PartsOn the Kinematic Structure of Cold Forming Machine-Tools with Several Main Effector ElementsResearches on the Wear of the Stamped Punches Heat Treated Differently Using the Method of Deviation from CircularityDesign Methodology of Laminating ToolsNumerical Simulation of Plastic Deformation Process of the Glass Mold PartsApplication of the Taguchi Optimization Method in Order to Improve the Quality of the Conical Mini-Parts Obtained by Forming ProcessExperimental Determination of Force and Deformation Stress in Nanostructuring Aluminum by Multiaxial Forging MethodDigital Scanning Method for Thickness Analysis of Hollow Parts Manufactured by Incremental Forming on a CNC LatheInfluence of Processing Parameters on the Quality of the Superficial Layer after Processing Surfaces by Plastic DeformationSoftware Tool Used for Simulation of Metal Spinning Process for Complex Rotational PartsAnalysis of Geometry Deviations in Case of Conical Mini-Parts Obtained by Forming Process from Copper-Zinc Alloy (CuZn37) SheetsA Study of Single Point Incremental Forming by Finite Element AnalysisThe Influence of Dimensional-Type Mathematical Model for Cylindrical Deep Drawing on the Distribution of Extreme Unitary StressesResearches Regarding the Usage of Titanium Alloys in Cranial ImplantsContributions Regarding Incremental Forming Process of Bimetallic SheetsAn Optimized Methodology for Process Quality Analysis and Monitoring Activities in Case of Sheet Metal Bearing Cages StampingStudy Concerning the Maximal Depth of a Cylindrical Part Made from Tailor Welded BlanksDesign and Implementation of a Device for Nanostructuring of Metallic Materials by Multiaxial Forging MethodElectrochemical Discharge Grinding of Chrome Alloyed Steels in Inorganic SolutionsArtificial Intelligence Model for the Prediction of Cut Quality in Abrasive Water Jet CuttingStudy on Process Parameters in Fiber Laser Micro-Cutting TechnologyOptimization of Laser Cut Quality Characteristics Considering Material Removal Rate Based on Pareto ConceptExperimental Investigation on AECM of High Speed SteelA Simulation of Spot Welding ProcessFinite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting TechnologyFinite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting TechnologyExperimental Study on Unsynchronized Ultrasonic Assistance of Electro Discharge Machining ProcessOptimization of Reactive Sputtering Technology for Hard Coatings DepositionShear Resistance of Joints Spot Cold Pressure WeldingStudy on Identification and Classification of Causes which Generate Welds DefectsStudies on the Corrosion Behavior of Deposits Carried out by Thermal Spraying in Electric ARC ? Thermal ActivatedExperimental Study of the Laser Cutting Process on 1C45 - 3 mm SteelExperimental Studies on Adherence Resistance of Thermally Sprayed Metallic CoatingsAspects Regarding the Surface Quality of the Laser Engraved GlassSome Researches Regarding the Durability of the Metal Carbide Cutting Inserts Coated with Ti Thin LayersModelling and Optimization Study on Hardness of Ni-Fe Alloy Thin Films through Electroplating ProcessInfluence of Some Factors on Surface Roughness Parameters at Electrical Discharge MachiningInfluence of the Spraying Distance and Jet Temperature on the Porosity and Adhesion of the Ti Depositions, Obtained by Thermal Spraying in Electric Arc - Thermal ActivatedDetermining the Coefficients of Fusion and of Weld Deposition at Mechanized Mag-C Welding with Solid Wire and Cored WiresExperimental Investigations on Aluminium Ultrasonic Welding ParametersStudy on Processing of Titanium Aluminide Alloy Using Electrical Discharge MachiningNonconventional Machining Based on Electrical Charged Particles Motion in LiquidInvestigation of the Electro-Discharge Open-Hole Machining on the Structural Behavior of Carbon Fiber Reinforced PolymersAnalysis of Residual Stresses in Steel Welded Parts Using UltrasoundsExperimental Research on Ultrasonically Welded CopperECDM Drilling Process Analysis via Taguchi MethodGeometric Deformations of Welded Metallic StructuresSome Methods and Techniques for Optimizing Dimensional Processing Using Complex, Electrical and Electrochemical ErosionUsing Delmia V5 for Human Activity Improvement in an Assembly Line ProductionProduction Orders Sequencing in Mixed-Model Assembly LinesPlanning, Monitoring and Controlling Assembling Activities for Oil Well Drilling RigsActive Screen Plasma Nitriding Efficiency and EcologyExperimental Studies Regarding the Mechanical Behaviour of Silicon-Coated and Uncoated P.A. 6.6 FabricsStress-Strain Characteristics of Polyester Composites with Singlewall, Multiwall and Functionalized Carbon NanotubesNiTi Shape Memory Alloy Active Element Behavior in Long Time Solicitation ConditionsImplementation of Shape Memory Alloys as Active Elements in Injuries Recuperative EquipmentBiocomposites?- State of the ArtInvestigations Regarding the Influence of Surface Topography on Emissive Properties of MaterialGamma Titanium Aluminides Behavior at High Temperature Static Short-Term StressImprovement of Properties of Aluminum Bronze CuAl7Mn3 by Heat TreatmentsAlloys with Acoustic PropertiesTribological Study in Case of Polymeric Composite Materials Reinforced with Unidirectional Carbon Fibers Having Stratified StructureExperimental Determining of Mechanical and Elastic Characteristics for the Material Used in the Manufacturing of Cardan CrossesTheoretical and Experimental Research on Mechanical Behavior of Layered Composites LaminatesProfilometric Evaluation of the Worn Surfaces under Dry Reciprocating Wear Conditions of a Composite Material to Repair Brass Made PartsPneumatic Muscle Actuated Parallel Asymmetric Gripper System with a Mobile and a Fixed JawProcedure against Overturning of the Road-Rail Machines Load Distributions on WheelsCombined Constructive Solutions for Increasing Cast C-Frame Stiffness of Mechanical PressesFunctional Assessments of Dynamics of the Vibratory-Driven Equipments with Belt TransmissionsDynamic Diagnosis of Elastic Coupling Transmissions of Technological Equipments Based on Joint Time-Frequency EvaluationsNew Algorithm for the Gauges DesignExperimental Research Regarding the Influence of Hydraulic Resistances on the Hydrostatic Guideways StiffnessDesigning Multispeed Gear Pitch CurvesBraking Solution for a Hydraulically Driven Linear Pallet Changer MechanismConsiderations Regarding the Functionality of Chuck Collets in Mechanical SystemsInfluence of Resistant Forces on the Positioning Precision of Kinematic Feed Chains Used on CNC Machine ToolsGeometric Aspects and Particularities in the Functioning of a Reductor with BallsExpanding Research in the Field of Asymmetric Gear Design and ManufacturingLooking for a Mathematical Solution for a Self-Centering DeviceExperimental Research Regarding Static Rigidity in Axial Direction of "Narrow" Modules from Modular Fixtures StructureStudy of Water-Oil Emulsion StabilityThe Tightening Accuracy of Workpieces in the Multiple Clamping DevicesResearch on the Main Parameters of the Turbo-Blower Axes TiN Covering ProcessContributions to Soil Resistance Mapping for Increasing Parts Durability for Agricultural MachineryInfluence of Guideways Misalignment on the Positioning Precision of Kinematic Feed Chains Used on CNC Machine ToolsExperimental Research Regarding the Influence of Pocket Pressure Values on the Stiffness of Hydrostatic GuidewaysResearch Regarding Improvement of Dynamic Behaviour for High-Ratio Planetary GearsModelling and Simulation with Fine Element Method to the Processing of Sheet Metal FinningInnovative Solutions for a Shoe Sole CleanerMeasuring the Impact Forces within the Cleaning Nozzles Sewage SystemDevice for Wire Electrical Discharge MachiningConstructive and Functional Modelling of a Pneumatic Muscle Actuated Symmetric Gripper System with Two Mobile JawsPhotogrammetric Scanning and Applications in MedicineSound Reasearch in Precessional TransmissionAnalysis of a Composite Blade Design for 10 kW Wind Turbine Using a Finite Element ModelResearch on Optimization of a Chain of Dimensions that Determine the Parallelism between Two AxesApproach of a Particle Statics Problem by Using the Bond-Graph Modeling MethodBearing Scuffing Detection and Condition Monitoring Using Virtual InstrumentationOn-Line Running Tests for Validating the Numerical Simulations of the Vertical Dynamic Behavior in Railway VehiclesThe Influence of Changing the Parameters of Electrical Components Implementing the Active Reduction of VibrationComparative Study of Blade Shape Design of Centrifugal Fan ImpellerFunctional Diagram for Modeling the Electromagnetic Ball Valve with Cylindrical SeatLinear Motion Actuator Using Magnetorheological Fluid PropertiesAnalysis of the Collapse Behaviour Regarding TWB Crash-Boxes in Conjunction with the Construction TechniqueSimulation and Mathematical Modeling on Bending of Pipe Subjected to Internal PressureThe Method for Determining the Vibration-Damping Elements for the Mechanical System to Obtain the Desired Amplitude ValueThe Effect of Tooth Wear on the Dynamic Transmission Error of Helical Gears with Smaller Number of Pinion TeethHigh Speed Impact Virtual Studies Made on Projectiles Models for Designing Shields Based on Innovative MaterialsDynamical Charactersitics of the Discrete ? Continuous Mechatronic System Obtained by Means of Exact and Approximate MethodsAspects of Seismic Hazards Caused by the Mining and its SequelaeSolutions for Measuring the Position Deviation for Internal Keyways ? Case StudySimulator for a Natural Gas Storage Realised in Depleted DepositResearches Regarding the Influence of Temperature on a Weigh-in-Motion Hydraulic SystemNoncircular Gears Designed by Geometric HypothesisMethod for Redesign of District Heating Networks within Transition from the 2nd to the 3rd GenerationUsing Parameter Deviation Function for Estimating the Calibration Life of MicrometersPosition Control System of a Trunk in an Upward AirflowExperimental Study Regarding the Computation of the Effective Power of a Spark-IgnitionComparison and Evaluation of Information Security Models for Access ControlOn the Right Parameterization of 3D Models - Case StudyThe Pinion Cutter for Profiled Holes ? Graphical Method in CATIAExperimental Framework for FEA Analyses of 3D Geometry of a Connecting RodSmart Engineering Design of a V10 Engine Using Digital Prototyping TechnologiesImpact Analysis of an Oxygen Mask Locking Panel of Aircraft Using Finite Element ModellingParametric Modeling CAD-CAM of the Ankle and Pathological Related SituationsCad Development - User Custom Drafting ExtensionsThe New Approach to Design Features IdentificationThe Practical Approach to Freeform Shape Elements Reverse EngineeringConsideration about Elastic Couplings Modeled in CATIAComputer Aided Analysis of Composite Structural ElementsVirtual and Experimental Studies about Human Walking - Virtual Lower Leg Environment - Innovative Design of Tibia NailSoftware for Computing Lenticular Compensators (Bellows)The Behavior of the Virtual Human Head-Neck System during the Main MovementsMethods for Checking the Symmetry of the Formula One Car NoseStudy and Improvement of Road Tunnels Fire Behavior Using PyrosimReplica Fabrication of a Greek Paleontological Find Utilising Laser Scanning and Fused Deposition ModelingOn the Generation of Complex Trajectories Using a Robotic System with Six Degrees of FreedomCase Study of Manufacturing Information Acquisition System (MIAS) in Automated Continuous Production SystemOptimization through Simulation of Poly-Articulated Mechanical Systems Used in Medical RoboticsContributions to the Design of the Load Station Concept Used at the Flexible Manufacturing CellInverse Kinematics for a 7 DOF Robotic Arm Using the Redundancy Circle and ANFIS ModelsRobotic Elephant's Trunk Arm with Flexible Spatial PositioningStructural Optimization of an Automatic Pallet Changer Mechanism Using the Tree-Graph MethodInfluence of Dimensional Deviations on the Positioning Accuracy of Robots with Delta 3 DOF Parallel StructureAbout the Accuracy of Positioning of a Linear Robot Equipped with a High Resolution Optical SystemRobot Vision Application for Overlapped Work PiecesModel of the e-Manufacturing Environment as the Multi-Agent SystemSmart Adaptive CNC Machining - State of the ArtProcedure of System Control Using Distributed Parameters through Discrete FinitisationPareto Optimality of Production Schedules in the Stage of Populations Selection of the MOIA Immune AlgorithmThe Description of a Distributed Parameter Process through a Finite Discrete Dimensional SystemElements of Quality Analysis in Metallic Materials ProductionDetermining the Duration of R&D Processes through Monte Carlo SimulationQuality Management in Projects - Quality PlanningOn Romanian SMEs Development Using Concentrated Energies Technologies Based on Updated Greiner's ModelPatent Analysis by Business Intelligence Tools and Strategic Growth OpportunitiesContributions Regarding the Utilization of Neural Networks in SME's ManagementUsing Functional Requirements Formulation in Fault Tree Analysis Construction - A Way to Improve Product's DesignResults of Technology Foresight in the Surface Engineering AreaImproving Organizational Performance through the Use of the EFQM Excellence ModelOptimizing Decisional Process by Applying the Multi-Criteria AnalysisValidating Algorithms and Methods Destined for Information System Design Meant for the Business Environment Using Simulated CompaniesSolutions in Limit Deviations for Optimum Dimensional Structures of Technological Processes of MachiningNoise and Vibration Pollution Reduction to a Mineral Aggregates Station through Rim Optimization in Order to Align at EU LegislationRisks Assessment Applied to Manufacturing Processes - Case StudyEnhance Competitiveness through Total Quality Management and its ComponentsContributions to the Normalization of the Control Systems Used for Quality Control of the Interior Body Parts Used in Automotive IndustryTransient States of Cyclic Production Planning and ControlThe Analysis of Performances of an Assembly Line in Synchronous Supply Managed with Kanban and Conwip MethodsInfluence of Production Flow Management Methods on an Assembly Line Supplied on StockEvaluating the Risk of Failure on Injection Pump Using Fuzzy FMEA MethodComparative Analysis of Awareness and Knowledge of APQP Requirements in Polish and Romanian Automotive IndustryQuality Planning of Parts Machine Production Based on Housing of Cylinder Head Milling MachinesLean Manufacturing Benefits in a Pharmaceutical Production PlantHolistic Product Analysis within Technological Changes, as Instrument for Product Sustainability ImprovementImplementation of the New Standard in the Field of Geometrical Product Specifications in Republic of BulgariaMethods for Selection of Measuring InstrumentsNeutrosophic Modeling of Investment ArchitecturesSustainable Development Achievements in a Database SystemCreative Design for Skin and Shape Using Advanced CAD SystemsConceptual Product Design Inspired from NaturePLM and Eco-Design of Electronic Products According with Circular Economy PrinciplesSome Aspects about Innovation Strategy of Firms in the IndustryAnalysis, Modeling and Simulation of Complex Regional Clusters Activities, Using Arena Simulation SoftwareInnovation as a Key Factor for Entrepreneurial ActivityAn Evaluation of the Ergonomics of the QWERTY KeyboardsEvaluation of Personality Traits for a Successful Career of EngineersPractical Approaches in the Design of Everyday Objects for the ElderlyOverview on Equipment Development OntologyModels of the Equipment of Drilling and Extraction Used in the Teaching ActivityEvaluating the Process of Introducing Project-Based Learning in the Curriculum of Engineering StudentsRomanian-French Collaboration for Master and Doctoral Studies in "Materials Engineering"Basics of the Graphical Representation of Parts - Views and Sectional Views
